dickow pumpen kg used for sale

5-fold combined profile steel shears with notching device and hole punchMake MUBEA type HIW 550/510Machine -No: HIW550/510/94 built in 1999Technical specifications:Flat steel scissors: 350 x 13 mmAngle steel shears L-steel 90°: 140 x 13 mmL-steel 45°: 70 x 7 mmSteel bar shears round/ square: 45 / 42 mmNotch: 10 mmPunching force: 55 tProjection: 510 mmpunches: 30 in 16 mmInfinitely variable punch stroke: 0 - 60 mmNumber of strokes of the punch at 20 mm path: 42 strokes / minDrive power: 5.5 kWWeight approx.: 1600 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric forklift make KÖTTGEN type ESK 1000 / 2SGSMachine -No: 43602, built in 1987/92Load capacity: 1000 kgStroke: 5200 mmwith battery: DETA 4 Pz S 400 80 Vand charger: DETA D 80 v 60 Aused in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Punching machine make EDEL type punching professional 400 SMachine -No: 2951392 Year 1992Punching force: 40 tWorking area: 1500 x 900 mmTravel depth stop: 450 mmTravel length stop: 750 mmTool size up to: 100 or 135 mmMaterial thickness up to: 12 mmPunching examples: 100 in 3.5 mmor: 30 in 10 mmPunching sequence (about time interval): 1.5 sDimensions L x W x H approx : 1500 x 1500 x 1700 mmWeight approx: 2000 kgWith- several toolslittle used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tiller-guided electro-hydr. Tool lift Fabr. BAKA type EGV 60/605Masch. -No: SOE 27555 built in 1998 with drive Load capacity: 700 kgTable size: 1400 x 600 mmretracted height: 800 mmextended height: 1100 mmStroke: 300 mmBattery power: 24 VDead weight: 400 kgOutside dimensions approx: 1900 x 600 x 1100 mmWith- Battery 24Velec. Travel drive- Emergency stop switchvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric forklift make STILL type EFG 12Machine -No: 09261065, built in 1972Payload: 1200 kgMax. Lifting height: 4000 mmFork length: 1400 mmNet weight: 2410 kgpermissible total weight: 4.0 tHeight with retracted mast: 2150 mmWidth: 1000 mmWith- Battery 24V / 700 AKxa0xa0 12 cells / 605 kg, year 4/90- Duplex mast- chargerdespite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Diesel forklift make LINDE type H 60 DWFabr. -No: 329C95002680 built in 1992Technical specifications:Lifting capacity: 6.0 tDead weight: 10060 kgLifting height: 4.0 mDimensions approx: 5800 x 1850 x 2600 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic punching machine make PEDDINGHAUS type Hydraulik 1000Masch. -No: 4207873785003, year of construction 1985Printing power: 1000 KNStroke infinitely adjustable: 10 - 100 mmNumber of strokes: 34 - 80 1 / minDischarge: 760 mmInstallation height: 500 mmDrive power: 380 V / 15 kWpunches e.g. up to: 31 mm Ø in steel: 25 mmwith special punch saddle e.g. up to: 58 mm Ø in steel: 13 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa 0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0 e.g. up to: 90 mm Ø in steel: 8.5 mmWeight approx: 3600 kgOutside dimensions approx. W x H x D: 1200 x 2450 x 1900 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. W ...

Inclined lift trailer make Böcker type Piccolo 20 / 0-4Fabr. -No: 27470, built in 1996Load capacity: 200 kgextendable from: 5.14 - 20.10 mRope diameter: 6 mmEngine type: motorhydaulischEngine: HondaDrive power - petrol engine: 8 kWWeight approx: 840 kgTotal length approx: 6540 mmbuilt on single axle trailerWith- slack rope safety- Slewing ring can be locked in three positionsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic scissor Lift Fabr. VEB TakrafCapacity: 3000 kgPlate size: 2500 x 800 mmPlate height: 185 mmMax. Lifting height: 1060 mmHeight lowest state: 550 mmEngine power: 2.2 kWMax. Pressure: 100 barColor whiteWith- mobile on wheels- each 5 clamping eyelets right and left on the plateused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatic punching machine make EDEL type HP 16-600 SBFabr. -No: 20104Punching force: 16 tPunching capacity: 24 in 5 mmor: 40 in 3 mmor: 50 in 2 mmfor tools up to: 70 mmDischarge: 600 mmStamp recording: 24 Drm. x 85Die height: 78 mmRam stroke: 13 mmDistance scraper - die: 6.5 mmAir requirement per punching: 45 NLMachine weight: 600 kgExternal dimensions machine L x W: 300 x 1050 mmUnderframe: 1100 x 560 x 380 mmWith- Steel base- Material support table- Quick change tool setsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mobile work platform make EIFEL type E III 1Fabr. -No: 7102 built in 1979Payload: 300 kgLifting height: 7.2 mWorking height approx.: 9,0 mPlatform size: 1000 x 1200 mmStand area: 1700 x 1100 mmEngine power: 1.5 kWTotal length chassis: 2750 mmWeight approx.: 680 kgused..Price on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC punching machine make EDEL type Microcut 211Machine -No: 30287 Year 1998Punching force: 200 kNDirect working area: 1500 x 1000 mmTool size up to: 100 mm diameter, as well as forms: within this circular areaMaterial thickness up to: 4 mmfree passage up to approx. 30 mmWiper system: sprungTool System:: Noble Quick Change ::: Tool head 30x120 / 146x40Total connection value: up to: 16 kVA (400 V, 50 Hz) Protection class: IP54, control voltage 24 V,: DCWidth x depth x height: 3350 x 3750 x 1800 mmWeight: 7500 kgIncl.:- Mechanical and control technology REVO - M Basic equipment for the use of turret tools- ram stroke programmable (instead of manual adjustment)- CNC LOGO and programming with workpiece graphics- 1 set of set-up elements with leveling device- CNC CAD programmer software in standard version- 6-fold Rev. tools- Tools for Rev. Ø 4,2 - Ø 6,5 - Ø 8,5 / right 18x6 wide side fron ...

Laser cutting system make LSS LASER LAB type CONTOUR 3015/ 020 SLABTechnical specifications:Cutting area: 3000 x 1500 mmLaser source :Rofin-Sinar Laser DC 020- Output Power Range / Guaranteed:200 - 2000 W/ 2000 W- Performance stability:+- 2% (24h)- Laser beam quality Drm. : < 25mm- Beam index: K > 0.8- Pulse generator, pulse frequency: 0 or 8 - 5000 Hz Pulse Width: 26ms-CW- Laser gas: Rofin-Sinar special premix Consumption: < 0.3 Nl/hCutting capacity (according to the LSS company) approx. :10 - 12 mmRapid traverse: 10 m/min.programmable Z axis: 175 mmHigh-pressure cutting up to:20 barBeam data: 10.6 kgBeam quality: 20 - 25 mm K09Directional Stability: 0.15 mrad.Polarization linear:45°Pulse characteristics: 2 - 5000 HzLaser gas: 0.15 NL/h.Laser head dimensions: 1700 x 800 x 853 mmWeight laser head approx.: 500 kgDimensions control cabinet: 800 x 600 x 1900 mmWeight control cabinet approx ...

Hydraulic scissor lift manufacturer WMW type HT 20500Masch. -No: 16 built in 1990Load capacity: 2000 kgTable size: 2500 x 1250 mmLifting height: 1600 mmHeight: 440 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Copy and coordinate nibbling machine make TRUMPF type CN 701Machine -No: 1118Technical specifications:Horizontal projection: 1550 mmWorking area: 1250 x 1300 mm: 1250 x 2000 mmSmallest section of a circle for copy nibbling: 12 mmsmallest circular diameter with internal circular guidewhen shearing: 56 mmsmallest circular diameter with internal circular guidewhen nibbling: 65 mmstepless stroke rates: 350-1400 H / minWorking height: 1020 mmDrive power: 2.2 kWExternal dimensions approx .: 2900 x 950 x 2130 mmWeight approx: 2125 kgWith- lots of accessoriesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Scissor lift table make SAX LIFT A / S type IL 1000 SB-STechnical specifications:Load: 1000 kgUseful stroke: 1050 mmConstruction height: 250 mmMax. Height: 1300 mmLifting time: 34 secSize of the usable area L x W: 2800 x 1000 mmDrive power: 1.1 kWWeight approx: 300 kgWith- Hand switch with up / down- emergency stop- safety bar- railings- Platform with checker plateused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric construction hoist type BoyManufacturer No .: 36817 Year 1994Load capacity: 150 kgHead: 40 mRope diameter: 4 mmNominal strength: 1960 N / mm2Power: 0.85 kWCurrent type: 220 V / 50 HzWith- Control cable and bottle- storey supportused, from an operational resolutionin very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Bendless automatic lathe make INDEX type E 60Fabr. -No: E 6072107 Year 1972largest material passage: 60 mmChuck diameter: 136 mmmax. thread diameter: M 30 / M 24Speed range: 134 - 2420 rpm.Working distance: 80 mmRapid traverse path: 50/62 mmlargest longitudinal path: 80 mmDistance quill to collet: 60 - 230 mmFeed infinitely variable: 5 - 3400 mm / minDrive power: 5.5 kWDimensions L x W x H: 1510 x 850 x 1500 mmWeight approx. 2000 kgWith- bar feed- various change wheels- hydr. Power Chucks- long turning device- Copy machine Fabr. SauterusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Turning Device / Load Turning Device / Tool Manipulator Fabr. KS-KABELSCHLEPPYear of construction 1988Capacity: 12 tSpeed: 4.2 m / minAcceleration: 0.2 m / sBelt width: 120 mmLength and thickness of the belt depend on the load to be usedDimensions L x W x H: 4293 x 1900 x 1000 mmDrive power: 2 x 1.1 kWDead weight: 2680 kgWith- Cable drum HK KTN 220 / 251Sused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tiller-guided lift truck make SCHEFER type 1101030SpecialMasch. -No: 12011904-1 / 013 year of construction 2012Max. Lifting capacity: 1.0 tLifting height: 166 mmFork width: 160 mmFork length: 2500 mmWeight approx: 180 kgWith- CE markused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Single spindle lathe make INDEX type ER 25Mash. -No: 25751408max. workpiece passage Drm.:25 mmxa0xa0xa06-edge: 21 mmxa0xa0xa0Square: 16 mmmax. workpiece feed p. Circuit: 70 mmmax. thread diameter: M 16 / M 14Speed range: 14 - 5750 rpm.Number of automatically switchable speeds: 4Number of overdrive speeds: 26Number of slow speeds: 234Turret diameter: 120 mmTool holder cone: 3/4 Turret processing: 60 mmDistance collet - Turret: 60 - 150 mmFeed rate infinitely variable: 16 - 2800 mmFeed rate continuously variable: 40 - 7000 mm / minRapid forward / backward: 10/25 m / minSwitching time: 0.75 sCross slide travel: 44 mmLongitudinal adjustment of the upper slide: 20 mmContinuous feed of the cross slide: 5 - 1000 mm / minDriving power: 4 kWDimensions L x W x H: 1900 x 1020 x 1650 mmWeight approx: 1650 kgWith- 8-fold revolver- 2 vertical parting carriages- 2 horizontal cut-off slidesused, in very ...

Cam-type single-spindle turning machine make MAS Kovosvit type A 50 CA.Make -No: 007 built in 1991Max. Drm. of bar stock Infeed / Outfeed: 52/60 mmMax. Length of the bar material: 3000 mmMax. Displacement of the bar stock at feed: 90 mmSpeed range: 15 - 2244 rpmNumber of supporters: 4Max. Working stroke height of the supports: 45 mmNumber of turret settings: 6/8Max. Working stroke - height of the turret: 85 mmMax. Threaded by taps Thread:in steel: 24 x 1.5 mmin brass: 36 x 1.5 mmWeight: 2490 kgConnected load: 10 kVAExternal dimensions L x W x H: 2150 x 1125 x 1970 mmWeight: 2530 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vacuum lifter for wood make FEZER type Vacofix 274700Machine No: 83355 Year 1987Load capacity: 360 kgCarrying length: 5000 mmDead weight: 480 kgDimensions approx .: 5000 x 1800 x 700 mmWith- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Turret lathe make MANURHIN type Dekomat 50Mash. -No: 3005-157Spindle bore: 50 mmgr. rod cover: 42 mmgr. Diameter of the chuck: 160 mmGr. working diameter: 120 mmSpindle drive pol. Engine: 4/8 hpNumber of programmed speeds: 4Number of speed groups: 5Speed range: 75 - 3200 rpm.Number of turret positions: 8long stroke: 150 mmLarge planing stroke: 49.7 mmgr. Radius difference when copying: 17 mmNumber of longitudinal feeds per cycle: 3 (+ 4 )Number of feedrates per cycle: 2 (+ 1 )Feed range longitudinal: 0-425 mm / minFeed range flat: 0-150 mm / minRapid traverse: 7 mm / minExternal dimensions without bar feed: 2300 x 1200 x 1500 mmWeight: 2000 kgWith- separate control cabinet- Connector panel controlusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you  ...

Flat belt grinding machine make MAFAC type NT 300 SFabr. -No: 417643 Year 1986Tape dimensions: 2000 x 300 mmBelt speeds: 6, 8, 10, 12, 16, 20 m / srequired air pressure: 5 - 6 barDrive power: 9.3 kWDimensions L x W x H: 1440 x 1200 x 2047 mmWeight approx: 500 kgWith- Table motorized vertical and horizontal- wet grinding device- pneum. belt tension- Deburring and chamfering deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hobbing machine make PFAUTER type RS 1Machine -No: 3108 built in 1941Technical specifications:largest diameter for face and worm gearswith / without counter holder: 400/750 mmlargest milling width for spur gears (up to 275 mm dia.over 275 mm diameter): 295 - 315 mmSmallest number of teeth to be milled: 12largest module division: 8Helical gearsHelical tooth angle: 10 ° 30 ° 45 ° 60 °largest millable wheel diameter: 750/600/500/200 mmMillable widths for the largest diameter: 270/270/270/270 mmmillable widths at Drm. under 275 mm: 260/250/245/235 mmClamping table diameter: 580 mmTable bore: 100 mmgreatest collet tension for shafts (large material passage64 mm): 65 mmsmallest axis distance between milling cutter and workpiece: 30 mmlargest axis distance between milling cutter and workpiece: 440 mmDrm. of the workpiece mandrel: 36 mmDrm. of the milling arbors: 27-32-40 mmLargest clampable ...

Belt sander, make UNKNOWNTechnical specifications:Band width: 40 mmSupport table: 400 x 265 mmExternal dimensions: 550 x 700 x 1500 mmWeight approx: 80 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cycle controlled lathe make WEMAS type HITURN 320Machine -No: 24 built in 1999Turning diameter over bed 320 mmTurning diameter over cross support 150 mmTip width 800 mmSpindle bore 50 mmCone in the spindle - metric 60Motor power at 1500 rpm 7.0 kWSpindle speed rangeControl system Heidenhain 1st row 0 - 1000 rpm. 2nd Row 20 - 4000 rpm.X-axis diameter of the lead screw 20 mmLeadscrew pitch 5 mmMax. Stroke 190 mmRapid feed 7500 mm / minMax. Feed force 3000 NAccuracy of repeated position adjustment 0.008 mmY-axis diameter of lead screw 25 mmLeadscrew pitch 5 mmMax. Stroke of the support carriage : 750 mmRapid feed : 8000 mm / minMax. Feed force 5000 NAccuracy of repeated position adjustment 0.008 mmTool head Multifix Bmax diameter of the steel 25 x 25 mmtailstockPinhole diameter 65 mmQuill stroke 125 mmCone of the quill Morse 4Dimensions 2160 x 1594 x 1875 mmWeight approx 2150 kgWith- HEIDEN ...

Double grinding machine / double grinding block make REMA type DS 30/400 AFabr. -No: 02703 with built-in extractionGrinding wheel size 400 x 40 x 127 mmGrinding wheel speed 1450 rpm.Drive power 3 hp - 2.2 kWFlow rate 10 m3Power connection 380 V, 50 HzWeight approx. 240 kgDimensions 960 x 732 x 1188 mmWith- built-in suction- Standard versionused, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double bench grinder manufactured by VEB Leipzig type DS 200/2-No: 399259Technical specifications:Grinding wheel size: 200 x 32 mmMax. Speed: 3000 rpm.Power consumption: 900 W.electrical connection: 220/380 V, 50 HzWeight: 19 kgWith- 2 grinding wheels- baseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC lathes make SPINNER type TC 65 CMachine -No: 050023 built in 1996Technical specifications:Distance between centers :600 mmSwing diameter over bed: 400mmMax. turning diameter: 310 mmAdjustment path X-axis: 200 mmAdjustment path Z-axis: 500 mmAdjustment path Q-axis: 500 mmC-axis adjustment range:360°max. rapid traverse: 20 m/min.Feed: 0 - 15 m/min.Main spindle passage: 65 mmMax. spindle speed: 4000 rpm.Counter spindle passage: 26 mmMax. spindle speed: 6000 rpm.Quill diameter: 80 mmQuill stroke: 100 mmNumber of turret stations: 16-foldMain spindle motor: 14 kWTotal connection value: 20 kWWeight approx.: 4500 kgDimensions approx.: 1700 x 2200 x 1700 mmwith- Control Siemens 820 T- 16-fold revolver- counter spindle- C axis- 8 powered tools- Parts catcherused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment. ...

Cylindrical grinding machine Fabr. MAYER & SCHMIDTTop height: 130 mmTip width: 800 mmTotal power requirement: 4 kWMachine weight approx.: 1500 kgSpace required: 2100 x 1200 x 1450 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC lathes make SPINNER type TC 108 MCMachine -No: 040199/98215 built in 1998Technical specifications:Distance between centers: 1000 mmSwing diameter over bed: 520 mmMax. turning diameter: 358 mmAdjustment path X-axis: 296 mmAdjustment path Z-axis: 1090 mmMax. rapid traverse X-axis: 18 m/min.Max. Z-axis rapid traverse: 24 m/min.Bar Capacity: 107mmSpindle speed: 2500 rpm.Quill diameter: 110 mmQuill stroke: 100 mmNumber of driven stations:12Connected load: 50 kVAWeight approx.: 6500 kgDimensions approx.: 3590 x 1750 x 1890 mmwith- Control Siemens 810Dused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Internal cylindrical grinding machine make KARSTENS type ASA 500Top height: 175 mmTip width: 500 mmDimensions LxTxH: 1850 x 1200 x 1300 mmWeight approx: 1500 kgWith- swiveling workpiece spindleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Prec. Revolving Lathe (Post-Lathe) make WEILER type RDU 38Masch. -No: 2371/1287 built in 1973Center height: 125 mmMax. Circumference diameter over bed: 260 mmMax. Circumferential diameter over cut-off carriage: 125 mmTop width: 380 mmSpindle passage: 38 mmSpindle mount: DIN 800 A12 spindle speeds: 125-2800 rpm.Drive power: 0.9 kWDimensions L x W x H: 1300 x 600 x 1200 mmWeight approx: 400 kgWith- Collet device- Parting support- 6-fold revolver tailstock- additionally flanged collet chuck Nannxa0xa0 with 16 collets up to 35 mm diameterused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Precision universal cylindrical grinding machine make ZIERSCH & BALTRUSCHType URS 751Serial -No: 84119, year of construction 1984Technical specifications:Center height: 130 mmDistance between centers: 750 mmmax. workpiece diameter with new disc: 245 mmPermissible workpiece weight between the tips/in the chuck: 120/60 kgLONGITUDINAL SLIDEmax travel:900mmspeed hydr. infinitely variable: 0.05 - 5 m/minTravel per handwheel rotation Position 1/ 25.5 mm/ 10 mmGraduation mark of the handwheel position 0.1 mmReading Accuracy:0.01mmCROSS SLIDERapid feed and return: 40 mmManual adjustment: 54 mmTravel of one hand wheel turn: 1 mmgr. Insertion depth: 1.4 mm/Drm.Plunge feed: 0.05 - 10 mm/minGRINDING HEADSTOCK3 grinding spindle speeds: 1580, 1750, 1970 rpm.Coarse adjustment: 155 mmSwiveling of the grinding headstock:+ - 30°Drive power of the grinding headstock: 4 kWWORKHEADInfinitely variable speed: ...

Precision universal cylindrical grinding machine make ZIERSCH & BALTRUSCH type URS 750with internal grinding deviceMake -No: 220 built in 1976Technical specifications:Center height: 130 mmDistance between centers: 750 mmmax. workpiece diameter with new disc: 250 mmPermissible workpiece weight between the tips/in the chuck: 120/60 kgLONGITUDINAL SLIDEmax travel:900mmspeed hydr. infinitely variable: 0.05 - 6 m/minTravel per handwheel rotation position 1/ 25 mm/ 10 mmGraduation mark of the handwheel position 0.1 mmReading Accuracy:0.01mmCROSS SLIDERapid feed and return: 40 mmManual adjustment: 54 mmTravel of one hand wheel turn: 1 mmgr. Insertion depth: 1.4 mm/Drm.Plunge feed: 0.05 - 10 mm/minGRINDING HEADSTOCK3 grinding spindle speeds: 1580, 1750, 1970 rpm.Coarse adjustment: 155 mmSwiveling of the grinding headstock:+ - 30°Drive power of the grinding headstock: 4 kWWORKHEADInfinitely vari ...

Universal cylindrical grinding machine make WMW Karl-Marx-Stadt type SU 315 x 1500Machine -No: 8486Technical specifications:Largest swing diameter: 315 mmLargest grinding length: 1500 mmLargest workpiece mass: 300 kgLargest diameter grinding wheel: 630 mmlargest width: 200 mmBore: 305 mmGrinding spindle speed at V = 35 m / s. : 1060/1200/1400 rpm. at V = 50 m / sec: 1500 rpm.Connected load: 12.6 kWWeight approx: 5.8 tused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table universal lathe make Fabr. SEE type RAPIDMachine -No: 3264Center height: 125 mmSpindle bore: 36 mmSpindle cone: MK 5infinitely variable spindle speeds: 465 - 4200 rpmTable mounting surface: 300 x 265 mmSupport longitudinal path: 100 mmSupport cross travel: 125 mmDrive power: 0.37 kWPower connection: 380 V / 50 HzDimensions (H x W x D): 850 x 500 x 1250 mmWeight approx:200 kgWith- Underframe- Three-jaw chuck 125 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal external cylindrical grinding machine make ZIERSCH & BALTRUSCHType URS 400 Ergonomy Masch. -No: 80052 built in 1981Technical specifications:Grinding length: 320 mmCenter height: 100 mmDistance between centers: 400 mmGrinding wheel size: 350 x 50 x 127 mmGrinding wheel speed: 1800, 1970, 2170 rpm.Pivotability of the grinding spindle head: 45 °Infeed of the grinding support: 0.001 - 0.025 mmPlunge grinding infeed: 0.05 - 10 mm / min.Swiveling of the table: 10 °Table speed stepless: 0.04 - 5.0 m / min.Drive power: 3.0 kWWeight about 1550 kgWith- Internal grinding device- Set of collets- cooling system- dresserused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries ...

High precision turret lathe manufactured by SCHAUBLIN type TR 102 HPMasch. -No: 167073, year of construction 1966controlled hydropneumaticallyTechnical specifications:Tip height: 102 mmBed length: 900 mmDistance between headstock and turret: 300 mmCollets passage: 22 mmNumber of places in the revolver: 6Bore diameter: 20 mm6 spindle speeds: 840 - 3000 rpm.Feed rates: 0.02 - 2 mm / minFast delivery: 8 m / minrequired air pressure: 5 - 7 atmAir consumption: 5 - 10 m3 / hDrive power: 2.5 HPWeight approx: 670 kgExternal dimensions: 1930 x 590 x 1680 mmWith- Collet insert- bar feed- various accessoriesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO ...

Vertical honing machine make KADIA type VPH 120/350Fabr. -No: 75241 Year 1975Stroke length: 350 mmMax. Diameter: 25 - 150 mmTable size: 350 x 700 mmPinole diameter: 85 mmInstallation height: 1000 mmDischarge: 300 mmDrive power: 4 kWDimensions L x W x H: 800 x 1400 x 2500 mmWeight approx. 4000 kgWith- separate hydraulic unit- Cooling devicelittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Engraving cutter grinding machine Fabr. Feinmechanik Weilheim type SOMash. -No: 7012906gr. radius to be ground: 10 mmgr. lateral displacement of the cutter holders: 10 mmgr. Longitudinal displacement of the milling cutter holder: 40 mmgr. adjustable back grinding angle: 45 °Gr. bore of the collet: 17.5 mmSpeed of the grinding spindle: 4500 rpm.Drive power: 0.25 kWDimensions L x W x H: 500 x 420 x 1400 mmWeight approx: 67 kgWith- 9 pieces collets- Underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mot. Single disc grinding machine make SKINTOOLFabr. -No: 048031 Year 1999Disc size: 305 mmTable size: 334 x 240 mmTilting of the table: 0 - 45 °Max. Grinding height: 180 mmSpeed: 2850/1420 rpm.Drive power: 1.12 kWPower connection: 380 V / 50 HzWeight approx: 26.5 kgOutside dimensions approx: 570 x 440 x 465 mmWith- miter stop- tiltable table- several grinding wheelsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal disc sander Fabr. UnknownTechnical specifications:Plate diameter: 550 mmThickness of the grinding wheel: 60 mmExtraction nozzle diameter: 80 mmExternal dimensions: 800 x 600 x 900 mmWeight approx.: 250 kgWith- Dressing deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mechanic lathe make WEILER type Primus MD / GMachine -No: 2728-1Technical specifications:Distance between centers: 430 mmCenter height: 120 mmTurning diameter over bed: 195 mmTurning diameter over cross slide: 135 mmCircumferential diameter over bed: 250 mmBed width: 155 mm18 spindle speeds: 60 - 3000 rpm.Spindle bore: 23 mmDrive power: 1.2 / 1.5 kWDimensions: 1200 x 650 x 1330 mmWeight: 340 kgwith- three-jaw chuck- Multifix steel holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pipe bend grinding machine make GLASER type GRS 33-VMachine -No: 188/07 built in 2007Technical specifications:Grinding range: 10 - 80 mmAbrasive belt size: 735 x 30 mminfinitely variable speed: 725 - 1450 rpm.Engine power: 2.2 kWPower connection: 380 V / 50 HzDimensions approx.: 890 x 650 x 1350 mmApprox. weight: 165 kgWith- Cooling device- Infinitely variable drive- Post grinding beltsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Saw blade sharpening machine make AUGUST HEINRICH SCHMIDT type AS 4Machine -No: 15079 Year 1966for circular saw blades diam.: 20 - 400 mmfor circular saws up to diam.: 550 mmTeeth pitch up to: 22 mmwith dividing disc: 28 mmSaw blade width up to: 6.0 mmGrinding wheel diam.: 150 mmGrinding wheel speed: 3500 rpm.Circuits continuously adjustable: 70 - 200 rpm.Drive power: 0.55 kWWeight approx: 150 kgWith- Underframe- grinding wheel- EquipmentusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mechanic lathe make WEILER type Primus MD / GMachine -No: 2729-1Technical specifications:Distance between centers: 430 mmCenter height: 120 mmTurning diameter over bed: 195 mmTurning diameter over cross slide: 135 mmCircumferential diameter over bed: 250 mmBed width: 155 mm18 spindle speeds: 60 - 3000 rpm.Spindle bore: 23 mmDrive power: 1.2 / 1.5 kWDimensions: 1200 x 650 x 1330 mmWeight: 340 kgwith- three-jaw chuck- Multifix steel holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Saw blade sharpening machine make WERKÖ type SWSK 200Machine -No: 958, built in 1959Technical specifications:Circular saw blade diameter: 15 - 200 mmTooth pitches: 0.7 - 15 mmGrinding wheel strokes: 80 - 180 H / minGrinding wheel diameter: 125 mmPower connection: 380 V / 50 HzConnected load: 0.4 kWDimensions approx: 810 x 460 x 1290 mmWeight approx: 180 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools