127,239 used machines on RESALE, but how to find them? Machine Search
Screw Vacuum Pump - Unused Manufacturer: Alcatel / Adixen Type: A 300 P Motor: 380-460V Status: Used; As Performance: 12 months Suction power: 320 m3/h connection: ISO-K 63 final pressure: approx. 1.2x10-2 mbar (abs.) Including: user manual ; ready for use
Merkle Insquare 300 AC/DC welding system Primary: Voltage: 3 x 400 V Frequency: 50 (60) Hz cos phi: 0.95 TIG DC Range: Open circuit voltage: 80 V Working voltage: 10-22.8V Welding current: 5-320 A HSB 60 % d.c. (10 min.) 320 A HSB 80 % d.c. (10 min.) 300 A DB 100 % DC: 260 A (40°C) Continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary Maximum current: 19 A TIG AC Range: Open circuit voltage: 80 V Working voltage: 10-22.8V Welding current: 5-320 A HSB 60 % d.c. (10 min.) 320 A HSB 80 % d.c. (10 min.) 300 A DB 100 % DC: 260 A (40°C) Continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary Maximum current: 19 A Electrode welding operation: Rod electrodes: 1.5-6 mm Open circuit voltage: 80 V Working voltage: 20-32.8V Welding current: 5-320 A HSB 60 % d.c. (10 min.) 320 A HSB 80 % d.c. (10 min.) 300 A DB 100 % DC: 260 A ...
length: 300 mm width: mm height: 200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Key data: 240 , 300 , 400
Emergency power system NSA as a backup power system with a nominal power of 300 kVA with Volvo Penta engine TAD 842 GE grid-parallel Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Volvo Penta Engine Model: TAD 842 GE Engine No.: on request Engine power: 273 KW PRP | 299 KW LTP Cooling: Water-cooled Tempering: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 + Diesel B 7 Generator manufacturer: Stamford AvK Generator type: S4L1D-D Gene. No.: on request Generator power: 300 kVA Voltage: 400 / 231 volts Power factor: cos. - PHI 0.8 Speed: 1500 rpm Tank: Design: Base frame tank with drip pan Capacity / litre: 500 Dimensions of the power unit: Width approx. mm: 1.350 Height approx. mm: 2.370 Length approx. mm: 3.770 Weight approx. KG: 3.700 ...
new
Execution: Aggregate type: stationary Execution: Skid frame Technical data engine: Engine manufacturer: MTU Engine: 20 V 4000 G 34 F Engine No.: in production Power: 2590 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: Synchronous with AVR Gene. No.: in production Generator power: 3000 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 2000 Dimensions of the power unit: Width approx. mm: 1.887 Height app ...
Rotary vane vacuum pump oellubized Manufacturer: Leybold Type: Sogevac SV 300 B Cat No.: 960702 Status: Preliminary performance as goodas nominal power suction power: approx. 280 m3/h end pressure: approx. Gas ballast Special equipment: thermal switches, FKM seals Performance: 12 months Zubehoer: user manual, mineral filling delivery time: from stock; ready for use
Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-A-CV-300 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Leybold pump stand Consisting of: pump 1 Leybold Sogevac SV 300 (optionally with water cooling or air cooling) pump 2 Leybold Ruvac WAU 1001 H The individual pumps or the entire frame can be transferred. A service is 12 months in a general recovery. Several frames, versions available!; ready for use
Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-A-CVE-300 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-B-CV-300 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Seydelmann frozen meat grinder GW 300, all stainless steel, for frozen block up to -25 degrees, measurements max. 900/500/150 mm, hopper capacity approx. 450 liters. You are very welcome to test the machine in our facility in Koblenz, Germany.
Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-B-CVE-110 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
New SGB transformers 1000KVA power voltage: 10/20kv - 690V SWITCHABLE other services and voltages also available easy questions! SEE photos was still never used available now 6 PCs of nationwide cheaper delivery issues is always available: Mr Serhan 01727265324 or e-mail: Transformatoren@gmx
Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-C1-CV-300 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-C1-CVE-300 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
TRUMPF TruPunch 3000-1300 (S11) punching machine was built in Germany in 2013. The reliable machine with extensive equipment and modern components offers its user unparalleled precision and accuracy in machining both thick and thin sheet metal. In addition to standard punching and marking, the punching machine also allows fast grooving, surface embossing, forming and chipless threading in stainless steel, structural steel and aluminium. On the machine’s sturdy and welded C” shaped structure, sits a specially designed brush table with integrated balls, designed to facilitate the loading and unloading of workpieces. The use of this type of table prevents scratches and nicks from appearing on the surface of the sheet, which results in a significant increase in the quality of the machining. During the entire production process, the sheet is held rigidly by hydraulic clamps fixed to th ...
The machine has been overhauled in the workshop. It was repaired, defective parts were replaced and functionally tested . The spindle bearing has been renewed, the rotary table drive has been overhauled Specifications Vertical grinding spindle assembly Workpiece diameter up to 30 mm Max. workpiece height 10/20 mm Grinding wheel diameter 300 mm Grinding wheel rotation speed 35 m/s Workpiece feed 1.5 to 15 m/min Drive power grinding wheel motor 2 x 22 kW Total drive cable approx. 50 kW Machine weight approx. 4.5 t Total space requirement approx. L x W x H 3.3 x 2.6 x 2.6 m The DISKUS DDS 300 RPD has been completely dismantled, cleaned, assembled and functionally tested. Spindle bearings and rotary table drive have been overhauled. Equipped by the manufacturer for grinding with CBN discs. The machine can be viewed by arra ...
GEA-CFS” fryer Type BRN 3000/500 all stainless steel electrically heated 84 kW frying length 3.000 mm belt width 500 mm mechanical lid oil level control teflon-infeed extra infeed conveyor 5 mm extra outfeed conveyor 5 mm oil circulation pump filter sediment removal system electrical hoists fire protection total length ± 6.650 mm total width ± 1.500 mm total height ± 3.200 mm
Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, used Material colour: grey INP: 80 x 42 mm Truss type: TRV1-330-08-l Agraffe: 5 HK (hook) Clear width: 3,300 mm max. load per pair of trusses 1,400 kg, with the same weight Distributed Load 02x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
with gas burners Weishaupt new glass wool new stainless steel sheets New storage engine Power Max 465 kW the boiler is uberholte with gas burner Weishaupt with new glass wool new grid grate Engine re-stored Power Max 465 kW the boiler is overhauled
Double grinding buck Rema with cue equipment, large collecting tray, new condition. Grinding wheel diameter 300mm, 1.8kw Special price
Bar max: 8 m3/h: 211 KW: 22 V / P / Hz: 400 / 3 / 50 min - 1: 3000 Kg: 465
METALPRES NHM 3006 hydraulic guillotine shears built in the Czech Republic in 2000, are used for precision cutting of black or acid-resistant steel sheets with a maximum length of 3000 mm. The NHM 3006 T guillotine shears have been regularly serviced and upgraded throughout their lifetime. In 2023, a general overhaul was performed with a net value of approximately PLN 16000, during which seals, clamps, controls, electrical installation with cabinet were replaced and the knives were sharpened. The price of the machine also includes a rack with saw for steel and a rack for sheet metal shown in the photos. The total weight of the METALPRES NHM 3000 3M machine is 2000 kg. Technical specifications of the METALPRES NHM 3006 guillotine shears - maximum cutting length: 3000 mm - maximum workpiece thickness (acid-resistant steel): 5 mm - maximum workpiece thickness (black steel): 6 mm - di ...
We offer you used warehouse stage. Technical data of offered camp stage of Nedcon: It is possible to run a stock stage in the following composition: Possible column spacing: 4 m x 4 m, 5 m x 5 m. Height 3895 mm incl. gratings Höhne 3845 mm only with Sigma -Load capacity 300kg / sqm -Base plate which is made of non-slip plate, thickness of the base plate 40 mm -Project prepared according to customer needs. Price for bearing stage only on request available. Please contact us in connection. Price for 1 m² - â?¬70 NET / sqm plus Assembly Prices are net, plus statutory VAT. On request, we can arrange transport throughout Europe. After entering your postcode we will charge you the delivery charge We offer a professional fitting. Mistakes and intermediate sale is reserved! Offer valid until stock lasts. It's used goods. Before you ...
Bundle/Stream feeders Built in 2001; working condition
Impact tester with motoric hammer lifting and protection housing - ready equipet for testing according CHARPY ISO148 (EN10045) - Demo-Machine (as new) - potential energy: 300 Joule - alternate models: 150 / 300 / 450 / 600 / 750 J. - warrenty period 24 month - see also the photos of optinonal items ; new
Indramat Module TDM 3.2-030-300W1 Bosch Rexroth
CNC lathe GILDEMEISTER CTX ALPHA 300 with bar feeder and parts pick-up device Built in 2010 in good condition. Duty Cycle: 22930 Hours: 7326 Control Heidenhain CNC-Pilot 640 Circulation over bed: 380 mm Circulation via face slide: 290 mm Spindle bore: 73 mm Flat travel ( X ) : 190 mm Longitudinal travel ( Z ) : 335 mm Speed max. 6000 rpm C-axis 360° Number of driven tool stations 12 pos. Tool holder VDI 30 Accessories: 3 jaw chuck hydraulic 170 mm Conveyor Coolant system Hydraulic hollow clamping device Tool drive C-axis Parts pick-up device Bar Feeder Irco RBK10012 Tailstock
Rühle Tumbler MKR 300, Ruehle Hightech Tumbler with vacuum, incl. mixing and tumbling arm, container size 300 liters, Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device. You are very welcome to inspect the machine at our facility in Koblenz, Germany. If you have any questions, please do not hesitate to contact us.
Double grinding machine TS 300 SD P with SUCTION, machine stand, emergency stop push button and brake smooth-running, maintenance-free motor Protective covers closed at the sides Stable, adjustable workpiece supports High level of safety comfort thanks to adjustable spark deflectors suitable for grinding, deburring and sharpening tools of all kinds, metal profiles, etc. Motor Circuit Breakers and Undervoltage Trippers Double-sided spark/eye protection connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single-shift operation - Grinding wheel (mm): 300 x 40 x 51 - Machine dimensions without packaging (mm): 540 x 530 x 1,180 mm 230 - Speed (1/min): 1250 - Three-phase motor 400 V / 2.2 kW: operating mode S2-30 min (short-term operation) - Extraction motor 0.55 kW, suction power 350m³/h - Weight (kg): 90 Shipping time:immedia ...
Fan Polytechnik L 300 Masch. No. 82261 Speed 1400 RPM Performance 7200 m3 / h Motor 380, 50 V, 7.5 kW Pressing 215 mm / WS Connection ø 300 mm H x W x d: 1080 x 950 / 1350 x 950 cm Weight 170 kg Built in 1982 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Key data: 530 mm, 500 mm, 4000 1/min
Machine Details Stock-No. 1105-04005 Type of machine CNC Lathe Make COLCHESTER Type TORNADO 300 Year of manufacture 1995 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORK Price Technical details turning diameter 530 mm turning length 500 mm control FANUC OT total power requirement 22 kW weight of the machine approx. 3.3 t Additional information GOOD MACHINE CNC CONTROL FANUC OT Cuck Taikstock VDI 40 Turret 12 P Chip Convoyer echnical information Swing over bed 530 mm Swing over cross-slide 330 mm Distance centre tot centre 500 mm Max longitudinal travel Z-axis 20 m/min Max cross travel X-axis 10 m/min Spindle cone A2-8 Dia of spindle bore 90.5 mm Power on the spindle 22 kW Number of speeds 4000 rpm Command Fanuc Total power needed 53 kVa Length 3500 mm Wid ...
Indramat Module TDM 1.2-100-300-W1 Bosch Rexroth
Indramat module TVM 2.4-050-220/300-W1 Bosch Rexroth
Indramat AC servo drive module TDM 3.2-20-300-W0 Bosch Rexroth
Printing capacity max. 300 t, table 1500 x 1000 mm, stroke max. 500 mm
This machine is particularly suitable for the processing of electrical waste with PVC and rubber. Diameter range 2 - 115 mm Cutting speed 35 meters per minute Weight 350 kg
Technical data capacitor volume flow max.: 300m3/h capor-mass max in delivery state: approx. 430mm x1610 mm high Cylindricher part: approx. 273 mm weight of the chamber in delivery state: approx. 80 kg content upper part (capacitor): approx. 30L content lower part (template) approx. 28 L material Elastomers: NBR/FKM/PTFE Temperature capacitor max: 1 to 80C capacitor vacuum max: 0 to 1000 mbar (absolute) (capacitor not suitable for overpressure) Temperature exchanger max: 1 to 80C operating equipment Exchanger: water pressure exchanger max: 10bar material exchanger: CU-tinned material capacitor: stainless steel Technical questions or other construction equipment please on request.; ready for use
Manufacturer: MicroStep Type: SPL-PA 3001.15+S500 Working range: 3000 x 1500 mm + 500 mm shaft technology: plasma built in 2006 Kjellberg HiFocus 160i with autom. Gas console; (see PDF) 2 x additional quick-release co-buttons PerCut 170 Div. Wear parts Donaldson filter system including disassembly and delivery within Germany. Commissioning on request.
Key data: 2400 KW, 3000 kVA, 400 V
ENGINE: MTU 20V4000G63 FREQUENCY (HZ): 50 VOLTAGE (V): 400 POWER: 3000kVA / 2400kW CYLINDERS: 20 STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 24500kg DIMENSIONS L/W/HEIGHT (MM): 830029502550 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with ...
Description Filler Handtmann model VF300 is a computer controlled vacuum filler offering very high performance with innovative technical solutions applied. Model VF300 is ideal for the production of meat products and find it applies in large and small manufacturing plants. The device is a very accurate-allows you to achieve the highest quality of the product. Handtmann applied in your device pneumatic lift mechanism for automatic loading. Specification: Brand: Handtmann Model: VF300 Volume: 300 L Dimensions: 2030 x 1750 x 1400 (mm) Power supply: 400V 50 Hz 3N Power: 6.5 kW
Hydraulic press brake. Working length: 3.000mm. Pressing force: 200Tn. Back gauge.
LEYBOLD pump stand consisting of: Pump 1 LEYBOLD Sogevac SV 300 (optional with water cooled or air cooled) pump 2 LEYBOLD Ruvac WAU 1001 H Each pump or the entire frame can be readmitted. A warranty is a complete overhaul of 12 months. Multiple racks, versions available!; ready for operation
Demo Machine Specifications: Dimensions - 1300 x 1560 x 1210 mm, (with built-in drive and control cabinet) Dimensions of the packed machine - 1500 x 1800 x 1320 mm, External dimensions of the mill drum - Ø870 x 1120 mm, Distance between bearings - 1260 mm, Height of the drum axis - 860 mm, Operating capacity - 600 dm3, Weight of the machine - 641 kg, Installed power - 5.5 kW, Input voltage/frequency - 400V/50Hz, Connector - 32A; 400 V Milling time range - 1s... 99h59min, Mill installed on a steel frame, Drum made of 10 mm steel without inner lining. including first filling 80 mm steel balls Technical specification: Dimensions - 1300 x 1560 x 1210 mm, (with drive and control cabinet installed) Dimensions of the packed machine - 1500 x 1800 x 1320 mm, Mill drum external dimensions - Ø870 x 1120 mm, ...
Block vane vacuum pump status: used, tested, working Manufacturer: Kinney Type: KT-300 D Engine: 400V Resources: Mineral oil Nominal: 25 m ³/h Discharge pressure: < 0.008 mbar (ABS.) Includes: user manual Oil (mineral oil) delivery: ex works; ready for operation
Key data: 240 KW, 300 kVA, 400 V
GENERATOR ENGINE: Perkins 1506A-E88TAG5 FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 300(kVA) / 240(kW) ENGINE POWER: 240(kW) CYLINDERS: 6 CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 2150kg DIMENSIONS L/W/HEIGHT (MM): 310010001700 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry wi ...
all stainless steel capacity 300 L. (= ± 10CF) Double Ribbon mixing arm Dimensions: (l x w x h) : ± 1.900 x 670 x 1.740 mm (open lid : ± 2.140 mm) outfeed height : ± 720 + 20 mm safety lid CE-approved 2 speeds: 16 en 32 rpm 2 mixing directions 5,5 kW Digital – touch screen with programs Perfectly suitable for dry products, such as: herbs, ingredients, powders,…
maximum number of results exceeded
please refine your search
