135,961 used machines on RESALE, but how to find them? Machine Search
Key data: 225 KW, 1500 1/min
Scania engine DC09-63A fuselage engine from Schnell CHP completely overhauled in exchange. Old engine must be break-free and crack-free + repairable. MIW Motoren-Instandsetzungs-Werk GmbH Nord-West-Ring 8 D-27404 Zeven Germany Phone: 0049 4281 950583 infoatmiw-zeven
Perkins ISM Shibaura E 673 L, 3-cylinder water-cooled diesel engine, displacement 761 cm³, power 11.5 kw/15.4 hp / 3,600 rpm., unused, from stock, incl. starter, and alternator. Other 3-cylinder Perkis diesel engines available, also Isuzu, ISM, Iseki, Komatsu, Kubota, Lombardini, Yanmar.
LISTING ID 22696 BRAND: CATERPILLAR MODEL: 3508 B POWER: 746 kW 1600 RPM COMPLETE WITH PANELS AND ACCESSORIES
MAN D2066 cylinder block 51.01100-6361 / 51.01100-6371 for 2850 Euro / each., The block is used in good condition, delivered with 3 months warranty.
; Power [PS]: 185; Gross weight [kg]: 650; Engine: CATERPILLAR 3116 DIT
Complete reconditioned Cummins QST30C engine., Reconditioned with quality parts and delivered with 12 months warranty., We build engines according to serial numbers of the old engines., This engine can be sold as a core engine as well., Contact our sales.
Key data: 650 mm, 1300 mm, 1 U/min
Circulation diameter over bed 1300 mm, over support 1000 mm Center width 6000 mm Bore 130 mm Speed 1.6 - 630 1/min, infinitely variable in 3 ranges Longitudinal feeds 0.09 - 5 mm/rev Thread metr. 0.56 - 128 mm Thread inches 64 - 0.28 g/" Tailstock quill travel 250 mm Total connected load approx. 52 kW Rapid traverse Rotating bezel 2 fixed bezels closed 1 fixed bezel open Coolant tank with pump
MAN D2066 used crankshafts, pn/ 51.02101-0673 for 1000 Euro / each., Crankshafts have STD sizes and are in perfect condition., Delivered with 3 months warranty.
Complete reconditioned Cummins K200E engine., Reconditioned with quality parts and delivered with 12 months warranty., We build engines according to serial numbers of the old engines., This engine can be sold as a core engine as well., Contact our sales.
greates pass round over bed: 480 mm swing diameter over bed slide: 300 mm turning length: 1500 mm centre height: 240 mm centre distance: 1500 mm spindle bore: 42 mm spindle turning speed range: 14 - 1400 U/min total power requirement: kW weight of the machine ca.: 2,4 t dimensions of machine L x W x H: 3,00 x 1,05 x 1,40 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head, running center The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Complete reconditioned Cummins KTA38 engine., Reconditioned with quality parts and delivered with 12 months warranty., We build engines according to serial numbers of the old engines., This engine can be sold as a core engine as well., Contact our sales.
Complete reconditioned Cummins QSK60 engine., Reconditioned with quality parts and delivered with 12 months warranty., We build engines according to serial numbers of the old engines., This engine can be sold as a core engine as well., Contact our sales.
LISTING ID: 22630 BRAND:IVECO MODEL: 8210 M22 POWER: 162 kW (220 hp) CD RPM: 2200 DISCPLACEMENT: 13.8 L BORE x STROKE (mm) 137 x 156 COMPRESSION RATIO: 16:1 HS CODE 84081019 NET WEIGHT 1130 kg (Dry)
Brand: YANMAR Model: 6AYM-WET Power: 555 kW 1840 rpm Condition: Brand New Country of Origin: Japan Serial Number: 9501 HS CODE 84081079 Weight (kg) :2365 (without marine gear) Dimensions (cm) 200×130×143
2 X ENGINES FOR SALE Brand: MITSUBISHI Model: S12A2 C2 MPTK (FW) Power: 634 kW (850 hp) 1940 rpm Specification: Flywheel housing: SAE-0, Flyvheel: 18 Inch, Starter: 2x 24V, Governor Cooling system: Keel cooled Remarks: R41E3022300 HS CODE 84081019 Dimensions (cm): 230 x 165 x 160 Dry weight (kg) : 3800
CATERPILLAR C7.1 new engines on stock., Arrangement nr 452-9413., Price on request
LISTING ID 22518 Brand: YANMAR Model: 6HYM-WET Condition: Brand New Specification - Model : 6HYM-WET - Number of cylinders: 6 in-line - Bore × stroke (mm) : 132.9 × 165 - Displacement (lit): 13.733 - Rated output (kW(hp)/rpm):M : 441(600)/2100 - Combustion system: Direct injection - Aspiration: Turbocharger + intercooler - Starting system: Electric starting motor (24V 6.0kW) - Cooling system: Heat exchanger - Size of flywheel housing and flywheel: SAE #1 and 14 in.
BRAND: CUMMINS MODEL: KTA19 M3 POWER: 447,42 kW (600 hp) 1800 rpm Condition: New Features:, Flywheel housing ,Flywheel ,Governor ,Exhaust system, ,Cooling system ,Starter/Panel ,Water Pump ,Oil Filters ,Turbocharger Weight (kg) Engine: 2200 Dimensions (cm) 210 x110 x170
MITSUBISHI S6A-300-3 300 HP 1530 RPM (S6A3 MPTK 405 kW 1840 rpm) Dry Weight :+/- 1900 kg Dimensions: 209 x 101 x 137 cm
LISTING ID 22412 BRAND: CATERPILLAR MODEL: 3412 POWER: 537 kW - 720 hp 1800 rpm RPM: 1800 CONDITION: Used Running Take Out Features Flywheel housing Governor Exhaust system Cooling system Starter / Panel Engine Mounts Weight (dry): 2459
If you have any questions or details, please do not hesitate to contact us. Best regards, M.Mousa Serhan , Mobile: 0172 72 653 24 Managing Director-Owner
MITSUBISHI S16R-C2 MPTK (FW) Power: 1700 HP 1600 rpm Features: Flywheel housing,Flywheel,Starter,Governor,Exhaust system,Turbo, Cooling system Engine Specification: 16-cylinder 4-stroke Water-cooled diesel engine With direct-injection, turbocharger Air-cooler Fresh water cooling Bore x stroke (mm) : 170 x 180 Displacement (l) : 65.37 Dimensions (cm): 308.6 x 162.2 x 196 Dry weight (kg) : 6900 Type Approved: Yes
Key data: 75 KW, 300 1/min
Herford engine, diesel heavy oil engine, 1 cylinder, horizontal piston 75 hp 300 rpm, engine was completely overhauled by Fachwerkstatt Schenkluhn, collector's item
Swing over bed 840 mm Swing over support 530 mm Center distance 2000 mm Spindle bore 82 mm Spindle diameter in front bearing 160 mm Spindle taper - metric 100 Morse Tailstock 6 Maximum workpiece weight at the lowest speed of 6000 kg Largest blade profile 40 x 40 mm Electric motor for headstock drive 18.5 kW Machine dimensions L x W 3420 x 1880 mm Machine weight (according to the spike distance) 5700 kg
LISTING ID: 22764 BRAND:MITSUBISHI MODEL: S12R-MPTA POWER: 880 kW (1180 HP) RPM: 1600 RPM Running Take Out Features: Flywheel housing,Flywheel,Governor,Exhaust system,Turbo,Cooling system,Starter,Water Pump Weight Dry (kg) 5,470 Dimensions (cm) 241 x 158 x 180
Crankcase for Mitsubishi S6R-PTA for sale. Year of Make: 2012 Power: 515KW/1500RPM
Key data: 1600 KW, 1500 1/min
Dear Ladies and Gentlemen, We have 2 engines MTU 16V4000 Diesel 1600KW 1500 rpm We have another 2x MTU 20V4000 Diesel 2420KW 1500 rpm Operating hours 260 only and have been regularly serviced. If you have any questions or details, please do not hesitate to contact us. Best regards, Schmidt Mobile: 0172 72 653 24
Center height: 300 mm Center width: 2000 mm Circumferential Ø: over bed 620 mm Spindle bore: 83 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 14 - 1000 rpm Feeds: longitudinal/flat 0.086-4.842/0.04-2.258 mm/rev Thread pitches: 0.5 - 28 mm Electrical connection: 380/400 V, 15 kW Space requirement: 3600 x 1200 x 1350 mm Weight: 3400 kg
Key data: 195 KW, 2300 1/min
Used diesel engine Volvo Penta D7C-B TA identical to Deutz BF6M1013 MC
Key data: 89 KW, 1900 1/min
Diesel engine used, with gearbox ZF220 1.5:1 reduced Volvo Penta D5A-B TA identical to Deutz BF4M1013
turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 38 KW, 2100 1/min
Scania DC13-313A AT engine completely overhauled only in exchange on request with starter, light nose + belt drive. Engine is completely overhauled ready for installation with 12 months warranty. Old engine must come back to us within 14 days without breakage, cracks and repairable.
Key data: 260 mm, 520 mm, 16 U/min
mcm TC 260-105-1500 Premium - Lathe (new) Included premium equipment: - Heidenhain ND5023 3-axis position indicator - 5-position longitudinal stop for the saddle - SRW-Amestra Multifix C quick-change holder with 4 inserts - LED workplace lighting - Set of leveling pads from Spinelli Standard equipment: - Bed, base, headstock, tailstock & sled made of cast iron - Bed guides are induction hardened and ground - Headstock with induction hardened and ground gears - High-precision spindle bearing - Double mechanical coupling - electromagnetic brake - Fast feeds - Pneumatically assisted tailstock movement - Electronic components from Siemens and/or Schneider - Safety devices in accordance with EC standards: plexiglass safety lining guard with microswitch, turret plexiglass safety guard, rear guard along the entire length of the machine, protection of lead screw and feed r ...
Key data: 625 KW, 2 1/min
2x Jenbacher gas engines JMS 312 built in 2008, with brand new generator, exhaust gas heat exchanger next to the engine, additional oil tank. No NOX control. Modules are stored and preserved, location Schleswig, Holstein, modules immediately available, ideal as exchange modules in the event of inspections or fire damage.
Key data: 400 mm
Description Lead and pull spindle lathe VDF Boehringer Göppingen Details Height 1,500 mm Width 1,700 mm Length 4,000 mm without tailstock Bed width 550 mm Bed height 800 mm Bed length 2,000 mm Face Plate Ø 900 mm Forkardt Chuck Ø 500 mm without tailstock, but can be placed Max. workpiece lengths without tailstock 1,500 mm Turning diameter over bed 800 mm Turning diameter over support 640 mm Center height 400 mm 6 pieces of baking 4-fold turning steel holder
Key data: 340 mm
Description Lead and pull spindle lathe VDF Boehringer Göppingen Details Height 1,400 mm Width 1,300 mm Length 4,150 mm Bed width 480 mm Bed height 850 mm Bed length 3,000 mm Face plate Ø 600 mm Forkardt Wedge Bar Chuck Ø 315 mm max. workpiece lengths 2,000 mm Turning diameter over bed 680 mm Turning diameter over support 480 mm Center height 340 mm Drive power 6.5 / 10 kW Lynette Ø 320 mm Multifix holder size C with 5 cassettes
Key data: 400 mm
Description Lead and Pull Spindle Lathe Weisser Heilbronn Details Built in 1969 Height 1,700 mm Width 1,500 mm Length 3,100 mm Bed width 500 mm Bed height 850 mm Bed length 2,000 mm Face plate Ø 600 mm Food possible by arrangement max. workpiece lengths 1,300 mm Turning diameter over bed 800 mm Turning diameter over support 560 mm Center height 400 mm Spindle speed 1,120 rpm. Multifix holder size C with 5 pockets
Key data: 460 mm
Description Lead and Pull Spindle Lathe Lieber LSD S Details Machine no. 1770 Year of manufacture 1984 Height 1,800 mm Width 1,700 mm Length 2,600 mm Bed width 500 mm Bed height 850 mm Bed length 1,600 mm Face Plate Ø 900 mm Forkardt chuck Ø 400 and 500 mm possible (by arrangement) Tailstock MK4 mount max. workpiece lengths 1,000 mm Turning diameter over bed 920 mm Center height 460 mm Turning steel holder will be added
approx. 17 kw/23 hp 2-cylinder diesel engine, water-cooled, complete engine with starter, alternator and gear hydraulic pump. Also available: Isuzu 3 AB 1 – B 02, 3 cyl., 25 kw/34 hp as well as various parts ex Isuzu 3 KC1 Diesel engines 1-6 cyl., various makes: Deutz, Daedong, Farymann, Hatz, Iseki, Isuzu, Komatsu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Output from 4.5 – 100 kw, used, partly as good as new.
6x Containerized Guascor/Siemens G-86EM • Engine; Siemens G-86EM • Year of Construction; 2021 • Operation hours; 12,000 • Electric power; max 2013kWe • Mechanical efficiency; 45,6% • Electrical efficiency; 45,7% • Voltage; 690V • Speed; 1.500 RPM • Frequency; 50Hz
Key data: 800 KW
Module 2 TCG 2016 V 16 C - 800 kW - 43,636 operating hours -Natural gas - Engine number: 2211009 - Year of construction: 2013 - Complete TEM control system with auxiliary unit control - RMG Gas Line – Natural Gas All service work was carried out by MWM service partners according to the manufacturer's specifications / maintenance plan. Sale due to site conversion and plant renewal. More pictures, information and offers on request. Viewing possible at any time by arrangement. Location: 49811 Lingen / Ems Subject to prior sale
maximum number of results exceeded
please refine your search
