die cutting used for sale

STIGAL VXstandard plasma cutting machine, manufactured in 2010 in Poland, is used for precision cutting of workpieces with a maximum thickness of 57 mm. The open design with a very robust portal enables free sheet metal loading and guarantees exceptional stability during even the most demanding challenges. The entire workspace is covered by an extraction table with the ECTS system, which effectively levels the contamination generated during machining and ensures comfortable working conditions. All of this is complemented by an intuitive CNC control installed in the operator’s touchscreen control panel, allowing for machine control and control of all cutting process parameters. The STIGAL plasma cutting machine has also been retrofitted with an OB-R 400 rotator, which extends the machining range to tubes with diameters from 40 to 400 mm. Technical specifications of STIGAL VXstandard  ...

Inv. Num. : 7892 Type: TruLaser 8000 Producer: Trumpf Created: 2013 Parameters: Switch-on hours: 43109 h Hours: 28857 h Laser power: 6 kW Work table length: 8000 mm Work table width: 2500 mm Source: TruFlow 6000

Key data: 8000 mm, 2500 mm, 6000 W

8000 x 2500mm 6kw

BLM ADIGE fiber laser Year 2010 3000x1500 3000W loading/unloading Lantek License Hours about 20 thousand sheet thickness 20 mm. Iron and 8/12 Stainless Steel

S. No.: 6173431 Format (cm): 72 Equipment / Additional information: Side tables, safety barriers, air table, 1xreserve knife Special feature: The machine was modified by GOP, so that 72x102 cm sheets can be cut. Condition: Very good condition / total revised about 1.5 years ago

1x used cutting machine Polar 90 Ce Year of man.:1974

Pinacho Lathe S-90/180 - With digital display - Width: 200 cm - Depth: 85 cm - Height: 160 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

4 pieces diode laser system, Limo Diocut 1300 – used - : Price per piece from location: 1.950.-€ (net)! Manufacturer: LIMO (Lisotchenko micro-optics) Type: Diocut 1300 Year of Make: 2013 400V, AC +/- 10% 50/60 Hz I < 16A, 3 phase, + N + PE Condition: good, Available: immediately Location: Frankenberg camp / Saxony

For sale, we offer an Amada EML 3610NT punch-laser combination machine. The offered machine is used and in very good condition. Main features of the machine (overall): • Possibility of combining punching and laser burning • Automatic pick-up of details (suction cups for 45kg, small amount of perforation recommended) and replacement of pallets during the operation of the machine • automatic sheet feeding maximum length 3050x1500 and collection of residues after cutting, possibility of loading sheet metal during machine operation • Automatic bale boom 1500x400mm (two conveyor belts for details) • Turning station with 41 fixed and 4 rotating stations • 3 manually adjustable paws • Cutting elements on length 3020x1500 • Laser cut length 2000x1500 • Max. sheet thickness 6mm (due to brush table) • Thread function • Pneumatic low bracket Accessories for th ...

We offer for sale our Trumatic 5000R laser punching press. The machine is used and in very good condition. Basic data from the nameplate: Max cutting force: 220 kN Type 9121 No. 090038 Year of manufacture: 2001, spare parts Network: 400 V/50 Hz Connected load: 29kVA Supply voltage: 400V Ujznvnkmpx Control voltage: 24V= Necessary protection: 3x50A Compressed air connection: 7-14 bar Machine weight: 17500kg Main features of the machine: - Tool rail - 21 tools and 4 handles - Work surface 3070x1660mm - Max. sheet thickness 8mm - Axis of rotation of the tool head C1 and C2 - Form function - Thread function - Multibend function - Pneumatic press - Automatic sliding of details 500x500mm - Water-cooled servo motors Additional equipment of the machine: -Light barrier Softpunch function - Details of the slide sensor - Device for blowing out small details - Chi ...

Key data: 3000 mm

The laser system for automatic sheet metal processing consists of two - Laser cutting machines Bystronic ByAutonom 3015 - Bystronic ByLaser 6000 laser sources - Laser loading/unloading systems Bystronic Bytrans Cross 3015 - Bystronic Bycell Cross 3015 storage systems - Suction Donaldson DFPR06-SPRK Max. sheet length: 3000 mm Max. sheet width: 1500 mm Cutting range: 3048 mm (x), 1524 mm (y), 80 mm (z) Max. positioning speed: 120 m/min Max. axle acceleration: 30 m/s² Max. workpiece weight: 890 kg Laser power: 6000 watts Wavelength: 10.6 μm Max. structural steel: 25 mm Max. stainless steel: 25 mm Max. aluminum: 15 mm Location: Zweibrücken Another identical plant is available at the site. Professional assembly and loading are included in the offer.

The laser system for automatic sheet metal processing consists of two - Laser cutting machines Bystronic BySprint Fiber 3015 - Laser sources Bystronic Fiber 4000 - Laser loading/unloading systems Bystronic Bytrans 3015 - Bystronic storage systems - Suction Donaldson Max. sheet length: 3000 mm Max. sheet width: 1500 mm Cutting range: 3048 mm (x), 1524 mm (y), 70 mm (z) Max. positioning speed: 100 m/min Max. workpiece weight: 890 kg Laser power: 4000 watts Max. structural steel: 20 mm Max. stainless steel: 15 mm Max. aluminum: 15 mm Location: Zweibrücken Professional assembly and loading are included in the offer.

Key data: 4000 mm

Ref.Nr. 00792 Name of the system: Used laser cutting machine Manufacturer: Bystronic Model Bystar 4020 Year of construction 2015 Power On (August 2024) 27.749 h Cutting time (August 2024) 9,665 h Power 6000 watts Control Byvision Working area 4000 x 2000mm Cutting range 170mm Interchangeable table system with 2 interchangeable tables + Extraction system + Cooler Cuttable thicknesses (max) steel 25mm Stainless steel 25mm Aluminum 15mm Footprint l x w x h 13850mm x 7300mm x 2350mm Machine weight 18000 kg Condition Technically very good condition Delivery by arrangement Immediately possible

M. No.: 6386927 Format (cm): 55 Equipment / Additional information: Side tables, safety barriers, 1xreserve knife Hydraulic precision drives for knives and press beams Continuously adjustable pressing pressure with display 99 memory programs with up to 99 steps

Paper cutting machine Polar D 56 ECO Year of construction 2019 Kind. Model No. PS6297 (L920) Price: 15500 FCA

Renovated slicer JAC EEM 450/11. Thanks to its dimensions it is suitable for bakeries, grocery stores. Easy to use, quiet operation. slice thickness 11 mm blade oiling system 400 Volt 50 Hz maximum bread size (width x height) 30 x 16 cm. removable crumb collector equipped with wheels

- Color Display - TouchScreen - Program - Side table right - Air side table left - KNORR Lift - POLAR R2 Jogging table - Spare knife

Tip height: 265 mm Center width: 1500 mm Circumferential Ø: over bed 540 mm Spindle bore: 65 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 9 - 1800 rpm Feeds: longitudinal/flat 0.063-2.24/0.032-1.12 mm/rev Thread pitches: 0.35 - 560 mm Electrical connection: 380 V, 11 kW Space requirement: 4580 x 1250 x 1330 mm Weight: 3200 kg

Tip height: 250 mm Center width: 1500 mm Circumferential Ø: over bed 500 mm Spindle bore: 56 mm Spindle mount: size 8 Pick-up cone tailstock: 6 MK Spindle speeds: 11.2 - 1400 rpm Feeds: longitudinal/flat 0.027-3.8/0.013-1.9 mm/rev Thread pitches: 0.5 - 36 mm Electrical connection: 380 V, 2 x 5.5 kW Space requirement: 3600 x 1250 x 1300/1600 mm Weight: 3000 kg

plate thickness:15 mm total power requirement:13 A 9 KVA weight of the machine ca.:50 kg dimensions of the machine ca.:1000 x 400 x 650 mm

cutting range for steel to:20 mm total power requirement:3~ 220 / 380 V weight of the machine ca.:100 kg dimensions of the machine ca.:500 x 750 x 1000 mm

cutting width:2500 mm Numbers of torche:2 Type of gas:Sauerstoff, Propan total power requirement:2 kW length:6000 mm control:KS 20 A Messer Griesheim Documents:vorhanden

table width:2300 mm table length:7000 mm burner heads:1 Plasma -Schneidk. burner heads:2 autogene Schneidköpfe control:NBS 400 Documents:vorhanden

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095

Additional information Compressed Air Plasma Cutting Machine Brand: Hyper Welding Type: CUT-120 Condition: Unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 40 mm Connection: 380 volts Adjustable amperage: 20-120 amps Start: Ahead duty cycle: 60% duty cycle (120 A) Duty Cycle (%) 60 Efficiency (%) 85 Power factor 0.75 Insulation level H Protection class of the shell IP21S Recommend compressor pressure during cutting (B)

Automatic bread cutting machine Automatic bread slicer of modern design is made of stainless steel and fully complies with CE standards It is designed for large capacity and serial bread cutting It has a system for packing sliced bread It is easy to transport as well as to clean and maintain By removing the drawer in the lower part of the machine, the crumbs are emptied so that the machine does not require any additional maintenance Dimensions: 242 × 75 × 135cm Electrical power: 0.85kW Weight: 312kg Capacity: 1500 loaf / h Slice thickness: 6-15mm

Unused Rated power: 9.2 kVA Rated current: 14 A Open circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: SPL-P 12001.20 Year of Make: 2007 CNC control 1 plasma torch with power source Kjellberg HiFocus 160i Extraction table: 2 x 12 m Donaldson Torit DCE filter system

New Zig-Zag Cutter! Machine is designed to cut an 800mm Batch into an endless strip for Extruder feeding. 12 month Warranty! Description attached!

For the purpose of pillow filling; mounted on profile steel mobile base;

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated input current: 29A Rated Input Power: 19KVA Open circuit voltage: 280V Output current setting: 30-120A Rated output voltage: 128V Cyclic continuous factor: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact arc ignition Weight: 38KG Dimensions: 690 x 335 x 575

Key data: 400 mm, 800 mm

For sale TOS lahe SU80/8000 y.m. 1963/2008 Diameter above the bed: 800 mm Circulating diameter above the slide: 495 mm Distance between centers: 8000 mm Machine dimensions (wxd): 1845x11175 mm Machine cca weight: 10000 kg The lathe has a lot steady rest and DRO ESSA

Unused Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated Input Power: 5.5KVA Open circuit voltage: 243V Output current setting: 20-40A Rated output voltage: 96V Cyclic continuous factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc flash due to contact Weight: 6.9KG Dimensions: 375 x 155 x 300

Thread cutting unit Suhner Tapmaster, serial no.: 623302-00101/12

VSG Cutting table with roller conveyor used Manufacturer: LISEC/ BYSTRONIC Year: 1996 Cutting width max. approx. 306 cm Dimensions cutting table approx. 7 m, 3.8 x 1.1 m; Dimensions roller conveyor approx. 6 x 3 x 1.1 m; The roller conveyor can be tilted hydraulically. The plant has been dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Condition: used and unchecked.

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated Input Power: 9.2KVA Open-circuit voltage: 256V Output current setting: 20-60A Rated Output Voltage: 104V Cyclic continuous factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Contact arch striking Weight: 14.7KG Dimensions: 535 x 210 x 380

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Unused Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated Input Power: 5.5KVA Open circuit voltage: 243V Output current setting: 20-40A Rated output voltage: 96V Cyclic continuous factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc flash due to contact Weight: 6.9KG Dimensions: 375 x 155 x 300

VSG glass cutting table with roller conveyor and conveyor belts used Manufacturer: BYSTRONIC Year: 1996 Cutting width max. approx. 306 cm Dimensions cutting table total approx. 8 x 5 x 1.8 m Dimensions roller conveyor approx. 6 x 3 x 1 m The roller conveyor can be tilted hydraulically Conveyor belt approx. 6 x 3 x 1 m Conveyor belt approx. 3 x 3 x 1 m Table approx. 2.7 x 3.5 m The plant has been dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Unused Rated power: 9.2 kVA Rated current: 14 A Open circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Unused Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated Input Power: 5.5KVA Open circuit voltage: 243V Output current setting: 20-40A Rated output voltage: 96V Cyclic continuous factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc flash due to contact Weight: 6.9KG Dimensions: 375 x 155 x 300

Glass Slices Cutting Table Used HEGLA VSG A 37 Year: 1997 Total dimensions: approx. 11.5 x 4.4 x 2.5 m Hydraulically tiltable loading table with air cushion and conveyor belt The plant has been dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Equipped with F2100B control and Conti-Weld Cinti-Pac 105NH power source, usable table size approximately 2700x1450mm, total size approximately 3500x2250x1500mm.