deutz bf 12 used for sale

Collecting pan, floor pan, collecting container, flat steel pan, collecting pan for coolant liquid -Collecting tray: for chips with coolant liquid, 1200 x 800 mm -Trough height: 400 mm, can be shortened -Rectangular cutout: 420 x 215 mm -Dimensions: 1200/800 / H400 mm -Weight: 10 kg

2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns -Mounting: Bolt Ø 40 mm -Die stamp: see photos -Dimensions: 690/290/H290 mm -Weight: 61 kg

Bending tool, die, lower tool, die tool, hemming tool, press tool, forming tool, clamp pressing tool, upper tool -Die tool: Forming tool / press tool -Socket: Ø 40 mm -Print area: 125 x 15 mm, see photo techn. drawing -Dimensions: 125/50 / H163 mm -Weight: 4.3 kg

Heating, gas and oil burners, burner control, burner flap control, flue gas flap control -Burner control: Flap control burner -Type: unfortunately no type designation -Shaft: Ø 12 x 25 mm -Hole spacing: 50/65 mm M6 -Dimensions: 120/120 / H140 mm -Weight: 1.5 kg

Pneumatic Cylinder, Air Cylinder, Pneumatic Stamp, Air Stamp -Pneumatic cylinder: stroke 125 mm -Piston rod: Ø 10 mm M10 -Dimensions: 267/35/H55 mm -Weight: 0.4 kg

Mounting plate, plate field, aluminum plate -Mounting plate: made of aluminum, with threaded holes -Sheet thickness: 25 mm -Threaded holes: M12, spacing 100 mm -Dimensions: see photo technical drawing -Overall dimensions: 1290/800/H120 mm -Weight: 65 kg

-Spiral mixer Diosna SP 120 D -Type: SP 120 D -mobile -for max. 75kg flour or for max. 120kg dough -with 2 automatic timers -Boiler diameter 75cm -Boiler capacity approx. 180 liters -Machine mobile on castors with a swivel castor -Locking by 2 brakes -Spiral and kettle made of stainless steel -400 volt frequency 50 Hz -Weight of the machine approx. 550 kg -Boiler capacity: 180 liters

Gear, cogs, gear shaft -Gear shaft: helical -Diameter: Ø 127 mm -Tooth width: 83 mm -Dimensions: see photo techn. drawing -Total dimensions: Ø 127 x 450 mm -Weight: 25.5 kg

Flame cutting machine, plasma torch -Designation: Plasma Electrode Hypertherm 043 020415 -Diameter: 13mm -Length: 41mm -Number: 1 piece available -Total weight: 0.05kg

Flame cutting machine, plasma torch - Designation: plasma electrode Hypertherm 402 120667 -Max. Load: 200 A -Diameter: 13mm -Length: 41mm -Number: 9 pieces available -Price: complete -Total weight: 0.45kg

• Type: VMS 350 • Machine No.: 2934/2 • Sawing speeds: 17/34 m/min. • Mitre: up to 60° right • Stop: approx. 1000 mm • Power: 3x400V, 50Hz/5A • Dimensions (LxWxH): 700 x 700 x 1800 mm • Weight approx: 350 kg • Year of construction: 2001 • In operation since: 1.3.2002 • Accessories: stop approx. 1000 mm, saw blades and cooling water pump

Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: Hypertherm 120182 plasma nozzle -for: Hypertherm HT2000 -Number: 2 available -Price: complete -Total weight: 0.2kg

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water reservoir -Pump: Manufacturer Elpu Type N 120 -Power: 0.085 kW -Speed: 2800 rpm -Dimensions: 570/540/H370 mm -Weight: 24 kg

Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Manufacturer: Festo, standard cylinder type DN-125-250 S6 PPV -Stroke: 250mm -Piston: Ø 125 mm -Piston rod: Ø 32 mm / M24 x 2 -Max. Pressure: 10 bars -Dimensions: 530/140/H140 mm -Weight: 12.7 kg

Vacuum cutter VK 125 STL bowl 125 l, knife speed from 300 to 4200 rpm., Ejector hydraulic, without feeding, 6 cutter head, Busch vacuum pump, connected load approx. 40.0 kW Vakuum bowl cutter VK 125 STL,, Bowl volume 125 l, knife speed from 300 till 4200 rpm., unloader, without loading system, knife head with 6 knives, Busch vacuum pump, Power approx. 40.0 kW

Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, press cylinder -Manufacturer: Hänchen, hydraulic cylinder type 120 10100-01 -Piston: Ø 60 mm -Piston rod: Ø 30 mm / M24 x 1.5 -Stroke: 50 mm -Max. pressure: 150 bar -Dimensions: Ø 95/270 mm -Weight: 9 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 100 mm -Dimensions: see photo techn. drawing -Dimensions: 250/120/H63 mm -Weight: 10 kg

Engine: 160.0 kW Rotor diameter: 800 mm Rotor width: 1200 mm

V-belt pulley, pulley -V-belt pulley: single-groove pulley Ø 125 mm -V-belt width: 13 mm -Receptacle: Ø 24 x 32 mm -Quantity: 7x pulleys available -Price per piece -Dimensions: Ø 130 x 32 mm -Weight: 0.7 kg/pc.

V-belt pulley, pulley -V-belt pulley: single-groove pulley Ø 125 mm -V-belt width: 13 mm -Receptacle: Ø 30 x 32 mm -Quantity: 4x pulleys available -Price per piece -Dimensions: Ø 130 x 32 mm -Weight: 0.7 kg/pc.

Slewing bearings, slewing ring, single-row ball bearing, four-point contact bearing, gear ring, steering ring, -Slewing bearings -Type: Drawing No. 281.30.1200.013.11.1503 -Dimensions: see photos -Dimensions total: Ø 1395 x 90 mm -Transport weight: 240 kg

-2 lifting mixers with extendable stainless steel kettle -2 machines with 4 boilers -Manufacturer: Emil Kemper GmbH Conversion of Meyma -Model: F125ALS -a cauldron for max. 125 kg of flour or for max. 200 kg of dough -with 2 speeds -optionally also with lifting tipper

Transnorm roller conveyor TS 2800 sorter switch 1980-1250-1150 RA1999 Make: Transnorm Roll width (RB): 1150 mm Nominal/outer width (NB): 1250 mm Length: 1980 mm Diameter rollers: 50 mm distance between rollers: 76 mm Roller conveyor motor: 2x SEW drive motor Angle of the rollers is adjusted pneumatically (see pictures) conveying speed: approx.1,73m/s maximum recommended box/package width: 400 mm Theoretical sorting speed at 600 mm crate length: ca. 4250/h Included: Side guide included on one side Control valve Optionally available: Supports Side guides on both sides Conversion to box width up to 500 mm Barcode scanner Control system (stand-alone unit) System optimization (e.g. replace valves, dual solenoid valve, forward conveyors, frequency converter) for higher flow rate 6000 and more Features: For individual, expert advice, simply get in touch with us. Simply contact us by phone or ...

Spiral wound gasket, labyrinth body gasket, flange gasket -Spiral seal: Flange seal according to DIN EN 12560-2 5 pieces/package -Type: 2 1/2 150lbs 1.4404/PTFE -Dimension: Ø124 x 2mm -Price: complete -Total weight: 0.7 kg

Control: Heidenhain Mill plus Max.travel range: X 1250 mm Y 1000 mm Z 1000 mm B -30? / +180? C nx 360? Clamping table: 1000 x 800 mm Spindle speed ? 10000 rpm Taper ? HSK 100 Tool changer ? 120 positon Twin Pallets Coolant tank: 2000l machine

Control: Mill plus Max.travel range: X 1250 mm Y 1000 mm Z 1000 mm B -30? / +180? C nx 360? Clamping table: 1000 x 800 mm Spindle speed ? 10000 rpm Taper ? HSK 100 Tool changer ? 120 positon Twin Pallets Coolant tank: 2000l machine has spindl

ID2955 Key Maker Magic 1211 year/Year of construction 1984 Manhole finisher, 1 piece Magic 1211, with 2 Atlas 300 + 400 molds, 2 palisade molds, 1 built-in mold, 1 vibrator incl. FU, various base sleeves Shaft paver, 1 piece Magic 1211, with 2 pieces of moulds Atlas 300 + 400, 2 pieces of mould palisades, 1 piece of mould installed, 1 piece of vibrator incl. FU, various lower sleeves

Control unit, control element, interface, drive control, drive current control, high-performance pulse control, pulse control -Manufacturer: GSL (German Standard Lift), high-performance impulse control for driving work platforms -Type: 1204-406 -Voltage: 36-48 V -Dimensions: 195/145/H75 mm -Weight: 2 kg

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Hydraulic reservoir: from Butler 1200 pallet jack -Contents: approx. 11 liters -Additional parts: see photos -Dimensions: Ø 210 x 580 mm -Weight: 11 kg

Workbench, work table, assembly bench -Workbench: with drawers, solid construction -Width: 1250mm -Depth: 600mm -Height: 775mm -Drawers: 3, lockable / without lock -Weight: 75 kg

Spiral spring, steel spring, compression spring, round wire spring -Coil spring: steel spring -Diameter: Ø 125 mm -Length: 265 mm -Wire thickness: 19 mm -Number: 2 springs available -Price: per piece -Weight: 6.4 kg/piece

MALMEDIE DIE Adjustable drawing speed with inverter • Minimum worked diameter 15 mm • Maximum worked diameter 25 mm • External dimension coils 1,250-1,300 mm • Internal dimension coils 800-900 mm • Length 700-1,300 mm • Weight 1.500 Kgs • Wire surface treatment bonderized with soaped • Tensile resistance approx 500 N/mm2 The drawing machine normally work the raw material over mentioned with the follow specification: • Number of drawing passage 1 • Drawing die sizes 120x45 mm • Lubricant now used oil • Max area reduction 6 to 8 % • Drawing speed adjustable with inverter

Transnorm belt conveyor belt conveyor 1252-600-500 gate passage RA2049 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1251 mm nominal/outer width (NB): 600 mm 735 with barings belt width (GB): 500 mm overall height (BH): 85 mm motor height (MH): 110 mm Motor type: Van der Graaf drum motor Motor power: kW 0.25 230/400 V 50Hz Conveying speed: 1,25 m/s Scope of delivery: without supports (if required, please ask) Optional: Supports with dempers Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co.  ...

Transnorm belt conveyor 1200-600-500 RA1987 Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1200 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: SEW-Eurodrive Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 1,6 m/s Weight: 60 kg Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: 1,6 scope of de ...

Spiral spring, steel spring, compression spring, round wire spring -Spiral spring: steel spring -Diameter: Ø 123 mm -Length: 260mm -Wire thickness: 19 mm -Number: 1x springs available -Price per piece -Weight: 5.6kg/pcs

Offer 23443 Specifications: - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30° - Cutting gap adjustment by hand - Projection 200 mm - Man.- Back gauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirements incl. back gauge -ca. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 120 x 40 mm Truss Type: TRV1-290-124-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,100 kg, with the same weight. Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the pla ...

Kemper Spiral Kneader Type: SP 125 A Specifications: 2 automatic timer switch-on and switch-off 2 speeds slow and fast with 3 stainless steel boilers Stainless Steel Boiler and Spiral with flour dust cover square head Boiler capacity approx. 250 litres Machine has been overhauled and repainted Electronics new All bearings new All straps new New friction wheel Wear parts all new Engine mounts all new Push button new Rollis new Hydraulic oil new completely repainted

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 41 mm -Groove width: 25/22 mm -Dimensions: 150/120/H218 mm -Weight: 9.7 kg

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 120 x 50 mm Truss Type: TRV1-290-125-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,200 kg, with the same weight Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on th ...

Used candle filter - sanitary made by Cerfiltr type FHC - STC - 12SF30T80. New 2021. The filter is used for water sterilisation. Plus a set of cartridges (extra charge). Little used.

Key data: 6 mm

Type : K 30 – 120 Specifications: Sheet thickness 6 mm at 400 N/mm² 4 mm at 600 N/mm² Cutting length 200 mm Angle adjustment from 30 - 120 ° Drive power approx. 4 KW

This cooling tank from Primac is in machine storage at Plastima Used Machinery. The Cooling Tank is from 1994 and is in great condition. - Brand: Primac - Model: CV.2C. 125/6 - Pipe diameter max: 125 mm - Cooling length: 6000 mm - Year of construction: 1994

With Jagfeed and Jackpack 40-2 Delivery

Excavator mats, rubber excavator mattresses, excavator protection mats, rubber protection mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt -Silicone mat: can also be cut to size for use as a conveyor belt -Width: 1210 mm -Length: 1250 mm -Dimensions: Ø 100 x 1210 mm -Weight: 3.4 kg

Workbench, work table, assembly bench -Workbench: with drawers, solid construction -Width: 1255mm -Depth: 700mm -Height: 880mm -Drawers/cabinet doors: each 2x, lockable/without lock/key, see photos -Weight: 98 kg

Gratings, grating, light grids, grid inserts, grid inserts, stair steps, security steps, grating step, step -Grid step: 1200 x 240 mm -Total height: 70mm -Struts: wall thickness 2 mm -Bridge height: 40/10 mm -Gratings: hot-dip galvanized -Number: 6x grids available -Price per piece -Weight: 8 kg/pcs

Transnorm modular conveyor with combiner conveyor belt GF 2500-1300-1200 RA2230 Merging of two belts into one Technical data: Conveyor length (NL): 2500 mm Frame width (NB): 1300 mm, 1600 mm with motor Belt width (GuB): 1200 mm Overall height (BH): 80 mm, 430 mm with motor at the bottom, approx. 1000 mm with motor at the top Scraper height: 190 mm (without motor) Belt width/height scraper: 180 mm Support feet: optionally available Conveyor speed (v m/s): 1 Drive: SEW geared motor, R17 DT80N4 Electrical data: 50Hz V380-500, kW 0.75 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length ...

DMWM TEM IGNITION SYSTEM TEM-ZS1 Ignition device DeutzMWM Part No. 12298101

We offer for sale 20 pieces of spark plugs Jenbacher Part No. 1214569