deutz bf 12 used for sale

Granule dryer for heating and drying hygroscopic plastic granules. Tank capacity 1200 l. Heating capacity 9 kW. Optionally available with air dryer AZO LE 400 K

LISTING ID: 22741 BRAND: MASSON MODEL: ZFW (MM) 12000 C RATIO: 1:2,747 POWER: 1369 kW (1835 bhp) 1800 rpm WEIGHT: 2530 DIMENSIONS: 110 x 148 x 143 (h)(cm) HS CODE: 84836080

clamping rail, guide rail, support rail, stop rail -Mounting rail: with T-slot -Length: 1200 mm -Groove width: 15 mm, dimensions see photo technical drawing -Dimensions: 1200/80/H30 mm -Weight: 18.4 kg

strapping machine, packaging machine, strapping device, strapping set, unwinding trolley, strap dispenser, cutting stand, vertical cutting stand -Manufacturer: HAVA, cutting stand cutting device on mobile base frame -Cutting width: up to 1250 mm -Roll diameter up to 850 mm -Dimensions: 1655/730/H1150 mm -Weight: 22 kg

housing screw connection, screw-in screw connection -Cable gland: 2 pieces -Type: LMZ 27.9-127-G1 -Price/Delivery: complete -Dimensions box: 115/110/H65 mm -Weight: 0.2 kg/piece

Italian made Mario Croci & Figli Concrete pipe machine. In great condition (the machine is new and it has never produced a single pipe). It is weather protected, placed in a dry warehouse. It produces 2 and 2.5m length pipes of D30 up to D120cm diameter. It comes with D300, D400, D500, D600 moulds along with rings. Located in Drama-Greece. Excellent bargain!

Aluminium Z-conveyor belt incl. substructure Horizontal range 1,200mm (customizable) Rising range 3,000mm (customizable) 2nd horizontal range: 1,200mm (customizable) Angle in the bend 45 degrees each Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable (can be moved) Conveyor belt width 700mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 80x50mm T-65Studs - 150mm 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is currently ap ...

Centrifugal fan REITZ MXE 125-016030-00 Type GR 90° direct drive 45 kW m³/min 160 mm WS 1250 Intake ø 350 mm, outlet ø 275 Workshop tested, very good condition

Micrometer screws, micrometer screws, outside micrometers, outside micrometers -Manufacturer: Steinmeyer, micrometer -Measuring range: 125-150 mm -Reading: 0.01 mm -locking device -other sizes: also available -Case dimensions: 335/180/H30 mm -Weight: 0,9 kg

Micrometer screws, micrometer screws, outside micrometers, outside micrometers -Micrometer: outside micrometer -Measuring range: 100-125 mm -Reading: 0.01 mm -locking device -other sizes: also available -Case dimensions: 315/160/H30 mm -Weight: 1.0 kg

Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, pull-down clamp -Manufacturer: WILA, stable clamping jaw height adjustable -Clamping jaw: 120 x 45 mm -Clamping height: 85 - 105 mm -Groove width: 28 mm -Dimensions: 240/120/H90 mm -Weight: 10.6 kg

120 mm cold feed pen convert-extruder, GE 120 SC, make Berstorff, output capacity up to 1,000 kg /h as a power extruder with strip spray head, complete rebuild mechanically and electrically in 2024

Complete Sterile Tank Unit with PLC and Aseptic Valve Cluster High-quality sterile tank unit designed for hygienic storage and handling of liquid food products such as milk, juice, and similar beverages. The system includes a fully automatic aseptic valve cluster with PLC control and HMI, ensuring reliable operation and integration into modern aseptic processing lines. Main Tank Specifications - Tank Product Capacity: 12,740 liters (12.74 m³) - Working Capacity: 10,850 liters (10.85 m³) - Water Capacity: 662 liters - Maximum Pressure: 3.5 bar - Minimum Pressure: -1.0 bar - Test Pressure: 5.8 bar - Maximum Temperature: 145 °C Technical Data Materials - Product contact parts: 1.4404 stainless steel - Cooling jacket and legs: 1.4301 stainless steel Design Parameters - Design Pressure: +3.5 bar ÷ -1 bar - Design Temperature: 145 °C - Total Capacity: 12.74 m³  ...

tool holder, milling holder, milling tool, adapter, intermediate sleeve, extension adapter -Manufacturer: Sandvik Coromant, milling adapter Ovp -Type: C8-391.01-80 125A -Mounting diameter: 80 mm -Functional length L: 125 mm -Transport dimensions: Ø 80 x 173 mm -Weight: 4.5 kg/total

used spiral mixer Boku SK 120 AK extendable, overhauled, for 120 kg dough per kettle, 2 timers, with 1 stainless steel kettle, if required with up to 2 other kettles for 3.500€ each, stainless steel spiral, 7.9 kW, 18.5 A, 400 V, 50 Hz, mesh no. 10287

Wartsila 1 x 12v32LN DG 4.2 MW , 750 RPM, 11kv volt, 50hz. Diesel Generator , Gen set, DG Set Power plant with accessories for sale.

power converter, power supply, power pack, switching power supply, power supply module, DIN rail power supply -Manufacturer: Mean Well, switching power supply DIN rail type WDR-120-24 -Input: 200-500 V AC 50/60 Hz 1.4 A -Output: 24 V 5A -Dimensions: 130/40/H125 mm -Weight: 0.6 kg

machine vice, stable vice, drill press vice -Machine vice: clamping jaws 175 x 50 mm -Clamping depth: 125 mm -Dimensions: 520/200/H125 mm -Weight: 44.7 kg

SPECIFICATIONS max. sanding length mm: 1200 08 Spindle Hp 3.0 01 Engine (hydraulic pump) Hp 3.0 02 Motor Hp 1.5 for rotating brushes Complete with loader Control via 01 copy device in the upper part of the machine Hydraulic drive

Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Collated Fasteners, strip nails 1 box/ 1400 pieces -Type: SNK 2266 3.8 x 120 mm -Price/Delivery: complete -Transport dimensions: 380/200/H130 mm -Total weight: 15.4 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 125 mm -Type: B2-50/32x125 TGL10906 -Piston rod: Ø 32 mm / M18 -Holes: Ø 30 mm -Dimensions: Ø 80 x 375 mm -Weight: 6.3 kg

Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=120x320 -Dimensions: see photo technical drawing -Number: 1x axle available -Dimensions: Ø 120 x 320 mm -Weight: 25 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -V-block: for marking plate, clamping plate, straightening bench... -Prism width: 115/23 mm / 121° -Dimensions: see photo technical drawing -Dimensions: 140/130/H130 mm -Weight: 13.8 kg

Key data: 6400 mm, 1 mm

with the following equipment: Brand new JC100 controller Stop system type 20 conical 5 stop fingers standard Roller Shears SL 1.5 mm Material thickness adjustment type HM per stand dynamic positioning type DP Super High Speed Hydraulics (shs) LED lighting with signal function Safety according to BG Colour RAL 7016 anthracite grey/RAL 2004 light orange Total power requirement 16 A Insertion depth: 1250 mm Roller Shears SL 1.5 mm Number of stands: 6 pieces Opening width: 200 mm Bending angle 145 degrees Dimensions: 7800 x 1700 mm Weight: 5300 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 125 mm -Type: B1-50/22-125 TGL 10906 -Piston rod: Ø 22 mm / M18 -Hole: Ø 32 mm -Dimensions: Ø 77 x 345 mm -Weight: 5.2 kg

Motorized Rounding Machine Foot Holder one. Rear angle infeed Emergency stop leash very good condition Colour: grey Total power requirement 16 A Shaft diameter: 65 mm Capacity: 1020x1.5 mm Weight: 300 kg Machine number: 05 125 001 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 125 mm -Type: B2-40/18x125 Pn16 TGL 29017/5/ -Piston rod: Ø 18 mm / M16 -Holes: Ø 20 mm -Dimensions: Ø 340 x 60 mm -Weight: 3.2 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 120 mm -Type: unfortunately without type designation -Piston rod: Ø 25 mm -Hole: Ø 20 mm -Number: 2x cylinders available -Price: per piece -Dimensions: Ø 60 x 300 mm -Weight: 4.0 kg/piece

Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder -Holder: for pull and lead screw -Dimensions: see photos -Transport dimensions: 160/120/H400 mm -Weight: 14.7 kg

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helmet, running rail helmet rail -Type: Profile 500 -Length: 125 mm -Dimensions: see photos -Quantity: 1x helmet rail available -Dimensions: 125/65/H60 mm -Weight: 0.7 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1400 mm -Cross-section: 125 x 45 mm -Recording: see photos -Transport dimensions: 1520/560/H125 mm -Total weight: 148 kg

Suspension clamp, clamping sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder, line trolley -Cable trolley: Heavy-duty cable trolley, 2 pieces -Submission/Price: complete -Dimensions: 135/126/H88 mm -Weight: 1.2 kg

Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder, cable trolley, rail clamp -Rail clamp: 2 pieces -Type: Item no. 2 55528 Y8 2 55528 Y12 -Dimensions: see photos -Shipping/Price: complete -Dimensions: 115/120/H100 mm -Weight: 2.5 kg/piece

New repair kit for a Volvo Penta TMD 122A cooling water pump List price of the package 650,-€ consisting of the following parts: 1 Piece Repair Kit 8767628 1 piece gasket 862596 1 piece gasket 422171 1 piece gasket 423351 3 pcs hexagon screw 955542 10 pcs hexagon screw 955536 1 piece plug 968146 2 pieces of V-belts 966959

Micrometer screws, micrometer screws, outside micrometers -Micrometer: outside micrometer -Measuring range: 100-125 mm -Reading: 0.01 mm -Locking device -other sizes: also available -Case dimensions: 320/180/H40 mm -Weight: 0.9 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with groove, solid design -Groove width: 24/31 mm -Dimensions: see photos / technical drawing -Dimensions: 150/120/H95 mm -Weight: 7 kg

Automatic controlled guillotine cross knife Consistent high throughput Chamber length: 620 mm Chamber cross section: 120 x 120 mm

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 30-39 mm -Type designation: not available -Dimensions total Ø 180 x 75 mm -Weight: 5.9 kg

table length: 1200 mm table width: 800 mm table height: 800-975 mm table load capacity: 250 Kg weight of the machine ca.: 150 Kg dimensions: 1,2 x 0,8 x 0,85 m Special price! Siegmund workbench Perforated plate made of high-quality steel S355J2+N + plasma nitriding - 16 mm bore - Surface holes in 50x50 mm grid - Material thickness approx. 12 mm - Height-adjustable feet for working height in the range of 800 to 975 mm - Frame made of aluminum profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,25 mm throat: 130 mm roll diameter: mm total power requirement: 0,75 kW weight of the machine ca.: 180 kg dimensions of the machine ca.: 1,1 x 0,6 x 1,2 m Flanging machine is equipped with: - Emergency switch - Footswitch - 8 pcs. Roll sets The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 50-60 mm -Type designation: not available -Dimensions total Ø 180 x 90 mm -Weight: 8 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 49-64 mm -Type designation: not available -Dimensions total Ø 210 x 125 mm -Weight: 10.9 kg

Transnorm belt curve conveyor right 30°-1270-1100-IR900 RA2302 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,4 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 1270 Belt width in mm: 1100 angle: 30° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive ...

• Set up for ALU/ALU operation and ALU/PVC • Format range blister (W x L) min 50 x 22 mm / max. 156 x 115 mm • Drawing depth max. 18 mm • Output 15 - 50 forming cycles/min • Transport length 42-115 mm • Film width 100-168 mm • Forming film Ø max. 450 mm, core Ø 76 mm (PVC) / 150 mm (ALU), mech. clamping • Cover film-Ø max. 240mm, core-Ø 76 mm, mech. tensioning • Splice Detection • Film feed after forming and sealing • \kerning2 Print mark control\kerning0 • \kerning2 Film stretching unit\kerning0 • Pin hole detection for form foil and lid foil, Visiotec VisioScan MT-160/200 • Without Heating plate station for PVC (can be delivered later upon request for extra charge) • Forming station with compressed air for PVC form foil, pre-equipped for pre-stretching die • Mechanical forming station for ALU forming foil • \kerning2 PLC Beckhoff IPC, Servo control ...

Water pump, new suitable for MAN D2842, cf. original MAN number: 51.06500.6470

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers -Machine transport roller: armored rollers 2 pieces -Load capacity: kg -Shipping/Price: complete -Dimensions: 220/120/H75 mm -Weight: 7.7 kg/piece

power converter, power supply, power supply, switching power supply, power supply module, DIN rail power supply -Manufacturer: Mean Well, Wilo DIN rail power supply -wilo: Type CR-NT 12V DC -Input: 100-240 V AC 50/60 Hz 1.8 A -Output: 12 V 1.67 A -Dimensions: 100/25/H90 mm -Weight: 0.1 kg

Castor, swivel castor, transport equipment castor, fixed castor, heavy-duty castor -Swivel castor: solid rubber with steel rim, 2 pieces -Load capacity: 100 kg -Wheel: Type 125/37.5-50 Ø 125 mm -Width: 37 mm -Shipping/Price: complete -Dimensions each: 140/105/H155 mm -Weight: 1.2 kg/piece

Control: Siemens 840 D powerline Accessories: Tool holder bar loading magazine Fully functional and still under power, can be visited at any time

Budde telescopic roller conveyor 5150-12000-600 RA2081 The two telescopic elements of the telescopic conveyor can be manually extended or retracted using a hand crank. Attention! ONLY suitable for truck loading Year of manufacture: 2002 Condition: function-tested, used Optical: Signs of use Base part with double supports: 800 mm height Telescopic elements 2 pieces: manually extendable and retractable Telescopic extension/retraction: hand crank on the operating side Accumulation effect: Accumulation with inclination running upwards Technical data: Stationary part Length: 5150, + 6850 mm Extendable parts Roller width: 600 mm Outer width: 850 mm Height 1 transfer: 800 mm, 1020 with crank handle - Loading e.g. via customer conveyor belt Galvanized rollers diameter 50 mm Roller pitch: 80 mm Operation/crank: front side Self-retaining crank Color: Grey Supports: 2 rigid double supports Base pl ...