126,612 used machines on RESALE, but how to find them? Machine Search
Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: 300 mm -Width: 12 mm -Price: per piece -Quantity: 3 available -Weight: 1.7 kg
Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: Ø 300 mm -Width: 4 mm -Price: per piece -Quantity: 5 available -Weight: 0.6 kg
table length: 1300 mm table width: 800 mm stroke height: 1015 mm weight max. in kg: 3000 kg : 220 mm connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 300 mm : 300 mm : 300 x 260 mm saw band length: 3920 x 34 x 1,1 mm table height: 780 mm band speed: 20 - 100 m/min total power requirement: 3,7 kW weight of the machine ca.: 1,65 t dimensions: 2,0 x 2,05 x 1,7 m PROMOTIONAL PRICE 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) co ...
Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: Ø 300 mm -Width: 6 mm -Price: per piece -Quantity: 6 available -Weight: 0.8 kg
Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: Ø 300 mm -Width: 4 mm -Price: per piece -Number: 8 available -Weight: 0.6 kg
Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: Ø 300 mm -Width: 4 mm -Price: per piece -Number: 8 available -Weight: 0.6 kg
max. ram stroke: 2 - 300 mm groove width: 2 - 32 mm power capacity: 8 kW no. of strokes: 2 - 300 Hub/min throat: ca. 300 mm Max. installation height: ca. 450 mm automatic feeds: 0,01 - 0,15 mm work speed: 0 - 30 m/min return speed: 30 m/min weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,5 x 1,5 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gebhardt roller curve conveyor 2 x 90° LINKS 610-500-300 with straight frame RA1210 The Gebhardt wheel curves with straight gear are from 2007 and are in a good (used) condition. It has a central engine of the SEW brand. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Gebhardt Type: 1070.113 Built: 2007 Condition: good (used) Engine: fully functional Angle: 2 x 90° with straight frame Outer width: 610 mm Clamping length: 500 mm Length straight line: 300 mm Rolls Type: G6/50 sliding bearing with conical plastic Molding Power rating: 30 kg/m Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2/1.15 Conveyor speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (if necessary please enquiries) Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoic ...
2 x 300 hl storage tanks, Fabr. Schulz Bamberg, bobbin bottom tanks, 0.9 bar, coolable via 1 cooling zone in the Double jacket, insulated with 130 mm and stainless steel sheet, with manhole in the lower frame, sight glass in the upper frame, with spray head with pulled down cleaning line, outlet pulled forward, ladder bracket, Crane eyelets, height: 4.25m, Ø: 3.95m, built in 2003, expanded
Pulling head, pipe assembly device -Internal threads need to be reworked -with electrical measuring connection -Dimensions: Ø 300/1050 mm -Weight: 215 kg
Console, device, clamping angle, clamping table, clamping plate, support console -Support consoles: 2 pieces, from press brake Promecam STPC 250 40 121 -Support table extension: adjustable in height -Dimensions: 515/300/H785 mm -Transport dimension: 840/540/H310 mm -Total weight: 56 kg
Machine vise, heavy duty vise, drill press vise -Machine vise: rotatable -Clamping jaws 200 x 40 mm -Clamping depth: 300 mm -Dimensions: 630/325/H200 mm -Weight: 82 kg
NNP 300l holding vessel Stainless 300L holding tank horizontal, with level detection
Transnorm belt conveyor GF 3000-700-600 RA2225 Technical data: Conveyor length (NL): 3000 mm frame width (NB): 700 mm, 900 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3000 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: 1,30 Co ...
Power converter, power converter, controller, inverter, inverter, solar power converter -Manufacturer: SMA, Sunny Boy Photovoltaic Inverter -Type: SB 3300TL HC -PAC nom: 3000W -Dimensions: 470/205/H495 mm -Weight: 26.7 kg
Dirt traps, flanged dirt traps, filters, coarse or fine sieves, coarse filters, water filters -Manufacturer: AW Armaturen Wolff, Coarse filter, corner shape -Type: AW 603.0 PN 2.5 DN 300 GG25 603300 -Sieve plate, mesh size: Ø 2mm, material: stainless steel -Dimensions: 700/50/H533 mm -Weight: 163 kg
Hydraulic distribution block, hydraulic fitting, hydraulic T-distributor, hydraulic distributo -Hydraulic fitting: T-distributor 2 1/2 -Type: 3000-2 1/2-76.1 A3L -Number: 6x distributor block available -Price per piece -Total dimensions: 235/120/H160 mm -Weight: 17 kg/pc.
MEMBRANE SKINNER, MAJA, TYPE: EVM 3006 Technical description: Serial number: 42728 Power: 0,75 Kw, 380 V, 50 Hz Working widht: 545 mm Dimensions: 1000 x 600 x 1050 mm This machine has only been designed for use in the meat processing industry. The EVM 3006 type is a membrane skinning machine used to open and manually remove the membrane and skin from pieces of fish, pork, beef, poultry, veal, game and horse. Only round and flat products may be processed on open membrane skinning machines (e.g. knuckle joints or thighs)
Hydraulic distribution block, hydraulic fitting, hydraulic T-distributor, hydraulic distributor, -Hydraulic screw connection: size 2 1/2 -Type: 3000-2 1/2-76.1 A3L -Number: 15x hydraulic screw connection available -Price per piece -Total dimensions: 105/26/H114 mm -Weight: 1.2 kg/pc.
Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Temperature sensor: screw-in temperature sensor -Measuring range: 0 to 300°C -Accuracy class: KL.1 -Measuring probe: Screw-in length 200 mm -Transport dimension: 330/260/H140 mm -Weight: 1.3 kg
Stn -; Kuipers Woudsend steriltank. • Holdup volume 3000 litre, bruto 3400 litre • Working pressure -1/5 bar. • Test pressure 7 bar. • Design temperature 0/159°C. • Year of manufacture 2001. • Net weight ±1100 kg • Including complete documentation of tank.
Automatic stretch-banding machine incl. linear blister feeder, blister grouping and counting device and banding unit. Control system: SIEMENS, type Simatic S7-300
Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: GSL (German Standard Lift), hydraulic reservoir for the drive of work platforms -Additional parts: see photos -Dimensions: 300/295/H550 mm -Weight: 11.4 kg
Servo drives from Indramat KDS 1.1-100-300-W1
300 m pallet rack Nedcon New goods, see pictures! A top shelving system from the major manufacturer NEDCON – this is a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height 6.5 m Depth 110 cm, blue Beam length 2.7 m orange Carrier with ballast /compartment 3050 kg, Negotiation price: € 52.490,-- net from stock Offer consists of: + 126 pcs. frame pre-assembled, depth 110 cm, height 6.5 m + 750 racks, length 2.7 m, 3050 kg ballast/compartment +1500 pcs Suspension locks + 504 pcs concrete anchors Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Field load 12 tons, higher bay loads possible on request. Carrier orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. ...
Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons
sheet width: 0250 mm coil outside dia.: 1800 mm weight max. in kg: 2 x 3000 kg : 3,80 mm : 470 - 530 mm : 21 : 30 mm : 4 : 18,0 kW speed: 20 m/min power capacity: 18 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Decoiler AH 3000/2/250/ST with continuously variable drive, hydraulic central spread, Automatic post-spreading system, hydraulic pressure device, hydraulic swivel, Straightening machine RM 3025.4/21 with continuously variable drive, driven straightening rollers, manual Roller mill adjustment, quick-change device for the straightening rollers Belt loop control via ultrasound Material thickness / with material width 3.80 / 250 mm Material thickness / with material width 6.00 / 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 5875 Type: KM 300-1400 C1 Producer: Krauss Maffei Created: 2001 Parameters: Laser ON: 70,000 h Clamping force: 300 t Screw diameter: 60 mm Injection capacity: 679 cm³ Injection mass: 618 g Min. height of clamping plate: 995 mm Min. width of clamping plate: 1050 mm Distance between uprights (horizontal): 630 mm Distance between uprights (vertical): 630 mm Ejector stroke length: 200 mm Maximum spraying pressure: 2000 bar Pump power: 45 kW Opening the mold: 820 mm Machine length: 6000 mm Machine width: 2100 mm Machine height: 2400 mm Injection weight: 12,500 kg Equipment: Robot Getecha Aschaffenburg GL 5 (built in 2001)
We offer: Used collision protection corners 10 pieces, approx. 400 mm 22 pieces, approx. 300 mm at the warehouse 21698 Harsefeld. Per piece € 17,00 net plus 19 % VAT ex stock 21698 Harsefeld. Price only valid while stocks last. Subject to changes and errors. We are a professional provider – invoice with VAT shown.
We sell a tape rounder from Gostol Gopan. The effective path is over 3m ! The machine is overhauled.
Cover for electric hand pallet trucks -Handover: in its current condition as inspected -Damage: see photos -Manufacturer: Linde Cover from electric hand pallet truck -Dimensions: Ø 300 x 200 mm -Weight: 1 kg
5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - n. 2 working tables 1400x3000 mm - n. 3+3 rails per each working table - n. 3+3 CSR supports per each table - head type CS 44 (n. 4 motors 7.5 kW each) - rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - n. 2 inverters - wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - remote support - communication PC/CN TCP/IP - cabin + roof - CE rules - year 2010 - COMPLETELY RECONDITIONED
Inv. Num. : 7383 Type: AquaCut 3001.20WB Producer: MicroStep Created: 2016 Parameters: Control System: iMSNC Duty cycle: 35712 h Hours: 20646 h Work table length: 3000 mm Work table width: 2000 mm Equipment: Cutting head Drilling spindle
Capacity up to 6 tons For more details contact with us
clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Surface: with grooves, without T-slots -Length: 3000 mm -Width: 2500 mm -Height: 300 mm -Transport dimensions: 3000/2500/H300 mm -Weight: 5220 kg
Pipe grab, round grab, laying clamp, round material grab, scissor grab -Manufacturer: Tigrip, round material gripper type TRU 15/300 -Grip width: 80 to 300 mm -Load capacity: 1.5 tons -Number: 2x grippers available -Price: per piece -Dimensions: 700/220/H500 mm -Weight: 25 kg/pc.
V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 8 grooves SPC 300 8 -V-belt width: 22 mm -Receptacle: Ø132/145 mm for taper clamping bush TB 4040 (can be changed) -Dimensions: Ø300 x 215 mm -Weight: 44 kg
SECOND-HAND OLEO PNEUMATIC LATHE FOR TURNING AND SANDING OF SMALL WOODEN ELEMENTS LOCATELLI MOD. OMK 300 - control panel - automatic loader - Maximum working length 300 mm - min / max working diameter 8/80 mm - working stations: automatic loader turning with n. 2 gouges (roughing + finishing) 1° shaped knife 2° shaped knife unloading
Magnetic chuck, permanent magnetic round chuck, magnetic clamp, magnetic chuck -Magnetic chuck: Permanent magnetic round chuck chuck size Ø 305 mm -Hole circle: Ø 170 mm -Receptacle: short cone 8 / cone 135 - 139 mm -Weight: 54 kg
Spiral seal, labyrinth housing seal, flange seal -Manufacturer: ISW, spiral seal: flange seal 5 pieces/package -Type: 4 Class 300 lbs like Spiraltherm 304SS with inner and outer ring -Quantity: 4 packages available -Price: per package -Dimension package: Ø180 x 30 mm -Weight: 1.8kg/package
Inv. Num. : 4567 Type: 300-50 Producer: DEMAT Created: 2016 Parameters: Power consumption: 4.5 kVA Control cabinet / socket cover: IP 54 / IP 44 Length of conveyor: 2400 mm Conveying speed: 2 m/min Belt width: 250 mm Coil window size: 320 x 320 mm Weight: 180 kg
Key data: 4 mm, 80 , 20
Heavy Duty Four-Sided Planer Still in operation until the end of July 2024! Detailed technical description in the PDF document (attached in the photo gallery).
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Clamping surfaces: 300 x 160 x 20 mm / 300 x 200 x 30 mm -Dimensions: 300/160/H200 mm -Weight: 18 kg
Key data: 3000 mm, 8 mm
Max. cutting length: 3,000 mm Max. sheet thickness: 8 mm steel Motorized backgauge with fine adjustment via handwheel up to 1000 mm Cutting length limitation Knife sharpened Weight: 6,800 kg
Vernier caliper, caliper, vernier caliper -Manufacturer: Holex, Digital Caliper -Item No.: 41 2811 300 -Measuring range: 0-300 mm -Measurement accuracy: 0.01 mm Quantity: 1 piece available -Case dimensions: 465/180/H30 mm -Weight: 1.0 kg
Pyrolysis furnace ECON EPO 300 Condition: as good as new, only used 10 times
Door closer, floor door closer, closing mechanism -Manufacturer: Geze, Pendulo C door closer, unused -Function: Swing door 90 DEGREE - only locks at 0 degrees - 90 DEGREE -Art.No.: 3000-002336 H06-14-00-00 -Number: 44 door closers available -Price: per piece -Dimensions: 315/45/H65 mm -Weight: 1.3 kg
maximum number of results exceeded
please refine your search
