die head used for sale

turning diameter: 400 mm swing diameter: 650 mm max. turning height: 880 mm turning speeds: 2.500 U/min main spindle drive: 64 kW Control: Siemens - Sinumerik 840 travel -x axis: 500 mm travel -z axis: 500 mm Feed - X: 30 mm/min feedrate - Z: 30 mm/min driven tools turning speeds: 4.000 U/min diam. of main spindle in forward position: 160 mm numbers of positions in the tool changer: 8 tool holder -shaft diameter: 50 mm chucking diameter: 400 mm Vertical Turning Machine | DIEDESHEIM - VF 45-11 with driven tools and ITC The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VF45-11 | VF 45 | VF-45 | VF45 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Serial number 302698 / 01 , Including electric chain hoist, load capacity 125 kg maximum capacity: 125 kg, throat: 5,000 mm, Approx. Onsite Dimension. (l x w x h): 6,000 x 1,100 x 3,700 mm, weight approx.: 700 kg

General SKU394U1142 LocationBarneveld MakeDe Dietrich & Cie No.57503 Year of construction1988 Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume2500 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel Capacity2500 Ltr. Vessel sizesDia. 1300x2500mm Dished topcheck Dished bottomcheck ManholeDN500 Top connectionsDN100, DN80, DN50 (2x) Outletdia. 83 mm Max. temperature-25°C/+250°C MaterialGlass - Enamel (3008) Information Mounted on legscheck Floorspace1,30x1,30 m Total height3,70 m Weight1040 kgNew arrivalsPressure vesselsDe DietrichNew arrivalsTanks > Pressure vesselsBrand > De Dietrich What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ...

inlie GEA DIESSEL syrup house DICON Dimix linear mixer Capacity 32000 l/h Total dimensions length x width x height: 1800 mm x 1300 mm x 2300 mm No mixing tanks. The DICON™ linear system mixes liquid ingredients in the selected mixing ratio (in the pipe); and, because less equipment is required, space requirements are reduced, maintenance and cleaning (e.g. cleaning in place) Description: The economical mPDS 1000 analysis unit continuously determines the density and concentration of liquids and gases. Since the assessment body has written several application programs, the following process applications can be included in the standard: measurement of extract, alcohol and original wort in beer, measurement of alcohol in distilleries, Brix measurement, true and relative density and API number of petroleum products and measurement of gas density. Special requests can also be fulfi ...

pressure:1000 t distance between columns:3030 mm stroke:350 mm Distance table/ram, max. stroke up, adjustment up:1400 mm table surface area:3000 x 2000 mm table height over floor:430 mm side window:1450 x 1400 mm ram surface:3000 x 2000 mm speed down:300 mm/s speed up:340 mm/s working speed:18 - 44 mm/s return capacity:120 t oil volume:4400 l width with platform:4950 mm power capacity:2 x 90,0 + 10,0 kW weight:87,0 t Dimensions (WxDxH):4,35 x 3,65 x 7,55 m height over floor:6,05 m height beneath floor:1,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

pressure:500 t distance between columns:1910 mm stroke:500 mm Distance table/ram, max. stroke up, adjustment up:700 mm table surfache without cutting impact cushions:1910 x 1360 mm table surfache with cutting impact cushions:1600 x 1360 mm table height over floor:800 mm ram surface:1600 x 1270 mm Side window:600 mm speed down:400 mm/s speed up:330 mm/s working speed:10 - 28 mm/s oil volume:1200 l power requirement:60,0 kW weight:40,0 t Dimensions (WxDxH):3,6 x 2,5 x 5,0 m height over floor:4,5 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 cutting impact cushioning:hydraulic ram interlocking:hydraulic

Vertical milling head, milling head, angle milling head CCCP / USSR STANKO Type 1905 Product No: 393 Year of construction 1974 Tool holder: MK4 Hole spacing Machine flange plate: 245 x 185 mm Mounting hole: 17 mm Centering diameter on the machine flange plate: 190 mm - Drive via carrier, centric in centering diameter - Degree scaling on the flange plate 4x 90 rotatable - Degree scaling on the angle head +/-90 swivel Weight: 65 kg good condition Slot butt head bearing number 58166 and vertical milling head bearing number 58164 of identical STANKO milling machine.; used

Universal milling head, milling adapter, milling extension, angled milling head, universal milling angled head, milling angled head, milling head, top head -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Gear: 31 teeth -Dimensions: 505/180 / H195 mm -Weight: 30 kg

Sensor, write head, read head, read/write head -Manufacturer: Turck Blident, read/write head -Type: TNLR-Q80L400-H1147 -Voltage: 24 VDC -Dimensions: 415/80/H25 mm -Weight: 1.1 kg

Sensor, write head, read head, tactile bore measurement -from: warehouse liquidation -Product group: LF (70/455 kHz) -Dimension: 40 x 33 x 61.5 mm -Connection: M12x1 socket, 5.00 m, PU -Protection class: IP 67 -Weight: 450 g

Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill -Recording: Exit -Recording: Entrance -completely swiveling -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full

small die-head with 60, 80 or 100 mm die-insert, with cooling ring

SUTEAU ANVER XPM 18X13 300T receding head die cutting press was built in France in 2008. The machine aimed at mass production, is used in the process of precise cutting in foam and non-metallic materials, such as plastics, textiles and rubber. Built-in hydraulic systems combined with a stable design and reliable components ensure high precision and speed of cutting, regardless of machined material. The material taken from rolls or sheets is pressed against the machine head by the vertical movement of the working table, under which hydraulic cylinders are located. The cylinders exert a balanced pressure to achieve the ideal position of the table in relation to the head. The material is then machined using dies that can be mounted either to the head surface or on a lifted table. To facilitate the operator’s die positioning and the insertion and removal of the cut material, the SUTE ...

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Ridgid, die head -pipe size. to 3 -Number: 1x cutting head available -Price per piece -Dimensions: 350/270/H90 mm -Weight: 7.9 kg/pc.

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Ridgid, Model 815A die head -pipe size. 1/8 to 2 -Bolts: 1/4 to 2 -Number: 2x cutting head available -Price per piece -Dimensions: 260/240/H70 mm -Weight: 6 kg/pc.

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Asada, die head model T20123 -pipe size. 2 to 3 -Dimensions: 310/250/90 mm -Weight: 6.4 kg

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Asada, Die Head Model T20129 -pipe size. 1/2 to 2 -Dimensions: 310/220/90 mm -Weight: 5,5 kg

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Asada, Die Head Model T20129 -pipe size. 1/2 to 2 -Dimensions: 310/280/90 mm -Weight: 6 kg

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Ridgid, Model 811A Die Head 1/8 to 2 inch -pipe size. 1/8 to 2 -Bolts: 1/4 to 2 -Dimensions: 260/240/H70 mm -Weight: 5.6 kg

EDI Autoflex Extrusion Die width 900 mm.

Minimum Diameter: 110 mm // Maximum Diameter: 200 mm

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head, thread cutting chuck -Manufacturer: Efem, thread cutting head, thread cutter, four-jaw chuck type G5 -Cutting jaws: M24 g7 -Dimensions: 275/220/140mm -Weight: 12.2 kg

bushing cut-off diameter range 8,5 mm number of dies 2 number of stations (incl. cut off) 3 cutting length 100 mm shaft length under head 80 mm output - pieces/min 300 press power 30 t

bushing cut-off diameter range 14 mm number of dies 2 number of stations (incl. cut off) 4 cutting length 100 mm shaft length under head 90 mm output - pieces/min 100 press power 120 to

bushing cut-off diameter range 8-16 mm number of dies 2 number of stations (incl. cut off) 4 cutting length 160 mm shaft length under head 130 mm output - pieces/min 100

bushing cut-off diameter range 14-22 mm number of dies 7 number of stations 8 cutting length 4-67 mm shaft length under head 4-75 mm output - pieces/min 175 press power 200(126) to max. outside dia. of round pie 42 mm

bushing cut-off diameter range 6,5 mm number of dies 8 number of stations (incl. cut off) 9 cutting length 6-10 mm output - pieces/min 150

bushing cut-off diameter range 7-15 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 10-160 mm shaft length under head 15-130 mm output - pieces/min 130 press power 150 to

diameter range 12 mm number of dies 4 number of stations 5 cutting length 100 mm shaft length under head 80 mm output - pieces/min 125 press power 65 to

diameter range 10- 18 mm number of dies 4 number of stations 5 cutting length 155 mm shaft length under head 125 mm output - pieces/min 90 press power 200 to max diameter of the head 35 mm

bushing cut-off diameter range 16-30 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 235 mm shaft length under head 180 mm output - pieces/min 90 press power 380 to

bushing cut-off diameter range 2-6 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 95 mm shaft length under head 75 mm output - pieces/min 80-200

bushing cut-off diameter range 14 mm number of dies 4 number of stations (incl. cut off) 5 output - pieces/min 200 shaft length under head 90 mm cutting length 127 mm

bushing cut-off diameter range 10,5 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 85 mm shaft length under head 65 mm output - pieces/min 275 press power 65 to

bushing cut-off diameter range 10-26 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 220 mm shaft length under head 165 mm output - pieces/min 35-70 press power 380 to

diameter range 3-8,5mm number of dies 2 number of stations (incl. cut off) 4 output - pieces/min 250 shaft length under head 55 mm cutting length 60 mm

diameter range 10 mm number of dies 2 number of stations (incl. cut off) 4 output - pieces/min 60-100 stroke 100 mm

bushing cut-off diameter range 6 mm number of dies 2 number of stations (incl. cut off) 4 cutting length 65 mm shaft length under head 55 mm output - pieces/min 200 press power 250kN

bushing cut-off diameter range 6-14 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 300 mm shaft length under head 260 mm output - pieces/min 40-60

diameter range 3,8 - 6,5 number of dies 4 number of stations 5 cutting length 52 mm shaft length under head 6-35 mm output - pieces/min 250 press power 55 ton

with PKO diameter range 8 mm number of dies 3 number of stations (incl. cut off) 4 cutting length 70 mm shaft length under head 60 mm output - pieces/min 300

bushing cut-off diameter range 8,5 mm number of dies 2 number of stations 4 cutting length 55 mm shaft length under head 55 mm output - pieces/min 200 press power 30 to

bushing cut-off diameter range 22 mm number of dies 4 number of stations (incl. cut off) 5 output - pieces/min 105 shaft length under head 155 mm cutting length 175 mm press power 250 to

bushing cut-off diameter range 23 mm number of dies 4 number of stations (incl. cut off) 4 cutting length 270 mm output - pieces/min 100 press power 265 to

bushing cut-off diameter range 3-8,5 mm number of dies 2 number of stations 4 cutting length 55 mm shaft length under head 55 mm output - pieces/min 200 press power 30 to

4x RING EYE COMPONENTS AND 2x STAPLING HEAD COMPONENTS FOR STITCHING HEADS HOHNER 48/5 S