die spotting press used for sale

12-piece die block for die bending machine GEWAAbending tool for press brake, lower toolType: 0255/14Prism size: 16 mm for 90Prism angle: 88Countersunk depth: approx. 8 mmOverall height: 120 mmmax. Printing capacity per meter: 100 t/mFoot width from the die: 60 mmTotal length: 4175 mmSegment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mmWeight: 110 kgvery good condition; used

Key data: 1257 KW, 1580 kVA, 400 V

Caterpillar 3512-B STD Serial No.: 8EM00341 1257KW 1580 kva stamford 400volt 50hz & 60hz possible scope: genset on frame and alternator control panel small accessories

Key data: 8750 KW, 10938 kVA, 11000 V

10.5 MW MAN Germany 18V32/40 HFO power plant, year 2014, average running hour : 10,000 hrs. Good shaped, well maintenance power plant for sales

Key data: 568 KW, 680 kVA

We currently offer: Cummins generator set Type: VTA 28 G5 Generator Meccalte Power: 680 KVA / 568 KW Built in 1995 Hz 50 RPM 1500 Hours: 153 Metrics: L: 4.75m H: 2.45m W: 1.50m Weight: 6.5 tons You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 74831 Gundelsheim Phone: 0049 1796710242

Key data: 648 KW, 810 kVA

We currently offer: Perkins generator set Type: 3012-TAG2A Generator Stamford Type: HC. I634G1 Power: 810 KVA / 648 KW RPM 1500 Hz 50 IP 22 AVR Control MX321 Year of construction 2002 Operating hours 74 Control cabinet not included You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

We currently offer: New Perkins 4 Cylinder Engines Type: 404A-22G1 2.2 liters RPM 1500 Power: 20.3 KVA You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

We are selling our die-sinking EDM system here because of a new acquisition. This is a machine that was sold by the company MATRA at that time. This is a DECKEL DE35C. In the meantime, the company Exeron has taken over the service. The travel is: X=600mm Y=400mm Z=400mm The die-sinking EDM system has a 4-fold electrode changer The control system on the machine was recently overhauled, the power supply and the UPS were renewed. The machine was also otherwise continuously checked and maintained by the Exeron company in the event of malfunctions. Machine is running and is still on the power for a possible test. Operating hours are: 33196 hours. Various tool holders can be part of the price negotiation.

Key data: 1185 KW, 1000 1/min

DUE TO NEW MOTORIZATION THIS VERY NICE DEUTZ SBV6M 628 RIGHT-TURNING SHIP ENGINE REMOVED IN THE ROTATING STATE

CATERPILLAR C 175-16 year 2011 hours 100 power 3000 kva includ dry cooler and muffler loaded now in paris

Key data: 3300 KW

We have 28 unit diesel main engine MTU with their gear boxes. For more information, do not hestitate to contact with us. Engines 1981 model but some of them revised 2010 by MTU.

Load capacity: 1600kg, load center: 500mm, motor power: 26kW, travel speed: 20km/h, gradeability: 37%, turning radius: 2000mm, lift height: approx. 4500mm, overall height: approx. 2150mm, weight: approx. 2900kg. The machine requires a new battery. An on-site inspection is possible.

Leopard 1 engine MTU Mercedes Model: MB 838 Ca-500 Power: 830 hp 10-cylinder multi-fuel engine with approx. 38 litres displacement Speed: 2200 Weight dry: 1930 kg Bore stroke mm: 165/175 Displacement/cylinder: 3.74 l Cylinder displacement: 10 V / 37.4 l

A Ueda Shiko Kikai (Seiko) flatbed die-cutting machine from the 1980s is available. Throughput capacity: approx. 3600 sheets/h, max. sheet length: 1370mm, max. sheet width: 970mm, min. sheet format X/Y: 530mm/300mm, machine dimensions X/Y/Z: approx. 8150mm/2350mm/2050mm, weight: approx. 20000kg. An on-site inspection is possible.

very good condition,

Manufacturer: FRECH Model: DAW 125 S RC Year of Manufacture:1998 Type of Machine : zinc die-casting system Condition : The machine is fully functional and was used to manufacture bathroom accessories (shower handles). After just over a year of downtime, an oil change is required. Locking Force: 1250 kN Working Pressure: 105 bar Machine Weight: 6000 kg Rated Current: 40 A Rated Voltage: 3×400 V Control Voltage: 24 V Frequency: 50 Hz Find more here - .ucymachines/ Contact us at - sales@ucymachines

NEW, width 200 cm, 250 kg net weight, 0.70 m³ capacity, with Dieci Agri Farmer intake

Manufactuer: JCM Model: DBD4600 Year of Manufacture: 2011 Condition : Good Find more here - .ucymachines/ Contact us at - sales@ucymachines

Locking block for die casting machine GDK2500 by Frech, PADS1117.400, Parker, overhauled-as good as new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Refurbished! The locking block was overhauled by Parker, is in the original packaging and is in an immediately usable, top condition. The locking block can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Locking block, Parker, PADS1117.400, Suitable for the GDK 2500 machines from Frech/Müller Weingarten The block was still delivered to machines from Müller Weingarten and has SAE connections. Art. 937009 Weight 650kg Attention: We offer various columns, adjustment nuts, tie bar expansion nuts and 2 piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D ...

PG-D 80 TEA-S HC Generator for home feed-in 230V / 400V Time-limited output power 8.0 / 8.9 kVA Time-limited output power 6.4 / 7.5 kW Runtime at 50% load: 7.5h Protection class socket IP 44 Protection class generator IP 23 Fuel diesel, 15l tank Starter E-Start Dimensions: 950x550x690 mm Weight approx. 151kg G&STÜ-6731080

Cylinder part for Multi for GDK3500 die casting machine, 931732, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The cylinder part for Multi comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and fully functional. The cylinder part for Multi item 931732 from Frech/Müller Weingarten. Suitable for Frech/Müller Weingarten GDK 3500 machines with 185-tonnes or 220-tonnes units.. Weight 720 kg. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250,  ...

Key data: 800 KW, 938 kVA, 450 V

Make: Yanmar Model: 6N21L-EV Mfg. Date: 2006-09 Cont Rating: 800 KW Speed: 720 RPM Generator: Taiyo Mfg. Date: 2007-09 Model: GE45C-10 Output: 937.5 kVA Frequency: 60 Hz Volts: 450 V Qty: 3 #Yanmar #engine #generator #vessel #ship #marine #power #energy

Adjusting nut for die-casting machine IDRA2500, TR300x10, 111814, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr300x10, D450x375mm high. 260kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 2500 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Adjusting nut for die-casting machine IDRA2500, TR300x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr300x10, D450x345mm high. 240kg Adjusting nut for die casting machine IDRA 2500 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 3300. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460000210109, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 2500. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Adjusting nut for die-casting machine IDRA3300, TR330x10, 081300, Strate/Idra, used Top Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: Used-Top The nut is used and in top condition. Adjustable nut, Tr330x10, D500x375mm high. Approx. 340kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 3300 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Adjusting nut for die-casting machine IDRA3300, TR330x10, 121311, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr330x10, D500x375mm high. 340kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 3300 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine GDK2500, TR300x10, 946263, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D500/400/340mmx360mm high. Approx. 230kg The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D500x315mm high. Approx. 230kg Tie bar expansion nut for die casting machine IDRA 3300. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Folding nut for die casting machine, TR330x10, 931375, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Folding nut, Tr330x10, 2 pieces 550x220x220mm high. Approx. 270kg, 931375, The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Split nut for Idra die casting machine, TR330x10, 11505195.10, Druckguss Servive, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Split nut, Tr330x10, 2x590x275x285mm high. Approx. 540kg With sliding bushes The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Split nut for Idra 2500 die casting machine, TR300x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Split nut, Tr300x10, 2x550x250x285mm high. Approx. 540kg With sliding bushes The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460006160202, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D510/400/365x315mm high. Approx. 240kg Tie bar expansion nut for die casting machine IDRA 2500. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Engine Brand: MERCEDES, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 480 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 606 , Generator Hz: 60 , Generator Volts: 480 , Generator Amps: 2.2 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/mercedes-om473la-generator-606 kva/42288, , = More information =, , Empty weight: 5.500 kg, Type number: OM473LA GENERATOR 606KVA

Engine Brand: SCANIA, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 300 , Generator Hz: 60 , Generator Volts: 450 , Generator Amps: 385 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/scania-dsi14-02-generator-300k va-used/362, , = More information =, , Year of construction: 1010, Type number: DSI14.02 300KVA GENERATOR

Key data: 1472 KW, 1840 kVA, 450 V

Two (2) Surplus Caterpillar Marine Generator 3512B, 1472 kW Cont. 450v. 60 Hz. Two (2) Surplus/Never Used/Never Installed Caterpillar 3512B, 1472kW Continuous, 450v. 60 Hz. Marine Diesel Generators Two (2) Surplus, Never Used, Never Installed, Caterpillar 3512B, 1472 kW Continuous, 450v, 60 Hz. 0.8 P.F. 1800 RPM, Leroy Somer Generator, Control Panel, Diesel Generator set, Year 2016. APPLICATION: Marine Generator Set.

Engine Brand: SCANIA, Condition: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Green , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 350 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 300 , Generator Hz: 60 , Generator Volts: 450 , Generator Amps: 385 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/scania-dsi14-02-generator-300k va-used/33, , = More information =, , Year of construction: 1010, Empty weight: 2.250 kg, Type number: DSI14.02 300KVA GENERATOR

Engine Brand: SCANIA, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: White , Working Hours: 600 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 160 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 200 , Generator Hz: 50 , Generator Volts: 380 , Generator Amps: 303 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/scania-ds14a01-generator-200kv a-used/42311, , = More information =, , Empty weight: 3.000 kg, Type number: DS14A01 GENERATOR 200KVA

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Blue , Working Hours: 200 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 1520 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 1900 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 2742.4 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/stamford-a09i220986-generator- 1900-kva-used/818, , = More information =, , Empty weight: 12.500 kg, Type number: A09I220986 GENERATOR 1900 KVA

Engine Brand: OLYMPIAN, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 220 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 250 , Generator Hz: 50 , Generator Volts: 400/230 , Generator Amps: 361 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/olympian-geh250-generator-250k va-used/357, , = More information =, , Empty weight: 2.500 kg, Type number: GEH250 GENERATOR 250KVA

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Working Hours: 40413 Hour(s), Engine Condition: Core , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 280 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 350 , Generator Hz: 50 , Generator Volts: 415/240 , Generator Amps: 487 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/perkins-2306c-e14-tag2-generat or-350-kva-used/689, , = More information =, , Empty weight: 2.495 kg, Type number: 2306C-E14 TAG2 GENERATOR 350 KVA

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 10249 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 12 Volt , Rated Power: 160 Kw, Rated Speed: 1500 Rpm, Injection Type: Electronic Fuelpump (EDC) , Generator KVA: 200 , Generator Hz: 50 , Generator Volts: 400/230 , Generator Amps: 289 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/perkins-1500-pk51589-generator -200-kva-used/72, , = More information =, , Empty weight: 4.775 kg, Type number: 1500 PK51589 GENERATOR 200 KVA

Engine Brand: MTU, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Working Hours: 99999 Hour(s), Engine Condition: Core , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 1560 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 1875 , Generator Hz: 50 , Generator Volts: 6600 , Generator Amps: 164 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/aeg-dkb-h4506-04-generator-187 5-kva-used/52, , = More information =, , Empty weight: 9.800 kg, Type number: DKBH 4506/04 GENERATOR 1875 KVA

Engine Brand: MTU, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 1600 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 1875 , Generator Hz: 50 , Generator Volts: 660 , Generator Amps: 1640 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/mtu-16v396-generator-1875kva-u sed/224, , = More information =, , Type number: 16V396 GENERATOR 1875KVA

Engine Brand: MTU, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 735 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 739 , Generator Hz: 60 , Generator Volts: 380/220 , Generator Amps: 1234.5 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/mtu-12v2000g42-generator-739-k va-used/371, , = More information =, , Empty weight: 8.500 kg, Type number: 12V2000G42 GENERATOR 739 KVA

Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Working Hours: 120 Hour(s), Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 26 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 33 , Generator Hz: 50 , Generator Volts: 240 , Generator Amps: 277/480 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/used-kohler-30rozj-generator-3 3kva/186, , = More information =, , Empty weight: 1.200 kg, Type number: 30ROZJ GENERATOR 33KVA

Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Working Hours: 9405 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 160 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 200 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 288.7 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/john-deere-6068hfu82-generator -200kva-used/42307, , = More information =, , Empty weight: 1.970 kg, Type number: 6068HFU82 GENERATOR 200KVA

Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Working Hours: 8540 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 160 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 200 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 288.7 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/john-deere-6068hfu82-generator -200kva-used/42306, , = More information =, , Empty weight: 2.030 kg, Type number: 6068HFU82 GENERATOR 200KVA

Engine Brand: HONDA, Condition: NEW, Engine Cooling Type: Air Cooled , Engine Color: Red , Engine Condition: New , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Injection Type: Mechanical Fuelpump , Generator Hz: 50 , Generator Volts: 230 , Generator Amps: 12.2 , Generator Fases: 1 Fase + Nul (2 totaal) , , https://www.hamofa.com/stock/generators/honda-hp-4-3kw-generator-new/1 59, , = More information =, , Empty weight: 50 kg, Type number: HP 4.3KW GENERATOR