135,208 used machines on RESALE, but how to find them? Machine Search
Mill, Use Machine Type : B 315 U Manufacturer : Alpine Material : Mild steel
Weibert FKK 315-2000E Sliding table saw Trimming length 2000 mm Saw blade diameter 315 mm Cutting height 100/80mm Cutting width with stop 1220 mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 3 kW 400 V Weight approx. 260 kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900317
Fine impact mill B 315 with 15 kW motor, newly mounted
faceplate diameter: 315 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 pc. faceplate - diameter 315 mm bore 75 mm fastening: Camlock - 4 Pcs. 173 M 16 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 315 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 0,1 m bore 75 mm KK 140 4 pcs. fastening screws 173 / M 6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MACC Metal Circular Saw NEW 315 E HSS Circular Saw Blade 315 mm Section cap. up to 100 mm round Coolant pump Attack Speeds 40/80 rpm Motor 2-stage 400 V Weight approx. 170 kg Machine base can be purchased
MACC Metal Circular Saw TRS 315 HSS Circular Saw Blade Diameter 315 mm Double vise, Opening up to 120 mm, Quick release defective mitre cuts left/right up to 45° 2 speeds
Standard equipment: With swivel head (left/right) for mitre cuts, two speeds, Stable cast construction of the machine housing, Oil bath reduction gears, consisting of bronze wheel and hardened, ground steel screw. Quick-release vise with Counterclamping device for double workpiece clamping. Long-lasting, mechanical coolant pump Adjustable length stop Operating tool Machine colour: RAL 7037 Specifications KS 315 M Motor three-phase current 400 V, Pole switchable (kW) 1.3/1.9 Vise Span(mm) 110 Cooling tank capacity (l) 5 Working height with base frame (mm) 980 2 speeds (rpm) 41/82 Machine Dimension with base frame (mm) 1,000 x 1,100 x 1,800 Machine Dimension 12-month warranty for single-shift operation Not included: Saw blade (mm) Ø 315 x 32 Steel base frame
FSA Combined MIG/MMA Welding Machine MIG Shielded Gas Welding 30 - 315 A MMA Electrode Welding 10 - 200 A MIG burner hose 2 m Mass clamp 3 m Reducer Electrode holder Weight approx. 40 kg
Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Throughout: Ø 105 mm -Pole circle: Ø 235 mm / M20 -Take: short taper 11 -Weight: 56 kg
Clamping devices, clamping brackets, clamping clamps, clamping brackets, pipe clamping brackets, pipe clamps, pipe clamps -Pipe clamp: Pipe clamp with quick-release fastener -Clamping range: Ø 302 to 315 mm -Number: 5x clamps available -Price per piece -Dimensions: 325/95/H435 mm -Weight: 5.1kg/pcs
used
Offer 24455 Specifications: - Saw feed via hand lever - Saw blade diameter 315 mm - Largest opening width vice approx. 160 mm - Cutting range approx. at 90° around 100 mm - Flat up to 135 x 80 mm - Cutting range Li + RE at 45° around 108 mm - Flat up to 100 x 80 mm - Cutting range Li at 60° around 80 mm - Flat up to 70 x 80 mm - Cutting speeds approx. 33 + 66 rpm - Drive 400 V / 1.3 / 1.8 kW - Coolant device - Space requirement approx. W 950 x H 1600 x D 950 mm - Weight approx. 270 kg
Elektro Gabelstapler / Eletric Forklift Manitou ME 315 Baujahr / Year 2017 - Serial-No. 3-Rad-Gabelstapler / 3-wheel Fork Lift Tragkraft / forklift lifting capacity max. 1500kg Lastschwerpunkt / center of gravity 500 mm Mit Ladegerät / with Charger Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
hydraulic motor, oil motor, hydraulic pump, hydraulic valve -Manufacturer: Danfoss, hydraulic motor with: valve block -Manufacturer hydraulic motor Danfoss type: OMP 315 151-0033 7 -Valve block: Hawe SK.7356-160/160 -Shaft: Ø 25 x 40 mm -Dimensions: 240/130/H200 mm -Weight: 9.8 kg
PLC controller, central assembly, working memory, CPU, central unit, central processing unit, compact unit, compact CPU -Manufacturer: Siemens, Central processing unit CPU 315-2 Simatic S7-300 -Type: 6ES7 315-2AF03-0AB0 -Quantity: 1 module available -Dimensions: 120/80/H125 mm -Weight: 0.5 kg
Kartenkleber für Sammelhefter - Card Gluer for Saddle Stitcher Mueller Martini 315 Type C 422 Year 1996 - Serial-No. 99.12964 C 422 Robatech Gluning unit - 1 gluing noise Card Gluer for Saddle Stitcher Mueller Martini 300-321-335 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø22/25 x 215 mm -Dimensions: 315/65/H85 mm -Weight: 1.9 kg
Punching tool, punch, scraper, hold-down device -Handover: in current condition as seen -Bracket: Damage see photos -Scraper: hold-down device for punching -Receptacle: Ø26/22 x 210 mm -Dimensions: 315/125/H95 mm -Weight: 4.2 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece top jaw set, unstepped -Type: FWB 315/425 -Width: 36mm -Bore: Ø 13 mm -Total dimensions: 145/110/H62 mm -Total weight: 6.3 kg
Clamping table, clamping angle, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Round table with three-jaw chuck -Chuck size: Ø 315 mm -Spindle bore: Ø 103/28 mm -Dimensions: 460/270/H410 mm -Weight: 123 kg
pressure: 63 t throat: 315 mm stroke: 8-100 mm no. of strokes: 140 Hub/min ram - range of adjustment: 63 mm table surface area: 1200x630 mm ram surface: 800x315 mm hole in the table: Ø 110 mm table height: 820 mm tool hole in ram: Ø 50 mm dayligth: 335 mm total power requirement: 7,5 kW weight of the machine ca.: 5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
4-column punching tool, separating tool, punching tool, punch, punching die, punching stamp -Punching tool: 4 column punching tool long hole 10 x 7.5 mm -Punching dimensions: see photo with dimensions -Dimensions: 800/315/H320 mm -Weight: 120 kg
V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 6-groove pulley type SPB 315 x 6 -V-belt width: 17 mm -Mounting: Taper bushing Ø 75 mm (can be changed) -Dimensions: Ø 320 x 120 mm -Weight: 28 kg
tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK40 holder 2 pieces -Type: 40 x 27 x 315mm / 40 x 27 x 400mm -Shaft: Ø 27 mm -Price/Delivery: complete -Transport dimensions: 595/130/H70 mm -Weight: 10.5 kg/total
Rotary hub drive, center turning device -Outer diameter: 315 -Cone: Ø 105 mm -Bolt circle: Ø 135 mm -Weight: 20 kg
Power converter, current inverter, current transformer, drive inverter, controller -Perfomance: -Input: 380/415 V -Output: 460 V DC Serial No.: 05603 Price: per piece -Weight: 7.5 kg
two-arm drill, rotary drill, magnetic drill -Recording: MK1 -Nominal power input: 400 W -Connection: 230 volts -Max. drill bit diameter: 15 mm -Weight: 7 kg
Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 315 mm -Interchangeable jaws: soft -Short taper mount: Ø 135 mm -Bolt circle: 172 mm -Weight: 90 kg
cutting diameter: 315 mm dimensions of saw-band: 3460 x 1,1 x 34 mm cutting speed: 35 / 70 m/min cutting width: 400 x 250 mm : 250 / 280 mm Impact energy: 220 / 280 mm : 180 mm : 140 mm connected load frequency: 400 Volt total power requirement: 2,2 kW weight of the machine ca.: 0,6 t dimensions: 2,1 x 1,0 x 1,5 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
From a current recycling we offer you a New Holland T 7.315 AC. Year of Make: 2021 Registration date: 08.08.2022 Condition: used RDh: 2,328.8 Asking price: 130.000,00 € VB Original price: 235.000,00 € Equipment / accessories / other information (accuracy and completeness without guarantee): Viscotronic Fan & Motor Level 5 200 A alternator Main and auxiliary fuel tank without tank protection Auto Command transmission 50 km/h ECO Parking brake Sprung front axle with brake High-performance brake discs Thru axle 98" 650/60R34 Adjustable Wheels 710/75R42 Fixed Wheels Rear wheel weights 500 kg (2x 250 kg) Preparation of the guidance system Variable Steering Ratio Custom Steer Pressurized air procurement system ITBS Intelligent Trailer Braking System Battery main switch electrical Radar sensor Telemetry Modem 159 cc Standard Air Compressor External compresse ...
saw blade diameter: 315 mm capacity 90 degrees: round: 108 mm capacity 90 degrees: square: 93 mm : 150 x 90 mm Working height: 920 mm saw blade turning speeds: 17+33 oder 33+66 U/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,36 t dimensions of the machine ca.: 0,8x0,9x1,95 m SPECIAL PRICE! High-performance vertical circular saw VKS 315 HA (20154/20155) • miter left 60° + right 45° • Vice with double clamping arm (fixed 4 times) for low-burr cuts and lateral quick shift • Saw table with large rotating plate and particularly stable vice for optimal material tension • Robust prism guide of the saw head (dovetail guide adjustable) • Automatic cooling • Machine base with chip drawer • Metal handle for high clamping force • Spring package Semi-automatic function: 1. Saw starts 2. Clamp material 3. Rapid lowering to the beginning of the material or c ...
grinding wheel diameter: 315 mm grinding wheel width: 40 no. of working stations: 2 Stück speeds: 1745 U/min voltage: 380 V total power requirement: 1,1 kW weight of the machine ca.: 230 kg dimensions of the machine ca.: 0,85 x 0,45 x 1,05 m S/N: 48817 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 315 mm capacity 90 degrees: round: 108 mm capacity 90 degrees: square: 93 mm : 150 x 90 mm Working height: 920 mm saw blade turning speeds: 17+33 oder 33+66 U/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,328 t dimensions of the machine ca.: 0,8x0,9x1,7 m ACTION PRICE! High-performance vertical circular saw VKS 315 (Article 20150) • miter left 60° + right 45° • Vice with double clamping arm (fixed 4 times) for low-burr cuts and lateral quick shift • Saw table with large rotating plate and particularly stable vice for optimal material tension • Robust prism guide of the saw head (dovetail guide adjustable) • Automatic cooling • Machine base with chip drawer • Metal handle for high clamping force ATTENTION: Price is without saw blade! (saw blade price EUR 109) The data for this ad was created with ModulMWS - the software soluti ...
Zusammentragmaschine / Broschürenfertigung Theisen & Bonitz TB Sprint 315 VP - TB Sprint 303 Booklet Maker / Brochure Finishing Theisen & Bonitz TB Sprint 315 VP - TB Sprint 303 Zusammentragmaschine / Gatherer TB Sprint 310 VP - 15 Stations Feeder Baujahr / Year 1992 Format / Size min. 65 x 100mm Format / Size max. 350 x 500mm Broschürenfertigung / Booklet Maker TB Sprint 303 Baujahr / Year 1992 Heften-Falzen-Schneiden / Stitching-Folding-Trimmer Unit 2 Universalheftköpfen / 2 Stitching heads Hohner 48/5S Kompressor / Compressor Becker Auslage / Delivery
SMG 320 cold forming press for sale. Year of build 1981 Model HPU 315-1300/1150 The machine has a crack in the head piece. Total weight around 43 tons Drive power: 2 x 55 KW Oil volume of one tank filling 3800 liters Maximum ram force: 3200 KN Drive cylinder: 3 pieces Cylinder 1: 2000 KN Cylinders 2+3: 600 KN each maximum adjustment: 310 mm Pressing Force: 315 tons Find more here - .ucymachines/ Contact us at - sales@ucymachines
Reference Num.: 4467 Brand: Theisen Bonitz Type: TB Sprint 315 VP + 303 Construction year: 1995 Available: directly Status: In production Location: Deutschland Equipment: - 15 Stationen - Doppelbogenkontrolle - Fehlbogenkontrolle - Heft-, Falz-, Schneideaggregat Theisen Bonitz
Specifications: - Saw blade dimensions 315 x 2.5 x 32 mm - 2 saw blade spindle speeds approx. 40 + 80 rpm - Cutting range at 90° around 95 mm - flat 110 x 70 mm - at 45° around 90 mm - flat 85 x 70 mm - Mitre adjustable left + right up to 45 ° - Material vise - Drive 400 V / 0.75 / 1.3 kW - Space requirement approx. W 700 x H 1400 x D 700 mm - Weight approx. 200 kg
Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton
Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 315 CM features a maximum turning length of 2,049 mm and a chuck diameter of 400 mm. It is equipped with live tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 315 CM machine we have for sale. Contact us for further details.
Pressure total: 315 ton Ram stroke: 160 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 1.050 mm Free frontal opening L-R: 2.740 mm Free lateral opening F-B: 1.500 mm Distance between oil tray: 2.400 mm Table surface area : 2.740 x 1.800 mm Slide area: 2.400 x 1.700 mm Number of strokes: 10 - 60 s.p.m. Required power: 75,5 kW kW Working hours machine: 77.341 h Height over floor approx.: 5.500 mm Dimensions L x W x H: 5.400 x 3.300 x 5.700 mm Weight of machine approx.: 80 ton Control: Siemens S5
saw blade diameter: NA mm cutting diameter: NA mm stroke: mm working area: 90 mm workpiece dia.: 90 x 500 mm feed:: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 290 mm Number:: 095418 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Marelli Motori AC Generator M7B 315 LD 4 AC synchronous generator from 1995 with 1,360 operating hours. 1 available 400 V/50 Hz – 575 KVA Manufacturer: MarelliMotori Model: M7B 315 LD 4 Type: AC Synchronous Generator Serial Number: MB5883 Power [KVA]: 575 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 830 Speed [1/min]: 1,500 Year of Make: 1995 Hours: 1360 Dimensions LxWxH [cm]: 1.40 x 0.90 x 1.20 Weight [kg]: 1.346
maximum number of results exceeded
please refine your search
