deutz engine used for sale

Very Good Condition MAK 552 Spares 1.CON ROD-8 2.CYLINDER HEAD-8 3.FUEL PUMP-8 4.ROCKER ARM ASSEMBLY-8 5.CRANKSHAFT-1

We sell our M.A.N. spare parts stock from our service warehouse here. Enclosed per picture the list of available spare parts. From the screw to the cylinder head. Feel free to take a look and send us your inquiry. You are also welcome to buy the entire stock. Sale under exclusion of any warranty and material defect performance. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales department with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engin ...

Reference number 20130 Brand Gearbox TWIN DISC Model Gearbox MG 518-1 SN 3R4493 Ratio 5,01:1 Power 600 HP RPM 1800 RPM General condition USED RUNNING CONDITION Status AVAILABLE SPECIFIC INFORMATION Flexible coupling YES Controls NO SPECIFIC FEATURES Brackets YES Oil cooler NO Weight (kg) 700 KG

20162 TWIN DISC MGX 5135 A 2.52:1 650 HP 1800 RPM CONDITION : NEW AVAILABLE Yes - DIMENSIONS 55 X 50 X 55 Weight (kg) 280 KG

MARINE DIESEL ENGINE Reference number 20132 Brand CUMMINS Model KTA38 M Power 940 HP RPM 1800 RPM Serial number 33121291 General condition Running Taken Out Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED Governor MECHANICAL CONTROL Turbo YES Aspiration Turbocharged / Jacket Water Aftercooled Cooling system Sea water pump, Heat exchanger, Water cooled Starter Electrical Start (24V) Remarks RUNNING ENGINE INCLUDED 2152mm1462mm2083mm SPECIFIC FEATURES PanelDIMENSIONSLxWxH (cm)Weight (kg) Net Weight 4300 kg

From our current stock we sell 7 cylinder heads with the M.A.N item number / spare part number 51.03101.6923. ( New ). Our item number: 58031001. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how. Draw on  ...

MITSUBISHIS12A2 MPTK940 HP1940 RPM RUNNER ENGINE EXCELLENT CONDITION AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Governor MECHANICAL Exhaust system DRY Turbo DRY Cooling system KEEL COOLING Starter 2 X ELECTRIC 24 V Remarks EXCELLENT CONDITION, FIXED ON STEEL FRAME DIMENSIONS LxWxH (cm) 2,291 x 1,418 x 1,596 Weight (kg) 3,800 KG

MASSON RCD 800 (W8000) 1216 kW /1600 rpm SN 22123 Ratio 3.538:1 1216 kW 1600 RPM Used in excellent condition Available Mechanical Controls Weight (kg) 1800 Dimensions (cm) 125 X 115 X 140

Reference number 20136 Brand MITSUBISHI Model S12R- 2 MPTA SN 11955 Power 1180 HP RPM 1600 RPM General condition RUNNER ENGINE EXCELLENT CONDITION Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Governor MECHANICAL Exhaust system DRY Turbo DRY Cooling system Turbocharged, double cooling,charge air cooler directly cooled by seawater. (Intercooler) Starter 2 X ELECTRIC 24 V Remarks EXCELLENT CONDITION, FIXED ON STEEL FRAME - VIDEO AVAILABLE DIMENSIONS LxWxH (cm) 2,416 x 1585 x 1807 Weight (kg) 5,470 KG

Reference number 20137 Brand MITSUBISHI Model S12R T2 MPTK (FW) SN 13885 Power 1260 HP RPM 1600 RPM General condition RUNNER ENGINE EXCELLEN CONDITION Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Governor MECHANICAL Exhaust system DRY Turbo DRY Cooling system Turbocharged, double cooling,charge air cooler directly cooled by seawater. (Intercooler) Starter 2 X ELECTRIC 24 V Remarks EXCELLENT CONDITION, FIXED ON STEEL FRAME - WITH CLASS DIMENSIONS LxWxH (cm) 2,556 x 1,622 x 1,728 Weight (kg) 5,500 KG

Reference number 20138 Brand MWM SN 6010611374 Model TBD 601 6K Power 375 HP RPM 1350 HP General condition RUNNER ENGINE Status AVAILABLE SPECIFIC INFORMATION Flywheel Included Governor MECHANICAL Exhaust system DRY Turbo DRY Cooling system Sea Water cooled/Keel Cooled Starter 24V Remarks COMPLETE ENGINE FIXED ON STEEL FRAME DIMENSIONS LxWxH (cm) 2400 mm x 1400 mm x 1850 mm Weight (kg) 2900 KG

MARINE GEARBOX Reference number 20148 Brand Gearbox TWIN DISC Model Gearbox MG 518-1 Ratio 5,07:1 Power 600 HP RPM 1800 RPM General condition USED RUNNING TAKEN OUT Status AVAILABLE SPECIFIC INFORMATION SAE Housing SAE-1 Controls MECHANICAL SPECIFIC FEATURES Flexible Coupling : YES 14 Inch flexible coupling Brackets : YES Oil cooler : NO DIMENSIONS 80x120x125 (on euro pallet) Weight (kg)1200 KG

Solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, gas solenoid valve -Manufacturer: Kromschröder, gas solenoid valve -Type: MK 5 R3 B2891 -Pmax.: 130 mbar -Voltage: 220/240 V -Dimensions: 375/115/130 mm -Weight: 7 kg

Motor control, controller -Manufacturer: Phoenix Contact, Mosca Motor Control -Type: EG 45 ME2213 -Number: 12x available -Price per piece -Dimensions: 75/45/H130 mm -Weight: 0.3 kg/pc.

1) Make:Cummins Model:NT855G4 ENG.No:2.3216300 Ref No. REB2-02 ALTERNATOR Make:Stamford Type:MHC434E Serial Number:Y3157/02 KVA:325 HZ:60 2) Make:Cummins Model:NT855G4 ALTERNATOR Make:Stamford Serial Number:Y3159/01 KVA:325 HZ:60 RPM:1800 V:440/254 3) Make:Cummins Model:NT855G4 Serial Number:5324 ALTERNATOR Make:Stamford Type:HC1434D Serial Number:0113587/01 Date:Oct-99 KVA:295 HZ:50

gasoline engine, gas engine, drive engine -1 cylinder -Air-cooled -Engine power: 11 HP -Drive shaft: Ø 35 mm -Dimensions: 450/370/H430 mm -Weight: 35 kg

Pistons 2 pieces Ø 106.5 mm Diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41.278 mm -Total price: 2 pieces -Weight: 1.4 kg/piece

Pistons 4 pieces Ø 106.5 mm Diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41.278 mm -Complete price: 4 pieces -Weight: 1.4 kg/piece

Piston 3 pieces Ø 106.5 mm diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41,278 mm -Complete price: 3 pieces -Weight: 1.4 kg/piece

Reference number 20149 Brand MITSUBISHI Model S6A 2 MPTK Power 470 HP RPM 1940 RPM General condition RUNNER ENGINE EXCELLEN CONDITION Status AVAILABLE SPECIFIC INFORMATION Panel Yes including 2 extra panels and 1 alarm panel Governor MECHANICAL Exhaust system DRY Turbo DRY Cooling system Turbocharged, double cooling,charge air cooler directly cooled by seawater. (Intercooler) Starter 24 V Remarks Runnig video available on request DIMENSIONS LxWxH (cm) 178 x 80 x 1,70 Weight (kg) 2100 KG

Speed Control Unit, speed controller, controller, engine governor, motor controller, motor control controller -Manufacturer: Phoenix Contact, Motor control: Motor control controller -Type: ME2213 -Dimension: 130/45/H75 mm -Weight: 0.3 kg

Starter motor, diesel engine, drive motor, marine diesel engine, diesel generator -Manufacturer: Bosch, starter motor from MWM RHS 518V16 generator -Type: Bosch 0 001 510 003 -Voltage: 24V 9PS -Teeth: 11 -Dimensions: 445/150/H210 mm -Weight: 26 kg

20152 CUMMINS KTA19-M3 600 HP 1800 RPM 2374N.m @1800r/min BRAND NEW AVAILABLE SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 2450mm x 1150mm x 2000mm APPROX 2500 KG

Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...

diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manifold: from generator MWM RHS 518V16 -Dimensions: see photos -Total dimensions: 800/210/H70 mm -Weight: 8.7 kg

20150 MITSUBISHI S6R2 - PTA 575 kW - 770 HP 1500 RPM Serial Number 82000 General condition BRAND NEW Status AVAILABLE SPECIFIC INFORMATION Flywheel housing Governor Exhaust system Turbo / Aspiration Cooling system Starter Remarks SAE 0 Eelectronic DRY Turbocharged WATER COOLED 24 V BRAND NEW FEATURES Raw water pump DIMENSIONS LxWxH (cm) Weight (kg) 1690 mm x 1077mm x 1578 mm APPROX 2800 KG

gasoline engine, gas engine, drive engine -Manufacturer: Perkins, gas engine -Type: unfortunately without type designation -Engine power: -Dimensions: see photos -Transport dimensions: 800/670/H980 mm -Weight: 426 kg

Speed control unit, speed controller, controller, motor controller, motor control, motor controller -Manufacturer: Oriental Motors, Motor control unit Motor controller -Type: BMUD 120-C2 -Quantity: 1x controller available -Dimensions: 135/60/H100 mm -Weight: 0.4 kg

Reference number 20153 Brand Gearbox REINTJES Model Gearbox WAF 540 Ratio 3,955:1 Power 660 KW / 885 HP RPM 1650 General condition USED - EXCELLENT CONDITION Status AVAILABLE SPECIFIC INFORMATION SAE Housing SAE 30 Controls MECHANICAL SPECIFIC FEATURES Brackets YES Oil cooler YES DIMENSIONS 80X50X95 Weight (kg) 1000 KG

1000 RPM and Year of the manufacturer is 2006 and 2007 1100 kw and 1153 kw

hydraulic pump with gasoline engine -mobile hydraulic unit -Gasoline engine: JLO L152 -Power: 4.4 KW -Hydraulic pump: Hawe R6.0 -Performance: 4.3 L/min at 1450 rpm, pressure 350 bar

Reference number Brand Model Power 20152 CUMMINS KTA19-M3 600 HP 1800 RPM PEAK TORQUE 2374N.m @1800r/min BRAND NEW AVAILABLE SPECIFIC INFORMATION Flywheel housing Flywheel Governor Exhaust system Turbo Cooling system Starter Remarks Sae-0, Sae-1 18 inch, 14 inch MECHANICAL WET TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 2450mm x 1150mm x 2000mm

20153 CUMMINS 6 CTA 8.3GM 163 kW MARINE DIESEL ENGINE GENERATOR TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 1200mm x 800mm x 1350mm 1300 KG

Piston 2 pieces Ø 106.5 mm diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41,278 mm -Complete price: 2 pieces -Weight: 1.4 kg/piece

20154 CUMMINS 4 BTA 3.9GM 50kW MARINE DIESEL GENERATOR UC 1224F BRAND NEW AVAILABLE TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 770mm x 710mm x 793mm 360 KG

20155 CUMMINS 4 BT 3.9GM 36kW MARINE DIESEL GENERATOR UC 1224C BRAND NEW AVAILABLE TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 770mm x 710mm x793mm 350 KG

Cylinder head to Hanomag diesel engine

Auction-ID: A1-45411-277

Auction-ID: A7-45768-39

Reference number 20156 Brand Gearbox REINTJES Model Gearbox WAF 540 Ratio 3,955:1 Power 660 KW / 885 HP RPM 1650 General condition USED - EXCELLENT CONDITION Status AVAILABLE SPECIFIC INFORMATION SAE Housing SAE 30 Controls MECHANICAL SPECIFIC FEATURES Brackets YES Oil cooler YES DIMENSIONS 80X50X95 Weight (kg) 1000 KG

Various engines and attachments to Caterpillar Dozer D4

; Gross weight [kg]: 1500; Engine: CATERPILLAR 3408E

20157 TWIN DISC MG 507-1 1.77:1 150 HP 1800 RPM RUNNING TAKEN OUT AVAILABLE SPECIFIC INFORMATION SAE Housing Flexible Coupling Controls Yes 14 inch MECHANICAL SPECIFIC FEATURES Brackets no Oil cooler no DIMENSIONS 55 X 50 X 55 Weight (kg) 144 KG

1998 model 2725 bhp 2005 kw Exwork delivery Aliaga/Turkey caglar@dortelgemi

; Transport weight [kg]: 840

; Transport weight [kg]: 1060

; Transport weight [kg]: 1040

; Transport weight [kg]: 1180

; Transport weight [kg]: 1000