129,235 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
Transport cart, hand truck, Toughsystem, transport trolley -Manufacturer: Dewalt, Tough System tool trolley -Boxes: 2 pieces Dewalt Tough-Box including content see photos -Frame: metal -Dimensions: 550/690/H1100 mm -Weight: 29 kg
Cross-cut saw Dewalt 220 V The machine is in good condition, operational. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12
Distillation plant for WFI water or pure steam generation Manufacturer : DEWA Type: DP 30 EVS Technical specifications : Distillation or pure steam plant this system can be used to produce either distillate or pure steam. Production 30 litres/h Feed water consumption 35 l/h Cooling water consumption system at 95 °C Destwasser 200 l/h electric heating capacity 18 kW max. operating pressure 1.9 bar min. cooling water pressure 1.0 bar min. feed water pressure 1.0 bar min. pressure for control air 6.0 bar Total capacity evaporator approx. 27 litres Evaporator capacity at max. level approx. 11 litres Dimensions: Height 2240 mm Width 970 mm Depth 700 mm Empty weight 300 kg Documents: available
Dewalt Radial arm saw Cutting width 350mm Cutting height 65mm 1.5KW 400V 50HZ Table 800 x 600mm Solid, cast-iron radial arm boom for maximum accuracy and durability with base frame Pull saw double bevel adjustable Hemming cuts also possible G&-5195-M3180
System: Used Westfalia Separator as semi-mobile dewatering unit Manufacturer: Westfalia Model: full coat screw centrifuge Design: as a semi-mobile dewatering unit Type: UCF 646-00-35 Power: 110 kW Screw drive: 30 kW, IP54, 50 Hz -Accessories: inlet pipe for the feeding of sludge -Decanter connectors: solids discharge chute 1.4301, Central chute, including sample tap 1.4301 -Sludge feeding: rotary piston pump Börger CL520 Flow rate: 50-120 m3/h Power: 11 kW -Mud meter: ABB, COPA XE, DN 100 -Solvents - and dosing station: fully automatically to the release of liquid products Designed for a dose of: 35 kg FHM/h Make: P + P -Eccentric screw pump: to promote the use solution over the subsequent dilution station to the decanter Make: Netzsch, 2-8 m3/h Power: 1.5 kW FU: included in the control -After dilution station: to the Hrabsetzung of the root solution to power consump ...
System: Mobile dewatering system on trailer Type: Chamber filter press 500 x 500 Execution: filter press Year of constr.: 2017 refurbished Number of plates: 5 + head and end plate Filter plates: PP Filter cloths: optionally available in voting on the medium Presses contents: approx. 130 dm3 Filter pressure: 15 PSI Material: product-contacting parts flange, traverses stainless steel, PP or rubberized Material: non-product-contacting parts stainless steel Pump technology: In consultation System: The system is delivered as turnkey dewatering equipment ready to plug. Visit: the systems in consultation with us in the work. Other: we deliver the equipment you used ready or refurbished adapted according to your wishes and requirements.
REWA 470 / 27 Product no.: RE-HU-2015-0801-1 Equipment: refurbished dewatering equipment Type: Chamber filter press 470/27 with high pressure piston diaphragm Abel Design: page Holm led Filter plate format: 470 x 470 mm Plate number: 27 Filter plates: PP Thickness: 30 mm Procedure: open Filter cloths: optionally available in voting on the medium Open filter surface: approx. 10.1 m ² Presses contents: approx. 135 dm3 PCB package length: 1600 mm Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: manually Pumps: Abel piston diaphragm high pressure pump Accessories: depending on the type and customer Extra services: On this complex guarantee months between 6-12. Condition: The system is in good condition and is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work. You want to rent this facility or to buy? Contact ...
2014 Conical dewatering press S15-E-EVA-7,5 food grade model. Completely revised. History and documentation available. Elektromotor capacity: 7,5kW.
Sludge Dewatering System Consisting of: 1 Screw Press (see Image I) - Dimensions: 2500 x 1500 x 2100 - Weight: 1 t. 1 Flocculant Preparation Unit (see Image II + Dimensions) - With agitator, filling system, and level probes - Capacity: 2000 l. Pumps of the Allweiler brand with Variator - 1 Feed Pump: 1.5 – 13.5 m³/h - 1 Dosing Pump: 45 – 275 l/h - 1 Dosing Pump: 150 – 880 l/h Conveying Equipment - 1 Trough Screw Ø 200 x 1370 - 1 Inclined Screw Ø 200 x 4500 Control System - Electrical Cabinet: 800 x 1000 x 300 - Connection Power: 8.8 kW - Separate pressure control - With manometer and regulating valve Output 300 kg/h, consisting of machine, conveyor and dosing pumps, coagulant station 2,000 lt. 2 conveyor screws, + control and all operating instructions. Find more here - / Contact us at -
A screw press for dewatering purposes is available. Screw diameter: 400mm, residual moisture range: 35%-45%, throughput range: 1t-4t/h, weight: approx. 4400kg. Documentation available. An on-site inspection is possible.
A Hiller two-phase centrifuge for solid-liquid separation and dewatering is available. Drum speed: 2700rpm, max. operating speed: 2650rpm, max. feed material density: 1.3kg/dm³, drum inner diameter: 752mm, drum wall thickness: 20mm, drum material: 1.4470, max. operating temperature: 50°C, max. operating pressure: 0bar, motor power: 75kW. Machine dimensions X/Y/Z: approx. 5100mm/2300mm/1750mm, weight: approx. 11600kg. Documentation available. An on-site inspection is possible. Image is an example.
Attachment: Chamber filter press, laboratory press Usage area: Chamber filter press, pilot plant Design: page Holm led Type: XMS150-15 U Filter plate format: 150 x 150 mm Number of plates: 4 + 1/2 head and end plate Filter plates: PP Thickness: 15 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 0.2 m ² Presses contents: approx. dm3 PCB package length: mm Filter pressure: 15 PSI Plate transport: manually Pump technology: included - optional Type: centrifugal pump Type: CHL2-20 Buying or renting: Visit the facilities in consultation with us to work. Condition: demonstration plant, near Mint Photo: a construction-like setting Weight: approx. 70 kg length 70 cm: Width: approx 40 cm Height: With stand + pump approx. 85cm
Warman Pumps Listing 1.Pump Type: 3 / 2 CAH - Year of Manufacture: 2005 2.Pump Type: 3 / 2 CAH - Year of Manufacture: 2005 3.Pump Type: 3 / 2 CAH 4.Pump Type: AH Find more here - / Contact us at -
Manufacturer: Haarsleev Model: Disc Dryer Year of Manufacture: 2019/2020 Decommissioned : December 2024 Drying capacity of up to 50,000 tons of sludge Find more here - / Contact us at -
7.5 liters, 300W, can be used on 230v and/or battery, battery not included. Auction-ID: A1-41275-324
Equipped with 6-Cil. \"Scania\" 500hp Diesel engine ; Self-propelled bunker harvester; Hedgehog band; Steered axle; Central lubrication; Axial-roller cleaner; Auto-depth control; Electr./ Hydr.control; Hydraulic driven wheels; Rubber Tracks Drive; Haulm topper; Open harvesting area; Driven discs; Digging web; Beaters and pushers in mats; Hedgehog band; Axial and flexyclean (bypass); Large bunker; Track undercarriage; Rear wheel with steering angle up to 60 degrees; Rear tire size: 1250/50R32; Track width; approx. 88cm ; Camera system with 12 cameras; Approx. 12 tons of bunker capacity; 1st mat pitch: 50mm; 2nd matt pitch 44mm; 3rd mat pitch 35mm Recently had major maintenance, is ready for the new harvesting season. Auction-ID: A1-40133-1
Unaudited Auction-ID: A7-45427-173
Vacuum well point dewatering filters, In 50mm and 60mm div length sizes., , = More information =, , Year of construction: 2022, , = More information =, , Year of manufacture: 2021, Colour: Yellow, Technical condition: very good, Visual appearance: very good, Damages: none, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to visit us? Yes, please!, , Our doors are open Monday through Friday from 7:00 a.m. to 4:00 p.m. On Saturdays, yo ...
Year of manufacture: 2021, Colour: Yellow, Technical condition: very good, Visual appearance: very good, Damages: none, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to visit us? Yes, please!, , Our doors are open Monday through Friday from 7:00 a.m. to 4:00 p.m. On Saturdays, you are welcome by appointment.
The new cold-regenerating adsorption dryer from Parker Zander combines proven and reliable elements of adsorption technology and impresses with a clear concept. Distinctive features of the K-MT adsorption dryer series such as • Adsorber profiles made of one piece • Separately controlled main and blow-out valves in leak-free design • Compact check valve combination, guarantee continuous operational reliability with high availability at the same time All adsorption dryers of the K-MT series have • Self-cleaning sieve trays on the wet side • High-quality desiccants In adsorption, desiccant stores the moisture contained in the compressed air. Parker Zander uses only high-capacity, high-capacity high-capacity molecular sieve type desiccant. This desiccant guarantees a long service life at high inlet temperatures or low pressure dew points. Regeneration takes place ...
Food conveying and processing equipment List of equipment : 1. Dewatering shaker (fabricated in Q4 2020) 2. Weight conveyor belt (fabricated in Q4 2020) 3. Dejuicing shaker (fabricated in Q4 2020) 4. Diagonal shaker (fabricated in Q4 2020) 5. Dryer feeding shaker (fabricated in Q4 2020) 6. Incline belt elevator (fabricated in 2021) 1. DEWATERING SHAKER Dimensions: Length: 3.300 mm Width: 900 mm Features: Fully built in stainless steel. Tray fully built-in stainless-steel plate, composed by: 1 Dewatering screens of 1.000x600mm Juice collecting level and canalisation outside the machine. Vibration by means of fibber springs working at high frequency. Reaction mass in 5 mm stainless steel plate. Isolation by means of rubber silent blocks. Chassis in stainless steel structural profile for the required working height. Powered by-mass motor-vibrators (OLI trademark). Supp ...
The AEON Pump is a powerful and reliable solution for efficiently moving water in various industrial and heavy-duty applications. Equipped with a Hidrostal water pump and a robust Hatz diesel engine, this pump is able to move large volumes of water quickly and effectively, even under the toughest conditions., , The Hidrostal water pump is known worldwide for its exceptional performance and durability. Together with the Hatz diesel engine, which is known for its efficiency and reliability, this pump offers the perfect combination of power, energy efficiency and long service life. Whether it is pumping out large water reservoirs, dewatering construction pits, or disposing of contaminated water in industrial environments, the AEON Pump offers the performance you need., , Key features:, , Hidrostal Water Pump: This high-quality pump is designed for heavy-duty applications and offers excellen ...
The PRORIL Tank 315S is a submersible dewatering pump from the Tank series, designed for professional construction and industrial applications such as building pits, basement dewatering, and temporary drainage. It is the 230V version of the Tank 315. Incl., Sulzer floatation ring XJ40 for pumps of 25-40 kg, 00833195 820 mm 400 mm 380 mm 218 mm, Floatation rings offer a solution for pumps up to 45 kg. The floatation ring is easy to install and can be used with all dewatering pumps J 12 to J 15 and XJ 25 to XJ 40. Other pumps can be used after checking the lifting capacity. The floatation rings offer: • Quick and easy installation: place the pump in the ring and tighten the belt. • Compact, lightweight design, easy to install with the pump. Application When a submersible pump needs to be installed floating, Sulzer has the solution. In gravel pits, quarries, construction sites, or on la ...
-System: Used Westfalia Separator as semi-mobile dewatering unit Manufacturer: Westfalia Model: full coat screw centrifuge Design: as a semi-mobile dewatering unit Type: CF 7000 / UCF 646-00-35 Power: 110 kW Year of construction: 2012 Screw drive: 30 kW, IP54, 50 Hz -Accessories: inlet pipe for the feeding of sludge -Decanter connectors: solids discharge chute 1.4301, Central chute, including sample tap 1.4301 -Sludge feeding: rotary piston pump Börger CL520 Flow rate: 50-120 m3/h Power: 11 kW -Mud meter: ABB, COPA XE, DN 100 -Solvents - and dosing station: fully automatically to the release of liquid products Designed for a dose of: 35 kg FHM/h Make: P + P -Eccentric screw pump: to promote the use solution over the subsequent dilution station to the decanter Make: Netzsch, 2-8 m3/h Power: 1.5 kW FU: included in the control -After dilution station: to the Hrabsetzun ...
Used Monobelt, type: NP06-AD belt press for dewatering sludge. Belt width 60 cm. The belt is made entirely of stainless steel, has a fully automated high-pressure pump and two sets of flat jet nozzles for washing the belt. It is equipped with smooth belt feed regulation and a pneumatic installation that controls the belt tension and thus the sludge crushing force. It is also equipped with an automatic belt setting controller on rollers. The press control cabinet is very extensive and controls the press itself but also additional equipment (sludge pump, mixer, dispenser). Press with equipment: - screw pump for sludge with a capacity of 6 m3 per hour with capacity regulation, - dispenser of various types of emulsifiers with capacity regulation and a mixer. The whole is a complete set for work in the agri-food industry, processing, sewage treatment plants, distilleries, bre ...
Stock no.: 503260 Machine/ Device Type: Dry Air Dryer Manufacturer: Anvil+Longleg Type: Sectional dryer H150 Year of construction: 2011 Sectional dryer H 150 with 8 sectional boilers à 100 l Tank capacity: 8 x 100 L Air flow: 400 m³/h The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the dryer system adapts individually to the operational requirements and can be realized in the smallest space. The dryers work dew point controlled and with an energy-saving heat exchanger. Depending on the production requirements, the air flow rate is regulated between 140 and 400 m³/h by process control. Each dryer boiler has an individual temperature control. A separate scanning of the dry goods prevents overdrying and insufficient Drying due to excessive material removal. ...
Used Flottweg B-800 double-belt press. Technical data: Type: B-800 Hourly throughput [t/h]: 2-6 Belt width [mm]: 800 Drive power [kW]: 1.5 Electrical connection [V/A]: depending on the country of installation Pneumatic connection [bar]: 6 Design and operating principle: 1. The product is continuously fed into the feed box and evenly distributed on the lower belt. The height and width of the cakes can be adjusted to the specific product. 2. In the wedge zone, the upper belt is pressed against the product. A slow increase in pressure creates a stable product cake. 3. In the extrusion area, the cake is dewatered, first using a special profile roller, which ensures rapid liquid drainage to both sides of the cake. 4. The product is then effectively dewatered by pressure rollers with gradually decreasing diameters and increasing pressure. 5. Optional linear pressure rollers ...
Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, min./max. operating pressure: 2bar/8bar, min. degree of filtration: 5µm, max. glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, max. tank volume: 30dm³-200dm³, max. Glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions X/Y/Z: approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.
Recycling system with regranulation line, conveyor belt, roller infeed, granulate dosing unit, twin-screw stuffing unit and bagging station, 1) Regranulation line, components: Piovan feeding, backflush filter, extraction system, process-water tank, hot-die-face granulation, granulate dewatering screen, water pump station, granulate scale, granulate centrifugal dryer, granulate conveying system, filling station, swivel side wall for PCU hood. Throughput capacity MDPE, LDPE: 650-725kg/h, PCU drive: 132kW, weight: 12,680kg, extraction system air capacity: max. 3000m³/h, weight: 174kg, process-water tank filling volume: approx. 860l, backflush filter screen diameter: 215mm, number of screen packs: 4, hot-die-face granulation number of knives: 4, knife head speed: 1420/min, granulate dewatering screen dimensions: 1900x700mm, oversize separation: less than 20mm, trough volume: 470l, granulate ...
ID3616 Stichweh S2500 year/Baujahr 1971 Floating grab, 2.5 cbm grab capacity (built in 1985), dredging depth approx. 50 m, with fine sand recovery with belt dewatering, Linatex pump and cyclone, including automatic device and coarse screening Floating grapple, 2.5 cbm grab capacity (year of construction 1985), dredging depth approx. 50 m, with fine sand recovery with belt dewatering, Linatex pump and cyclone, incl. automatic device and coarse screening
Pump is new and unused, assembled by manufacturer, , The SIP-series Screw Impeller Pumps are the do it all” pumps and have become very popular to use in all kinds of wet-construction works. It was just this set-up that has become the middle-man” between the very big market of hi-fuel consuming centrifugal dewatering pumps compared with the very specialized market of super-efficient low-fuel consuming piston pumps. Our 4-inch SIP 100-4 pump set was specially developed to be able to run successfully and efficiently on well-point dewatering without losing its flow while pumping a mixture of water and air. Designed and desired to excel in a wide range of works, our entire range of SIP-series centrifugal pumps handle today’s tough job site conditions. – Impressive solid handling capabilities make them ideal for wastewater, sewerage, mud, and so many more applications you can’t even ...
General SKU354T1032 MakeClima Temperatur Systeme TypeC+10/350/S LocationBarneveld CEcheck Pressure Working pressure25 Bar Main Features MaterialStainless steel Volume338 Ltr. Max.temp.90 °C Specified Features - Drying oven Climate boxcheck Temperature Test Chambers Max. temperature90 °C Capacity338 Ltr, (quantity: 0,9 kg) Internal width645 mm Internal depth710 mm Internal height740 mm Steam heatingcheck Electric capacity3,2 kW Number of doors:1 With air circulationcheck With fancheck With trayscheck MaterialStainless steel Information No.007020 Year of construction2000 Floorspace0,85x1,7 m Total height1,9 m Weight400 kg Extra SpecificationsTemp. range: 10-90 °C Humidity range: 10-95%rF Dew point req. 1: 5-89 °C Dew point req. 2: -19-5 °C Drying ovensCTS Clima Temperatur HechingenDryers > Drying ovensBrand > CTS Clima Temperatur Hechingen What you can ...
Effluent plant for waste water treatment. Includes: - Mixing and equalisation tanks 1, 140 m³ - Mixing and equalisation tanks 2, 40 m³ - Mixing and equalisation tanks 3, 80 m³ - Bioreactor 1, 240 m³ - Bioreactor 2, 240 m³ - 2 air compressors for aeration in the reactors - Secondary sedimentation tank 1, 100 m³ - Secondary sedimentation tank 2, 100 m³ - Thin sludge tank, 70 m³ - Thick sludge tank, 90 m³ - Sludge dewatering 1 and 2 - Precipitant tank, 25 m³ - Various process water pumps, Bioreactor capacity 2 x: 240 m³, Operation / Control: Siemens Simatic S7, Features: Mixing and equalisation tank 1, 2 & 3; Pumping station 1 - inlet bioreactor; pumping station 2 - inlet bioreactor; bioreactor 1; bioreactor 2; pumping station - outlet bioreactors; 2 x air compressor; Precipitant tank; filling unit; 2 x flocculent mixing station; secondary sedimentation tank 1 & 2; mixing tank; t ...
used
The RAPTOR 6 D is a diesel-driven heavy-duty sewage pump designed for demanding applications such as sewage bypass, drainage, and dewatering. Here’s a summary of its key features and competitive advantages:, , Key Features & Competitive Edge, Heavy-duty design: Built to withstand tough conditions in sewage and dewatering applications., Extended maintenance intervals: Reduces downtime and operational costs., High-grade, superior quality components: Ensures durability and reliability., Online telemetry and remote access: Allows monitoring and control of pump performance from a distance., Industry-leading efficiency: Optimized to provide superior performance and energy savings., Dimensions & Weight, Frame Dimensions (L x W x H): 2299 mm x 1100 mm x 1601 mm (90.51 x 43.31 x 63.03 inches), Dry Weight: 1342 kg (2976.24 lbs), Engine Specifications, Cylinders: 3, Displacement: 1.464 L (119.12 ...
used
The RAPTOR 6 D is a diesel-driven heavy-duty sewage pump designed for demanding applications such as sewage bypass, drainage, and dewatering. Here’s a summary of its key features and competitive advantages:, , Key Features & Competitive Edge, Heavy-duty design: Built to withstand tough conditions in sewage and dewatering applications., Extended maintenance intervals: Reduces downtime and operational costs., High-grade, superior quality components: Ensures durability and reliability., Online telemetry and remote access: Allows monitoring and control of pump performance from a distance., Industry-leading efficiency: Optimized to provide superior performance and energy savings., Dimensions & Weight, Frame Dimensions (L x W x H): 2299 mm x 1100 mm x 1601 mm (90.51 x 43.31 x 63.03 inches), Dry Weight: 1342 kg (2976.24 lbs), Engine Specifications, Cylinders: 3, Displacement: 1.464 L (119.12 ...
Used Membrane Filter Press, Chamber Filter Press for sludge dewatering Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix-Paket) Plate size: 1000x1000mm Cake thickness: 40 mm length: 5500 mm Number of Plates: 60 filter pressure: 8 Bar Membrane pressure: 15 Bar Plate transport: manuell filterclothes: optional Membranmix-Paket The machine is in a goog condition and 15 machines like this availabe.
Rittershaus & Blecher / Membrane Filter Press Chamber Filter Press 1000x1000 Detailed Description Used Membrane Filter Press, Chamber Filter Press for sludge dewatering Rittershaus & Blecher / 1000x1000 ( Mix-Paket) Plate size: 1000x1000mm Cake thickness: 40 mm length: 5500 mm Number of Plates: 60 filter pressure: 8 Bar Membrane pressure: 15 Bar Plate transport: manuell filterclothes: optional Membranmix-Paket The machine is in a good condition and 8 machines like this availabe.
Heat Treatment of A356 Aluminum Castings to T5 and T6 Hardness AMS 2750E standard Ovens Chamber Furnaces Laboratory Furnaces Industrial Furnaces Ashing Furnaces Annealing Furnaces Tube Furnaces Vacuum Furnaces Furnace heat treatment normalizing, preheating, austenitizing, pearliting, ferriting or softening. From electrically or gas heated melting furnaces, dewaxing furnaces or core drying furnaces to fully automatic annealing plants for aluminum or steal, covers professionally all applications for the foundry industry. Melting and Holding Furnaces melting furnaces Cleaning Furnace for Riser Tubes, Electrically Heated Forced Convection Furnaces Drop-Bottom Furnaces Electrically Heated or Gas Fired Quench and Tempering Plants for Steel Quench Tanks Chamber and Bogie Hearth Furnaces Catalytic and Thermal Post Combustion Systems Continuous Operation Furnaces Temperature Uniformity and Sy ...
maximum number of results exceeded
please refine your search
15 € 
