136,815 used machines on RESALE, but how to find them? Machine Search
table length: 780 mm table width: 500 mm ampere: - A Control: Heidenhain 121 total power requirement: - kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2 x 2 x 2 m No. 1564 Die-sinking EDM machine HANSEN 750 S max. workpiece weight 100 kg Working area: 500 x 300 x 375 Control: Heidenhain TNC-121 Eropuls NC-2000 Table 780 x 500 mm Space requirement approx. 2 x 1.5 m Weight approx. 3.7 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tie bar expansion nut for die casting machine IDRA1800, TR260x9, 446808, Idra, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Tie bar expansion nut, Tr260x9, D465x300mm high. Approx. 300kg for die casting machine IDRA OL1800/1750 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 6 months warranty We give you 6 months warranty for these goods from the date ...
Adjusting nut for die-casting machine OL2000, pull out, TR285x10, Oleopress, new -50% Special price As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely new and in its original packaging. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300
Adjusting nut for die-casting machine OL1500, pull out, TR250x12, Oleopress, new -50% Special price As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use and is completely as good as new. Achtung: Wir bieten verschiedene Säulen, Verstellmuttern, Holmdehnmuttern und 2 teilige Muttern von: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300
Adjustment nut for die casting machine IDRA OL1800, pullable, TR260x9, 170359, Idra, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. New! - Has never been used before and is completely new, - comes from a spare parts warehouse of a certified production company, - is in the original packaging, Adjuster nut, pullable, Tr260x9, D390/338x300mm high. Approx. 115kg for die casting machine IDRA OL1800/1750 The goods can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, tie bar expansion nuts and 2 piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D370, D330, D300 6 months warranty We give you a 6-month warranty for these goods f ...
Adjusting nut for die casting machine IDRA1800, TR260x9, 141384, Idra, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Adjusting nut, Tr260x9, D430x345mm high. Approx. 255kg for die casting machine IDRA OL1800/1750 With bronze contact rings on both sides, The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 6 months warranty We give you 6 months warranty for ...
Adjusting nut for die casting machine IDRA1800, TR260x9, 990542, Idra, used Top Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Adjusting nut, Tr260x9, D430x320mm high. Approx. 240kg for die casting machine IDRA OL1800/1750 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the ...
Adjusting nut for die casting machine IDRA1800, TR260x9, 151913, Idra, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Adjusting nut, Tr260x9, D430x320mm high. Approx. 240kg for die casting machine IDRA OL1800/1750 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In ...
AGIE CHARMILLES ROBOFORM 550 ist eine Senkerodiermaschine, ausgelegt für hohe Präzision, Genauigkeit und Zuverlässigkeit. Tisch 750×600 mm, max. Werkstückgewicht 1600 kg; Werkstück bis 1200×850×400 mm; Verfahrwege X 600 mm, Y 400 mm, Z 450 mm; Elektrodengewicht bis 100 kg. Anschluss 3×400 V 50 Hz; Maschinengewicht ~4500 kg; Abmessungen 3150×2750×2960 mm. Ermöglicht enge Toleranzen; Einsatzbereiche: Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt, Medizintechnik Technische Daten ohne Gewähr
MAKINO EDNC 30F ist eine Senkerodiermaschine, ausgelegt für Präzisionsbearbeitung, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazitäten: Tisch 500 x 350 mm mit 4 T-Nuten (10 mm, Abstand 80 mm), max. Tischbelastung 500 kg; Verfahrwege X 300 mm, Y 250 mm, Z 250 mm; größtes Elektrodengewicht 50 kg; Dielektrikum 60 l (650 x 450 x 300 mm). Technische Hauptdaten: Eilgang 20 m/min; Anschluss 50 Hz 3x 400 V; Maschinengewicht ca. 4100 kg; Abmessungen 2800 x 2200 x 2300 mm. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automobil, Luft-/Raumfahrt, Medizintechnik, Uhrenindustrie, Werkzeugbau. Technische Daten ohne Gewähr
SODICK AM3L ist eine Senkerodiermaschine, ausgelegt für hohe Präzision, große Genauigkeit und Zuverlässigkeit. 3 Achsen; Verfahrwege X 300 mm, Y 200 mm, Z 250 mm; Werkstücke bis L 600 × B 400 mm, Tischbelastung max 550 kg. Maschinengewicht ca. 2000 kg; Abmessungen L1260 × B1250 × H2315 mm. Werkzeugwechsler: 4 Werkzeuge. Eignet sich für enge Toleranzen; Branchen: Automobil, Uhrmacherei, Maschinenbau, Luftfahrt, Medizintechnik Technische Daten ohne Gewähr
Key data: 1288 KW, 1610 kVA, 480 V
Forty (40) New Diesel Generator set, 1610 kVA, 1288 kW, Standby, 1418 kVA, 1,134 kW Prime, 480v. 60 Hz. 1800 RPM, Diesel generator sets. Key Features: - Stamford alternator S6LD-G4/ LSA 50-2M6. - DSE7310 MKII Auto Start Controller. - ACB Fixed Type 3 Pole 2000 amp circuit breaker. - Tropical Radiator. - Anti Vibration Mountings - Non-Tier Diesel Generator sets - for sale outside the USA only! - Warranty
Key data: 1825 KW, 2281 kVA, 13 V
Five (5) Surplus Caterpillar 3516B, 1825 kW Prime, 13,800v. 60 Hz. 3 Phase, 0.8 P.F. Diesel Generator sets. These 2281 kVA Prime, Diesel generator sets for continuous parallel. They were manufactured in 2013 and were never used. They come with a electric starter 24v. prelube pump, Jacket Water Heater, Fuel filter, Air Filter, radiator cooled, Paralleling control system, 2760 frame generator, exhaust system with catalyst, open skids
Key data: 2145 KW, 2681 kVA, 400 V
Four (4) Quality Used Cummins qsk60-g8, C2500, 2145 KW, (Each) 400v, 50 Hz. Open Skids Diesel Generator Sets. · Hours Since New: less than 50 · Year of Manufacturing: 2021 · Generator End: Samford, model HVS1804S1 ·Radiator Cooled · Exhaust System · Fuel Filters · Air Filters · Oil Filters Units are ready for dismantling.
Caterpillar Model 3516B generator set, 2015 model year. Rated power: 2,281 kVA, 1,825 kW; rated voltage: 13,800 V; rated frequency: 60 Hz; rated RPM: 1,800. Never used; started only for testing purposes.
Key data: 1480 KW, 1850 kVA, 400 V
Mitsubishi S16R-PTA Diesel Generator – 1.5MW Mitsubishi S16R-PTA Diesel Generator built in 1995 . This unit is well-suited for industrial, marine and power generation applications. Offering reliable performance and efficiency with very low hours of operations since new. Specifications: Engine Type:4-stroke, water-cooled, V16 diesel engine Year of Manufacture: 1995 Rated Output: 1,480 kW Speed: 1,500 rpm Displacement: 65.37 liters Bore & Stroke: 170 mm × 180 mm Aspiration: Turbocharged & Aftercooled Fuel System: Direct injection Applications: Power generation, industrial, marine, and heavy-duty operations Key Benefits: Fuel Efficient: Advanced fuel injection system for optimized consumption. Reliable Performance: Designed to operate under demanding conditions. Consistent Power Output: Provides 1,480 kW a ...
Diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump -Manufacturer: Bosch, injection pump for 6-cylinder diesel engine -Type: PES6R120/720LV B 403 860 177 RQV300-900 RV -Individual components: see photos -Number: 1x injection pumps available -Price: per piece -Dimensions: 460/215/H325 mm -Weight: 32 kg
table length: 840 mm table width: 600 mm ampere: 60-120 A total power requirement: 15-23 kVA weight of the machine ca.: 2,75 t dimensions of the machine ca.: 2760 x 1110 x 1840 m With controlled C-axis and 16-position tool changer. WORKTABLE Table size: 840 x 600 mm Dielectric above table: 360 mm Maximum workpiece weight: 1000 kg T-slots: 4 x 10 mm Distance table to quill without chuck (max / min): 595 / 180 mm WORKHEAD X - Y travel: 565 x 400 mm Z travel: 415 mm X - Y - Z resolution: 0.001 mm C-axis resolution: 0.001 deg. Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg DIELECTRIC SUPPLY Tank volume: 400 liters Paper candle filters: 4 pieces GENERATOR Dimensions (height x width x depth): 1800 x 600 x 920 mm Weight: 300 kg Rated current: 60 – 120 A Power rating: 15 – 23 kVA Dimensions (height x width x depth): ...
table length: 780 mm table width: 500 mm ampere: 60 / 120 A Control: Heidenhain total power requirement: 14,0 KVA weight of the machine ca.: 4,0 t dimensions of the machine ca.: 3,0 x 2,0 x 2,1 m Sinker EDM machine Control: Heidenhain / Erocom Table: 780 x 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Various spare parts for engine 956 New . OEM. All in their original packaging. Stored in containers. Price against bid !
Manufacturer: Bobst Model: SP 130-ER II Type of Machine: Die Cutting Machine Year of Manufacture: 1997 Technical Specifications: - Sheet Size: 130 x 92 cm - Running Speed: Max. 7200 Sheets/Hour - Condition: Machine to be delivered in running condition - Productivity Sheets on the Machine: approximately 550 million sheets Main Components and Function: - Machine: Platform, removable platform on cylinder for feeder, recent asynchronous main motor, machine raised 650mm - Feeder: Manual non-stop feeder pallet, pile tray with manual lateral correction during production, suction unit with multiple adjustments, head feeder auto-adjustment with bottom pile - Feed Table: Double sheet detection, sheet down-holder guiding the sheets to the front guides, upper frame with manual lifting device, upper transport equipment for paper and cardboard - Platen Press: Complete shaping (cutting, pr ...
DIESEL TANK Capacity: 8,000 L (approx.) Material: Steel Condition: Not in used for 4 years PLEASE CONTACT MS. NURFAZIERA (+6011-2361 6977) Located at F21 backyard
Key data: 470 A, 550 , 60
Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition. ...
- Forming and pressing line for the production of 3-layer chipboards. - Maximum net dimensions of board 29355 x 2500 mm. - Net thickness of the boards from 4 mm to 40 mm. - Approximate board density 700 kg/m³ (for 16 mm thick board). - Production capacity: 29.40 m³/hour (for 29355 x 2500 x 16 mm boards). - Includes: • Queue preparation and management system. • 2 particle gluers for the different mixtures. • SCHENK forming system: year of manufacture 1988 (updated in 2001), with 3 forming stations (for the top, bottom and infill layers), length 28000 mm. • DIEEFFENBACHER continuous pre-press with cut-off station: year of manufacture 1989 (updated in 2001), maximum pre-pressing speed 350 mm/sec, length 28000 mm. • Acceleration conveyor belt: length 35000 mm. • DIEEFFENBACHER HPOG 80/26.200/35 continuous 2-plate hydraulic press: year of manufacture ...
EU STAGE 5 Compliant, 50/60 Hz switchable frequency via terminal link, 550 kVA Prime power, Spark arresting silencer, The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 6740; Engine: Perkins 2806J-E18TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including sockets CEE-Form:, 2x 16A (1ph+N+E), 2x 32A (3ph+N+E), 1x 63A (3ph+N+E), 1x 125A (3ph+N+E); Water Tank Volume [l]: 1125
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 5938; Engine: Perkins 4006-23TAG3A; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1494
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 769; Engine: Perkins 1103A-33TG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 145
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 818; Engine: Perkins 1103A-33G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 71
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 1341; Engine: Perkins 1106A-70TG1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 327
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Power [PS]: 179; Gross weight [kg]: 1434; Engine: Perkins 1106A-70TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 327
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 2100; Engine: Perkins 1106A-70TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 289
RATING TYPE STANDBY:, Output available with varying load for the duration of the interruption of the normal source power. Average, power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage, of 500 hours per year.; Gross weight [kg]: 11481; Engine: Caterpillar C32; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: battery charger and coolant heater; Water Tank Volume [l]: 1000
Letter Press Tiegel - DIE Cutter Heidelberg OHT Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1969 - Serial-No. 171075 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm
In einem sehr guten Zustand, Letter Press Cylinder DIE Cutter Heidelberg S in good working condition. Stanzzylinder / Automatic DIE-Cutter Cylinder Heidelberg S Serial-No. 13934 Size max. 540 x 720mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 5.000kg3 Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame
COMPAL POWER VG-R30 electric generator, super silenced, automatic electronic ignition, 4-cylinder water-cooled Ricardo engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 30 kW-41, 3kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 900 kg Auction-ID: A7-50066-145
Salini VGR-15 electric generator, super silenced, electric ignition, diesel engine with consumption reduction system, stabilized current protection, electronic voltage control. Outputs 220/380 Volt, power 15 kW. Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 1200 x 650 x 800 mm Weight: 250 kg Auction-ID: A7-50208-276
COMPAL POWER VG-R110 electric generator, super silenced, electric ignition, diesel engine with fuel consumption reduction system, stabilized current protection, electronic voltage control Outputs 220/380 Volt, power 10 kW-11 kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 1000 x 650 x 800 mm Weight: 200 kg Auction-ID: A7-50208-96
COMPAL POWER VG-R110 electric generator, super silenced, electric ignition, diesel engine with fuel consumption reduction system, stabilized current protection, electronic voltage control Outputs 220/380 Volt, power 10 kW-11 kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 1000 x 650 x 800 mm Weight: 200 kg Auction-ID: A7-50208-84
COMPAL POWER VG-R30 electric generator, super silenced, automatic electronic ignition, Ricardo 4-cylinder water-cooled engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 30 kW-41, 3kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 900 kg Auction-ID: A7-50208-117
COMPAL POWER VG-R50 electric generator, super silenced, automatic electronic ignition, 4-cylinder water-cooled Ricardo engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 50 kW-62, 5kVA Never used 0 hours, the power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 1100 kg Auction-ID: A7-50208-21
COMPAL POWER VG-R30 electric generator, super silenced, automatic electronic ignition, Ricardo 4-cylinder water-cooled engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 30 kW-41, 3kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 900 kg Auction-ID: A7-50066-320
Generator, power 100 kW, Ricardo brand 4-cylinder water-cooled engine, equipped with consumption reduction system, automatic electric ignition, digital control panel, electronic voltage control, outputs 230/380 volt Never used 0 hours, the power indicated refers to the peak power. Overall dimensions: 2450 x 1200 x 1500 mm Weight: 1300 kg Auction-ID: A7-50066-20
Salini VGR-15 electric generator, super silenced, electric ignition, diesel engine with consumption reduction system, stabilized current protection, electronic voltage control. Outputs 220/380 Volt, power 15 kW. Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 1200 x 650 x 800 mm Weight: 250 kg Auction-ID: A7-50066-311
COMPAL POWER VG-R30 electric generator, super silenced, automatic electronic ignition, Ricardo 4-cylinder water-cooled engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 30 kW-41, 3kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 900 kg Auction-ID: A7-50208-333
COMPAL POWER VG-R30 electric generator, super silenced, automatic electronic ignition, Ricardo 4-cylinder water-cooled engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 30 kW-41, 3kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 900 kg Auction-ID: A7-50208-233
Generator, power 100 kW, Ricardo brand 4-cylinder water-cooled engine, equipped with consumption reduction system, automatic electric ignition, digital control panel, electronic voltage control, outputs 230/380 volt Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2450 x 1200 x 1500 mm Weight: 1300 kg Auction-ID: A7-50208-108
Salini VGR-15 electric generator, super silenced, electric ignition, diesel engine with consumption reduction system, stabilized current protection, electronic voltage control. Outputs 220/380 Volt, power 15 kW. Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 1200 x 650 x 800 mm Weight: 250 kg Auction-ID: A7-50066-70
The 12V submersible pump can be used for fast refueling of diesel fuel, transfer of water and fluid oils from storage tanks to various vehicles without leakage. Auction-ID: A7-50066-412
COMPAL POWER VG-R30 electric generator, super silenced, automatic electronic ignition, Ricardo 4-cylinder water-cooled engine, engine with fuel consumption reduction system. Outputs 220/380 Volt, power 30 kW-41, 3kVA Never used 0 hours. The power indicated refers to the peak power. Overall dimensions: 2000 x 1000 x 1200 mm Weight: 900 kg Auction-ID: A7-50208-37
The 12V submersible pump can be used for fast refueling of diesel fuel, transfer of water and fluid oils from storage tanks to various vehicles without leakage. Auction-ID: A7-50066-459
maximum number of results exceeded
please refine your search
100.000 € 
