die spotting press used for sale

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM Type: 44-3262H283-001 Inlet pressure: max. 35 bar Outlet pressure: 0 - 7 bar stainless steel ! Mint ! Dimensions: 140 x 140 x 100 mm

pressure: 200 t stroke: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 2300 kg dimensions of the machine ca.: 2.000 x 1.200 x 2.800 mm Control: Producer: HIDROLIKSAN YOM: new Type: HD 160 Thrust: 160 ton. Stroke: 400 mm Throat depth: 480 mm Total power requirement: 5,5 kW Distance between frames: 1.200 mm Cylinder-Ø: 120 mm Dimensions (LxWxH): 1.800 x 1.000 x 2.550 mm Weight: 1.400 kg Additional information: • solid, welded construction • pressure cylinder lateral adjustable • operating electrical per switch lever / • pressure indication per Manometer • material support per cylinder, adjustable in height • CE-mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dough section and knitting machine Sinmag SM-330Y semi-automatic - Semi-automatic roll press - Sharing and impact - Manufacturer: Sinmag Europe - 30 pieces - Model: SM-330Y - Dough insert: 750- 2400 grams - Unit weight: 25-80 grams - Machine weight: 340 kg - 400 Volt/ 3Ph/ 50Hz - Year of construction 10 / 2020

Stainless Steel Filter Press Manufacturer : Seitz Type: 40x40 Technical specifications : Stainless Steel Filter Press 40x40 4 filter plates 2 end plates VA Length 1,200 mm (for 12 plates) Wheel-to-wheel width 720 mm

Key data: 400 t, 160 mm

Nominal forming force of the press 400 t Table 1250x825 mm Dimensions of the ram 900x560 mm Lifting of the ram 30-160 mm Machine weight 22 T Power of the main electric motor 30 kW Dimensions L x W x H --> 1550 x 2900 x 3360 mm complete with press line = Production LASA, Spain year 2008 = - Decoiler 4 t - coil width 400 mm, coil outer diam. 1600 mm Coil inner diameter 450/550 mm, unwinding speed up to 25 m/min - Pre-feed machine RAPID PRESS max. width 420 mm, material up to 3 mm, max. speed 70 m/min - Documents, electrical diagrams, etc.

Dough dividing and rounding machine Bun press Fortuna Automat Size 3 Partial head reworked with stainless steel knife NEW Dough insert up to 2300g depending on TA Dough divider without knitting plate E-system NEW DGUV V3 tested Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled + Spare parts service Option: Platform or chassis Maintenance contract Warranty E-Box Service Package We have a wide range of bread presses!

Offer 25021 Technical data approx.: - Compressive force 250 t - Projection 360 mm - Table size approx. 1100 x 800 mm - Diarrhea hole in the table approx. 320 mm - Tappet area approx. 800 x 475 mm - Peg hole in the tappet mm - Plunger adjustability 110 mm - Stroke adjustment 30 - 140 mm - Max. stroke rate 45 1/min - Pneumatic connection 6 bar - Drive 400 V / 22 kW - Space requirement approx. W 1400 x H 2990 x D 2700 mm - Weight approx. 13 T

Filter press stainless steel Manufacturer : Seitz Type: A20 Z Technical specifications : Stainless Steel Filter Press 4x filter plates 2x End Plates

"Lower piston press => table/stroke from bottom to top". Technical data Manufacturer: Hans Schoen Year of construction: 1997 pressing force: 500t table clamping area: 640mm x 800mm mounting height: 380mm stroke: 150mm Find more here - /

The Hamburger HYPM 70 is a press brake machine manufactured by Hamburger Werkzeugmaschinen GmbH, a German company specializing in the production of metalworking machinery. The HYPM 70 model was introduced in 1993 and is a hydraulic press brake designed for bending and shaping sheet metal. It has a bending length of 2,050mm and a pressing force of 70 tons. The machine is capable of achieving a bending speed of 10mm/s and a return speed of 90mm/s, making it suitable for both small-scale and large-scale production. The HYPM 70 features a user-friendly interface with a digital display for accurate and precise bending measurements. It also comes with a range of safety features, such as a light curtain and a safety guard to protect operators from potential hazards. Overall, the Hamburger HYPM 70 is a reliable and efficient machine for metalworking and has been used by a wide range of indust ...

Höfer Press for sale. Model: HKP 260 + HKP 40 Year: 2005 Dimensions: Dimensions of the HKP260 (for transport): L x W x H 5100 x 2300 x 3000 mm Dimensions of the HKP40 (for transport): L x W x H 3900 x 2300 x 2400 mm Dimensions of each hydraulic unit: L x W x H 1400 x 1400 x 600 mm Loading table dimensions: L x W x H 4900 x 2100 x 1100 mm Outfeed table dimensions: L x W x H 2900 x 2100 x 1100 mm Heating unit dimensions: L x W x H 1400 x 500 x 1300 mm (2x) Main control cabinet dimensions: L x W x H 2000 x 1000 x 400 mm Dimensions of entire system ready for operation: L x W x H 14600 x 2600 x 3000 mm Weight of the HKP260 press (for transport): approx. 13000 kg, all attachments removed Weight of the HKP40 baler (for transport): approx. 6300 kg, all attachments removed Weight of the hydraulics: approx. 350 kg Weight of the switch cabinet: approx. 400 kg Weight of the heaters: ...

SMG 320 cold forming press for sale. Year of build 1981 Model HPU 315-1300/1150 The machine has a crack in the head piece. Drive power: 2 x 55 KW Oil volume of one tank filling 3800 liters Maximum ram force: 3200 KN Drive cylinder: 3 pieces Cylinder 1: 2000 KN Cylinders 2+3: 600 KN each maximum adjustment: 310 mm Find more here - / Contact us at -

2004 Wagner WDSP II 10000 Press Find more here - / Contact us at -

2004 Alphatech Model RPS4000 Description: Electro-hydraulically driven frame press Series: Type:RPS 4000 Date of manufacture:12.2003 plunger force From approx. 4000 kN kN plunger force Up to approx. 916 kN kN plunger stroke approx. 600 mm Installation table - column max. 1050 mm Max. plunger rapid speed approx. 600 mm/sec Max. Splunger working speed approx. 41.7 mm/sec Max. Return speed approx. 440 mm/sec Table surface (WD) approx. 900965 mm Full volume Hydrauliko! HLP 46 approx. 5300 litres Main drive power 290 kW+ 255kW + 130kW Control voltage 230 VAC/ 24VDC Operating voltage 400 V /50 Hz Colour scheme: System RAL 1014 Control cabinet, control panel and hazard labelling RAL 2002 Find more here - / Contact us at -

Liebergeld Li-transmatic Colombo Agostino for sale. Year of build 1990 Model G 400/1100/250/5 Nominal pressing force: 4000 KN Stroke : 250 mm Infinitely variable stroke rate: 20 - 60 1/min Table top usable, width x depth: 1100 x 900 mm Plunger plate usable, width x depth: 1050 x 800 mm Installation height, bottom stroke, top adjustment: 720 mm Vertical adjustability of the ram: 20 mm Table ejector cam-controlled Find more here - / Contact us at -

Pressure heater with oil tank from Viessmann. The heater is permanently installed in a sea container and has only been in operation for 16 hours! Find more here - / Contact us at -

A vulcanising press with 4 shelves, it was purchased as a spare for the currently used one and has been standing unused since new, in total it has worked for us 0h. Model XL8-350T-700x700x4 l´LC Pressure 350T 700x 700mm thickness 6()mm Hotplate resistance Ra:,I .6a (2.5 μm) - Type of heating electr. Max. temperature 200 ‘C Pressure on workplate approx. 7 I kg-´cm2 piston diameter I 600mm -f 500mm Hydraulic pressure 16Mpa Machine structure Ko1umno,-a Motor power .of hydtaulic station ,- 5.5kW Heating power for J..ai:d working plate 9 x 0.9kW= 8.lkW Weight p,-assembly approx. 12000 g Press dimensions : Approximately 2800x I 200,´350Chnin Find more here - / Contact us at -

TOX pressotechnik CBM 004.025.001.a.007 Find more here - / Contact us at -

- Manufacturer: HAULICK+ROOS - Model : MD 260 SL - Length (mm): 0 – 260 - Material Width (mm): 10 – 260 - Material Thickness (mm): 3 - Band Speed (m/min): 60 - Band Cross-Section (mm): 800 - Year of Manufacture: 1983 The 1983 HAULICK+ROOS MD 260 SL is a mechanical double-column press manufactured by Haulick + Roos, a German company specializing in precision stamping and forming machines. This model is designed for high-speed production and is commonly used in industries requiring precise metal forming, such as automotive and electronics manufacturing. Key Specifications: - Press Force: 260 tons - Stroke Length: Variable, accommodating different production needs - Table Size: Approximately 1,250 mm x 1,000 mm - Slide Adjustment: Motorized, allowing for precise control over the slide position - Drive System: Eccentric or crank mechanism, typical for mechanical presses of this type  ...

Manufacturer: Passavant Model: Roepress 22.5 Condition: used Year of Manufacture: 2002 Type of Machine: Belt Press Find more here - / Contact us at -

Manufacturer: Joos Model: HP-S 360 Condition: used Machine Hours : 15.321 h Type of Machine: Press Find more here - / Contact us at -

Offer 25020 Specifications: - Compressive force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm - Diarrhea hole in the table approx. 320 x 220 mm - Pushrod area 940 x 400 mm - Plunger adjustability 100 mm - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm - Weight approx. 13000 kg

Filter press Manufacturer : Seitz Type: 20x20 Technical specifications : 3 casting plates

Gluing star with heating plates. Connection 30 KW. Four pressing surfaces. Hydraulic, pneumatic. Further dates will follow.

Qty. 1 Second-hand aluminium extrusion press line Mfc.: TCS, Asimakis, Sistem Teknic Force: 2200 MT Billet dia.: 8” Built: 1979 Still in operation! Type: Hydrauli horizontal Hydraulic pressure: 235 bar Scope of supply: Billet Loader Billet Furnace Hot Shear Billet Transfer Table Extrusion Press Run-Out Table Single Puller Cooling Table Stretcher Profile Stacker Ageing Furnace

Specifications Maximum pressure: 85 tons Year of Make: 1994 Pressing force: 103 tons/m² Number of ties: 4 - vertical Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1750 mm Bale weight: 500-650 kg Weight: 26 tons Power connection: 400 V/ 55 kW Bale tying: automatic

Key data: 130 t, 3100 mm

3000 x 130 ton - Extra Long Stroke 600mm! 8 Axis With tooling / DigiPro angle measurement

Erika Record Gr. 7 20 pcs dough dividing and knitting machine Year:2017 - Manufacturer: Erika Record Karl Schmidt GmbH - Semi-automatic roll press - To share and make an impact - Weight range: 70gram to 160gram - Type: 7 20 pcs - 20 pieces - 400 Volt 0.75kW 50Hz - Year of construction 2017

Manesty B3A tablet press. Condition - used machine. Technical parameters: 16 stations, pressure 6 tons. 1500 W motor. User manual available.

Specifications: Working length: 4100 mm Stand width: 3650 mm Press force: 220 to CNC control: OPERATOR OPII graphic Color Screen Size: 14" Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Mot. adjustable back gauge Projection: 420 mm Stroke: 180 mm Auto. Crowning Laser monitoring Motor power: 17 kW CE mark Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 16 tons Accessories: various tools

Specifications: Working length: 6200 mm Pressing force: 400 tons CNC control: CYBELEC ModEva 10S Number of controlled axes: 7 Controlled axes: Y1/Y2; X/1; R; Z1/Z2 Stroke: 315 mm Projection: 410 mm Crowning Motor power: 75 kW Tool clamping at the top and bottom Laser monitoring: FIESLER Dimensions (length x width x height): approx. 6300 x 2500 x 3850 mm Weight: approx. 40,5 tons Accessories: many tools Zustand / condition: very good condition

Specifications: Working length: 3100 mm Stand width: 2650 mm Pressing force: 100 tons CNC control : AMADA OPERATOR II 14-inch TFT color screen Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Mot. adjustable back gauge Projection: 415 mm Stroke: 200 mm Working height: 960 mm Crowning Engine power: 9 kW Dimensions (length x width x height): approx. 4300 x 2300 x 2950 mm Weight: approx. 8 tons Accessories: 1 set of segmented AMADA tools

Specifications: Working length: 3100 mm Stand width: 2650 mm Pressing force: 125 tons CNC control: AMADA OPERATOR II graphic 14-inch TFT color screen Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Automatic crowning Mot. adjustable back gauge Projection: 300 mm Stroke: 180 mm Working height: 960 mm Infrared photocell vertical and horizontal : SICK Motor power: 11.5 kW Dimensions (length x width x height)): approx. 3500 x 2200 x 2900 mm Weight approx. 9 tons Accessories: 1 set of AMADA tools 1 die : V50-35-22-16

Specifications: Working length: 4100 mm Stand width: 3650 mm Press force: 170 to CNC control: OPERATOR II grafic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Mot. adjustable back gauge Projection: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools

Specifications: Working length: 3100 mm Pressing force: 150 tons CNC control: ARA TS1 2D simulation touchscreen Controlled axes: Y1/Y2; X; R; Z1/Z2 Mot. adjustable back gauge Stroke: 300 mm servo-electric drive Tool holder : MODUFIX Motor power 22 kW Dimensions (length x width x height): approx. 4000 x 2300 x 2900 mm Weight: approx. 13 tons

Specifications: Working length: 1600 mm Pressing force: 32 tons CNC Control: TS1 2D Simulation Touch Screen Controlled axes: Y1/Y2; X Mot. adjustable back gauge Stroke: 215 mm servo-electric drive Crowning Tool clamping: WILA system Working height: 910 mm Motor power : 6 kW Dimensions (length x width x height): approx. 2000 x 1900 x 2100 mm Weight: approx. 3,3 tons Accessories: 1 set of new tools

Specifications: Working length: 3050 mm Distance between stands: 2690 mm Pressing force: 130 tons CNC Control: DELEM DA69 adjustable back gauge Controlled axes: Y1 / Y2; X; R; Z1 / Z2 CNC Table Bending Compensation MODUFIX clamping hydr. Tool clamping at the top and bottom Pneumatic tool displacement Angle measuring system Stroke: 365 mm Projection : 410 mm 2 pcs bending aids Motor power: 12.5 kW CE mark Dimensions (length x width x height): approx. 3800 x 2350 x 3150 mm Weight : approx. 13 tons Accessories: Tool Condition: good condition

Fully automatic baler Manufacturer: PAAL Type KONTI 275 D Year of Make: 2000 specifications: Press force: 75 t Drive power: 1 x 45 kW Total connected load: kW __ / 170 A Throughput under operating conditions: 280 m³/h Filling opening: 1,020 x 1,550 mm Bale size:750 x 1,100 mm Binding: 4-fold vertical incl. front printing plate slot cover Machine weight: approx. 25 t Bale weights: up to approx. 600 kg Including: - Free kicks - Large digit display

Good day We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: HSM Type VK 4812 Year of construction: 2011 Operating hours 20,580 hours Pressing force main press 48 t Drive power 30 kW Machine weight press 12 t The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH

Falch Pressure Washer R10/800, 1000 bar; only 2939 hours in use; complete with accessories as well as two rotary guns. Price basis for negotiation: 15.000,00€ net! If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

Manufacturer: HYDRAP Model: HPDZB 160 Year of Manufacture: 1986 Type of Machine: Hydraulic Press Nominal Force: 178 kN Stroke Length: 500 mm Voltage: 380 V Frequency : 50 Hz Nominal Power: 17.5 kW Current : Alternating Current (A) Weight: 7.5 tons Oil Viscosity : Unknown Maximum Load : 178 kN Safety Distance): Not provided Oil Quantity: 125 liters Weight : 23.000 kg Find more here - / Contact us at -

Plate length 4000 mm, plate width 2700 mm, 480 T printing, Plate opening 100 mm, one tier, heating plates with thermal oil, 15 KW

Inv. Num. : 8150 Type: PDqV 4-500 Producer: KRUPP Created: 1972, GO 2008 Parameters: Compressive force: 500 t Table length: 3000 mm Table width: 1800 mm Distance between frame walls: 3100 mm Maximum stroke rate upper table: 11 1/min Ram stroke: 850 mm Adjustment of the ram: 350 mm Main motor power: 75 kW Machine weight: 158000 kg According to the GO in 2008, the press was in operation for a maximum of 100 hours. In the years 1972–2008, the press was operated in two shifts.

Used tablet press Manesty, model B3A. 16 stations, capacity up to 700 tablets/min., pressure 6 tons, 1.5 kW motor.

Height 1750 mm Width 1260 mm Length 2380 mm Power supply: 400V 50Hz 3N Description The machine is adapted to transport shredded dry industrial materials.

Specifications: Working length: 2550 mm Stand width: 2125 mm Pressing force: 80 tons CNC control: AMADA OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Mot. adjustable back gauge Stroke: 200 mm Projection : 420 mm Crowning Working height: 960 mm Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 3000 x 2250 x 2250 mm Weight: approx. 6 tons Accessories: 1-set AMADA standard tool The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Height: 2100mm Diameter: 600mm

Used screw press made by Italian company Bertuzzi. New 2002. Press application: Citrus juice from the extractors can be pulped to meet customers' pulp content requirements. Helicoidal depulpers model ESM and Super have been designed specifically for refining citrus juice. They take the high-pulp juice from the extractors and gradually squeeze the pulp, producing a low-pulp juice.

Used Manesty tablet press model D4. Pressimng force -100 kN (10 tton). Capacity 60000 tablets per hour. Max filling depth -20,5 mm. Max tablet diameter – 25.4 mm.

Used Fette tablet press model Perfecta 3000. 45 station. Initial pressing force 230 Kn. Main pressing force 100 Kn. Max tablet diameter – 16 mm. Max tablet filling depth 18 mm. Capacity 486000 tablets/hour. EU-B 19 mm tooling with the machine. Machine manufactured in 1995, overhauled in 2004.