138,073 used machines on RESALE, but how to find them? Machine Search
Control: Siemens 840 D powerline Accessories: Tool holder bar loading magazine Fully functional and still under power, can be visited at any time
Budde telescopic roller conveyor 5150-12000-600 RA2081 The two telescopic elements of the telescopic conveyor can be manually extended or retracted using a hand crank. Attention! ONLY suitable for truck loading Year of manufacture: 2002 Condition: function-tested, used Optical: Signs of use Base part with double supports: 800 mm height Telescopic elements 2 pieces: manually extendable and retractable Telescopic extension/retraction: hand crank on the operating side Accumulation effect: Accumulation with inclination running upwards Technical data: Stationary part Length: 5150, + 6850 mm Extendable parts Roller width: 600 mm Outer width: 850 mm Height 1 transfer: 800 mm, 1020 with crank handle - Loading e.g. via customer conveyor belt Galvanized rollers diameter 50 mm Roller pitch: 80 mm Operation/crank: front side Self-retaining crank Color: Grey Supports: 2 rigid double supports Base pl ...
V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 2-groove pulley type SPZ Ø 120 mm -V-belt width: 10 mm -Mounting: Ø28 x 52 mm -Dimensions: Ø120 x 52 mm -Weight: 2.2 kg
V-belt pulley, belt pulley, double-wheel pulley -V-belt pulley: 2-groove pulley type SPZ Ø 125 mm -V-belt width: 10 mm -Hole: Ø28 mm -Dimensions: Ø125 x 55 mm -Weight: 0.6 kg
Wartsila 12V32LN Crankshaft Suitable for 12V32 Vasa type Free Of cracks or welding With measurement reports available 1 pcs in our istanbul Stock
Shelf tray, spill tray, floor tray, pallet tray, collection container, spill pallet -Manufacturer: P&D, drip tray -Drip tray: Type -Collection volume: 180 liters -Load capacity: 800 kg -Grating: galvanized -Dimensions: 1210/1240/H285 mm -Weight: 493 kg
Deckel Maho Universal Milling Machine DMU 125 P 1,250 x 880 x 800 mm Motor spindle 18,000 1/min. Tool holder SK 40 Automatic Swivel Milling Head Horizontal tool changer setup Double gripper 30 magazine slots Coolant tank 600 litres Internal cooling IKZ Form AD Conveyor Rotating viewing panel 3D path control TNC 430 NC rotary table diameter 1,250 x 1,000 mm Universal milling head with controlled B-axis Electronic handwheel Probe Infrared Heidenhain TS 631
used
Definition Flash 128 with 2 tubes as spare parts dispenser
ID3361 Toy Bird 1250 year/Baujahr 1997 Block saw, max. 2300 mm diameter, manual turntable, in 2021 completely new control system installed and saw motor overhauled Block saw, max. 2300 mm diameter, manual rotary table, completely new control system installed in 2021 and saw motor overhauled
Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, spindle tool, facing and boring head -Boring head: MK5 mount -Spindle size: Ø 120-140 mm -Dimensions: Ø 124 x 253 mm -Weight: 8.4 kg
It is a used, reconditioned Diosna mixer S 120 Plus (for max. 120kg dough / 75kg flour) for sale. The machine is in very good condition and fully functional. The mixer has a stainless steel bowl, stainless steel kneading arm, a flour dust cover, two speeds and is mobile. The machine has a new control system with two timers. A video can be sent on request. Price on request.
Tool holder, milling holder, milling tool, test mandrel -Test mandrel: Ø 50 mm -Recording: SK50 -Shaft: R=25,000 / L=120,068 mm -Dimensions total: Ø 98 x 255 mm -Weight: 4.4 kg
Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 130 x 30 mm -Clamping depth: 125 mm -Dimensions: 405/130/H105 mm -Weight: 18.7 kg
Hook, retaining arm, retaining bracket -Hook: Holding arm -Load capacity: 125 kg -Number: 2 hooks available -price: per piece -Dimensions: 800/325/H125 mm -Weight: 9.4 kg/pc.
CNC control, card slot, control cards, plug-in cards, circuit boards, control rack, control unit -Manufacturer: Robosoft, Control Rack -Type: 411-1206 -Fuse block: 412-2240 -Circuit board: 413-0800 -Individual components: see photos -Price/Sale: complete -Dimensions: 500/195/H145 mm -Weight: 3.6 kg
Transnorm angled-belt conveyor 45° 1500-1250-1000 RA1850 Exhibit Make: Transnorm Year of manufacture: 2018 Inlet angle: 45 Length center: 1500 mm Belt width (RB): 1000 mm Frame height: 270 mm Nominal/external width (NB): 1250 mm Conveying speed: 0.717 mm V230/400 kW 1,5 Overall height side wall: 300 mm Scope of delivery: with motor and side guides (if required, please ask) Optional: Supports Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: scope of delivery: including side guides without supports Construction year: 2018 angle: 45° KW: 1,5/S1 Electric data: 220-240, 380-400 condition: Ausstellungsstück Conveying length in mm (NL): 1500 Frame width in mm (NB): 1250 Belt width in mm (GuB): 1000 Bauhöhe in mm (BH): 270 Antrieb: SEW Getriebemotor Optional erhältlich: Movi-Mot For individual ...
electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate, magnetic prism, magnetic prism -Magnetic prism: Magnetic measuring and clamping prism -Clamping surface: Length 120 mm -Prisms/Clamping surface: see photos -Magnet: can be switched on and off -Dimensions: 120/75/H105 mm -Weight: 4.5 kg
max. wheel diameter: 53 mm gear width: 25 mm max. module: 3 min. module: 0,1 total power requirement: 0,8 kW weight of the machine ca.: 0,21 t dimensions of the machine ca.: 600x460x1200 mm Resharpening machine MIKRON 121 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 6400 mm, 3 mm
with the following equipment: - Tin cassette - Hydraulic upper beam adjustment - Additional stand unit - Cheeks laser-hardened - Control with swivel arm - Motor stop system type 11 measuring range 20-1250mm - Stop finger 4x - Crowning device, manual - Control on the swivel arm Original price of the machine approx. 269,000 € Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.with the following equipment: - Tin cassette - Hydraulic upper beam adjustment - Additional stand unit - Cheeks laser-hardened - Control with swivel arm - Motor stop system type 11 measuring range 20-1250mm - Stop finger 4x - Crowning device, manual - Control on the swivel arm Original price of the machine approx. 269,000 € Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried ...
6-sided packaging machine from the manufacturer Mac Due, model: Maxi 120/A and integrated shrink tunnel T.150-80 R. suitable for dimensions: 1000 x 1700 x 500 mm. Dimensions complete system: 11245 x 2170 x 2460 mm incl. extensive documentation Viewings possible at any time by arrangement.
clamping force: 400 kN injection volume: 125 cm³ screw diameter: -- mm platen size: 550 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand, Modell TTV-C40-125 C40P01B clamping unit: - Clamping unit: vertical - Tonnage: 40 t - clamping force: 400 kN - Heating platen size: 550 x 400 mm Injection unit: - Injection volume max.: 125 cm³ - Connected load: 3x 400 V, 50 Hz 90A fuse protection Approx. dimensions: 1,550 x 1,050 x 3,120 mm Weight approx.: 3,200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Total length: 285 mm -Width/Height: 100/120 mm -Dimensions: see drawing in the photos -Weight: 23.7 kg
Angle bracket, locksmith square, flat angle, control angle -Flat angle: Leg length 190 x 120 mm -Quantity: 1x flat angle available -Dimensions: 190/120/H5 mm -Weight: 0.3 kg
Speed control unit, speed controller, controller, motor controller, motor control, motor controller -Manufacturer: Oriental Motors, Motor control unit Motor controller -Type: BMUD 120-C2 -Quantity: 1x controller available -Dimensions: 135/60/H100 mm -Weight: 0.4 kg
Capacity: 1.230 Ltr. Operating pressure: 3.0 bar, according to the nameplate Year of Make: 1999 Manuf.: Caspary GmbH Material: stainless steel, 1.4301 Design: Cylindrical sthd, on 3 feet, outlet with disc valve DN 32, pulled down cleaning line with spray head and pressure fitting, sample tap, disc valves DN 32, manhole cover last use: beer Height approx. 2,270 mm (with cleaning line) Diameter: approx. 950 mm Mail: infohochholzer
Fan filter, fan array, air cooler, control cabinet fan, filter fan -Manufacturer: Rittal, filter fan type SK 3238.124 -Motor: NMB 24 V DC 0.32A -Number: 2 fans included -Price: per piece -Dimensions: 150/150/70 mm -Weight: 0.4 kg/pc.
Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cubes: heavy-duty version, 4 pieces -Length: 500 mm -Material: Steel -Submission/Price: complete -Dimensions: 500/120/H160 mm each -Transport dimensions: 500/480/H160 mm -Weight: 207 kg
Warming cabinet, plate warmer, stainless steel warming cabinet -Manufacturer: GGG Gastro Großküchentechnik, stainless steel warming cabinet -Interior dimensions: 1225/620/H580 mm with adjustable intermediate shelf -Temperature range: 30°C and 90°C, continuously adjustable -Dimensions: 1400/730/H850 mm -Weight: 72 kg
The facility is an exhibition facility or test facility in an absolutely new condition. The plant was built in 2024 for the filtration of cooling lubricants in tool grinding: oil + carbide. Filtration is carried out with the help of 61 filter cartridges located in a cylinder housing. The dirty oil is pressed through the filter surface and runs through the inside of the filter into the clean container. The filter works in fully automatic mode. The filter pressure is monitored during the filtration process and as soon as the filter cake has been formed and the pressure increases, the filter is backwashed with compressed air. Then the filtration process starts all over again. The filtration system can be directly connected to the grinding machine, lapping machine, honing machine, etc. Filtration is carried out without consumables, as the filter is backwashed (filter flow, etc.). Th ...
Compressed air filter, fine filter -Connection: 2 inch -Number: 3 filters available Price: per piece
self-aligning ball bearing -Bore: Ø 45 mm -Outer diameter: 85 mm -Width: 19 mm
x-travel: 1.250 mm y-travel: 880 mm z-travel: 800 mm Control: HEIDENHAIN iTNC530 workpiece height max.: 1.230 mm max. workpiece diameter: 1.250 mm Nc rotary table: : numbers of pallets: 2 size of pallet: 1.000 x 800 mm : Ø 1.100 mm max. table load: 1.000 kg c-axis: 360 x 0,001 ° Universal Milling Head: - B-axis: + 180 / -7 ° - stufenlos resolution: 0,001 ° max. power ED 40 %: 28 kW Speed range, stepless: 20 - 18.000 min-1 tool taper: HSK-63 DIN 69893 Form A feed, rapid traverse:: - feeds x/y/z -stepless: 0 - 15.000 mm/min rapid in X/Y/Z: 40.000 mm/min tool magazine: - Number of tool places: 60 St tool taper: HSK-A63 voltage: 3x 400 V connected load: 58 kVA Overall size: - Space requirement: ca. 5,5 x 4,5 x 3,2 m weight of the machine ca.: 15.000 kg 5-Axis Universal milling machine in a very sturdy design with NC rotary table, tool magazine and pallet changer, NC swivelling milling h ...
Front brush, front sweeper, sweeping roller, sweeping brush -Suitable for: Iseki Hako and other tractors -PTO drive -Three-point recording -hydraulic: swiveling -Broom width: 1200 mm -Weight: 140 kg
table diameter: - mm table load: - t table height: - mm Control: - total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m CNC Swivel Rotary Table/ CNC Dividing Apparatus incl. Tailstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Power: 0.75 kW -Input: 1 x 200 - 240 V - 50/60Hz -Output: 3 Ph : 380/460 V -Number: 1x converter available -Weight: 3.4 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 170 mm -Clamping depth: max. 120 mm -Dimensions: 480/170/H130 mm -Weight: 30 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 155 mm -Clamping depth: max. 120 mm -Dimensions: 550/300/H160 mm -Weight: 38 kg
Vacuum tumbler Manufacturer: Henneken Model: B3 Volume: 1200 liters Electric power: 2.8kW Dimensions: 1130x2225x1675mm
Used spiral mixer DIOSNA, type: SP 120 F/T -Refurbished- - For 120 kg of dough or 75 kg of flour - Kettle and kneading arm made of stainless steel - With stub cover - With digital control - Condition: Very good, overhauled - 6 months warranty The machine can be viewed and tested by appointment.
Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -Replaceable jaws: soft -Weight: 6 kg
Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -Replaceable jaws: soft -Cone mounting: Ø 82 mm -Bolt circle: Ø 105 mm -Weight: 14 kg
Throughput depends on material type, speed, and cutting set Capacity: up to 1.500 kg/h Electric power: 7.5 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 60 Length: 100 Height: 120
Throughput depends on material type, speed, and cutting set Capacity: up to 2.000 kg/h Electric power: 7,5 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 55 Length: 95 Height: 105
Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes -Holes diameter: 90/105/125/160 mm -Angle: adjustable -Double clamping device: for pipe mounting -Weight: 65 kg
All stainless steel Hopper capacity: 1200 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Setting of working time Delay start Electric power: 11 KW Installation dimensions of machines in cm: Width: 162 Length: 224 Height: 191
maximum number of results exceeded
please refine your search
