137,514 used machines on RESALE, but how to find them? Machine Search
Stick electrodes 2.5 x 250 -Type: Phoenix 120K -Price: per package -Number: 16 packages available -Weight per package: 3.3 kg
Agilent 1200 HPLC system consisting of: Agilent 1200 G 1312B SL binary HPLC pump (up to 600 bar) Agilent 1200 G 1315B Diode Array Detector Agilent 1200 G 1316 B TLC SL Colcom/column thermostat Agilent 1200 G 1379 Degasser Agilent 1200 G 1330 Thermostat for Autosampler Agilent 1200 G 1367D Autosampler Hip ALS SL + on request with Agilent Chemstation/Warranty
Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 120 mm -Admission: -Drawing: in the photos -Dimensions: 200/70/H130 mm -Weight: 4 kg
Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Outer frame made of: galvanized sheet steel -Dimensions: 1575/1275/H175 mm -Weight: 50 kg
Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter -Manufacturer: INFRANOR -Type: SMD 101/120 -Servo drive -Number: 1x control cards available -Price: per piece -Dimensions: Servodrives -Weight: 0.4 kg
Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-slot plate comes from: a WMW drilling machine -Travel: approx. 1200 mm -Clamping plate width: 1405 x 1250 mm -Dimensions: 2900/1350/H940 mm -Weight: approx. 1200 kg
Sputter target, tube, pipe -Pipe dimensions: Outer: Ø 152 mm Inner: Ø 125 mm Total length: 3249 mm -Number: 2 pipes available -Price: Complete -incl. transport crate -Box dimensions: 3600/570/H585 mm -Weight: 306 kg
Front broom, front sweeper, roller brush, broom -suitable for: Kramer Tremo, Multicar, Iseki, Hako and other tractors -was in use: at Berlin Airport -PTO drive: -hydraulic: swiveling -Admission: three point -hydraulic: swiveling -Broom width: 2000 mm -Dimensions: 2100/1070/H1060 mm -Own weight: 310 kg
Platform trolleys, transport trolleys, heavy trucks, table trolleys, assembly trolleys -Angled iron frame -Push-in sleeves at each corner -Heavy load transport trolley -Load capacity: 200 kg -Number: 20 pieces available -Price: per piece -Dimensions: 715/1210/H325 mm -Weight 34 kg / piece
Micrometer, micrometer screw, measurement of tooth width, plate measuring surfaces -Measuring range: 100-125 mm -One revolution of the drum corresponds to: 0.5 mm -without locking device -large measuring areas -Measuring force: ratchet -Including case Setting mass -also other sizes available -Weight: 1.0 kg
Clamping plate, welding table, welding table, straightening plate -Width: 1210 mm -Length: 4000 mm -Height: 830 mm -Sheet thickness: 30 mm -with steel frame -Number: 2x plates available -Price: per piece -Weight: 1400 kg/piece
Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 810 mm -Length: 1205 mm -Working height: 820 mm -with supporting ribs -Sheet thickness: 25 mm -Weight: 260 kg
Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 125 mm -Height: 30 mm -Socket: Ø 30 mm -Number: 1 cutter -Price: complete -Weight: 2.2 kg
Lifting mixer, Diosna Type S 120 a, extendable
Matrices for single and double clippers 12974 21691 48158 73526 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
1 used pallet box Make: Purus Plastics Type: Fidus Vario Box 1208 Material: PP Overall dimensions: approx. 1,200 x 800 x 975 mm with 4 module attachments pluggable Height 200 mm each Weight: approx. 50 kg Static load: 4,000 kg Dynamic load: 1,600 kg Load high rack: 1,000 kg In total, there are about 100 pieces for sale. Price per piece: EUR 150,00 / net VAT invoice. Conditions: Self-collection by telephone arrangement from location 53783 Eitorf. Pick-up times: Mon-Thu: 09.00 a.m. - 05.00 p.m. Friday: 09.00 am - 01.00 pm Shipping by forwarding agent possible. The shipping costs are borne by the recipient. An offer is made after specifying the postal code.
Manufacturer: TREIF Type: PUMA CE 700 EB Product holder with 45 catchers / teeth / for PUMA CE 700 EB, Art. No. 124777 Dimensions: L 180 x W 185 mm Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl
Lippert belt conveyor GF 1285-650-500 RA1378 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1285 mm Frame width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection drum: Ø = 64 mm Drive drum: Ø = 81 mm Belt type: SNB 8 E year of construction: 2001 Optionally ...
Capacity: 1 200 T, Total stroke: 500 mm, Stroke of main crank shaft: 318 mm, Stroke of mobile die: 215 mm, Stroke/min: 27, Bar diameter: 50-90 (150) mm, Max diameter of peace: 152mm, Max weight of piece: 5 kg, Main motor power: 75 KW, Area of machine : 6400 x 4420 mm, Hight of machine: 3830 mm, Weight: 128.0 T
Transnorm Rising falling Incline with arch and forerun belt conveyor GF 12965-700-600 RA2076 Technical data: Conveyor length (NL): 12965 mm (3000 mm forerun + 6865 mm incline + 3100 mm arch) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, R27 DRE80M4BE1/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 12965 Nominal / outs ...
Lippert belt conveyor GF 1290-650-500 RA1392 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1290 mm Frame width (NB): approx. 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 ...
Data sheet of retrofit POS. GE 20.25 Gebhardt roller conveyor (without drive), FB = 1,260 mm, 2000 mm = FL Type. Gebhardt roller conveyor type 330.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Net weight: 25 kg/m = G Length: FL = 2.000 mm Conveyor width: FB = 1.260 mm Overall width B = FB + 60: B = 1,320 mm Side profile: Aluminium Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Support: ask without support, if needed Condition: functional and visually good condition Features: Construction year: 2007 condition: good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 1320 Roll width in mm: 1260 Roll division in mm: 100 Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfa ...
Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 1800-1220-550 RA1148 year of construction 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 / 1300 mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. Brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 1800 Nominal / outside width in mm: 1220 Roll width in mm: 550 Driven: YES Conveyor speed m / s: 0,35 For individual, professional advice, simply cont ...
Proofer Hein GR255-122 Proofer Space for 3 racks or a bread trolley Width 1.22m Height 2m with superstructure 2.3m Depth: 2.55m Manufacturer: HEIN Type: GR255-122 Year of construction: 09-2016 complete with proofing chamber air conditioner
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 124 mm -Edition: gray cast iron -Hole spacing: 335 mm -Tip height: 215 mm -Drawing with the photos -Dimensions: 380/90/H400 mm -Weight: 14 kg
Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: TA 8.5 Nm -Speed: 500 rpm -Shaft: Ø 24 mm -Construction: B3 -Number: 3x available -Price: per piece -Dimensions: 320/235/H185 mm -Weight: 23 kg
The inclination scale is fully functional. The scope of delivery includes: 01x Inclination scale, used Manufacturer: Rapido-Werke Dimensions: approx. 1,250 x 1,360 x 2,250 mm (WxDxH) Maximum load: 750 kg Feet: 04x / height adjustable with tare compensation Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.
Replacement blades for cutting machines -Manufacturer: Stumabo -Blade size: 127x25.4x1.5 2GØ10.4 (90°) -Quantity: 25x available -Price: per piece -Minimum order quantity: 3 pieces -Weight: 25 g
Rotary table, rotary indexing table, dividing head, dividing head -Chuck size: 125 mm -Feed: Rohm -Division: 12 -Height: 300 mm -Dimensions: 170/170/H300 mm -Weight: 19 kg
Tool holder, milling holder, milling tool -Adjustment: SK50 -Test pin: 50 x 125 mm -Number: 1x recordings available -Price: per piece -Weight: 4.6 kg/piece
Coating roller machine, roller application machine -Transfer in current condition as seen -Manufacturer: Giardina -Max. Width: 1260 mm -Casting gap: adjustable -with: 3x brush units -Connection power: 11 kW -Dimensions: 4600/2360/H1600 mm -Weight: approx. 4000 kg
Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 120 mm -Edition: ball bearings -Hole spacing: 350 mm -Tip height: 210 mm -Drawing with the photos -Dimensions: 395/85/H400 mm -Weight: 14 kg
maximum number of results exceeded
please refine your search
