129,192 used machines on RESALE, but how to find them? Machine Search
HORIZONTAL BORING MILL (floor type) Inv. No. 12.019BM Make UNION Model BFP 125-1 Mach. No. 7935/62 Spindle Slide. Ø 125 mm Spindle Taper ISO 50 P.D.B. Horizontal Travel Spindle 1.130 mm Horizontal Travel Column 6.000 mm Vertical Travel Headstock 1,700 mm Cross Travel Column 400 mm R.P.M. 2.24 - 450 (27x) KW 14 Volts 380 Cycles 50 Including: Facing Head D.R.O. Auction-ID: A1-45737-107
HORIZONTAL BORING MILL (floor type) Inv. No. 11.474BM Make UNION Model BFP 125 Mach. No. 10386 Spindle Slide. Ø 125 mm Spindle Taper ISO 50 P.D.B. Horizontal Travel Spindle 1.000 mm Horizontal Travel Column 7.000 mm Vertical Travel Headstock 2,500 mm Cross Travel Column 450 mm R.P.M. 3.55 – 710 (27x) kW 25 Volts 380 Cycles 50 Including: Facing Head Ø 800 mm Auction-ID: A1-45737-101
Spring-applied brake LENZE BFK 458-08E 30513 3.5 NM 180 V DC 25 W Dimensions: Ø 105 x 50 mm
Mobile welding fume extraction TBH BF100/200R, year 2014, 230 V/50/60 Hz, 1.1 kW, S/N 216982, rollable
HANSE LIFTER BFAR-02 pallet truck, load capacity 2,500 kg, built in 2011, S/N 1103-854445-127, dead weight 76 kg, lowers only under load, internal No. 21
HORIZONTAL BORING MILL (table type) Inv. No. 13.077A1 Make UMA Model BF56 Spindle diameter Ø 75 mm Taper ISO 40 DIN Table 450 x 560 mm Cross travel (X) 550 mm Drilling height over the table 600 mm Drilling range 55 mm Drilling depth 900 mm Rapid feed for table Longitudinal travel 4 m/min Cross travel 2 m/min Weight 2600 KG Including: Induction-hardened table guides Electromagnetic feed coupling Emergency stop button for rapid traverse and electromagnetic feed clutch Protective covers over the bed 1 hardened sleeve for machine vice, 40 mm opening Auction-ID: A1-45737-138
Works perfectly Coach Long trolley Cutting length 127cm Presser Leitz tools Auction-ID: A3-43519-36011
24 mm WISA-Spruce Fi.-Plywood II/III BFU 100 verl. according to DIN 68705 T3, E1 CE: EN 13986 - EN Auction-ID: A1-46501-1782
new
New engine Lombardini LDW 1404 Deutz F4M1008F = no alternator, starter, flywheel, Exhaust manifold.
Working condition, 7 bar working pressure Auction-ID: A3-43525-2195
Equipped with: Deutz engine block from a Fendt 410 Auction-ID: A1-40137-103
Model: Deutz-Fahr 8280 TTV, 280 hp, year of construction 2021, Stage V emission standard, continuously variable TTV transmission • Operating hours: 2,174 h – new engine (10 h), factory replacement carried out Facilities & Comfort: • Full suspension front axle and cab suspension • Air conditioning / automatic climate control, comfort seat with air suspension, heated & electrically adjustable exterior mirrors • Clear-view roof for a better overview • ISOBUS-capable, RTK preparation for precision farming • LED work lights all around, rotating lights Hydraulics & PTO: • Load-sensing hydraulic pump (210 l/min) • Rear: 5 double-acting control units (10 ports) • Front: 1 double-acting control unit (2 ports) • Additional lines: Power Beyond & Pressureless Return • Front linkage + front PTO, rear PTO 540/540E/1000/1000E • Hyd ...
The tractor is in good optical condition but has a technical problem. Problem with clutch and/or gearbox (shifting problem), the engine was overhauled about 500 working hours ago. Auction-ID: A3-43520-34071
mileage - 3,800 operating hours, radio, air conditioning, windshield roller blind, mechanically adjustable driver's seat, front tire 380/85-24, rear tire 420/85-34 Auction-ID: A7-46293-4
Features: - New front tyres - Remanufactured cylinders - New head gaskets Auction-ID: A1-40136-92
Cutting width 2600mm, height adjustable, leaks a little oil when height adjustment. Auction-ID: A1-40136-191
Air conditioning Cab suspension Charger 2022 6 cylinders Auction-ID: A3-43524-39067
-Deutz agrotron 90 -6890 hours -2 DW valves -heating needs to be checked Auction-ID: A3-43524-17249
Deutz-Fahr 7250 Agrotron TTV in very good working order. Gearbox replaced at 6400 hours. Equipped with a new brake master cylinder, air brakes and electric handbrake. The tractor also has a blow gun in the cab, 2 hydraulic sockets at the front and the Isobus system. Reliable and well-maintained machine, ready to be used immediately and continue the work Auction-ID: A3-43529-36025
Measuring table, measuring plate with measuring column and dial gauge holder PAGUS measuring range: 180 mm working surface: 125 x 125 mm working height: 54 mm projection: 140 mm in wooden box New ! still preserved ! Dimensions: 310 x 250 x 160 mm
Pneumatic cylinder FESTO DVG-50-125-PPV VDMA 164456 M708 stroke: 125 mm Rod diameter Ø 20 mm Dimensions: 310 x 70 x 65 mm
Pneumatic cylinders, flat cylinders FESTO DZF-63-125-A-P-A 161314 stroke: 125 mm rod diameter Ø 20 mm New ! Dimensions: 250 x 127 x 50 mm
Pneumatic cylinder with position sensors FESTO DNC-50-125-PPV-A 163374 stroke: 125 mm rod diameter Ø 20 mm with fasteners ! Dimensions: 450 x 75 x 70 mm
Pneumatic cylinder FESTO DNC-80-1200-P 163430 stroke: 1200 mm rod diameter Ø 25 mm Piston rod thread: M20 x 1,5 used, tested ! Dimensions: 1540 x 95 x 95 mm
Pneumatic cylinders, standard cylinders FESTO DNG-32-125-PPV-A 36326 stroke: 125 mm rod diameter: Ø 12 mm pmax: 12 bar New ! Dimensions: 280 x 50 x 50 mm
Workbench PAGUS 1250 x 1250 mm Board thickness: approx. 50 mm height: 870 mm used, tested ! Dimensions: 1250 x 1250 x 870 mm
Workbench with vise PAGUS 1250 x 1250 mm Plate thickness: approx. 50 mm height: 870 mm vice < -br /> LINEN JUNIOR jaw width: 125 mm span: 190 mm used, tested ! Dimensions: 1250 x 1250 x 1150 mm
Welding machine MIG120 Can also be used with gas-filled wire Technical specifications Supply voltage: AC 220V ±15% Rated power: 3.6 kVA Rated current: 19.2 A Welding current range: 30 – 120 A Open circuit voltage: 50V ±5 Duty cycle: 30% Dimensions: 270 x 150 x 165 mm
\" Column slewing crane 125 kg with electric chain hoist Manufacturer: Mechanik Taucha Fördertechnik GmbH Type: KSX 125-2.5/BH 2.5 S0 Year of construction: 2015 Factory no.: 2.014.070-001 Compact column-mounted slewing crane make Mechanik Taucha with a load capacity of 125 kg. The crane was used for loading and unloading CNC machining centers as well as for handling small workpieces and clamping devices. The system is equipped with an electric chain hoist from LIFTKET. The stroke is carried out electrically via the electric chain hoist. The slewing movement of the crane is carried out manually via the column. Operation via pendant button control. A crane inspection book in accordance with DGUV is available. System consisting of: • Column • Boom • Electric chain hoist LIFTKET • Trolley • Pendant switch control Inspection possible by appointment. Load capacity: 125 kg Hoist ...
Mitutoyo gauge block set – Grade 1 – BM1-122-1/PD – 122 pieces – in a wooden box High-quality gauge set from Mitutoyo in accuracy class (Grade) 1, delivered in the original wooden box with a precisely fitting insert. The set is ideal for precision measurements, calibration tasks, QA departments, toolmaking and metrology. Condition: • Visually good, well-maintained condition • Slight signs of wear possible due to age and use • Calibration sticker available (07/2016) • Set is complete (empty spaces at the top left are intended for wear blocks) Scope of delivery: • Mitutoyo Gauge Block Set 122 pieces • &n ...
Unaudited Good condition Auction-ID: A7-46327-149
Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980
Cat.-Nr. 11-2920 in a very good condition Manufacturer: Raum Measurements: HxD: 3400 x 2200 mm Material: V2A - AISI 304, 1.4301 Surface: inside 2B=IIIC, outside marbled On the top: with Inlet with 2 x Transport Hooks Tank Body: with Sample Valve with Temperature Indicator with Clap with Manhole Lid 450x330 with Connector for Level Indicator with Outlet DN 80 The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Kat. No. 09-1049-4 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 2,100 mms of weight: 136 kg Surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature control unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Kat. No. 09-1590-4 new standard equipment: With rest outlet with sloping seat discs valve DN 50 With cylindrical conical ground below and on top Test pressure: 1.5 cash – admitted working pressure: 0.49 bar Material V2A AISI 304 - surface inside and outside IIIC With manhole DN 400 m. 6 screws thread connection carbines DN 25 and with sloping seat discs valve DN 25 contents: 1,200 litres diameter: 1,000 mm total height: 1,980 mm weight: 115 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Cat. No. 11-4105 in very good condition Material: V2A - AISI 304, 1.4301- Surface: inside and outside 2B=IIIC Topsoil: with manhole pressure cap 1.5 bar test pressure DN 400 with 6 star head screws, with handle bracket, Threaded welding nozzle DN 50 Tank body: manhole 430x300 mm Underbody: Konusboden 45 with forward-drawn outlet pipe with disc valve DN 65, with forklift shoes, with stable frame, with pallet lift truck all sides underpassable. Test pressure: 1.5 bar Working pressure: 0.99 bar DxH: 1100 x 2200 mm - Weight: 230 kg Supplements/pieces (on request): Fermentation spandconnection DN 50 Euro Trial tap Blind cap DN 50 Fermented spundar fitting CIP Cleaning The price is for a tank. For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our c ...
Reifenhäuser Schnecke D = 120 mm - 30 l/d, used for extruder type RH or RT 1651-1-120-30 also available: Set 120 mm - 25 L/D consisting of cylinder and new screw available for Reifenhäuser Extruder Model RT/RH 1651-1-120-25
Multiple rip saw Paul K34G / 1200 With loading and stacking Wamhoff Plate size: max. 2.25 mx 1.10 m 6 cycles / min, Year of construction 1988, Mechanization - 1993 Main motor 48 kW Condition - excellent With: infeeding roller bed, outfeeding roller bed, suction and several saw blades.
Heavy duty lathe Waldrich Distance between centers: 12000 mm Turning diameter: -Over bed: 2000 mm -Over cross slide: 1640 mm Weight of work piece: max 40 ton Spindle speed range, stepless: 1,5-92,5 rpm Year of manufacturing: 1960
Cat. No. 11-3170 New without heating jacket - round standing on feet Medium-contact parts V4A (AISI 316) with electric screw-in heating 230/400 V, 7.5 kW Standard: Material: medium-contact parts V4A (AISI 316) - otherwise V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Insulation made of mineral wool for hot water tanks thickness = 80 mm Standard: Manhole top DN 400 Ventilation and vent valve made of PVC Manhole inside oval 440 x 350 and manhole 500 x 430 outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with forward-drawn outlet pipe DN 50 with disc valve DN 50 with lid Digital thermometers Clear drain DN 50 with disc valve with lid Transport eyelets with electric screw-in heating, 230/400V, 7.5 kW Cat. No. Contents ...
used
ASPIRATOR / CLEANING OF GRAIN / 120 T / H CONVECTION 9.2 KW SCREEN DRIVE 3 KW IMMEDIATELY AVAILABLE MOB: + 49 171 5213204
56 Boxes pallet rack (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -Stand 57 / 224 trusses -Traverse length 2.70 m - load per level 2.4 tons -Shelf height: 5.50 m depth 1, 05 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory amounted to approximately 550 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commer ...
Stand control panel made of V2A as good as new Width 400/ 600 mm Length 1200 mm Height 1000 mm Storage clearance 400,-€
OHRA Kragarmregal NEW Negotiation price: € 1,760,-- net They offer on a shelf with a length of 4.5 m, consisting of: 4 stand with foot, 4 m high + 3 adjustable booms per stand (120 cm), load capacity 1100 kg/boom. Diagonal struts, stiffening and distances are included. Frame spacing 150 cm Arm length / boom 120 cm Load capacity 1100 kg / boom Load capacity per stand per side 3500 kg Over 100 meters available Heights of 2.5 m, 4 m or 6 m are available. Other compilations on request.
used
RECON Pn. 1213 3885 #604.16.010139 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
maximum number of results exceeded
please refine your search
3.000 € 
