deutz ag used for sale

Refurbished 2022 Travel distances: X= 350 mm, Y= 250 mm, Z= 256 mm Travel of U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 (150 in the bath) mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.30 μm Medium contour tolerance: +/- 6 μm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with autom. Wire threading and rethreading after wire breakage

This 4-axis +GF+ AgieCharmilles FO 350SP die-sinking EDM machine was manufactured in 2013. It features a stable EDM generator, a fully operational 360° C-axis with a rotational speed of 100 rpm, and a substantial work area of 800 × 550 × 370 mm. Well-maintained and operational until its last day, consider the opportunity to buy this +GF+ AgieCharmilles FO 350SP die-sinking EDM machine. Contact us for more information about this machine.

Agfa Elantrix 125 SX Plate Developing Machine; cleaned and tested; incl. Scrub Kit; suitable for thermal plates; max. Panel width 1250mm, min.200mm; min. Panel length 300mm; Plate thickness 0.15-0.40; Cooling. Plate processor Agfa Elantrix 125 SX; cleaned and checked; included scrub kit; used for thermal plates; max.plate width 1250mm, min.200mm; min. plate lenght 300mm; plate thikness 0.15-0.40mm; Chiller.

Agfa Elantrix ST 125 SX Pressure Plate Stacker; cleaned and tested; Panel width 300-1250mm; Panel length 275-1470mm; Panel speed 400-2500mm/min.; Printing plate trolley. Plate stacker Agfa Elantrix ST 125 SX; cleaned and checked; plate width 300-1250mm; plate lenght 275-1470mm; plate speed 400-2500mm/min.; plate trolley.

Agfa Acento S + Agfa Azura 95 thermal laser technology 830 nm production speed 20 plates / hour plate thickness from 0.15 to 0.3 mm 32 laser diodes software RIP Agfa ApogeeX

Machine Group: Single Column Eccentric Press 25 to Make: Colombo Agostino Type CA.25.V Year of Make: 1988 Control: conventional

vibratory feeder diameter range 8-16 mm shaft length under head 150 mm max. thread length 83 mm output pieces/min 120

High-frequency ignition device, heating, gas and oil burner, automatic burner control, gas relay, control box, burner control, burner management, UV flame simulator, ignition transformer, pressure monitor, pressure switch, mains transformer -Manufacturer: Siemens, power transformer for LMV5 system -Type: AGG5.210 -Voltage prim: 120 V -Number: 2x transformers available -Price: per piece -Dimension: 120/85/H80 mm -Weight: 0.3 kg/piece

Scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table, flat form lift table -Manufacturer: Edmolift, scissor lifting table flat-form lifting table type TUB 600 and agg -Load capacity: 600 kg -Platform: approx. 1450 x 900 mm - Dimensions retracted: height 85 mm -Dimension extended: height 800 mm -Lifting time: approx. 13 seconds. -Quantity: 1x lifting table available -Price per piece Transport dimensions: 1480/930/H260 mm -Weight: 212 kg with pallet

Pump controller for centrifugal pump, high pressure pump, water pump, multi-stage vertical centrifugal pump -Manufacturer: Pentair Jung Pumpen, alarm device with ball immersion switch, unused in original packaging -Type: Alarm device AG10 JP44892 -Ball immersion switch: KT JP 46208 -Quantity: 2x alarm devices available -Price per piece -Dimensions of box: 270/250/H140 mm -Weight: 2.0 kg/pc.

General SKU440W1452 MakeAgilent Technologies Type1100 series No.DE43628255 Year of construction2005 LocationBarneveld Specified Features - Miscellaneous Capacity100x 2 ml vials in 1 tray, 40x 2 ml vials in 1/2 tray, 15x6 ml Information Floor space1,00x0,60 m Total height0,80 m Weight100 kg CEcheck Extra SpecificationsHPLC with autosampler. UV-visible detectors, pumping system, fluorescence detector, LC/MSD unit, refractive index detector, GPC/SEC system, Micro plate sampler, 220, Chem station : all product nrs: G1314A G1312A G1379A G1316A G1367A G1330B IsolatorsAgilent TechnologiesLaboratory Equipment > IsolatorsBrand > Agilent Technologies What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please ...

TECHNICAL DATA: Working area: 1200 x 800 mm 3 flywheels: Ø 600 mm Saw blade length: max. 6970 mm Installed power: 3 kW Cutting height: 630 mm

Key data: 230 KW

Bulbous 2G module Agenitor 306. - Engine: MAN E2876LE302 - Generator: Leroy-Somer LSA46.3L11C6S/4 Power 230KW Year of manufacture 2018 Approx. 35,000 Bh Suitable for biogas, natural gas, sewage gas, wood gas, etc. Interim overhaul was carried out at approx. 30,000 Bh. Complete module - Incl. control cabinet - Incl. load cabinet - Incl. power cable - Incl. oil volume expansion - incl. gas section More pictures on request.

Agilent HP 6890 Gas Chromatograph (G1530A) FID + G1888 Headspace Sampler + G1512A Controller + G1513A Autosampler Composition: Gc 6890 agilent Hewlett packard G1530A network headspace sampler G1888A Injection Turret 6890 - G1513A G1512A controller With software With accessories Without a computer Warning, equipment not tested Buy as is

BOD Measurement OxiTop IS-12 BOD Meter with WTW Induction Shaker Scale: 0 to 4000 mg/l 5-day data collector Automatic start as soon as the temperature reaches 20°C Operating temperature (metric): 5°C to 50°C Included: Inductive stirring system IS 12 12 OxiTop Units of Measure Universal power supply 12 sample vials 12 rubber sleeves 12 Stirring Bars Container with measuring head Agitator

Manufacturer: Keyence Model: Agilista 3200W Input Voltage: 100-240V AC, 50/60Hz Power Consumption: 750 VA Certification: CE Find more here - / Contact us at -

AGFA Avalon N4-30 (Screen PT-R 4600 S) year 2016 32 diodes 21 plates/h exposure time 23,920 h Running time 35,300 h plate loader without RIP plate processor Glunz&Jensen Quartz III 85 year 2012

An inkjet-based industrial PolyJet/material jetting 3D printer Keyence for photopolymers is available. Build volume dimensions X/Y/Z: 297mm/210mm/200mm, resolution: 635dpi/400dpi, XY resolution: 63.5µm/40µm, layer thickness range: 15µm-30µm, machine dimensions X/Y/Z: approx. 950mm/700mm/1400mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible.

2 G / Liebherr, 400 V / 50 Hz, 26000 hrs since revision, KWe: 360, Working hours: 26000

CONTROLS   CNC controls WORKING RANGE -WIRE CUTTING-   X-axis travel: 500 mm   Y-axis travel: 350 mm   z-axis travel (vertical): 426 mm   conical operation for max.: 30 °   U-axis travel: 140 mm   V-axis travel: 140 mm WIRE SYSTEM   wire diameter (min): 0.15 mm   wire diameter (max): 0.33 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1940 mm   space requirements -front/back-: 2300 mm   total height: 2600 mm   total weight approx.: 4200 kg

Agilent G1811A XY Autosampler Autosampler Type: XYZ Robot with Stationary Rack Design Needle positioning performance: X, Y, and Z resolution: ±1 mm X, Y and Z repeatability: ±0.25 mm X- and Y-axis arm speed: 250 mm/s Z-axis: 126.9 mm/s Rack Capacity: Up to four 21 Series racks Dimensions: 21" W x 17" D x 14.5" H (53.5 × 44 × 37 cm)

number of spindles:8 spindle passage:20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AG20 Yob: 2002 eight-spindle automatic lathe 8 main spindles for bars up to D=20mm control: Siemens 840D 1x polygonal turning/thread milling device (new 2011) 1x polygonal turning/thread milling device for long turning (new 2011) 1x thread cutting/quick drilling spindle (new 2011) 1x pick-up device incl. various pick-up collets 4 cnc-cross slides Double cross slide in position 7 Loading magazine PRA 52/P type 33 (bar length 3m), year 2004 High-pressure system Knoll SF 2000/Turbo-3 up to 100 bar, year 2004 Tool monitoring Brankamp Air conditioning unit Rittal in the front switch cabinet incl. spare parts package with various collets, cams and various tool holders for longitudinal and cross slides The machine has been run with oil and has processed brass Please, con ...

Deutz Zylinderköpfe im Tausch komplett mit neuen Ventilen,Sitzringen+Führungen info@miw-zeven.de

Deutz Zylinderköpfe im Tausch komplett mit neuen Ventilen,Sitzringen+Führungen. info@miw-zeven.de

Deutz Zylinderkopf im Tausch BFL913C-dicke Kopfdichtung komplett mit neuen Ventilen,Sitzringen+Führungen. alle Preise per Stück zuzügl.gesetzl.Steuer.Preisänderungen vorbehalten. info@miw-zeven.de

Deutz motor BF4M1013E in exchange with warranty,immediately available from stock. Engine KHD-AT delivery status is delivered. info@miw-zeven.de

Motor im Tausch in KHD-AT-Lieferumfang BF4M1013E mit Garantie ab Lager sofort lieferbar für 12 Volt,24Volt sowie Liebherr Ausführung vom Preis abweichend. info@miw-zeven.de

Zylinderkopf im Austausch DEUTZ BF4M2012/C komplett überholt mit Ventilen. sofort ab Lager lieferbar info@miw-zeven.de

DEAR'S SALE, COMPLETE DEUTZ 6M628 Std cranksaft OVERHAULED , good condition Brgds Hakan KUSCU +905323642509 info@kscege.com

CPU-P RS-12473959

I/02 MODUL RS - 12470960

I/02 MODUL RS - 12470961

I/02 MODUL RS - 12470962

I/02 MODUL RS - 12470963

I/02 MODUL RS - 12470964

I/02 MODUL RS-1270965

I/02 MODUL RS - 12470966

I/03 MODUL RS - 12501531

I/03 MODUL RS - 12501533

I/03 MODUL RS - 12501535

I/03 MODUL RS - 12501539

I/03 MODUL RS - 12501541

TEM SYSTME SCREEN RS - 12404588

TOUCH SCREEN RS - 12473955

STEPPER RS - 12470917

I/01 MODUL CAMBUS RS - 12404581

I/01 MODUL CAMBUS RS - 12404584

RACK (CPU-1 / CPU-P) RS-12470974

AKR-KNOCK CONTROL RS - 12404594

AKR-KNOCK CONTROL RS - 12473957