We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,281 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
AGFA ADC Compact with: Readout unit/ID tablet Workstation complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.
used
CNC laser cutting machine Bystronic Bystar 3015 - Total power 125 KVA Co2 laser source Bylaser Power 5200 watts, CNC rotary axis for chuck 315 mm with counter bearing for pipe processing cutting power ST37 - approx. 25 mm stainless steel 1.4301 approx. 20 mm, aluminium approx. 12 mm cutting speed max. 50 m/min, positioning simultaneously max. 113m/min car. Loading device Byloader with sheet metal dusting device Only one-layer operation ! approx.27,500 power-on hours - approx. 6000 hours of laser hours; ready for immediate use
used
Used compressed air container storage facility, in top condition Compressed air system fully installed in a 20 ft steel container, 2 x Boge VLEX screw compressors with 65 KW (overhauled a year ago, new screw elements, engines newly stored, new shooter and completely new compressor control, with overarching control. Delivery quantity at maximum maximum maximum press 10 bar 2 x 9 m ³/min, free to control with 2 x 9 m ³ or together 18 m ³/min. In addition, in the container is a built-in container with 500 lite, a cyclone separator, Beko cold dryer type. RA, and compressed air filter 2 fold, Mirco filter and activated carbon filter, condensate treatment is done via an oil water separator. The too and exhaust air are discharged via ventilation ducts, and can be sealed with electrically motor locking flaps. Container includes 4 electric heaters (thermostat controlled), and an electric sub ...
used
Sato LS 2000 Working Range: 2000mm x 6500mm CNC 3010 Topaz Touch Screen 1 x Plasma Ultra Cut 200 ( Cutting up to 35mm ) Donaldson Suction System. To visit . Installation and commissioning on request; ready for immediate use
used
Laser cutting machine Bystar 3015 with Bylaser 4000 , 4 KW laser source incl. interchangeable table system, cooling system, kompl. Switch cabinet combination with CNC and laser control, operator protection in the cutting area, 2 cutting buttons, reflection absorbers, cross-jet , documentation documentation laser a 19,000 h maintained by Bystronic.
used
Bystar 3015 5.2 KW operating hours: 30,100 h (as of April 11, 2017) cutting hours: 10,760 h (as of April 11, 2017) Year of construction: 2004 Available from: August 2017 ; ready to use
used
CNC plasma cutting system working range: 1500 x 3000mm OTC Superplasma 12000 Cutting up to 20mm quality cutting New control ProDNC from Micompan data transfer via USB; ready to use
new
Colour JET 2 Paint mist extraction Rated motor power: 0,75 / 2,1 kW Engine speed: 96 min 0/1,430 Air volume: 3,000 / 6,800 m ³/h Effective pressure: 400 / 500 PA Dimensions closed (W/H/D): 1,012 x 1.405 x 943 mm Folded dimensions (W/H/D): 1,897 x 1.405 x 1,166 mm Pre-and fine filter filter area: 1 m² Connection diameter: 300 mm Switch zweistuftig Compact construction, space-saving Powerful, high suction power,. low operating costs Easy maintenance, long filter life Universally applicable, variable accessories High flexibility Mobile design Suction technology with front plate system G & ALKO 19562801
used
Balzers BAK 1050 evaporation chamber as seen in the photos. For technical questions, I would like to ask.
used
under electricity information on request; ready for immediate use
used
Machine type TIG inverter welding system water-cooled DC and AC system Make Merkle Type Insquare 250 W Plant No. 22,351 Connection voltage 3 x 400 volts Setting range 5 - 250 amperes Switch-on time 60% ED at 250 amperes 100% ED at 200 amperes Current setting infinitely variable maximum weldable material thickness steel / VA = 6 mm Aluminum = 4 mm Cooling inverter by built-in fan Cooling burner water-cooled Execution of mobile industrial plant Hedging 16 Ampere Dimensions L x W x H 955 x 515 x 945 mm Weight 120 kg Age approx. 20 years Condition workshop-tested very well incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG burner WHW 20/Z, 4 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure meters 1 pair of TIG gloves 1 piece spare part box cpl. Equipped ...
used
Sprueh cleaning system for small to medium batches, for workshop, maintenance or interim cleaning, cleaning with hot water, spruehkabine as top - loader abhaenging of model: basket diameter 820 - 1250 mm, load capacity 80 - 300 kg, spruehdruck 1.8 - 3.5 bar, heating 4.5 - 12 kW, optional: thermostat 0 - 90,Timer, oelskimmer, filtration, be- and unloading trolley; optional: thermostat 0 - 90,timer, oelskimmer, filtration, be- and unloading trolley; New
used
Ultrasonic cleaning systems, washing systems as single or multi-chamber systems, with or without handling system, can be realized in various standard size, special needs can be realized
used
Centrifugal grinding machine / sliding grinding machine for deburring, rounding, polishing of factory troughs. Machines with 18, 60 or 160 litre capacity. Machines incl. dosing pump, speed control and control cabinet - separian unit optional. Detailed offer on request;; New
used
Tunnel washing systems / cleaning systems with foerder belt, roller conveyor or lifting converter, with the functions pre-cleaning, cleaning, sprouts, drying etc. The tunnel cleaning systems can be tailored precisely to the respective customer requirements
used
Bitzer composite system with 3 compressors Bitzer Type 4-H15.2Y with control box
used
We offer you used filling technology from all over Europe. We have constant access to filling lines for glass bottles, PET bottles or FE cans. Either we can offer you complete filling lines, or individual modules to expand or upgrad your previous line. Due to the fact that we have constant access to hundreds of individual components, we can also put together your desired filling individually. In addition to the components and complete systems, we also keep the complete peripherals such as unpackers, packers, loaders, palletizers, conveyors, lifting tables, distributors, turning stations, chain conveyors, labeling machines, pasters, coolers, Impregnating, mixers, compressors, blowmachines, carton erpers, cardboard sealers, shrink tunnels, winders, packers, carrying handle machines, uncorkers or block technology for you. Contact us and just tell us your destination: Is it a ...
used
Plasma cutting system / power source Manufacturer: Kjellberg Type: PA-S47 CNC Year of construction: 1994 Cutting power: 40-130 A Quality section: 35 mm Cut: 45 mm Gas console: PV-S75W-1 without hose package .
used
Properties The manufacturer's scarce discharger Drive: Pneumatic Condition: fully functional with traces of use Colour: black Material: Steel Expertly disassembled and packed Price per piece Total quantity in stock: 6 PCs. Technical data Total width: 530 mm Height: 580mm Boom length: 590mm The Assembly traverse length: 430 mm Hub depth: 400 mm Wide pusher: 400 mm Tailor-made solutions We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.
used
with membrane conveying
used
Esab CXD 3000 P Working range: 14000 x 2500 mm 2006 completely overhauled , new control system, new plasma system installed. 1x Plasma Plasmaarc 200 Cutting up to 40mm Burning table 2 x 6m inclusive Without burning tables , without filter system assembly and commissioning on request; ready for use
used
-System: Used Westfalia Separator as semi-mobile dewatering unit Manufacturer: Westfalia Model: full coat screw centrifuge Design: as a semi-mobile dewatering unit Type: CF 7000 / UCF 646-00-35 Power: 110 kW Year of construction: 2012 Screw drive: 30 kW, IP54, 50 Hz -Accessories: inlet pipe for the feeding of sludge -Decanter connectors: solids discharge chute 1.4301, Central chute, including sample tap 1.4301 -Sludge feeding: rotary piston pump Börger CL520 Flow rate: 50-120 m3/h Power: 11 kW -Mud meter: ABB, COPA XE, DN 100 -Solvents - and dosing station: fully automatically to the release of liquid products Designed for a dose of: 35 kg FHM/h Make: P + P -Eccentric screw pump: to promote the use solution over the subsequent dilution station to the decanter Make: Netzsch, 2-8 m3/h Power: 1.5 kW FU: included in the control -After dilution station: to the Hrabsetzun ...
Slow runner with sliding floor 800 mm rotor width 11 kw motor good condition
used
Laser marking laser marking system, Manufacturer GSI Lumonics Type XYMark, consisting of laser and suction. Geraet untested More information on request Special price
used
Built: 1998 Dimensions: 1.15 m x 0.8 m x 2.5 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Umluf fan: 8,000 m3/h; 4.0 kW; 1435 rpm Location : Warehouse Room Herzogenaurach Sales price: € 2,990,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.
used
Year of construction : 1983 / 2003 Oven and burner renewed Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air fan: 8,000 m3/h; 4.0 kW; 1500 rpm Location : Camp Herzogenaurach Sales price: € 2,900,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.
used
Manufacturer: Expert Systemtechnik GmbH Make: cutEXPERT Type: Variojet year: 2009 Characteristics: Single table with dimensions:Laenge = 6500mm; Width = 3300mm; Height = 1850mmWeight: 1500kg Power consumption: 7.0 kW Cutting head count: 2 Manufacturer: AllfiType: V High Speed high pressure pump :Manufacturer: UhdeType: HP19/37-SYear of construction: 2009 Foerderpower 3.8l/min Design pressure: 4000bar Engine power: 37kW weight: 1450kg ready to use
used
Complete tilt clamping system 2 stueck tipping plates, stud and system covers, stoppers, pads, clamping strips, hoehenbloecke and much more. Length by width 2 piece 500400mm Holes 16mm Number of holes xxx stueck Distance of holes 50mm More data and photos on request Price and further information on request Special price
used
Manufacturer Ruefli AG SA Biel - Bienne Very powerful exhauster, suction system Spaene suction with filter bag for woodworking machines, Power 2.2kw 2850rpm. machine probably unused except for advance guidance. Special price
used
Unused. New.
used
Mobile press system with belt or packing press - can be varied by hourly performance More detailed information on request!; New machine - best condition
used
Machine type TIG inverter welding system water-cooled DC system Make Merkle Type TIG 300 DC W Plant No. 85.186 Connection voltage 3 x 400 volts Adjustment range 5 - 300 amperes Switch-on time 50% ED at 300 amperes 60% ED at 280 amperes 100% ED at 220 amperes Current adjustment infinitely variable max. weldable material thickness 8 mm Cooling inverter by built-in fan Cooling burner water-cooled Version portable compact system Fuse 16 Ampere Dimensions L x W x H 535 x 230 x 670 mm Weight 40 kg Age 9 years Condition workshop-tested well incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG welding torch 8 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 pair of welder gloves 1 piece user manual Warranty 6 months ...
used
Machine type TIG inverter welding system water-cooled DC system Make Merkle Type TIG 300 DC W Plant No. 85.186 Connection voltage 3 x 400 volts Adjustment range 5 - 300 amperes Switch-on time 50% ED at 300 amperes 60% ED at 280 amperes 100% ED at 220 amperes Current adjustment infinitely variable max. weldable material thickness 8 mm Cooling inverter by built-in fan Cooling burner water-cooled Version of mobile compact system Fuse 16 Ampere Special accessories trolley Dimensions L x W x H 535 x 230 x 670 mm Weight 40 kg Age 9 years Condition workshop-tested well incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG welding torch 8 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 pair of welder gloves 1 piece ...
used
A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water precoth 3 bar or slightly higher Residual -0.2 less than 0.1 ppm for a water temperature of 12°C with 1 APV centrifugal pump with 15 KW with 1 vacuum pump, manufacturer Travini Italy, 11 KW with CO2 dosing via needle valve with level control of the entry and exit Water 1 control cabinet on 2 feet standing with Siemens switchgear equipment Dimensions of the system: 2,900 x 1600 x 3200 mm Weight of the plant 950 kg A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water pre-pressure 3 bar or slightly higher residue -0.2 less than 0. ...
used
Stainless steel containment system Glovebox with insulators with scale and discharge screw for industry, pharmaceuticals, manufacturing and laboratory used , as good as new condition Manufacturer: Hecht Anlagenbau Type: 7.178710 Y.O.M.: 2008 / Nr.: 201040 Material: Stainless steel Test room area approx. 900 x 900 mm Front flap approx. 850 x 650 mm Servive flap on the side approx. 700 x 580 mm for the safe emptying of packaging, sack containers in the Pack Off system for pharmaceutical and chemical products to avoid contermination the containment system can be opened from 3 pages and has an eceleration in a connection on the side of approx. 350 mm Outlet at the bottom approx. 500 mm Opening rear approx. 100 mm Discharge screw with pneumatic valve Screw length approx. 1500 mm Screws approx. 110 mm Screw drive Siemens Z48-KQ - 1.7 L oil; 3000/113 rpm 4x Load cells "Fli ...
used
Qty. 1 Second-hand blower and PET filling line Mfc.: SIG (Germany), KHS (Germany), Robopack (Italy) Built: 2006 / 2007 Stopped: 10 / 2020 Product: Beer Cap type: PCO 1881 Technical Data 1. Blowing machine Mfct.: SIG Type: Blomax 6 Year: 2007 Cap Type: PCO 1881 PLC type: ABB controller Consisting of: Blowing machine pre-form feeder (without tipper) chiller (Mfct.: Riedel, 2007) Capacity: at 2 litres: 8,400 bottles / h at 1.5 litres: 10,500 bottles / h at 1 litre: 10,500 bottles / h 2. Filler Mfct.: KHS Type: INNOFIL EM/125/R/PET 54 / 9 / Rinser 36W Year: 2007 Total working hours: 90,000 Product: Beer Cap type: PCO 1881 Consisting of: Rinser, Filler, Capper (incl. cap feeding system) Cap feeding system: Mfct.: Hormes, Year: 2007 3. Cleaning system / CIP station Mfct: KHS Type: Innopro – CIP Year: 2007 Consisting of: Stainless steel tan ...
used
see pdf attached
used
see pdf attached
used
The cable granulating system RMH 1 d grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating. Â When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly ...
used
The cable granulating system RMH 2D grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating. Â When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly ...
used
Extraction system L x W x H: 2450 x 1340, + distance pipe incl. engine 1400 x 2900 mm Built in 1988 Weight approx. 400 kg The system can be screwed apart. Disassembly by buyer. The system is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
used
used
used
used
used
used
used
used