126,698 used machines on RESALE, but how to find them? Machine Search
Air steam die forging hammer : Capacity : 16 tons, Nominal mass of drop parts : 16000 kg, Impact energy : 400 KJ, Ram stroke : 1500 mm, Ram stroke per minute : 20, Distance clear between guides : 1180 mm, Ram dimensions front to back : 1500 mm, Die holder dimensions front to back : 1600 mm, Bottom die impression to floor distance : 500 mm, Steam/air pressure : 0.7-0.9 MPa, Overal dimensions : - Floor space : 4500 x 2450 mm, - Height above floor level : 7920 mm, Mass of anvil block : 325 tons, Total weight of hammer : 425 tons.
Daedong D 3-110, 3-Cyl., 1127 cm³ displacement, 18 kw/24 HP/ 3000 1/min. Incl. starter, alternator, generator flange SAE 5. as well as Daedong D 4-150, 4-cyl., 1502 cm³ displacement, 24 kw/32 hp/ 3000 1/min. Incl. starter, alternator, generator flange SAE 5.
Due to new motorization in the rotating state Removed The engine was installed by us at that time and from 0 to 53,000 turning hours with us very well fought
Travel distances: 350 x 250 x 315 mm [ X x Y x Z ] Table size X: 576 mm Table size Y: 400 mm workpiece weight: 500 kg C-axis Pinole recording: EROWA
; Gross weight [kg]: 6934; Engine: Caterpillar C18; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1307
; Power [PS]: 598; Gross weight [kg]: 4860; Engine: Volvo TAD1346GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : Coolant heater and battery charger; Water Tank Volume [l]: 900
Key data: 36 KW, 45 kVA, 400 V
ON HAND NEW STAGE V 30 months warranty Stamford Alternator ComAp Control Generator Set Specifications: Model: EQ-YSV4536 Primary power: 45 kVA / 36 kW Standby power: 49 kVA / 39 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine Make: Yanmar Engine Model: 4TNV98CT-IYE Displacement (L): 3.32 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Emissions: Euro Stage V Dimensions of the generator set: Length: 2220 mm Width: 960 mm Height: 1263 mm Weight open: 960 kg Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Preheater (or preheater) Lubricating oil and antifreeze Batteries and ...
Key data: 48 KW, 60 kVA, 400 V
ON HAND STAGE V 30 months warranty Stamford Alternator ComAp Control Generator Set Specifications: Model: EQ-DSV4536 Primary power: 60 kVA / 48 kW Standby power: 60 kVA / 48 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine Make: Doosan Engine Model: D34 Displacement (L): 3.41 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Emissions: Euro Stage V Dimensions of the generator set: Length: 2430 mm Width: 1056 mm Height: 1600 mm Weight Open: - kg Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Preheater (or preheater) Lubricating oil and antifreeze Batteries and cables Elect ...
Travel: 825 x 680 x 405 mm [ X x Y x Z ] Table size X: 1200 mm Table size Y: 850 mm workpiece weight: 3000 kg Electrode changer: 50 - fold Generator POCON 60 Pinole recording: EROWA Heavy Duty Adapter O-Module Halogen lamp
Technical details Pressure 110 t Technology Passage width 1200 x 1000 mm Stroke 1200 mm Machine weight approx. 12 t Space requirement approx. 4500 x 4300 x 2700 mm Master cylinder 1 piece Installation height (distance table to plunger plate) 1200 mm Table height 700 mm Table can be extended by 1200 mm Table tiltable by 45 degrees Upper tool folds down by 180 degrees Table rotatable by 180 degrees Table load max. 10 t Travel speed of the table 25 mm/sec Flow speed 195 mm/sec Return speed 130 mm/sec Working speed adjustable from 0 to 10 mm/sec. Table area between the columns 1250 x 1000 mm Engines WEG Accessories Paint structure RAL 7035 (light grey) Additional information Painting cladding, doors, maintenance balcony RAL 1021 (Yellow) Painting accessories RAL 7021 (dark grey) Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C4 ...
Key data: 200 KW, 250 kVA, 400 V
Generator Set Specifications: Model: EQ-I250200 Primary power: 250 kVA / 200 kW Standby power: 275 kVA / 220 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine brand: Iveco Engine Model: NEF67TE8P Bore x Stroke (mm): 104 x 132 Displacement (L): 6.7 Compression ratio: 17:1 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Dimensions of the generator set (closed): Length: 3770 mm Width: 1350 mm Height: 2370 mm Weight Open: 2790 kg (Note: Here it says "Weight Open" despite the heading "Dimensions of the generator set (Closed)". I left it as it is in the original.) Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil l ...
Engine QSF3.8 97kW Condition - new Manufacutred by Cummins Inc. Engine serail No 76501916 Family KCEx103.8AAB Gross Rated kW - 97kW at 2500 rpm Idle RPM 950 Gross weight - 440 kg In stock 4 pcs Hakusanat: CM2350 Continental P5317106 1T2350A07192732 T1669 FS109S CB80031.12 BFCEC P5476423 S03068876501946
Key data: 160 KW, 200 kVA, 400 V
Generator Set Specifications: Model: EQ-I200160 Primary power: 200 kVA / 160 kW Standby power: 220 kVA / 176 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine brand: Iveco Engine Model: NEF67TM7 Bore x Stroke (mm): 104 x 132 Displacement (L): 6.7 Compression ratio: 17.5:1 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Dimensions of the generator set (closed): Length: 3150 mm Width: 1056 mm Height: 1900 mm Weight Open: 2000 kg (Note: Here it says "Weight Open" despite the heading "Dimensions of the generator set (Closed)". I left it as it is in the original.) Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil ...
Key data: 400 KW, 500 kVA, 400 V
Generator Set Specifications: Model: EQ-I400320 Primary power: 500 kVA / 400 kW Standby power: 520 kVA / 416 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine brand: Iveco Engine Model: CURSOR13TE7W Bore x Stroke (mm): 135 x 150 Displacement (L): 12.9 Compression ratio: 16.5:1 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Dimensions of the generator set (closed): Length: 4810 mm Width: 1600 mm Height: 2560 mm Weight Open: 4890 kg (Note: Here it says "Weight Open" despite the heading "Dimensions of the generator set (Closed)". I left it as it is in the original.) Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible ...
motor pump Scania Ds11 6-cylinder in-line engine
Key data: 48 KW, 60 kVA, 400 V
Made in EU Warranty for 30 months Completely new Generator Set Specifications: Model No.: EQ-I4536 Primary power: 60 kVA / 48 kW Standby Power: 66kVA / 52.8kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine brand: Iveco Engine Model: NEF45SM1A Bore x Stroke (mm): 104 x 132 Displacement (L): 4.5 Compression ratio: 17.5:1 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Dimensions of the generator set (closed): Length: 2220 mm Width: 960 mm Height: 1258 mm Weight Open: 1101 kg (Note: Here it says "Weight Open" despite the heading "Dimensions of the generator set (Closed)". I left it as it is in the original.) Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breake ...
Key data: 24 KW, 30 kVA, 400 V
Produced in the EU Power Generator Specifications: Model No.: EQ-I3024 Prime Rating: 30 kVA / 24 kW Standby Rating: 33 kVA / 26.4 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: S8000 AM1 Bore x Stroke (mm): 99 x 104 Displacement (L): 3.2 Compression ratio: 17:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2220 mm Width: 960 mm Height: 1258 mm Weight open: 945 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically paint-coated, welded steel chassis Fuel tank integrated into the cha ...
Diesel tank - 1000 liters - Double-walled - As good as new condition - Completely cleaned - Stackable - - - - - Dispatch: - A Germany-wide transport is possible for an extra charge - To be able to give an exact freight price please send me a request with your zip code - - - - - Price: - 1.000,- € + 19 % VAT = 1.190 € - An invoice with VAT will be issued - Payment: Prepayment - - - - - Other: - Sale of used machines in the actual state to traders without warranty
Key data: 24 KW, 30 kVA, 230 V
This generator is manufactured in the EU according to all European standards 30 months warranty Stamford Alternator ComAp Control Module Power Generator Specifications: Model No.: EQ-I3024 Prime Rating: 30 kVA / 24 kW Standby Rating: 33 kVA / 26.4 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: S8000 AM1 Bore x Stroke (mm): 99 x 104 Displacement (L): 3.2 Compression ratio: 17:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2220 mm Width: 960 mm Height: 1258 mm Weight open: 945 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and ...
Key data: 16 KW, 20 kVA, 230 V
Made in the EU 30 months warranty Stamford Alternator ComAp Control Module Power Generator Specifications: Model No.: EQ-P2016 Prime Rating: 20 kVA / 16 kW Standby Rating: 22 kVA / 17.6 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine Make: Perkins Motor Model: 404A-22G1 Bore x Stroke (mm): 88 x 110 Displacement (L): 2,216 Compression Ratio: 23.3:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions of the unit: Length: 1600 mm Width: 650 mm Height: 1250 mm Weight open: 560 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically paint-co ...
Dear's Sale, used 2 diesel engine Ulstein Bergen BVM-12 Brgds Hakan KUSCU +905323642509
Dear's Sale, used 4 diesel engine WARTSILA 12 ZAV 40 S Brgds Hakan KUSCU +905323642509
Dear's Sale, used 2 complete engine WARTSILA 6R32D Brgds Hakan KUSCU +905323642509
Key data: 80 KW, 100 kVA, 230 V
Made in the EU 30 months warranty On hand! Only 2 pieces available Power Generator Specifications: Model No.: EQ-I10080 Prime Rating: 100 kVA / 80 kW Standby Rating: 109 kVA / 87 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: NEF45TM2A Bore x Stroke (mm): 104 x 132 Displacement (L): 4.5 Compression Ratio: 17.5:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2430 mm Width: 1056 mm Height: 1700 mm Weight: 1422 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically paint-coated, weld ...
Printing plate die-cutter for Roland 300 presses with CPL system. Tested, all punching modules without defect. Stock goods, can be shipped immediately.
a used DETROIT diesel mototor komplet model DD 50 s/n 4 R005301. Price 4.000,= ex Leende
Diesel engine brand Caterpillar Type 3306T, Location: Brown Lenox K114 crusher, year of construction 1992, Accessories: Starter, Generator, Turbo, Engine is serviced and ready for use
Hello all We have 8 X Wartsila 12V32 LN engines available Year of build is 2007 In very good condition Also all major parts are available such as: Pistons, Liners, Cylinder heads, Con rods, Crank shaft Please contact us at : info@fin-marine for more info
Key data: 60 KW, 75 kVA, 400 V
ON HAND 30 months warranty WEG Alternator DEIF Module Generator Set Specifications: Model No.: EQ-H7560 Emergency power output: 75 kVA / 60 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine manufacturer: Hyundai Engine Model: SP344CC Charging: Turbocharging & Intercooler Fuel System: Series Injection Regulator Type: Mechanical Generator set dimensions (closed): Length: 2430 mm Width: 1056 mm Height: 1700 mm Weight open: 1140 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine WEG Generator ABB Circuit Breakers Protection system in manual operation Flexible oil hoses and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically painted, welded steel chassis Fuel tank integrated into the chassis Industrial Silencer Electronic Battery Charger Elect ...
; Power [PS]: 65; Engine: Iveco FPT F34TE1PV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets:, CEE 32A 400V 5P, CEE 16A 230V 3P; Water Tank Volume [l]: 140
; Power [PS]: 538; Engine: Scania DC13 320A 02-63; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 370
; Power [PS]: 359; Gross weight [kg]: 4600; Engine: Volvo TAD1380GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320
; Power [PS]: 419; Engine: Volvo TAD1381GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320
; Power [PS]: 479; Gross weight [kg]: 3900; Engine: Volvo TAD1382GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320
; Power [PS]: 239; Engine: Volvo TAD881GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 280
; Power [PS]: 299; Gross weight [kg]: 4450; Engine: Volvo TAD882GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 280
; Power [PS]: 789; Gross weight [kg]: 7500; Engine: Volvo TWD1683GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 600
; Power [PS]: 36; Gross weight [kg]: 835; Engine: Yanmar 4TNV98C-33G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets:, CEE 63A 400V 5P, CEE 32A 400V 5P, CEE 16A 230V 3P, , Prices when changing alternator options may differ from the price online.; Water Tank Volume [l]: 100
; Power [PS]: 48; Gross weight [kg]: 1000; Engine: Yanmar 4TNV98CT-44G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets:, CEE 63A 400V 5P, CEE 32A 400V 5P, CEE 16A 230V 3P, , Prices when changing alternator options may differ from the price online.; Water Tank Volume [l]: 120
; Gross weight [kg]: 4950; Engine: Volvo TAD1642GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 900
; Gross weight [kg]: 2350; Engine: Iveco NEF67TM4.S500; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224
; Gross weight [kg]: 5230; Engine: Perkins 2506A-E15TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775
; Gross weight [kg]: 5071; Engine: Caterpillar C15; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 842
; Gross weight [kg]: 5395; Engine: Perkins 2506C-E1STAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775
; Gross weight [kg]: 1989; Engine: Perkins 1106A-70TAG4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224
; Gross weight [kg]: 1658; Engine: Cummins 6BTAA5.9-G12; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185
Manufactured Year: 2014 Engine Manufacturer: Hyundai Himsen Model Number: 9H 25/33 Alternator Manufacturer: Hyundai ESS Model Number: HRS7 637-8P Condition: New, Not Operated Fuel Type: Diesel/HFO/MDO Power Output: 2100 kWe Engine Speed: 750 rpm Frequency : 50 Hz Voltage Output: 6000 V Sale Includes: Engine and Alternator along with control panel for each generator and engine components ( such as built in pumps, turbo charger and other engine parts and supports)
; Gross weight [kg]: 10213; Engine: Cummins KTA50-G3; Accessories: Battery, Control Panel, Including: Engine coolant and alternator heater
3-channel foil nozzle EDS FSK-600 with flex lip (tire tubes) Output capacity: 40 -50 kg/h Lip adjustment with screws and storage beams in the main layer Film width: max. 600 mm Film thickness: 0.1 – 3.0 mm 3 computer-calculated hanger channels for optimal melt distribution Distribution: A 10-15%, B 70-80%, C 10-15% Drilled nozzle lip for liquid temperature control 9 heating zones with high-performance cartridge heaters Connected load for nozzle: 18 kW (0.5 kW x 36) Fully wired for 240 V / single-phase Nozzle dimensions (L x W x H): 450 x 650 x 400 mm, weight: 760 kg Coex adapter block for one middle and two outer layers Dimensions adapter (L x W x H): 320 x 210 x 400 mm Remark: Tool steel 1.2311 All flow surfaces are chrome-plated (25-30 μm)
Capacity: 120 Amp. – 19 kVA X-axis: 800 mm Y-axis: 600 mm Z-axis: 400 mm Table dimensions: 1,100 x 700 mm Distance head - table: 950 mm (max) Oil retainer: 1,700 x 1,000 x 650 mm Workpiece weight: 4,000 kg (Max) Control: CNC Datic S120
maximum number of results exceeded
please refine your search
