136,895 used machines on RESALE, but how to find them? Machine Search
Leopard 1 engine MTU Mercedes Model: MB 838 Ca-500 Power: 830 hp 10-cylinder multi-fuel engine with approx. 38 litres displacement Speed: 2200 Weight dry: 1930 kg Bore stroke mm: 165/175 Displacement/cylinder: 3.74 l Cylinder displacement: 10 V / 37.4 l
A Ueda Shiko Kikai (Seiko) flatbed die-cutting machine from the 1980s is available. Throughput capacity: approx. 3600 sheets/h, max. sheet length: 1370mm, max. sheet width: 970mm, min. sheet format X/Y: 530mm/300mm, machine dimensions X/Y/Z: approx. 8150mm/2350mm/2050mm, weight: approx. 20000kg. An on-site inspection is possible.
Manufacturer: FRECH Model: DAW 125 S RC Year of Manufacture:1998 Type of Machine : zinc die-casting system Condition : The machine is fully functional and was used to manufacture bathroom accessories (shower handles). After just over a year of downtime, an oil change is required. Locking Force: 1250 kN Working Pressure: 105 bar Machine Weight: 6000 kg Rated Current: 40 A Rated Voltage: 3×400 V Control Voltage: 24 V Frequency: 50 Hz Find more here - .ucymachines/ Contact us at - sales@ucymachines
NEW, width 200 cm, 250 kg net weight, 0.70 m³ capacity, with Dieci Agri Farmer intake
This 3-axis Sodick AG40L LN2 was manufactured in 2015. It features an X-axis travel of 400 mm, Y-axis travel of 300 mm, and Z-axis travel of 270 mm. The machine has been operated for 13,161 hours and is currently connected and available for inspection/testing. If you are looking to get high-quality die-sinking capabilities, consider the Sodick AG40L LN2 machine we have for sale. Contact us for further details.
; Gross weight [kg]: 5230; Engine: Perkins 2506A-E15TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775
; Gross weight [kg]: 350; Engine: Kubota D722; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: battery charger, 3-way valve, Output sockets: 63A - 16A; Water Tank Volume [l]: 58
Manufactuer: JCM Model: DBD4600 Year of Manufacture: 2011 Condition : Good Find more here - .ucymachines/ Contact us at - sales@ucymachines
; Gross weight [kg]: 345; Engine: Kubota D722; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: battery charger and earth pin, Sockets: (3P) 16A - (2P) 16A - Schuko, 230V/400V; Water Tank Volume [l]: 25
; Gross weight [kg]: 3090; Engine: Baudouin 6M16G275/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 285
PG-D 80 TEA-S HC Generator for home feed-in 230V / 400V Time-limited output power 8.0 / 8.9 kVA Time-limited output power 6.4 / 7.5 kW Runtime at 50% load: 7.5h Protection class socket IP 44 Protection class generator IP 23 Fuel diesel, 15l tank Starter E-Start Dimensions: 950x550x690 mm Weight approx. 151kg G&STÜ-6731080
Locking block for die casting machine GDK2500 by Frech, PADS1117.400, Parker, overhauled-as good as new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Refurbished! The locking block was overhauled by Parker, is in the original packaging and is in an immediately usable, top condition. The locking block can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Locking block, Parker, PADS1117.400, Suitable for the GDK 2500 machines from Frech/Müller Weingarten The block was still delivered to machines from Müller Weingarten and has SAE connections. Art. 937009 Weight 650kg Attention: We offer various columns, adjustment nuts, tie bar expansion nuts and 2 piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D ...
Cylinder part for Multi for GDK3500 die casting machine, 931732, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The cylinder part for Multi comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and fully functional. The cylinder part for Multi item 931732 from Frech/Müller Weingarten. Suitable for Frech/Müller Weingarten GDK 3500 machines with 185-tonnes or 220-tonnes units.. Weight 720 kg. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, ...
Diesel fuel station, diesel tank, gas station, fuel tank system, fuel tank, gasoline tank -Diesel tank: Fuel tank, universally applicable -Overall dimensions: 530/335/H370 mm -Empty weight: 2.9 kg
used
Capacity 50 tons Stroke 750 mm Table size 1500x1000 mm
Caprari MEC-MR80/2A mobile irrigation pump – Deutz F4L912 diesel – 34 kW – 4\" Specifications: Pump brand: Caprari Pump type: MEC-MR80/2A Pump design: horizontal 2-stage centrifugal pump Application: irrigation / displacement Suction connection: 4\" / DN100 Pump pressure connection: DN80 / 3\", with piping/reducers Maximum pump speed: approx. 2,900 rpm Weight of separate pump: approx. 127 kg Indicative capacity at approx. 1,750 rpm: up to approx. 144 m³/h Indicative operating pressure at approx. 1,750 rpm: approx. 5.9–8.6 bar, depending on flow rate Engine brand: Deutz Engine type: F4L912 Engine number: 7386304 Fuel: diesel Engine design: 4-cylinder in-line engine Cooling: air-cooled Displacement: approx. 3,770 cc Power according to type plate: 34 kW / approx. 46 hp Rated speed: 1,800 rpm Fuel injection: mechanical Start: electric Tires: 235/75 R15 M+S ...
Key data: 800 KW, 938 kVA, 450 V
Make: Yanmar Model: 6N21L-EV Mfg. Date: 2006-09 Cont Rating: 800 KW Speed: 720 RPM Generator: Taiyo Mfg. Date: 2007-09 Model: GE45C-10 Output: 937.5 kVA Frequency: 60 Hz Volts: 450 V Qty: 3 #Yanmar #engine #generator #vessel #ship #marine #power #energy
; Gross weight [kg]: 4600; Engine: Hyundai DP158LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775
; Gross weight [kg]: 1120; Engine: Kubota V2203; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Sockets 400V: 1x63A, 1x32A, 2x 16A, Sockets 230V: 3x 16A CEE, 1x 16A Schuko; Water Tank Volume [l]: 150
This 4-axis INGERSOLL Gantry 400 was manufactured in 2005. It features a main voltage of 400 V and operates at a frequency of 50 Hz. The machine is equipped with a Multipulse64 control system, ensuring precision in die-sinking applications. If you are looking to get high-quality die-sinking capabilities, consider the INGERSOLL Gantry 400 machine we have for sale. Contact us for further details.
Adjusting nut for die-casting machine IDRA2500, TR300x10, 111814, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr300x10, D450x375mm high. 260kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 2500 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Warranty:, 1 year for continuous use, 2 years for standby use, Surplus unused 2022 generator.; Gross weight [kg]: 1057; Engine: Cummins X3.3-G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 71
Adjusting nut for die-casting machine IDRA2500, TR300x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr300x10, D450x345mm high. 240kg Adjusting nut for die casting machine IDRA 2500 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 3300. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460000210109, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 2500. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Adjusting nut for die-casting machine IDRA3300, TR330x10, 081300, Strate/Idra, used Top Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: Used-Top The nut is used and in top condition. Adjustable nut, Tr330x10, D500x375mm high. Approx. 340kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 3300 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Adjusting nut for die-casting machine IDRA3300, TR330x10, 121311, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr330x10, D500x375mm high. 340kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 3300 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Tie bar expansion nut for die casting machine GDK2500, TR300x10, 946263, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D500/400/340mmx360mm high. Approx. 230kg The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D500x315mm high. Approx. 230kg Tie bar expansion nut for die casting machine IDRA 3300. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Easily bring large quantities of fuel to the site? Then this large tank is the ideal solution with a 12v Diesel pump Auction-ID: A3-46126-5779
Folding nut for die casting machine, TR330x10, 931375, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Folding nut, Tr330x10, 2 pieces 550x220x220mm high. Approx. 270kg, 931375, The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Split nut for Idra die casting machine, TR330x10, 11505195.10, Druckguss Servive, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Split nut, Tr330x10, 2x590x275x285mm high. Approx. 540kg With sliding bushes The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Split nut for Idra 2500 die casting machine, TR300x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Split nut, Tr300x10, 2x550x250x285mm high. Approx. 540kg With sliding bushes The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460006160202, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D510/400/365x315mm high. Approx. 240kg Tie bar expansion nut for die casting machine IDRA 2500. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Engine Brand: MERCEDES, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 480 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 606 , Generator Hz: 60 , Generator Volts: 480 , Generator Amps: 2.2 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/mercedes-om473la-generator-606 kva/42288, , = More information =, , Empty weight: 5.500 kg, Type number: OM473LA GENERATOR 606KVA
Key data: 1472 KW, 1840 kVA, 450 V
Two (2) Surplus Caterpillar Marine Generator 3512B, 1472 kW Cont. 450v. 60 Hz. Two (2) Surplus/Never Used/Never Installed Caterpillar 3512B, 1472kW Continuous, 450v. 60 Hz. Marine Diesel Generators Two (2) Surplus, Never Used, Never Installed, Caterpillar 3512B, 1472 kW Continuous, 450v, 60 Hz. 0.8 P.F. 1800 RPM, Leroy Somer Generator, Control Panel, Diesel Generator set, Year 2016. APPLICATION: Marine Generator Set.
Engine Brand: SCANIA, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 300 , Generator Hz: 60 , Generator Volts: 450 , Generator Amps: 385 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/scania-dsi14-02-generator-300k va-used/362, , = More information =, , Year of construction: 1010, Type number: DSI14.02 300KVA GENERATOR
Engine Brand: SCANIA, Conditie: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Green , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 350 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 300 , Generator Hz: 60 , Generator Volts: 450 , Generator Amps: 385 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/153187, , = More information =, , Year of construction: 1010, Empty weight: 2.250 kg, Type number: DSI14.02 300 KVA GENERATOR 300 K
Engine Brand: SCANIA, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: White , Working Hours: 600 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 160 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 200 , Generator Hz: 50 , Generator Volts: 380 , Generator Amps: 303 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/scania-ds14a01-generator-200kv a-used/42311, , = More information =, , Empty weight: 3.000 kg, Type number: DS14A01 GENERATOR 200KVA
Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Blue , Working Hours: 200 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 1520 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 1900 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 2742.4 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/stamford-a09i220986-generator- 1900-kva-used/818, , = More information =, , Empty weight: 12.500 kg, Type number: A09I220986 GENERATOR 1900 KVA
Engine Brand: OLYMPIAN, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 220 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 250 , Generator Hz: 50 , Generator Volts: 400/230 , Generator Amps: 361 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/olympian-geh250-generator-250k va-used/357, , = More information =, , Empty weight: 2.500 kg, Type number: GEH250 GENERATOR 250KVA
maximum number of results exceeded
please refine your search
50 € 
