133,930 used machines on RESALE, but how to find them? Machine Search
Key data: 315 t, 310 mm, 250 mm
Condition used Press capacity 315 t Stroke 250 mm Daylight 310 mm Table size (left to right) 320 mm Table size (front to back) 385 mm Table height 1250 mm Speed at max. press force 7.5 mm/sec Pressure speed at f max. 0.3 mm/sec Return speed 24 mm/sec Oil quantity 390 l Driving power 380 V/ 50 Hz/ 2.2 kW Dimensions 1950 x 800 x 2000 mm Height of machine above floor 2000 mm Total weight 2.4 t Mode of operation oil hydraulic Calibrating presses Description Contact the seller for more information Interested in this machine?
Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widax, face milling cutter head diameter 315 mm -Cutter head: Widia type WIDAX M45 Ø 315 R 16 -Number of teeth: 16 -Hole: Ø 60 mm -Dimensions: Ø 335 x 78 mm -Weight: 38.5 kg
A transfer press line is offered, consisting of a Gräbener double-column transfer press including a feed unit and a Fecker decoiler-straightener combination with strip feed. 1) Gräbener GSET 2-250-280-315 double-column transfer press, year of manufacture: 1997, condition: operational, nominal force: 2500kN, nominal force stroke: 5mm, nominal energy capacity: 45kJ, slide stroke: 315mm, max. stroke rate: 50strokes/min, slide adjustment: 125mm, number of connecting rods: 2, shut height between bolster and slide: 800mm, bolster dimensions X/Y/Z: 2800mm/1150mm/200mm, slide area X/Y: 2800mm/900mm, max. die cushion stroke: 160mm, die cushion force: 88kN, machine dimensions X/Y/Z: approx. 5200mm/2700mm/5450mm, dimensions including sound enclosure X/Y/Z: approx. 7200mm/4700mm/5610mm, weight: approx. 55000kg. 2) Feed unit, condition: partially operational. 3) Fecker decoiler-straightener combina ...
Card gluing unit for MM saddle stitchers, Make Müller Martini, Model 315.0402, Year 1990? 1995?, Min. size 40 x 60, Max size 250 x 350 mm, Stitches 1-5, Details interface changed to modern touchscreen, Nordson I5542423 hotmelt kettle with heated hose and glue appliance head, Available direct
turning diameter: max. 480 mm turning length: max. 2.000 mm control: Sinumerik 840 D Siemens swing diameter max. over bed cover: 520 mm Main spindle:: turning speed range - main spindle: 7 - 2.800 min/-1 transmission ratio: 2 power capacity - main spindel: 53 kW max. Torque: 3.456 Nm spindle nose: 11 DIN 55026 chuck diameter: 315 mm spindle bore: 103 mm usable bar diameter: 82 mm axis stroke:: x-travel: 405 mm z-travel: 2.049 mm Tailstock:: diameter of quill: 100 mm quill stroke: 100 mm tension force: 14 kN capture: 30 DIN 2079 feeds:: rapid traverse: 10 m/min Working speed: 0,1 - 10.000 mm/min feed power: 15 kN Tool Mount:: number of toolpositions: 12 pos. driven statition: 6 pos. Shank diameter: 50 mm power capacity: 5,4 kW Max. Speed: 2.500 / 625 min/-1 max. Torque: 25 / 100 Nm total power requirement: ca. 50 kW weight of the machine ca.: 14 t dimensions of the machine ca.: 6,4 x ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 4700 € : 315 mm : 315x32x63 mm : 45 / 90 U/Min : 45 ° : 45 ° : rund 105 mm / quadratisch : rund 90 mm / quadratisch : rund 90 mm / quadratisch : 1,3 - 1,8 kW : 600 mm : 1000 mm : 1400 mm : 200 kg Manual vice Robust double joint pivot Low-voltage start/stop switch in the handle 45-degree left and 45-degree right mitre cuts Split vice (clamps before and after the sawblade) Sawblade not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 5100 € : 98.43 € : 315 mm : 315x32x63 mm : 45 / 90 U/Min : rund 105 mm / quadratisch : rund 90 mm / quadratisch : 4.7 kW : 600 mm : 1000 mm : 1400 mm : 200 kg Pneumatic vice Low-voltage start/stop switch in the handle 45-degree left and 45-degree right mitre cuts Split visc (clamps before and after the sawblade) Self-centering visc for optimal cutting position Large base frame for high stability Sawblade not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 315 t stroke: 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Built in 1995 1 card glue 315 Robatech Nozzle Glue Plant Hotmelt Glue Plant Delivery date: immediately from stock
Key data: 160 KW, 1480 1/min
Manufacturer : VEM Model : K21R 315 MX4 Power: 160kw Connection: 400 V Revolutions: 1480 rpm Weight: approx. 1000kg with connection cable NEW, orig. packaging, unused from stock
Manufacturer: BOEHRINGER Model: VDF 315 CM Machine Type: Horizontal Lathe Application Type: Turning Year: 1997 Control Unit: • Control Brand: SIEMENS • Control Model: 840C Movement: • Number of Axes: 3 • X-Axis Travel: 405 mm • Z-Axis Travel: 2,049 mm Technical Specifications: • Sub Spindle: No • Live Tooling: Yes • Maximum Bar Capacity: 80 mm Additional Information: • Chuck Diameter: 400 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines
x-travel:500 mm y-travel:400 mm z-travel:340 mm work table::800 x 400 mm control:Numerik CNC - H 646 spindle turning speed - stepless:20 - 3000 U/min total power requirement:14 kW weight of the machine ca.:2400 kg dimensions of the machine ca.:2100 x 1800 x 2400 mm
internal diameter:315 mm grinding depth:315 mm swing diameter:420 mm number of spindle speeds:32 - 360 U-min wheel box:-drehzahl 100 - 8000 U/min face diameter:500 mm total power requirement:12 kW weight of the machine ca.:5900 kg dimensions of the machine ca.:3400 x 1750 x 2000 mm
Pressure:315 t distance between columns:1350 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1000 mm table surface area:1200 x 1300 mm table height over floor:1245 mm side window:1250 mm ram surface:1200 x 1300 mm speed down:750 mm/s speed up:680 mm/s working speed:180 mm/s oil volume:2000 l power requirement:150,0 kW weight:35,0 t Dimensions (WxDxH):3,3 x 3,3 x 5,5 m height over floor:5,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact cushioning:motorisch verstellbar ram interlocking:hydraulisch
nominal force:315 t stroke:300 mm no. of strokes:36 /min distance between columns:540 mm distance table/ram, max. stroke up, adjustment up:750 mm table surface area:530 x 630 mm blow die to die:630 t Allowed max. force:500 t ram surface:450 x 560 mm spindle diameter:180 mm power capacity:18,0 kW weight:13,0 t Dimensions (WxDxH):2,5 x 2,0 x 4,0 m
pressure:315 t distance between columns:1620 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1000 mm table surface area:1600 x 1100 mm pressure of drawing cushion in ram:20 t stroke of drawing cushion in ram:100 mm drawing cushion area in ram:300 x 300 mm side window:600 x 1100 mm table height over floor:750 mm ram surface:1600 x 1100 mm oil volume:1500 l power requirement:110,0 kW weight:35,0 t dimensions (WxDxH):4,65 x 2,61 x 5,5 m height over floor:5,05 m height beneath floor:0,45 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in ram:hydraulic ram interlocking:pneumatic cutting impact cushioning:hydraulic
pressure:100 t throat:315 mm stroke:30 - 160 mm no. of strokes:40 /min distance table/ram, max. stroke up, adjustment up:460 mm table surface area:910 x 680 mm Hole in the table:400 mm table height over floor:800 mm passage to the back:400 mm ram surface:630 x 400 mm ram adjustment:80 mm power requirement:7,5 kW weight:7,5 t dimensions (WxDxH):1,7 x 2,0 x 3,0 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical ram counterbalance:pneumatic
pressure:315 t throat:480 mm stroke:20 - 190 mm no. of strokes:36 + 45 /min distance table/ram, max. stroke up, adjustment up:615 mm table surface area:1400 x 880 mm hole in the table:250 mm table height over floor:800 mm passage to the back:950 mm ram surface:850 x 630 mm ram adjustment:125 mm power requirement:33,0 kW weight:30,0 t dimensions (WxDxH):2,0 x 3,0 x 4,4 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:pneumatic overload protection in ram:hydraulic stroke adjustment:semi-automatic ram adjustment:motoric ram counterbalance:pneumatic
pressure:315 t distance between columns:1750 mm stroke:700 mm distance table/ram, max. stroke up, adjustment up:1200 mm table surface area:1600 x 1500 mm pressure of drawing cushion in table:125 t stroke of drawing cushion in table:200 mm die cushion area:1200 x 1400 mm table height over floor:750 mm ram surface:1640 x 1500 mm power requirement:55,0 + 11,0 kW weight:29,5 t dimensions (WxDxH):3,2 x 4,5 x 5,8 m Height above floor:5,1 m German Safety: permitted for manual loading:CE-Norm - EN 692, BGR 500 drawing cushion in table:hydraulisch cutting impact absorption:hydraulic
pressure:315 t distance between columns:1800 mm stroke:400 mm Distance table/ram, max. stroke up, adjustment up:650 mm table surface area:1800 x 1000 mm table height over floor:900 mm die cushion pressure in table:80 t die cushion stroke in table:100 mm Die cushion area in table:1300 x 600 mm side window:600 mm ram surface:1800 x 1000 mm speed down:400 mm/s speed up:300 mm/s working speed:15 - 80 mm/s oil volume:1700 l power requirement:55,0 kW weight:27,5 t dimensions (WxDxH):3,1 x 2,2 x 4,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 die cushion in table:hydraulic foundation pit:not necessary
pressure:315 t distance between columns:1290 mm stroke:700 mm distance table/ram, max. stroke up, adjustment up:950 mm table surface area:1250 x 1100 mm pressure of drawing cushion in table:125 t stroke of drawing cushion in table:300 mm die cushion area:900 x 900 mm Capacity of ejector in ram:20 t Stroke of ejector in ram:250 mm table height over floor:800 mm ram surface:1250 x 1100 mm oil volume:1200 l power requirement:40,0 kW weight:22,0 t dimensions (WxDxH):2,6 x 1,6 x 5,2 m height over floor:4,05 m drawing cushion in table:hydraulic ejector in ram:hydraulic cutting impact cushioning:hydraulic
pressure:315 t distance between columns:2350 mm distance table/ram, max. stroke up, adjustment up:1200 mm distance between cutting impact cushioning:1600 mm Distance table/ram, stroke up:1200 mm stroke:800 mm table surface area:2060 x 1260 mm table height over floor:750 mm Die cushion pressure in table:100 t Die cushion stroke in table:400 mm die cushion area:1250 x 1000 mm side window:780 mm ram surface:2200 x 1500 mm Capacity of ejector in ram:63 t speed down:500 mm/s speed up:310 / 410 mm/s working speed:20 - 73 mm/s quantity of oil:3900 l power requirement:80,0 + 45,0 kW weight:55,0 t Dimensions (WxDxH):4,6 x 2,7 x 7,2 m Height above floor:6,0 m Height below floor:1,2 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 die cushion in table:hydraulic ejector in ram:hydraulic ram interlocking:hydraulic cutting impact absorption:hydraulic
Machine type: Forklift / Forklift Manufacturer: Still Model: R33 Built: between 75 and 80 Condition: ready for use (used) Price 7,450 net plus VAT Location Warstein, Germany Reference M-STI-0121 Description We offer you a used forklift from the manufacturer Still Technical data: Capacity: 6t Weight: approx. 9t Engine hours: 9986h Width: approx: 2250mm Fork length 2000mm Tine adjuster max 2100mm tine outside Lighting: Headlights and Rear Lights UVV Test: 01/2022 Mercedes Motor The forklift is in use with us, jumps immediately in any weather. No electronics. Operating hours may still vary, as the forklift is in use. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a ...
GRONINGER LIQUID FILLING LINE FILLING AND CLOSING MACHINE DFVK 6000 - STOPPERING MACHINE KVK 108B Anno di costruzione: 2002 Output: 12,000 per hour (200 per min), based on 3ml vial, 1ml fill Filling range: 0,2 ml- 135 ml (equipped with according pumps) Diameter range: 14-35 mm Height: 30-100 mm PLC: Siemens PLC type S7 300 Guarding: Stainless steel frame with safety glass The vial filling and closing line is capable of running in the following ways: - Fill and half-stopper a batch for freeze-drying - Overseal a stoppered batch from after freeze drying process - Fill, stopper and overseal a liquid batch Line under ORABS - Open Restricted Access Barrier System. Full set of operation manuals and technical documentation. Various spare parts.
Manufacturer: Elektronickarte DFD11B, Serial number: 0224906, Systemconfiguration: 08249725, Serial number: 0224906,
Axial piston pump, E A10VSO 45 DFLR/31R-PPA12N00, Brüninghaus, mint condition Please note: This is an original Brüninghaus product and not a replica from Special offer! If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new! The part comes from the spare parts warehouse of a certified manufacturing company, has been in storage for a long time, shows very few signs of storage, has never been used and is in mint condition. Axial piston pump, E A10VSO 45 DFLR/31R-PPA12N00, Brüninghaus, as good as new Drive shaft D25mm, 1450 rpm, DR 250 bar, 41 cm³ 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is ...
Axial piston pump, E A10VSO 18 DFR1/31R-PPA12N00, Brüninghaus, mint condition Attention: This is an original Brüninghaus product and not a replica from Special price If you have a VAT number, we will gladly issue you an invoice without VAT. New! The part was purchased from a company's spare parts warehouse, had been in storage for a long time, had never been used and is completely new. Axial piston pump, E A10VSO 18 DFR1/31R-PPA12N00, Original! Brüninghaus, neu Dr=140 bar, 1500 rpm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and condition ...
Axial piston pump, E A10VSO 71 DFR/31R-PPA12N00, Rexroth, used Please note: This is an original Rexroth product and not a replica from Special offer! If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! The part comes from the spare parts warehouse of a certified production company and is in very good condition. DR 200 bar, 71cm³, 1500rpm, Drive shaft D32mm Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital compon ...
GRONINGER PFS DFVN1000 FILLING MACHINE Filling and stoppering machine for presterilized disposable syringes. Can be used for testing sizes and small batches of products. For laboratories, test series and small batches. Machine built in 2009. CHARACTERISTICS - 2 rotary piston pumps with 2 filling needles. Gassing during filling and stoppering - Filling via rotary piston pump, peristaltic pump, time pressure, or in combination PRODUCTION - Output: 4.800 syringes/hr (max) - Syringe diameter: 8,15 mm (with stoppers) - Dosing range: 0,2 ml – 1,5 ml ENERGY - Electricity: 220/380 V, 50 Hz, 3 Ph+N+PE - Power consumption: 7 KVA (approx) DIMENSIONS - Footprint: 1500 ｘ 1135 ｘ 2000 mm (ca)
4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Condition: hydraulic power chuck unused -Tensioning force: max 20 KN -Equipment: with soft interchangeable jaws -Chuck size: Ø 210 mm -Weight: 30.9 kg
Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Manufacturer: Festo, Guide cylinder type DFM-25-50-PA-GF -Piston: Ø 25 mm -Stroke: 50 mm -Max. pressure: 10 bar -Number: 4x cylinders available -Price: per piece -Dimensions: 135/95/H45 mm -Weight: 1.6 kg
Forklift front forklift in very good condition Manufacturer Jungheinrich Year of construction 2011 Payload 3.000kg Operating hours approx. 4,200 hours Triplex mast with full free lift Lifting height approx. 5m Three valves up to the mast Side shifters Own weight approx. 4,73to Height approx. 2250mm Total width approx. 1.300mm Turning radius approx. 2.37mm All information to the best of our knowledge, but without guarantee!
Oil filter system, oil cleaning system, oil transfer system, hydraulic unit, hydraulic pump, hydraulic pump, hydraulic test pump -Operating pressure: max. 420 bar -Dimensions: 140/68/H245 mm -Weight: 2.3 kg
Filling machine for filling and closing liquids in corresponding bottles. Dosing volume: approx. 50-500 ml. 4-digit machine incl. 6 format parts, infeed turntable, Johnson pump, spare parts etc.
Three-phase motor, electric motor -Power: 1.8 kW -Speed: 1420 I/min -Shaft: Ø 20 x 50 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 345/249/H260 mm -Weight: 28 kg
Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 22.5 rpm -Performance: TA = 120 Ncm -Shaft: Ø 30 x 105 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 350/290/H195 mm -Weight: 22 kg
Filling machine for PFS and Cartridges in nest; for testing and small batches. Dimensions: 1,500ｘ 1,135ｘ 2,000 mm Max. Output: 4.800/hr Filling volume: 0.5 - 50 ml Supported package: 20/30/42/64/100/160 nest Filling system: Rotary piston pump, peristaltic pump, time pressure, or in combination. DFVN 1000 series is the smallest filling and stoppering machine by Groninger. Designed as a filling and closing machine for presterilized disposable syringes in nest for laboratories, test series and small batches. This semi-automated stoppering and filling machine offers processes identical to those of a high-output system. The machine supports manual nest handling under laminar flow. Clear separation between the manual handling section and the fully automatic production section.
Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Type: DFM-63-80-B-PPV-A-GF -Piston: Ø 63 mm -Stroke: 80 mm -pneumatic: cushioning -both sides: adjustable -Gliding guide -Weight: 7.34 kg
Three-phase motor, electric motor -Power: 0.25 kW -Speed: 1380 rpm -Shaft: Ø 14 mm -Design: B5 -Protection class: IP 44 -Dimensions: 295/205/H160 mm -Weight: 11 kg
Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1360 rpm -Shaft diameter: 19 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 290/160/H200 mm -Weight: 9.6 kg
Key data: 18 KW, 13 1/min
Infinitely adjustable variator motor with belt variator
Gear motor, electric motor, electric gear motor -Speed: 7.5 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: 50 mm -Protection class: IP 55 -Brake: 24 V -Dimensions: 820/320/320 mm -Weight: 100 kg
Gear motor, electric motor, electric gear motor -Speed: 24 rpm -Power: 0.55 kW -Construction: hollow shaft -Diameter hollow shaft: 27 mm hexagon -Protection class: IP 44 -Dimensions: 510/200/H190 mm -Weight: 15.7 kg
Electric motor, luminous flux motor -Power: 1.1 kW -Speed: 2820 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: IP 33 -Dimensions: 340/160/H220 mm -Weight: 15 kg
Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1350 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: IP44/55 -Dimensions: 360/160/H215 mm -Weight: 15 kg
Gear motor, electric motor -Speed: 89 rpm -Power: 1.1 kW -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 500/250/H210 mm -Weight: 35 kg
Gear motor, electric motor, electric gear motor -Speed: 16 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: 30 mm -Protection class: IP 54 -Weight: 29 kg
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 54 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Brake -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Weight: 19.5 kg
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 73 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Brake -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Weight: 18.5 kg
maximum number of results exceeded
please refine your search
