129,524 used machines on RESALE, but how to find them? Machine Search
used
Key data: 1350 KW
Power 1800 HP Engine type V type V12 Speed 2300 RPM Bore 128 mm
System designation D8-IPS700 Configuration in-line 6 Crankshaft power, kW (hp) 405 (550) 2900 rpm Propshaft power, kW (hp) 384 (523) 2900 rpm Aspiration Twin entry turbo and compressor
System designation D8-IPS800 Configuration in-line 6 Crankshaft power, kW (hp) 441 (600) 3000 rpm Propshaft power, kW (hp) 419 (570) 3000 rpm
Product designation D6-IPS650 Crankshaft power Kw/Hp 353 /480 Propshaft power, kW /Hp 339 /461 Engine speed, rpm 3700
Max power 350 hp 3800 rpm Max torque 700 Nm Number of cylinder 6
Travel X/Y/Z: 500mm/350mm/500mm, table dimensions X/Y: 800mm/600mm, max. table load: 800kg, work bowl dimensions X/Y/Z: 860mm/620mm/350mm, max. electrode weight: 200kg, tool positions: 28, machine dimensions X/Y/Z: approx. 3000mm/3750mm/3000mm, weight: approx. 3340kg. Documentation available. On-site inspection is possible.
An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available.
table length: 500 mm table width: 250 mm ampere: 50 A x-axis: 290 mm y-axis: 200 mm z-axis: 300 mm total power requirement: 6 kW weight of the machine ca.: 1100 kg dimensions of the machine ca.: m CNC-Controlled Die Sinker The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A mobile diesel three-phase generator set with a Volvo engine and Stamford generator mounted on a Steyr truck is available. 1) Steyr 17S230 truck, payload: 17t, engine power: 230kW, platform length: approx. 9m, engine-gearbox and rear axle: MAN make, including additional tank with a volume of 2000l, mileage: approx. 400,000km. 2) Generator diesel engine Volvo TAD1631GE, power: 485kW, speed: 1500rpm, including exhaust gas turbocharger, intercooler, front radiator, starter, alternator, speed governor, connection housing, intake air filter with fine filter and intake air heating for colder outside temperatures. 3) Stamford HCI544F1 generator, type output (oversized): 670kVA, continuous output: 560kVA. The engine is integrated in the base frame with the fuel tank of the truck (400 l) and the auxiliary tank (2000 l). This makes it possible to produce 10000kWh of electricity at a time. Conditi ...
Number 68 Mosa generator set Type: GE 10 SXC Engine Lambardini Type: 9 LD 625-2 Power 10 KVA RPM 1500 Hours: 3988 Connection 16A, 32A The switch off control must be operated manually. Otherwise the unit will run Metrics: L: 1.45m H: 0.90m W: 0.75m Weight: approx. 250 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
Paxman - 12RPHCZ MK 7 Turbocharger Holset Model 6 Completely overhauled Unit price! 2 pieces available !
Key data: 36 KW, 45 kVA, 400 V
Power Generator Specifications: Model No.: EQ-I4536 Prime Rating: 45 kVA / 36 kW Standby Rating: 50 kVA / 40 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: NEF45AM1A Bore x Stroke (mm): 104 x 132 Displacement (L): 4.5 Compression Ratio: 17.5:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2220 mm Width: 960 mm Height: 1258 mm Weight open: 1045 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically paint-coated, welded steel chassis Fuel tank integrated into the chassis Industrial sil ...
Key data: 36 KW, 50 kVA, 400 V
Made in EU 30 months warranty Stamford Alternator ComAp Control Power Generator Specifications: Model No.: EQ-I5048 Prime Rating: 50 kVA / 48 kW Standby Rating: 55 kVA / 53 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: NEF45AM2 Bore x Stroke (mm): 104 x 132 Displacement (L): 4.5 Compression Ratio: 17.5:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2430 mm Width: 1056 mm Height: 1700 mm Weight open: 1040 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically paint-coated, weld ...
Commonrail pump As good as new with 400 hours
Key data: 170000 KW
Fully Equipped Diesel Power Plant – Over 170 MW Capacity This opportunity is not yet on the market — and won’t be found anywhere else. Contact us now to receive exclusive details and position yourself ahead of the market before the sale is public. END USERS ONLY
Number of working hours: 2462 h weight max.: 8,5 t weight: 12,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Buchdruckzylinder / Letter Press Zylidner DIE Cutter Heidelberg SBB Year 1968 - Serial-No. 32236 Size max.: 570 x 820mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 6.200kg3 Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame
Buchdruckzylinder / Letter Press Zylidner DIE Cutter Heidelberg SBD Year 1968 Size min. 290 x 400mm Size max. 640 x 890mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 6.200kg3 Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame
Halbautomatischer Stanztiegel / Automatic Platen Die Cutter Joh. Cietz PRESTO Year 2008 - Serial-No. EP51568 Format 370 x 480mm Weight 1100kgs Included frame and tools
Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg S Year 1958 - Serial-No. 12218 Size max.: 540 x 720mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 5.000kg3 Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame
Stanztiegel / DIE Cutter Tiegel Heidelberg OHTSerial-No. 171075 N
Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg KSB Year 1962 - Serial-No. KSB 308003 Papierformat / Size min. 125 x 150mm - max.: 400 x 570mm Druckgeschwindigkeit / Speed min. max. 5.000 sph Punching pressure: 60T Weight approx. 5.000kg3 Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include fram
Key data: 1185 KW, 1000 1/min
BECAUSE OF NEW MOTORIZATION THIS VERY NICE DEUTZ SBV6M 628 SHIP ENGINE REMOVED IN ROTATING CONDITION
Number of working hours: 2633 h weight max.: 8 t weight of the machine ca.: 13280 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1200 KW, 2000 kVA, 5200 V
Generators in Excellent condition. Make: Guascor Model: SF480TALG Mfg year: 2011 Alternator: WEG Power: 2000 kVA / 1200 kW Voltage: 5200 V Speed: 1800 RPM Frequency: 60 Hz Qty: 2 Low working hours
Key data: 1276 KW, 900 1/min
FOR SALE... COMPLETE 1 ENGINE SULZER 8 S 20 AT TURKEY TO WHOM IT MAY CONCERN; WE'VE 1 PC COMPLETE 1 PC ENGINE SULZER 8 S 20 EX GENSET ENGINE AT OUR STOCK PLS FIND ENGINE DTLS AT BELOW TYPE 8 S 20 REV 900RPM ENGINE SHAFT OUTPUT 1276kW YOB 1997 ENGINE HAS STD CRANK SHAFT. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST REGARD; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 aliagamarine.com TURKEY
weight max. in kg: 8 t Number of working hours: 2633 h height of stroke: 3750 mm weight of the machine ca.: 11600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2 x die-sinking EDM machines ZK Genius 700 BJ 1010 and 2019
Diesel - Forklift, Compact Forklift MORA Type M80CSFabr. No. 20087 Year of construction 2006Nominal load capacity 8 ton. Lifting height 3800 mmFork length 1800 mmFork carriage width 1460 mmOverall height 3030 mmTotal width 1460 mmTotal length without forks 3350 mmWeight 12740 kg- Duplex mast with 1950 mm free lift- 4 cylinders PERKINS diesel engine- Fully enclosed cab with heating- Electro-hydraulic tilting device for the cab- Hydraulic auxiliary steering- 2 front work lights, 1 piece
12-piece die block for die bending machine GEWAAbending tool for press brake, lower toolType: 0255/14Prism size: 16 mm for 90Prism angle: 88Countersunk depth: approx. 8 mmOverall height: 120 mmmax. Printing capacity per meter: 100 t/mFoot width from the die: 60 mmTotal length: 4175 mmSegment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mmWeight: 110 kgvery good condition; used
Key data: 200 KW, 250 kVA, 400 V
3x volvo penta canopy (silent)
Key data: 1257 KW, 1580 kVA, 400 V
Caterpillar 3512-B STD Serial No.: 8EM00341 1257KW 1580 kva stamford 400volt 50hz & 60hz possible scope: genset on frame and alternator control panel small accessories
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: knuckle-joint frame design: H-frame, monoblock openings in uprights: yes number of suspensions: 2 feedstock transport direction: left to right PRESS FORCES total force (nominal): 315 to nominal work capacity: 38 kNm PRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1200 mm thickness of bolster plate: 200 mm SLIDE slide force: 315 to table surface (left-right): 1995 mm table surface (front-back): 1100 mm stroke: 160 mm stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS) slide adjustment: 140 mm stroke rate (min.): 20 /min stroke rate (max.): 80 /min main drive power: 90 kW TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 555 mm distance between columns (H-frame): 2060 mm passline opening (free passa ...
Key data: 8750 KW, 10938 kVA, 11000 V
10.5 MW MAN Germany 18V32/40 HFO power plant, year 2014, average running hour : 10,000 hrs. Good shaped, well maintenance power plant for sales
Key data: 568 KW, 680 kVA
We currently offer: Cummins generator set Type: VTA 28 G5 Generator Meccalte Power: 680 KVA / 568 KW Built in 1995 Hz 50 RPM 1500 Hours: 153 Metrics: L: 4.75m H: 2.45m W: 1.50m Weight: 6.5 tons You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 74831 Gundelsheim Phone: 0049 1796710242
Key data: 648 KW, 810 kVA
We currently offer: Perkins generator set Type: 3012-TAG2A Generator Stamford Type: HC. I634G1 Power: 810 KVA / 648 KW RPM 1500 Hz 50 IP 22 AVR Control MX321 Year of construction 2002 Operating hours 74 Control cabinet not included You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
We currently offer: New Perkins 4 Cylinder Engines Type: 404A-22G1 2.2 liters RPM 1500 Power: 20.3 KVA You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
We are selling our die-sinking EDM system here because of a new acquisition. This is a machine that was sold by the company MATRA at that time. This is a DECKEL DE35C. In the meantime, the company Exeron has taken over the service. The travel is: X=600mm Y=400mm Z=400mm The die-sinking EDM system has a 4-fold electrode changer The control system on the machine was recently overhauled, the power supply and the UPS were renewed. The machine was also otherwise continuously checked and maintained by the Exeron company in the event of malfunctions. Machine is running and is still on the power for a possible test. Operating hours are: 33196 hours. Various tool holders can be part of the price negotiation.
Key data: 1185 KW, 1000 1/min
DUE TO NEW MOTORIZATION THIS VERY NICE DEUTZ SBV6M 628 RIGHT-TURNING SHIP ENGINE REMOVED IN THE ROTATING STATE
CATERPILLAR C 175-16 year 2011 hours 100 power 3000 kva includ dry cooler and muffler loaded now in paris
Key data: 3300 KW
We have 28 unit diesel main engine MTU with their gear boxes. For more information, do not hestitate to contact with us. Engines 1981 model but some of them revised 2010 by MTU.
Load capacity: 1600kg, load center: 500mm, motor power: 26kW, travel speed: 20km/h, gradeability: 37%, turning radius: 2000mm, lift height: approx. 4500mm, overall height: approx. 2150mm, weight: approx. 2900kg. The machine requires a new battery. An on-site inspection is possible.
Leopard 1 engine MTU Mercedes Model: MB 838 Ca-500 Power: 830 hp 10-cylinder multi-fuel engine with approx. 38 litres displacement Speed: 2200 Weight dry: 1930 kg Bore stroke mm: 165/175 Displacement/cylinder: 3.74 l Cylinder displacement: 10 V / 37.4 l
A Ueda Shiko Kikai (Seiko) flatbed die-cutting machine from the 1980s is available. Throughput capacity: approx. 3600 sheets/h, max. sheet length: 1370mm, max. sheet width: 970mm, min. sheet format X/Y: 530mm/300mm, machine dimensions X/Y/Z: approx. 8150mm/2350mm/2050mm, weight: approx. 20000kg. An on-site inspection is possible.
R1334 Power Generator Emergency Power Generator POLYMA/DEUTZ 80 KVA ---------------------------------------------------------------------- -------------------- installed in a truck trailer single-axle, was used on construction sites. Dirty outside by leaves and dirt Polyma Kassel 80KVA = 16A = 64 KW,Diesel engine Deutz type F6L912 7ßKW 95hp 2000 rpm., With diesel hand pump hose in canister and pump,With cable/plug 63 A, The trailer is not soundproofed, stood outdoors for years under canopy and is accordingly polluted More detailed pictures on request
Charmilles Form 20 Tabledimensions / T slots : 398,8 × 299,7 mm Tank dimensions: 208,2 L Longitidinal displacement X-axes: 300 mm Transversal displacement Y -axes: 200 mm Vertical displacement Z-axes: 250 mm Max weight on table: 350 kg
maximum number of results exceeded
please refine your search
