die magnetprofis used for sale

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 2301; Gross weight [kg]: 2301; Engine: NEF67TM3A; Accessories: Product features:, Switch board, Start battery; Water Tank Volume [l]: 600

trailer with 3 Cummins generators 300 kva 180 kva 60 kva

An Edelmann converted from a gravure printing machine into a rotary die-cutting machine is available. Principle: inline web processing with sheet stacking, materials: paper/cardboard/labels/die-cut parts, tool mounting: die-cutting plates, tool holder: magnetic cylinder, magnetic cylinder circumference: 24in, tool cassette: 12in, web width: 485mm, max. material width: 485mm, material weight range: 35-170g/m², max. roll diameter: 1200mm, max. production speed: 200m/min, production steps: roll-rotary die-cutting/cross-cutting/high-pile delivery. The machine ran little and is in as-new condition. Documentation available. An on-site inspection is possible.

Die-sinking EDM machine Manufacturer: Exeron Type: 312 Year of Make: 2004 Control MF10 Travel paths X/Y/Z: 450 x 300 x 300 mm Work table: 820 x 400 mm Working container: 900 x 520 mm Distance table / quill: 150 / 450 mm Max. electrode mass: 30 / 150 kg Max. workpiece weight: 800 kg Filling height work basin: 300 mm 20-fold tool changer Generator current: 60 A Power supply: 400 V Three-phase current: 50 Hz Power consumption: 8 kVA Overall dimensions W/D/ H approx.: 1,910 x 1,798 x 2,300 mm

Used SCANIA DC16 in parts Cylinder heads completely overhauled Missing: - Starter - Alternator - Crankshaft - Engine block - Camshafts

This 4-axis +GF+ AgieCharmilles FO 350SP die-sinking EDM machine was manufactured in 2013. It features a stable EDM generator, a fully operational 360° C-axis with a rotational speed of 100 rpm, and a substantial work area of 800 × 550 × 370 mm. Well-maintained and operational until its last day, consider the opportunity to buy this +GF+ AgieCharmilles FO 350SP die-sinking EDM machine. Contact us for more information about this machine.

Key data: 150 KW, 175 kVA, 400 V

MAN emergency power generator D 2156 MTL Diesel emergency generator from 1976, unknown operating hours, with control, day tank, storage tank and batteries. 1 available 140 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator Stamford C434B, 175 KVA Manufacturer: MAN Model: D 2156 MTL Type: Diesel Emergency Power Generator Serial number: 1768/51 Power [KW]: 150 Year of Make: 1976 Operating hours: unknown Weight unit [kg]: 4,000 Dimensions unit LxWxH [m]: 3.00 x 1.10 x 1.80 AC Generator Stamford C434B Manufacturer: Stamford Model No.: C434B Type: AC Synchronous Generator Serial number: 43450/1 Power [KVA]: 175 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 252 Speed [1/min]: 1,500 Year of Make: 1976

Key data: 394 KW, 493 kVA, 400 V

Polyma Diesel Emergency Power MA 1205005E65S Diesel generator from 1993, 1,336 operating hours, Container with control, 2 x 2,000 l tanks, chimney 1 available 394 KWel x 1,500 rpm, 400 V / 50 Hz. AC generator: MarelliMotori M7B3165KA52580, 525 KVA Manufacturer: Polyma Model No.: MA 1205005E65S Type: Diesel Emergency Power Generator Container Serial Number: 192023 Power [KVA / KW]: 493 / 394 Engine: MAN D2842LE (1992) Engine power: 424 Engine Serial Number: 49369180944201 Year of Make: 1993 Engine hours: 1,336 Total container weight [kg]: 11,000 Container dimensions [m]: 9.12 x 2.44 x 2.59 AC generator MarelliMotori M7B3165KA52580 Manufacturer: MarelliMotori Model No.: M7B3165KA52580 Type: AC Synchronous Generator Serial Number: MU5267 Power [KVA]: 525 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 759 Speed [1/min]: 1,500 Year of Make: 1993 Weight [kg ...

New stem radiator for large engines Dimensions : 180 x 900 x 2000 mm Weight : 500 Kg. With fan wheel

Please note that the specifications and the pictures might different from the actual stock from 2023 and newer. , See data sheets for the exact information., Kohler and SDMO are rebranded to REHLKO., Approved for HVO use; Gross weight [kg]: 390; Engine: Rehlko KDW1003; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 50

Please note that the specifications and the pictures might different from the actual stock from 2023 and newer. , See data sheets for the exact information., Kohler and SDMO are rebranded to REHLKO., Approved for HVO use; Gross weight [kg]: 785; Engine: Rehlko KDI2504TM-40; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 100

Please note that the specifications and the pictures might different from the actual stock from 2023 and newer., See data sheets for the exact information., Kohler and SDMO are rebranded to REHLKO., Approved for HVO use; Gross weight [kg]: 953; Engine: Rehlko KDI3404TM; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 100

Please note that the specifications and the pictures might different from the actual stock from 2023 and newer. , See data sheets for the exact information., Kohler and SDMO are rebranded to REHLKO., Approved for HVO use; Gross weight [kg]: 756; Engine: Rehlko KDI2504TM-30; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 100

Please note that the specifications and the pictures might different from the actual stock from 2023 and newer., See data sheets for the exact information., Kohler and SDMO are rebranded to REHLKO., Approved for HVO use; Gross weight [kg]: 640; Engine: Rehlko KDI1903M; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 66

Please note that the specifications and the pictures might different from the actual stock from 2023 and newer., See data sheets for the exact information., Kohler and SDMO are rebranded to REHLKO., Approved for HVO use; Gross weight [kg]: 510; Engine: Rehlko KDW1404; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 50

This genset is equipped with DSE 8610 MKII and motorized breaker applicable for net synchronization., , Surplus Unused 2023 Generator., Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch; Gross weight [kg]: 7250; Engine: Baudouin 6M33G660/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1100

Key data: 200 KW, 250 kVA, 400 V

Olympian Caterpillar Diesel generator in good condition. It has the following specifications: Power: 200kVA/ 200kW Year: 2009 Hours: 7000 approximately. Soundproof chamber with control panel. Video of operation available upon request

A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible.

diameter range 8-16 mm shaft length under head 25-160 mm max. thread length 80 mm output pieces/min 100

diameter range 6-12 mm shaft length under head 8-75 mm max. thread length 75 mm output pieces/min 1000

diameter range 6 mm shaft length under head 40 mm max. cut-off length 60 mm output pieces/min 600

diameter range 5 mm shaft length under head 70 mm max. cut-off length 88 mm output pieces/min 500

with washer assembly diameter range 6 mm shaft length under head 80 mm max. thread length 62 mm output - pieces/min 450

diameter range 4-12 mm shaft length under head 150 mm max. thread length 130 mm output pieces/min 85-220

vibratory feeder diameter range 3-8 mm shaft length under head 150 mm max. thread length 80 mm output pieces/min 400

diameter range 2,5-6 mm shaft length under head 80 mm max. thread length 40 mm output pieces/min 600

with washer assembly diameter range 10 mm shaft length under head 100 mm max. thread length 65 mm output pieces/min 180

vibratory feeder diameter range 10 mm shaft length under head 100 mm max. thread length 65 mm output pieces/min 180

vibratory feeder diameter range 3-8 mm shaft length under head 80 mm max. thread length 58 mm output - pieces/min 250-480

vibratory feeder diameter range 10 mm shaft length under head 180 mm max. thread length 80 mm output - pieces/min 400

vibratory feeder diameter range 6-12 mm shaft length under head 180 mm max. thread length 80 mm output - pieces/min 100-330

vibratory feeder diameter range 8-16 mm shaft length under head 150 mm max. thread length 83 mm output pieces/min 120

vibratory feeder diameter range 10-20 mm shaft length under head 16-180 mm max. thread length 105 mm output pieces/min 100

diameter range 1,6-4 mm shaft length under head 50 mm max. thread length 30 mm output pieces/min 300-750

vibratory feeder diameter range 2,5-6 mm shaft length under head 80 mm max. thread length 40 mm output pieces/min 600

vibratory feeder diameter range 4-12 mm shaft length under head 150 mm max. thread length 105 mm output pieces/min 80-260

tube feeder for studs and headless parts diameter range 6-12mm shaft length under head 95 mm max. thread length 90 mm output pieces/min 55

vibratory feeder diameter range 3-8 mm shaft length under head 80 mm max. thread length 55 mm output pieces/min 300

vibratory feeder diameter range 3-8 mm shaft length under head 80 mm max. thread length 55 mm output pieces/min 300

vibratory feeder diameter range 6-12 mm shaft length under head 170 mm max. thread length 102 mm output pieces/min 125

diameter range M8-M12 number of dies 4 number of stations (incl. cut off) 7 max. thread length 75 mm shaft length under head 20-125 mm cutting length 30-150 mm max. width acros flats 22 mm press power 1500 kN

bushing cut-off , PKO diameter range 10-22 mm number of dies 4 number of stations (incl. cut off) 7 cutting length 200 mm shaft length under head 160 mm output - pieces/min 60 max. thread length 95 mm max. width acros flats 32 mm

bushing cut-off , PKO , IFO diameter range 6-10 mm number of dies 4 number of stations (incl. cut off) 7 cutting length 75 mm shaft length under head 50 mm output - pieces/min 285 max. width acros flats 17 max. thread length 50 mm

Closed cutter , IFO , PKO , with thread roller and pointer diameter range 6-16 mm number of dies 4 number of stations 7 cutting length 340 mm shaft length under head 65-300 mm output - pieces/min 60-90 max. thread length 65-150 mm press power 150 to

bushing cut-off diameter range 16-27 mm number of dies 4 number of stations 7 cutting length 50-240 mm shaft length under head 30-180 mm range of thread length 95 mm max. width acros flats 24-41 mm output - pieces/min 84

bushing cut-off diameter range 6,5 mm number of dies 8 number of stations (incl. cut off) 9 cutting length 6-10 mm plane of stroke 123 mm output - pieces/min 150

bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer diameter range 14-22 mm number of dies 7 number of stations 8 cutting length 4-67 mm shaft length under head 4-75 mm output - pieces/min 175 press power 200(126) to max. outside dia. of round pie 42 mm

bushing cut-off diameter range 5 mm number of dies 6 number of stations (incl. cut off) 7 cutting length 35 mm shaft length under head 25 mm output - pieces/min 400 press power 15 to

bushing cut-off diameter range 23 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 190 mm shaft length under head 175 mm output - pieces/min 120 press power 220 to

diameter range 8 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 65 mm shaft length under head 54 mm output - pieces/min 350 press power 56 to