127,274 used machines on RESALE, but how to find them? Machine Search
Headers – John Deere 730FD Manufacturer: John Deere Model No.: 730FD Year of manufacture: 2018 Model year: 2019 Working width: 9,100 mm Net weight: 3,344 kg Serial number: 1H0730FDAJ0805002 Type: Draper Cutterbar Transport trolley – Ziegler SWW-4WT Manufacturer: Ziegler Model No.: SWW-4WT Year of Make: 2020 Type: Cutterbar Trolley Permissible. Total weight: 6,000 kg Front axle load: 3,000 kg Axle load rear: 3,000 kg Version: 4-wheel John Deere 730FD (9.1 m) cutting unit including matching Ziegler SWW-4WT transport trolley, built in 2020. Auction-ID: 04L-N1Y-1
The unit is available from approx. mid-June 2026. This is given away free of charge, but must be dismantled and picked up by the buyer. It is functional, is serviced monthly and undergoes a half-hourly test. Filters and operating fluids are changed regularly. The control system was renewed in 2017. The control system, the engine, the unit and the day tank are handed over. The front-mounted cooler remains in our room.
Load sensing for hydraulics Predisposed for a GPS Air co 4 Rear double acting valves 1 Front double-acting dispenser Rear linkage 10 ton 2 Ball Holder Note support of a broken trumpet claxon The brakes are almost new less than 400h Tie . piton . k80 . and bleachers 285 horsepower 50km h Air brake Suspended cabin Auction-ID: A3-43520-35165
McCormick TTX 190 Agricultural Tractor – 4x4 – Full Powershift – Front Suspension Axle McCormick TTX 190 farm tractor in working order, used regularly. Features: Brand: McCormick Model: TTX 190 Years of production: ± 2007 – 2013 Transmission: Full Powershift (32 speeds) Power: ± 180 hp Engine: Iveco 6-cylinder turbo Drivetrain: 4x4 ⚙️ Equipment: Suspension front axle Front linkage PTO Auxiliary hydraulics Rear hitch Front weights Cabin with heating and air conditioning Status and Usage: Hours: 4,263 hours (evolving) Tractor in working order Used until recently Normal wear and tear related to age and use (see photos) Full cab interior Tyres: Front tyres: ±60% Rear tyres: ±30% i️ Additional information: Rear linkage capacity: ± 10,950 kg Max speed: ± 40-50 km/h ⚠️ Notes: Sold in the condition visible on photos Auction-ID: A3-43520-33025
Round distribution table / indexing table (Ageha-Zeatz) with manual operation. Auction-ID: A1-45979-48
5 coulters of reversible plough; body distance 900 mm; ground clearance 800 mm; Stiffener body CV14; Hydraulic side adjustment; Hydraulic frame adjustment during turning; fertilizer depositor; Kombinat rubber for depth guidance and transport; Auction-ID: A1-46030-4
120 hp transmission; Centrifugal motor with 3 suction blades; Skids; Mechanical side adjustment of 260 mm; PTO shaft with friction clutch; Auction-ID: A1-46030-2
Perkins Engine New clutch less than 50 hours of work New front tires New battery Supplied with 2 extra rims and thin tyres Works perfectly Good general condition always maintained properly Auction-ID: A3-43520-36009
4 coulters of reversible plough; body distance 900 mm; ground clearance 800 mm; Stiffener body CV14; Hydraulic side adjustment; Hydraulic frame adjustment during turning; fertilizer depositor; Depth Control Wheel Rubber; Auction-ID: A1-46030-5
Magnificent fully restored Renault 551-4S works perfectly -Replacement of engine electrical wiring and dashboard wiring + preparation for LED turn signal light new grille headlights -New water pump, thermostat block, -battery, - brake pads, - hydraulic sockets, -2 pinions of the inverter. -Oil change -Tank wash - cylinder head gasket -new stabilizer -new tamping of the lift bridge -New headquarters -new exhaust Driveshaft for the 4x4 to be reassembled, so no 4x4. The parts are supplied with the tractor visible in photos. Auction-ID: A3-43520-36010
Agricultural Complete Wheels – 270/95R32 – Adjustable Rims – 8 Holes Used agricultural complete wheelset, including rims and mounted tires. Tire Sizes: 270/95R32 (11.2R32) Brand: Kleber (Super 3 / Cropker type) Adjustable rims allow the adaptation of the track according to use. Features: Mounting: 8 holes Bore: 275 mm Spacing: 221 mm Status: Set in used condition. Presence of oxidation on the rims (see photos). Worn tyres but still usable depending on use. No major structural defects visible. Package Contents: 2 complete wheels (rims + tires) Auction-ID: A3-43520-33055
2 counter discs per rotor; Hydraulic folding; Transfer case 260 hp; 3 rotor gearboxes with 120 hp; Hydraulic Hrizontal adjustment \"Paralift\"; Protective chains with protective flaps; Offset towing eye with K80 coupling; Hydro-pneumatic transport suspension; Ha counter; +Corn mulching kit; Cutting height adjustment by folding wedges; Auction-ID: A1-46030-6
6x50 row cleaner; Special machine for onion and garlic and leeks; Oil drive; Shafts equipped with spring tines are set in rotation by an oil motor and clean in the cultivation row; Auction-ID: A1-46030-8
9x50 row cleaner; Special machine for onion and garlic and leeks; Oil drive; Shafts equipped with spring tines are set in rotation by an oil motor and clean in the cultivation row; Auction-ID: A1-46030-7
rear attachment; Double frame; Adjustable skids; Working width: 2800 mm; 130 hp transmission; Roller; 500 mm side shift hydraulically to the right; Auction-ID: A1-46030-9
Alco food-machines hot air tunnel, type: AGU 600/6000-E, serial number: 02725228, year of construction: 2017, 400 V, 50 Hz, 222 A, 148 kW, weight: 4000 kg, s/s mesh belt, belt width: 600 mm, cooking length: 6000 mm, clearance: 680 mm x 250 mm, total dimensions: 7100 mm x 1900 mm x 2700 mm. Including s/s filter tub.
Good condition Auction-ID: A7-46327-49
Has water in the oil Auction-ID: A1-40136-287
Technical data Manufacturer: AGIE Model No.: EMT 1.10 Machine Type: Die-sinking EDM Machine Year of Make: 1984 Weight: approx. 420 kg Max. workpiece size: 420 x 250 x 160 mm Travel X/Y/Z: 250 x 160 x 200 mm Generator power: up to 30 A Voltage: 220 / 380 V Frequency: 50 / 60 Hz Dimensions: approx. 1900 x 650 x 650 mm Configuration AGIEPULS Generator (60L2) Manual/analog control Servo-controlled feed Separate control unit Documentation available Clamping device mounted Note The technical data was taken from existing nameplates and machine documentation. Auction-ID: A1-46315-27
Timken - Batch bearings 219KG Auction-ID: A1-46070-223
Technical data Manufacturer: AGEMA SA Model No.: AS 320 Machine Type: Start Hole Drilling Machine (EDM) Year of manufacture: 06/1995 Machine number: 3248 Table size: 500 x 350 mm Max. workpiece size: 750 x 500 mm Travel X/Y/Z: 300 / 200 / 150-250 mm Max. immersion depth: 250 mm Machine dimensions: approx. 1300 x 1400 x 2100 mm Weight: approx. 950 kg Power supply: 3 x 380 V Power: 1.5 kVA Configuration EDM drilling system (start hole drilling) Servo-controlled axes Separate pulse generator Dielectric system (200 l) Filter system with 2 cartridges Note Technical data was taken from the machine shield and documentation. Auction-ID: A1-46315-40
6-cylinder Perkins common rail engine with 6.6 L displacement (plus PTO and transport boat Air conditioning Air brake system (1 and 2 lines, pneumatic cab suspension ) 3 mechanical control units 4- Spigot speeds (switchable from the cab) Rear Tire Maximo 70% Front tyres Maximo 40% Göppel front hydraulics with 2 additional hydraulic couplings Retrofitted ISOBUS wiring harness Automatic pull jaw with 38 bolts Auction-ID: 04D-FJ1-3
Auction-ID: A7-45992-136
Technical data Manufacturer: AGEMA SA Model No.: AS 320 Machine Type: Start Hole Drilling Machine (EDM) Year of manufacture: 06/1995 Machine number: 3248 Table size: 500 x 350 mm Max. workpiece size: 750 x 500 mm Travel X/Y/Z: 300 / 200 / 150-250 mm Max. immersion depth: 250 mm Machine dimensions: approx. 1300 x 1400 x 2100 mm Weight: approx. 950 kg Power supply: 3 x 380 V Power: 1.5 kVA Configuration EDM drilling system (start hole drilling) Servo-controlled axes Separate pulse generator Dielectric system (200 l) Filter system with 2 cartridges Note Technical data was taken from the machine shield and documentation.
\" Manufacturer: bedra / Welo / AGIE EDM wire / EDM wire – lots of 16 rolls (different types) Lot of a total of 16 rolls of EDM wire for wire EDM machines. The inventory comes from stock liquidation and includes several manufacturers and wire types. Most of the rolls are unused and in their original packaging, some in polystyrene protective boxes or original boxes. Some rolls are open, but without signs of use and are therefore to be regarded as unused stock goods. The lot includes brass EDM wires and galvanized EDM wires of various diameters. Manufacturers include bedra (Berkenhoff GmbH), Welo GmbH and AGIE. The sale is carried out exclusively as a complete lot with all existing roles as shown. bedra topas® plus • Type: TPLH/300 • Diameter: Ø 0.30 mm • Tensile strength: approx. 800 MPa • Length: approx. 33,600 m • Coil type: P15 • Manufacturer: Berkenhoff GmbH bedra ...
" Manufacturer: bedra / Welo / AGIE EDM wire / EDM wire – lots of 16 rolls (different types) Lot of a total of 16 rolls of EDM wire for wire EDM machines. The inventory comes from stock liquidation and includes several manufacturers and wire types. Most of the rolls are unused and in their original packaging, some in polystyrene protective boxes or original boxes. Some rolls are open, but without signs of use and are therefore to be regarded as unused stock goods. The lot includes brass EDM wires and galvanized EDM wires of various diameters. Manufacturers include bedra (Berkenhoff GmbH), Welo GmbH and AGIE. The sale is carried out exclusively as a complete lot with all existing roles as shown. bedra topas® plus • Type: TPLH/300 • Diameter: Ø 0.30 mm • Tensile strength: approx. 800 MPa • Length: approx. 33,600 m • Coil type: P15 • Manufacturer: Berkenhoff GmbH bedra b ...
BIG weld-on hook suitable for Dieci Agri Farmer attachment, - Year of construction: 20255, - made of S355 steel, Dimensions of the mount:, Bolt diameter above: 61 mm, Bolt diameter below: 45 mm, Bolt spacing [Center - Center]: 350 mm
BIG weld-on hook suitable for Dieci Agri Farmer attachment, - Year of construction: 20255, - made of S355 steel, Dimensions of the mount:, Bolt diameter above: 61 mm, Bolt diameter below: 45 mm, Bolt spacing [Center - Center]: 350 mm
maximum number of results exceeded
please refine your search
10.800 € 
