dickow pumpen kg used for sale

Circular saw blade sharpening machine make WERKÖ type SWSK 1250Built in 1977for sharpening medium to coarser metal saw bladesTechnical specifications:Saw blade diameter Cold circular saws: 250 - 1250 mmHot circular saws: 900 - 1700 mmTooth pitch up to: 42 mmAbrasive double height: 25, 37, 50, 75 and 100xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0x a0xa0: per minute, where 25 andxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0x a0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0: 37 mainly forxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0x a0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0: serve the machine servesGrinding wheel revolutions: 2000 and 2500 rpm.Grinding wheel diameter: 250 mmCutter tooth can be tilted on both sides: up to 45 degreeCutting edge geometry for hot circular saws: = -4 degreexa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa ...

Post turning machine make FEINBAU type PM 1-HUBFabr. -No: 3473Tip width: 165 mmTop height: 110 mmgr. circulation diameter over bed: 220 mmover cross slide: 110 mmSpindle bore: 23 mm3 spindle speeds by directly on theSpindle drive motor: 690/1380/2850 rpm.Drive motor 380 V,: 690/1380/2850 rpm.: 0.22 / 0.37 / 0.5 kWSpace required: 400 x 830 x 1170 mmWeight: 160 kgused, from a service release, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Automatic machine for circular and gang saws, make VOLLMER type AT 500Built in 1961Technical specifications:Frame saws: any sizeCircular saw outer diameter: 120 - 800 mmTooth pitch: 12 - 80 mmTooth height: from 5 mm upwardsSheet thickness: 0.8 - 3.5 mmCabinet on each side: 0.3 - 1.5 mmWorking speeds: 16 teeth / minConnected load: 0.55 kWDimensions L x W x H: 1000 x 600 x 1200 mmWeight approx: 800 kglittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pipe and flange lathe make WISCH type RA 8-36Mash. -No: 9-3430light construction site machineTurning diameter: 80 - 400 mmClamping diameter: 80 - 365 mmminute Clamping length: 190 mmTool speeds: 11.3 / 22.6 rpm.Radial feed: by hand / by camMax. Travel: 95 mmFeed rates: 0.166 / 0.33 mm / rev.Axial feed: by handMax. Travel: 55 mmMax. Turning length for external turning work: 40 mmMax. Turning length for internal turning: 30 mmDrive power: 0.8 / 1.2 kWSupply voltage: 380 V / 50 HzDimensions approx L x W: 775 x 760 mmHeight above center (without carrying hook): 210 mmHeight below center: 320 mmTotal height: 530 mmWeight approx: 74 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your q ...

Saw blade sharpening machine make AUGUST HEINRICH SCHMIDT type AS 3Machine -No: 14136 built in 1964Technical specifications:for circular saw blades diameter: 20 - 300 mmTooth pitch up to: 22 mmwith graduated disk: 28 mmSaw blade width up to: 6.0 mmGrinding wheel diameter: 150 mmSpeed of the grinding wheel: 3500 rpm.Shifts infinitely variable: 70 - 200 rpm.Drive power: 0.37 kWWeight approx: 140 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Surface grinding machine make ABAYear of construction 1965Grinding area: 500 x 200 mmTable mounting surface: 500 x 200 mmGrinding wheel size: 200 x 30 x 51 mmWeight approx: 1500 kgDimensions approx: 1700 x 1050 x 1700 mmDrive power: 1.1 kWWith- Extraction system- Grinding dust collectorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: by bank transfer net or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are available for your queries every day.Best regardsM. WaldeckWAHO Machine Tools

Metal Lathe make COLCHESTER Type Master 2500 / 165x1000Fabr. -No: MCH No 5/0009/07505, year of construction 1979Tip width: 1000 mmTop height: 165 mmTurning diameter over bed: 335 mmTurning diameter over cross slide: 210 mmSpindle bore: 40 mm16 spindle speeds: 30 - 2500 rpm.39 metric thread pitches: 0.2 - 14 mm45 Whiteworth thread pitches: 2 - 72 tip18 module thread pitches: 0.3 - 3.521 diametrical pitch thread pitches: 0 - 44 DPLongitudinal feeds: 0.03 - 1.0 mmFeed rates: 0.015 - 0.5 mmDrive power: 3.7 kWExternal dimensions: 1985 x 890 x 1195 mmWeight approx: 890 kgWith- 3- jaw chuck diameter 200 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWA ...

Metal Lathe Fabr. WEILER Type Condor VSMasch. -No: 9127 built in 1979 with preselectionCenter height: 155 mmTip width: 800 mmGr. circulation diameter over bed: 320 mmxa0xa0xa0 via support slide: 170 mmSpindle bore: 38 mmMounting taper of the tailstock quill: MK 317 spindle speeds: 12 - 2800 rpm.60 feeds along: 0,037 - 1,253 mmxa0xa0xa0 plan: 1/2 of the longitudinal feeds35 metric thread pitches: 0.35 - 12 mm40 inch thread: 45 - 2 Gg / 25 module thread: 0.2 - 4 module32 diametrical pitch threads: 5 - 90 DPDrive motor: 380 V, approx. 3 kWDimensions L x W x H: 700 x 1830 x 1260 mmWeight approx: 815 kgWith- compl. electrical device- Lighting- Coolant device- Quick change tool holder Multifix m. morexa0xa0 steel holders- Three - jaw chuck Forkhardt 200 mm Drm.- Tool cabinet with contentused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net a ...

Grinding wheel balancing scale make HOFMANN type GS 2Fabr. -No: 88000931 Year 1988for surface grinding machines with flangeCapacity: 150 kgLength of the mandrel: 280 mmExternal dimensions: 760 x 450 x 570 mmWeight approx: 50 kgused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table Universal after Lathe Fabr. SEE Type RAPIDCenter height: 125 mmSpindle bore: 36 mmSpindle cone: MK 5infinitely variable spindle speeds: 465 - 4200 rpmTable mounting surface: 300 x 265 mmSupport longitudinal path: 100 mmSupport cross travel: 125 mmDrive power: 0.37 kWPower connection: 380 V / 50 HzWeight approx: 100 kgDimensions approx: 850 x 400 x 350 mmWith- without base- Three-jaw chuck 125 mm- clamping clawused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Swing arm grinding machine make JÄGER type UMA 19Order number. 4156, make -No: 6179, built in 1971Technical specifications:Grinding area at coordinate tableDisplacement approx. 240 x 300 mmMovement of the coordinate table: 150 mmMax. Sanding height approx.: 220 mmCup wheel diameter: 150 mmDrive motor 380 V, 2800 rpm. approx.: 0.8 kWSpace requirement: 450 x 870 x 1700 mmWeight approx: 320 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cylinder head grinding machine make SCLEDUM type RVA 300Technical specifications:Grinding area: 250 x 400/200 x 500 mmDimensions approx. 10:40 x 920 x 1600 mmWeight approx: 500 kgWith- motorized rotary tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal Lathe Make COLCHESTER Type Master 2500Fabr. -No: MCH No 5/0007/05812, built in 1977Tip width: 635 mmTop height: 165 mmTurning diameter over bed: 335 mmTurning diameter over cross slide: 210 mmSpindle hole: 40 mm16 spindle speeds: 30 - 2500 rpm.39 metric pitches: 0.2 - 14 mm45 Whiteworth thread pitches: 2 - 72 tip18 module thread pitches: 0.3 - 3.521 diametral pitch thread pitches: 0 - 44 DPLongitudinal feeds: 0.03 - 1.0 mmFlat feeds: 0.015 - 0.5 mmDrive power: 3.7 kWExternal dimensions: 1985 x 890 x 1195 mmWeight approx: 855 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Engraving Cutter Fabr. DECKEL type SONMachine -No: 24196max. radius to be ground: 10 mmmax. lateral displacement of the cutter holders: 10 mmmax. Longitudinal displacement of the milling cutter holder: 40 mmmax. adjustable back grinding angle: 45 °Gr. bore of the collet: 17.5 mmSpeed of the grinding spindle: 4500 rpm.Drive power: 0.25 kWDimensions L x W x H: 500 x 420 x 1400 mmWeight approx .:67 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tool grinding machine - steel grinding machine make SIMON type L 15Machine -No: 4924/4925 Year 19634 stationsEngine speed: 1400/2800 rpm.Number of stations: 4Power connection: 380 V / 50 HzDrive power: 0.55 / 0.9 kWOutside dimensions approx: 1120 x 510 x 1600 mmWeight approx: 300 kgWith- 2 lampsused and in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metall lathe manufactured by PINACHO type L-1/165Masch. -No: 11782Technical specifications:Tip height: 165 mmDistance between centers: 750 mmTurning diameter over bed: 330 mmTurning diameter in the crank: 480 mmSpindle bore: 42 mmSpindle mount: DIN 55022/518 spindle speeds: 30 - 2000 rpm.20 feeds: 0.047 - 0.86 mm / rev20 cross feeds: 0.021 - 0.39 mm / rev20 metric threads: 0.5 - 916 WW threads: 56 - 4 Gg / 1 20 module thread: 0.25 - 4.5 MDrive power: 2 / 3.8 HPDimensions: 1645 x 820 x 1260 mmWeight approx .: 800 kgWith- Three-jaw lathe chuck 200 mm- Multifix steel holder with multiple inserts- moving center pointused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regar ...

Tool grinding machine make DOEBELI type combination grindingMachine -No: D400.42 Year 1993Dimensions of the grinding wheels: 175 x 22 mmMotor power: 0.25 kWPower connection: 380 V / 50 HzWeight approx. 180 kgOutside dimensions approx: 900 x 600 x 1600 mmWith- Underframe- Cooling device- tiltable and swiveling workpiece holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal lathe make MYFORD type Super 7Technical specifications:Distance between centers: 330 mmTip height: 84 mmBed width: 76 mmSpindle bore: 15.5 mmTurning diameter over support: 98 mmInfeed per division: 0.02 mm12 spindle speeds: 25 - 2150 mmThread pitches metric: 0.2 - 3.5 mmThread pitches inch: 8 - 28 Gg / 1 Feeds: 0.1 - 0.25 mm / rev.Fine feeds: 0.009 - 0.004 mmDrive power: 0.9 / 0.52 kWWeight approx: 53 kgExternal dimensions approx: 910 x 660 x 400 mmWith- Four-jaw lathe chuck- Set of change gears- steel holder- drill chuck- mitl. Center point- Tapered roller bearings in the main spindleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machi ...

Double grinder bench, make GREIF type D 30 - 5 - 5 KTMasch. -No: 208478, year of construction 1984Technical specifications:Grinding wheel size: 300 x 50 x 76 mmCut-out: 130 x 30 mmSpeeds: 1500 rpm.Drive power: 1.5 kWPower connection: 380 V / 50 HzWeight: 200 kgExternal dimensions: 1100 x 450 x 1500 mmWith- K 36 + K 60 grinding wheels- Tool support 260 x 165 mm- Tool support can be tilted- coolant device- Dry and wet grinding- Eye protection glassused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tool grinding machine make AGATHON type 175 DIAMachine -No: 8091723 built in 1984Technical specifications:Grinding wheels with double cup diameter: 175 mmSpindle speed: 2700 rpm.Workpiece infeed: 0.01 mmFine angle adjustment max .: 26 degreeConnected load: 1.7 kWWeight approx: 300 kgDimensions approx: 1000 x 600 x 1500 mmWith- cooling device- suction- Equipmentused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Spiral drill bit grinding machine make GÜHRING type SS 13for the grinding of spiral drills made of high-speed steel or solid carbideand carbide tipped toolsGrinding range: 2 - 50 mmSand the tip: 2 - 50 mmThroat cross cutting: 5 - 50 mmSanding standard bevel at tip: 60 - 180 °Drive power / total power requirement: 3 hp / 3.3 hpExternal dimensions L x W x H: 1100 x 1600 x 1640 mmWeight approx: 1000 kgWith- various accessories- Coolant deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Spiral drill bit grinding machine make GÜHRING type SS 13Machine -No: 1003 Year 1967for the grinding of spiral drills made of high-speed steel or solid carbideand carbide tipped toolsGrinding range: 2 - 50 mmSand the tip: 2 - 50 mmThroat cross cutting: 5 - 50 mmSanding standard bevel at tip: 60 - 180 °Calibration device Vertical travel range: approx. 100 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa 0xa0xa0xa0xa0xa0xa0xa0xa0 Delivery area horizontal: approx. 130 mmDrive power / total power requirement: 3 hp / 3.3 hpExternal dimensions L x W x H: 1100 x 1600 x 1640 mmWeight approx .: 1000 kgWith- various accessories- Coolant deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are ...

Metal lathe make WMW Karl-Marx-Stadt type DLZ 355 x 1600Fabr. -No: 2410/60, built in 1960Technical specifications:Technical specifications:Turning length: 800 mmCircumferential diameter over bed: 355 mmCenter height: 180 mmSpindle bore: 35 mmTailstock tip taper: Morse 4Quill shift by hand: 140 mmTailstock shift of the upper part from the central position: 10 mmWorkpiece weight between the steadies: 630 kgbetween the tips: 400 kg18 spindle speeds: 18 - 2500 rpm16 feeds length: 0.071 - 1 mm / rev16 cross feeds: 0.036 - 0.5 mm / revmetric thread 16: 0.5 - 7 mmInch thread 28:60 - 4 turnsModule thread 1 0.25 - 3.5Main drive: 5.8 kWExternal dimensions: 2200 x 1060 x 1225 mm highWeight: 1900 kgWith- three-jaw chuck- Steel holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding.  ...

Twist drill grinding machine make WERKÖ type SWB 4Machine -No: 702 built in 1988Max. Grinding range: 0.3 - 4 mmMax. Drill length: 90 mm4 point angles: 90/118/130/140 °Bevel angle: 0 - 27 °Connected load: 0.25 kWPower connection: 380 V / 50 HzExternal dimensions: 420 x 550 x 450 mmWeight approx: 35 kgused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal lathe make TOS type SV 18 RAMachine -No: 018100830833, year of construction approx. 1980Technical specifications:Distance between centers: 1000 mmCenter height: 180 mmCircumferential diameter over bed: 380 mmCircumference diameter over support: 215 mmSpindle bore: 41 mmSpeed range: 14 - 2800 rpm.Longitudinal feeds: 0.02 - 5.6 mm / revFlat feeds: 0.01 - 2.8 mm / revmetric pitches: 0.2 - 140Inch thread: 1/5 - 140/1 DP thread: 1 - 224 DFModule thread: 0.2 - 70 M.Drive power: 6.0 kWDimensions approx: 2200 x 1000 x 1400 mmWeight approx: 1800 kgWith- Steel holder- three-jaw lathe chuck- moving center pointused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. Wa ...

Twist drill grinding machine make SCHANBACHER type S 3-50Machine -No: 80 1018Technical specifications:Grinding range: 3 - 50 mmPoint angle: 90 - 140 °adjustable clearance angle and relief grindingGrinding wheel dimensions: 175 x 32 x 20 mmGrinding wheel drive: 380 V, 0.25 kWGear motor for swivel movement in the machine framebuilt-in: 0.12 kWDimensions approx .: 600 x 850 x 1200 mmWeight approx: 120 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Twist drill grinding machine make WERKÖ type SWB 4Machine -No: 327 built in 1978Technical specifications:Max. grinding range: 0.3 - 4 mmMax Drill Length: 90mm4 point angles: 90/118/130/140°Relief angle: 0 - 27°Connection value: 0.25 kWPower connection: 380 V / 50 HzExternal dimensions: 420 x 550 x 450 mmWeight approx.: 35 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal lathe make GRAZIANO type SAG 210Technical specifications:Distance between centers: 1000 mmCenter height: 210 mmCircumferential diameter over cross slide: 268 mmCircumferential diameter in the crank: 580 mmSpindle bore: 57 mmBed width: 330 mmLength of the offset with the driving flange: 316 mm24 spindle speeds: 38 - 2000 rpm.80 longitudinal feeds: 0.020 - 0.44 mm80 cross feeds: 0.010 - 0.22 mm40 WW thread: 46 - 340 metric pitches: 92 - 640 module thread: 0.25 - 2.875 mod.Leadscrew pitch: 3/8 Rapid traverse: 6000 mm / minDrive power: 7.5 kWDimensions: 2700 x 1400 x 1370 mmWeight approx: 2270 kgWith- three-jaw lathe chuck- Multifix steel holder with several inserts- fixed bezel- moving center point- cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Error ...

Twist drill grinding machine make HAASE type WS 20Machine -No: 40175Technical specifications:Grinding range: 2 - 20 mmDrilling angle adjustment: 60 - 180°Stepless milling angle adjustment: 0 - 25°Power connection: 220 V / 50 HzApprox. weight: 12 kgExternal dimensions approx.: 400 x 300 x 250 mmwith- 2 clampsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Draw spindle precision lathe Fabr. WMW Mikromat Dresden Type DZFG 200 x 500Fabr. -No: 7960, year of construction approx. 1986Technical specifications:Tip width 500 mmTop height 165 mmgr. circulation diameter over bed 315 mmGr. orbital diameter over cross slide 200 mmTurning length between the tips 560 mmgr. workpiece diameter for bar work 31 mmGr. chisel cross section 20 x 20 mmPassage of fixed set stick 100 mmPassage of the walking stick 70 mmgr. workpiece mass between the tips 50 kg9 spindle speeds 56 - 2800 rpmRotary feeds with increments of 1.25xa0xa0xa0longitudinal 0.02 - 0.8 mm / revxa0xa0xa0plan 0.02 - 0-4 mm / revThread feeds metric thread lengthwise 0.2 - 60 mm / revxa0xa0xa0plan 0.2 - 30 mm / revInch thread lengthwise 60 - 1/2 Gg / xa0xa0xa0plan 60 - 1 Gg / Module thread lengthwise 0.1 - 28 mm / revxa0xa0xa0plan 0.1 - 14 mm / revDiametrical pitch thread lengthwise 240-1 3/8 Gg  ...

Slotting machine RUWO-HAHNDORF type SEW 52/300Machine -No: 66/7880 built in 1966Butt length: 300 mmGroove width max .: 32 mmSmallest bore: 40/17/6 mmCutting speed: 5 m / min.Faceplate diameter: 360 mmDrive power: 1.1 hpWeight: 220 kgOutside dimensions: 780 x 400 x 120 mmWith- Underframeused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal lathe make MEXPOL / PONAR type TUR 50 SMachine -No: 45499 built in 1985Technical specifications:Distance between centers: 1000 mmCenter height: 250 mmCircumferential diameter over bed: 500 mmCircumferential diameter over support: 300 mmSpindle bore: 80 mmShort cone: size 836 spindle speeds: 18 - 1800 rpm.42 feeds lengthways: 0.64 - 26 mmacross: 0.32 - 13 mmMetric thread pitches: 42Inch thread: 42Diametrical pitch thread: 42Machine weight: 2720 kgRequired space approx .: 2500 x 1300 x 1630 mmWith- Acu-Rite digital display- three-jaw lathe chuck- faceplate- 4-way steel holder- 1 steady rest (fixed)- 1 moving center punchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your querie ...

Hor. Grooving machine make RUWO HAHNDORF type REWK 52/10Machine -No: 81620 Year 1981Butt length: 300 mmGroove width when pushing: 32 mmGroove width when clearing: 10 mmkl. Bore diameter when pushing: 40/17 mmkl. Bore diameter with spec. Grooving knives: 6.0 mmkl. Bore diameter when broaching: 6.0 mmCutting speed: 3.0 m / min.Traction: 2.0 tDrawing length in 2 moves: 500 mmRäädadellänge max.: 640 mmFaceplate diameter: 360 mmDrive power: 1.5 hpWeight approx: 230 kgLength of the machine: 780 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical shaping machine manufactured by RAVENSBURG type S 200Technical specifications:Large stroke of the ram: 200 mmRam adjustment: 200 mmRound table diameter: 440 mmThroat: 410 mmGroove width max: 32 mmHeight between table and ram guide: 370/470 mmLongitudinal table displacement: 375 mmCross table displacement: 350 mm4 lifting speeds: 33/49/75/110 H / min6 feeds, lengthways per slide stroke: 0.03 - 0.3 mmacross per ram stroke: 0.07 - 0.7 mmround per ram stroke at 100 mm diameter: 0.05 - 0.5 mmDrive power: 3.0 kWDimensions approx: 1000 x 1600 x 2200 mmWeight: 2000 kgWith- Round dividing tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Ma ...

Plan copy lathe make RAVENSBURG type K 600 KHKom. -No: 8792 built in 1972Technical specifications:Turning diameter over bed: 1000 mmTurning diameter over facing slide: 600 mmfor face plates up to: 800 mm dia.max.distance between faceplate and support: 600 mmLongitudinal feed: 1 - 170 mm / minPlan feed: 1 - 170 mm / minMain spindle diameter: 166.68 mmSpindle bore: 80 mm12 spindle speeds: 1.7 - 600 rpm.gr. torque on the faceplate: 500 mkggr. workpiece weight: 500 kgDrive power: 22 kWWeight approx: 5.8 tExternal dimensions L x W x H approx .: 3500 x 2000 x 2000 mmWith- swiveling control panel- separate control cabinet- hydr. Copier- Thyristor drive- separate hydraulicsWITHOUT the lining shown!used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be plea ...

Vertical slot broaching machine make ROSCHER & EICHLER type ST 3Year of construction 1962Technical specifications:Projection: 350 mmTable size: 650 x 250 mmNumber of ram strokes per minute: 45 - 73 - 125largest stroke of the ram: 180 mmLongitudinal movement of the table by hand: 420 mmLongitudinal movement of the table automatically: 400 mmCross movement of the table by hand: 150 mmAutomatic transverse movement of the table: 145 mmVertical movement of the table by hand: 300 mmgreatest height between table and ram guide: 400 mmExternal dimensions L x W x H approx.: 1230 x 1250 x 1700 mmWeight approx: 850 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. Wa ...

Vertical machining center make BRIDGEPORT type Interact 412Machine -No: 73440A built in 1988Table size: 840 x 320 mmTravel X: 450 mmTravel Y: 310 mmTravel distance Z: 300 mmMax. Table load: 250 kgSpindle speed: 40 - 4000 rpm.Spindle mount: ISA 40Feed range: 0 - 4.5 / 7.5 m / min.Rapid traverse: 12 m / min.Number of tools in the changer: 12Max. Tool diameter: 75 mmMax. Tool length: 250 mmMax. Tool weight: 6.0 kgTool change time: 8,0 sec.Drive power: 5.5 / 3.7 kWWeight approx: 2,3 tOutside dimensions approx: 1910 x 1850 x 2000 mmWith- Heidenhain TNC 355 CNC control- Vice- several tool holdersused, in working order, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM.  ...

Vertical slot broaching machine make ROSCHER & EICHLER type ST 3Machine -No: 9273 built in 1961Technical specifications:Projection: 350 mmTable size: 650 x 250 mmNumber of ram strokes per minute: 45 - 73 - 125largest stroke of the ram: 180 mmLongitudinal movement of the table by hand: 420 mmLongitudinal movement of the table automatically: 400 mmCross movement of the table by hand: 150 mmAutomatic transverse movement of the table: 145 mmVertical movement of the table by hand: 300 mmgreatest height between table and ram guide: 400 mmExternal dimensions L x W x H approx.: 1230 x 1250 x 1700 mmWeight approx: 850 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regard ...

Hardness tester make VEB Leipzig type HPO 3000Fabr. -No: 309/36 built in 1982Load levels: 3000 kp / 29420 NError limit of load levels: +/- 1%Outreach: 200 mmlargest clamping height: 365 mmTest bench with clamping grooves: 260 x 400 mmOptical measuring device with eyepiece measuring microscope, magn. : 25 timesand micrometer, scale value: 0.01 mmViewing Neckline: diam. 7 mmDial gauge for monitoring the test procedure: Drm. 100 mmMeasuring range: 0 - 5 mm1 pointer revolution: 1 mmScale value: 0.01 mmOperation: electro-hydraulicelec. Connection: 220 V, 60 HzConnected load: 1.2 kVAExternal dimensions L x W x H: 920 x 420 x 1400 mmWeight: 530 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available ...

Vertical slotting machine make BEHR type ST 150Machine -No: 096, built in 1955Technical specifications:large stroke: 150/175 mmSlide adjustment: 150 mmInclination of the ram in both directions: 5/8 degreeProjection: 450 mmHeight of table / UK ram guide: 260 mmRound table diameter: 340 mmLongitudinal displacement of the table: 320 mm3 lifting speeds: 17/54/108 H / min.large groove width: 16/26 mmWeight approx: 1000 kgExternal dimensions approx .: 960 x 1530 x 2030 mmWith- Feeds in X and Y (forwards and backwards) Adjustable speed- Adjustment of the rotary table manually- without the chuckused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. Walde ...

Measuring machine make MORA type 0190Fabr. -No: 16079/0888 year 02/88 for measuring rotational parts(as used to measure propellers)in 2 levels, in conjunction with a pivot point with encoderMeasuring height: 1500 mmMeasuring width: 1200 mmDistance of the pivot point from the measuring stand: 1400 mmInstallation height from the chuck to the highest position of the chuckProbe: 1260 mmChuck with inner jaws: 240 mm Drm.Space requirement with internal jaws: 2550 x 750 x 2550 mmWeight estimated approx .: 700 kgWith- Digital display with keyboard for X and Z attached to the machine- Turn-Check-Program MS-DOS Version 1.3 for measuringxa0propellers- EPSON FX 1000 printer- Calculator PEALOCK- Monitor- Measuring head RENISHAW with various buttons- technical documentsused, from an operational resolution, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Pay ...

Vertical slotting machine make WMW Meuselwitz type StS 400Serial no. 4178.20.61, built in 1961Technical specifications:Stroke: 400 mmRound table diameter: 850 mm6 ram strokes: 18 - 56 / minCutting speed: 2 - 70 m / minFeed per cut: 0.14 - 1.4 mmConnected load: 9 kWExternal dimensions L x W x H: 2800 x 2000 x 3300 mmWeight: 6200 kgwith- swivel headused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Grooving machine make RAUSCH type RS 1/800Year of construction 1964Clearing power: 1.0 tStroke: 800 mmMax. Groove width: 20 mmMax. Tool length: 1000 mmClearing speed: 3.0 m / min.Return speed: 6.0 m / minTable size: 320 x 220 mmDrive power: 1.5 / 3.0 kWWeight: 340 kgExternal dimensions approx: 700 x 600 x 1500 mmWith- several guide sleevesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical broaching machine make RAUSCH type RS 3/1000Fabr. -No: 3289536, year of construction 1980Traction: 3 tStroke: 1000 mmMax. Groove width: 20 mmMax. Tool length: 1200 mmClearing speed: 3 m / minReturn speed: 6 m / minDrive power: 1.7 kWDimensions L x W x H: 540 x 720 x 1460 mmWeight approx: 250 kgWith- several guide sleeves- 1 set of broaches 4/6/8/10/12/14 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal grooving and broaching machine manufactured by HENNING type KM 350Masch. -No: 19001 Year of construction 1976Technical specifications:Clearance length: 350 mmDimensions approx .: 2100 x 1000 x 1300 mm weight approx .: 1200 kgWith- Accessories on guide sleeves, broaches- Operation switch pushing / clearing- Reverse and set-up operation- Reversal soft - hard- coolant deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

5-way combined profile steel shears make PEDDINGHAUS type 210 Super 13Machine -No: 580AC015 built in 1979Technical specifications:Flat steel: 200 x 13 mmL-steel: 120 x 13 mmU-steel: 180 mmRound steel: 45 mmSquare steel: 40 mmPunching force: 65 tholes: 27 in 19 mmor: 90 in 5.5 mmStroke: 25.5 mmProjection: 370 mmWeight approx: 2100 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal bed milling machine make NIIGATA type 2 UMCMachine -No: 62950 Year 1986Table size: 1370 x 310 mmTable longitudinal path = X: 870 mmTransverse travel = Y: 370 mmVertical travel = Z: 400 mmDistance table to spindle: 50 - 450 mmSpindle mount: ISA 5012 spindle speeds: 40 - 1750 rpm.9 longitudinal and transverse feeds: 20 - 800 mm / min9 vertical feeds: 9 - 355 mm / minRapid traverse longitudinal and transverse: 3000 mm / minRapid traverse vertical: 1375 mm / minDrive power: 5.5 kWFeed motor: 1.5 kWDimensions L x W x H: 1825 x 2005 x 1745 mmWeight approx: 3000 kgWith- 3-axis digital display Anilam- Milling head can be swiveled from vertical to horizontalused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and a ...

Motorized punch PEDDINGHAUS type Forax 25 EMasch -No: 4220252183013 Year 1983Punching force: 25 tDischarge: 185 mmPunches: 27 in 7with special device: 39 in 5or: 58 in 3.5or: 90 in 2.2Stroke length: 18 mmStrokes per minute: 58Installation height: 189 mmWeight approx: 340 kgWith- Footswitch- Underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Univ. Bed milling machine make NIIGATA type 3 UMAYear 1978Table surface: 1600 x 380 mmTable longitudinal path X: 1000 mmTransverse Y: 420 mmVertical path Z: 400 mmSpindle mount: ISA 5016 spindle speeds: 45 - 1400 rpm9 feeds longitudinal and transversal: 20 - 800 mm9 vertical feeds: 5 - 200 mmRapid traverse longitudinal and transverse: 3000 mm / minxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0 vertical: 750 mm / minMax. Table load: 700 kgMax. Distance between stand / spindle: 470 mmMax. Distance table / spindle head: 70 - 470 mmDrive power: 11 kWWeight: 3.9 tExternal dimensions: 2245 x 2280 x 1830 mmused, despite the year of construction ingood conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.B ...

Universal punch make EDEL type VM 40/350Machine -No: 24735456 Year of construction 1976Punching force: 40 tProjection: 350 mmStrokes per minute: 60Punches: 24 in 12or: 50 in 6Klinkleistung: 100 x 100 in 5 mmDrive power: 2.2 kWWeight approx: 1100 kgOutside dimensions approx: 780 x 1300 x 1750 mmWith- Rectangle - Notecards (currently furnished)- Tool carrier for punching out punch 68 mm- many punching tools- Footswitchused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools