die cutter used for sale

End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool -Diameter: 80 mm -Milling height: 75 mm -Recording: SK50 -Manufacturer: Hoffmann -Type: KRE80-321 -Order No.: 229.810.00 -Weight: 7.8 kg

Wooden entrance length: min. 130 mm Max. 1000mm Ø370mm Wood cross-section: Min. 20x40mm Max. 80x180mm Wooden output length: Min.3700mm Max.7400mm Tine version vertical/horizontal 10/11 3.8mm pitch PVAC White Glue, 2-sided glue application Connected load 65 kW

One used cutting machine Polar 115 XT Tochscreen photocells chromed table Air table

Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 80 mm -Milling height: 75 mm -Adjustment: SK50 -Manufacturer: WIDIA -Type: 06306 Widax M30 -Number: 3x milling cutters available -Price: per piece -Dimensions: 224/100/H100 mm -Weight: 5.6 kg

Wooden entrance length: min. 130 mm Max. 1000mm Ø370mm Wood cross-section: Min. 20x40mm Max. 80x180mm Wooden output length: Min.3700mm Max.7400mm Tine version vertical/horizontal 10/11 3.8mm pitch PVAC White Glue, 2-sided glue application Connected load 65 kW

Infeed Belt, Integrated Pre-Stacker, Integrated Control Panel, Security Guards, Delivery Belt, Max Untrimmed Size: 12.20" x 15.74" x 3.14", Max Trimmed Size: 11.80" x 15.27" x 3.14", Min Trimmed Size: 3.90" x 4.72" x 0.78", Max Thickness: 3.15", Max. Stacking Height: 3.14", Front Cutt-Off Width: 1.57", Head And Tail Cutt Off Width: 1.96", Capacity: 6.600 Cycles/Hour

Alexanderwerk Colloid Mill Fine Shredder E75-FN Continuous cutter with stainless steel housing Machine runs absolutely smoothly and smoothly Funnel made of stainless steel, easily removable The cutting gap can be infinitely adjusted via funnel, thus individual fineness of the product can be achieved Machine has the usual signs of use and is in good condition, but must still be thoroughly cleaned before use. Video about test run available

1 piece of used, technically overhauled reinforcing steel shears. The scissors work electromechanically. The engine was remounted. V-belt renewed. Machine painted. Cut is triggered by means of a footswitch on the front. Max. cutting capacity: 1 piece 32mm. D. Reinforcing steel bars. Connected load: 3KW/400V/16A

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -with: LEUCO quick release system -Outer: Ø 192 mm -Height: 55 mm -Number: 4x recordings available -Price: per piece -Weight: 9.4 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -External milling cutter: Ø 180 mm -Height: 14 mm -Socket: Ø 35 mm -Radius -1x: right -1x: left -Price: complete -Weight: 9.1 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 302 mm -Height: 12 mm adjustable -Disk milling cutter -Socket: Ø 60 mm -Number: 2x milling cutters available -Price: per piece -Weight: 14.8 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 300 mm -Height: 12 mm -Disk milling cutter -Socket: Ø 60 mm -Number: 3x milling cutters available -Price: per piece -Weight: 12.7 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 80 mm -Height: 20 mm -R angle -Support: Ø mm -Number: 2x milling cutters available -Price: per piece -Weight: 0.5 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 160 mm -Height: 45 mm -Radius -Support: Ø mm -Weight: 5.6 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 180 mm -Height: 35 mm -Radius: 25 mm -Socket: Ø 30 mm -Weight: 5.8 kg

creasing + cutting machine for board - slotting Make Krasue Model Creasing machine Creasing length 105 cm Creasing depth adjustable/variable Cutting length 30 cm slotting Cuting width 4 mm Function creases and cuts board in 1 cycle for making boxes, maps, etc. Available Direct

Slitter rewinder Euromac The machine is like new and has only 5800 bh Applications :Foil, Paper _Laminate and Ethylenium Foil, Flexible film =15 μm - 200 μm Paper = 30 to 120 g/mm² Aluminium foil: Coated aluminum foil 25-70 my, Laminated Alufoils 40 -150 g/m2 Embossed Alufoils 105 -160 my Max. working width = 1200 mm Min. working width = 25 mm Max. speed = 500 m/min, Diameter rewinder = max. 600 mm 2x friction shafts = 76 mm, 2x friction shafts = 150/ 152 mm, 2x expansion shafts = 76 mm 2x expansion shafts = 150/ 152 mm The winding can be operated with contact (lay-up roller) or with gap. Unwinder (shaftless) diameter diameter max.= 1000 mm / core 76/ 150 /152 mm, Cutting system = paper cutting, Side Edge Control Manufacturer BST Gluing table at the unwinder, Laser system for sleeve positioning Roll removal device, Trolley for changing the lowe ...

Sind cutter 200 liters with vacuum Type: SVC 200 Completely made of special stainless steel 200-liter bowl made of stainless steel Shaft speed 200/1800/3600 rpm Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in a set Dimensions: 260x220x195cm Electric power: 63 kW Voltage: 400 V, 50 Hz Weight 5.500 kg

Sind cutter 330 liters with vacuum Type: SVC 330 Completely made of special stainless steel 330-liter bowl made of stainless steel Shaft speed 200/1800/3600 rpm Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in a set Dimensions: 260x220x195cm Electric power: 105 kW Voltage: 400 V, 50 Hz Weight 5.500 kg

Offer gebr. Pipe saw, pipe cutting and chamfering machine Fabr. GF Type RA6 Specifications: Tube Outer Diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz Stepless speed 150 -270 rpm. Electronic speed levels 1 - 6 Power 1600 W incl. mounting plate used, in good condition

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Manufacturer: LEUCO -Type: Ø 212x40x60 20° -Outer: Ø 212 mm -Angle: 20° -Socket: Ø 60 mm -Hole circle: 100 mm -Number: 2x milling cutters available -Price: per piece -Weight: 8 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Wood cutter: with ETP Hydro-Grip -Outer: Ø 180 mm -Height: 46 mm -Socket: Ø 40 mm -Number: 2x milling cutters available -Price: per piece -Weight: 10 kg

Type: SC 200 Completely made of special stainless steel 200-liter bowl made of stainless steel Frequency speed regulation 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in set Machine dimensions in cm: Width: 220 Depth: 200 Height: 182 Electric power: 57 kW Voltage: 400 V, 50 Hz

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 300 mm -Height: 12 mm -Socket: Ø 60 mm -Number: 1 cutter -Price: complete -Weight: 5.5 kg

Type: SC 330 Completely made of special stainless steel 330-liter bowl made of stainless steel Frequency speed regulation 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in set Machine dimensions in cm: Width: 243 Depth: 230 Height: 182 Electric power: 80 kW Voltage: 400 V, 50 Hz

Type: SC 20 Completely made of special stainless steel 20-liter bowl made of stainless steel Knives speed frequent speed regulation (6 speed) Main cover made of special steel, stainless steel 3 knives in set Machine dimensions in cm: Width: 83 Depth: 63 Height: 91 Electric power: 1,5 kW Voltage: 380 V, 50 Hz

Cutter head, milling adapter, carbide milling cutter, indexable insert milling cutter, face milling head, milling head -Manufacturer: Widax-Heinlein diameter 173 mm -Type: M400 Ø160 R 12 607 -Number of teeth: 12 -Adjustment: SK50 -Dimensions: Ø 173/260 mm -Weight: 12 kg

RB sharpening machine for band saw blades, complete with stands and additional electrical panel. Machine not CE compliant, for export

PRIMULTINI sharpening machine for band saw blades, complete with trestles. Machine not CE compliant, for export

Punching force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shear Foot switch for stroke release Support table on the punching side Quick-change device Range of tools is included in the price

Shell end milling cutters, milling cutters, milling cutters, shell milling cutters -Manufacturer: WMW, shell milling cutter, milling cutter type N 9960 -Size: 160x63x50mm -Receptacle: Ø 50 mm -Dimensions of box: 175/175/H100 mm -Weight: 5.9 kg

Pappschere - Board Cutter Polar Mohr 110 Serial-No. 244 Cutting length max. 1200mm Table width max. 720mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Pappschere - Board Cutter Krause blau Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Yarn cutter, hand cutter, spinning tube cutter, hand cutter for spinning tubes -Manufacturer: Timmer, hand-held yarn cutter -Type:HSG-TG 6 -Cutting length: max. 235 mm -Use: for all common yarn carriers -Accessories: with operating instructions -Dimensions: 1060/510/H370mm -Weight: 74 kg

elektrische Pappschere - electric Board Cutter Robust PS 80 Serial-No. 19028 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Registereinschneidemaschine - Index Cutter Hunkeler RE 320 Serial-No. 4852/15 Schnittlänge maximal 320mm / Cutting length max. 320mm Schnitttiefe maximal 80mm / Cutting deep max. 80mm Schnittdicke maximal 10mm / Cutting thickness max. 10mm Buch dicke maximal 50mm / Book thickness max. 50mm Messe Geschwindigkeit 70Hub/minute / Knife speed 70stroke/min. Motor Bremsmotor 1,5PS / Motor - brake motor 1,5 PS Außenmaße: / Machine Dimensions: Länge 950mm / Length 950mm Tiefe 820mm / Deep 820mm Höhe 1370 mm / High 1370mm Gewicht ungefähr 380KGS / Weight approx. 350KGS Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Pappschere - Board Cutter Wilhelm Leo'S Nachfolger 19030 Serial-No. WLNS Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

shell end mills, cylindrical milling cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 150 x 15 mm, cross-toothed -Hole: Ø 32 mm -Weight: 1.2 kg/piece

shell end mills, cylindrical milling cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 125 x 12 mm, cross-toothed -Hole: Ø 32 mm -Quantity: 1x cutter available -Weight: 0.8 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, corner milling cutter -Manufacturer: Widax-Heinlein, face milling cutter SK50 -Type: M100 239.10.220 Ø80 41005 -Number of teeth: 6 -Dimensions: 95/90/H230 mm -Weight: 4.0 kg

shell end mills, indexable insert mills, porcupine mills, milling tools -Manufacturer: Seco, shell end mills, indexable insert milling cutters SK50 -Type: R 215 16 50 049 058 09 Ø 49 mm -Dimensions: Ø 100 x 230 mm -Weight: 3.6 kg

shell end mills, indexable insert mills, porcupine mills, milling tools -Manufacturer: Widax-Heinlein, shell end mills, indexable insert milling cutters SK50 -Type: M30 229.34.800 7 04 09 -Diameter: 61 mm, without inserts -Dimensions: Ø 97 x 235 mm -Weight: 3.8 kg

splitting wedge, separating wedge, pressing pliers, hydraulic crimping pliers, cable shears, cable cutter -cable cutters: Split wedge Separating wedge, hydraulic -Intermediate dimension: 95 mm -Wedge length: 100 mm -Number: 3x wedge tools available -Price: per piece -Dimensions: 550/100/H175 mm -Weight: 13.5 kg/piece

Registerstanze - Index Cutter Hunkeler RE 320 Serial-No. 50279/19 Cutting length max. 320mm Cutting deep max. 80mm Cutting thickness max. 10mm Book thickness max. 50mm Knife speed 70stroke/min. Motor - brake motor 1,5 PS Machine Dimensions: Length 950mm Deep 820mm High 1370mm Weight approx. 350KGS Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slice and portion cutter, cutter knife, cutter knife -Manufacturer: Knecht, cutter knives 4 pieces -Type: 05 R318 5 220 -Price/Delivery: complete -Dimensions: 320/300/H100 mm -Weight: 5.4 kg

Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, cutter knife 1 set / 3 pieces -Type: R320.5-09971 -Quantity: 2 sets of 3 available -Price: per set -Dimensions: 330/300/H70 mm -Total weight: 4.7 kg

Passepartout-Schneidemaschine / passepartout cutter Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, cutter knives 4 pieces -Type: R320 5 220 428 92 -Price/Delivery: complete -Dimensions: 330/300/H80 mm -Total weight: 5.6 kg

Cutter knife, cutter knife for chop choppers, chop cutter, dicing cutter, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, cutter knife -Type: R350 5 220V 0.R 230 92 -Quantity: 1 knife available -Dimensions: 390/230/H20 mm -Weight: 1.7 kg

Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, cutter knife 2 pieces -Type: R320 5 220 428 92 -Price/Delivery: complete -Transport dimensions: 370/230/H40 mm -Weight: 2.8 kg