detector used for sale

Metal Detector Loma Systems EMC90541-14363 -Metal detector -Manufacturer: Loma Systems -Weight 185cm -Inlet tunnel: 35cm wide and 11.5cm high -380 Volt 3OPh 50Hz

Loma Combination IQ3 metal detector and CW3 check weigher 250 x 90mm aperture. 200mm conveyor width. 360mm weigh pad width. 2100mm machine length. 920mm line height with adjustable feet. M&S Spec machine.

Varian Flat Panel Detector PaxScan 4030 A Size: 30 x 40 cm Part Number: 21206 Date of manufacture: 2006 Technology: amorphous Silicon (A-Si) Flat Panel Typical applications: DR X-ray systems, industrial imaging, materials testing Condition: used, removed from functional system (Varian Acuity EX therapy simulator) Applications: Replacement of existing Varian-based DR systems, components for service and repair companies, research & development • Before taking over, all devices or systems have been tested on site for their functionality. • The detector is located in our warehouse in Freiberg / Germany and can be picked up immediately • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried ...

350 x 200mm aperture. 300m conveyor width. 1.8m long. Push reject system. Right to left production. Full supermarket spec. 880 Line height with adjustable feet.

Trixell Flat Panel Detector Pixium 4600 Active area: 43 x 43 cm Part Number: 100204 Date of manufacture: 2006 Technology: amorphous Silicon (A-Si) Flat Panel Areas of application: Replacement for existing Trixell-based DR systems, components for service and repair companies, research & development • Before taking over, all devices or systems have been tested on site for their functionality. • The detector is located in our warehouse in Freiberg / Germany and can be picked up immediately • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • We are dealers of used medical devices. We do not repai ...

Trixell Flat Panel Detector Pixium 4700 Size: 30 x 40 cm Part Number: 61166546 Date of manufacture: 2006 Technology: amorphous Silicon (A-Si) Flat Panel Typical applications: fluoroscopy, radiography, C-arms, angiography Condition: used, removed from functional system (Siemens AXIOM Artis dTA) Areas of application: especially suitable for Siemens AXIOM Artis dBA, dFA, dTA or dMP • Before taking over, all devices or systems have been tested on site for their functionality. • The detector is located in our warehouse in Freiberg / Germany and can be picked up immediately • You buy the detector in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration o ...

550 x 160mm aperture. 400mm conveyor width. 3250mm machine length. 900mm line height with adjustable feet. New belt fitted on the machine. Right to left production. Full supermarket spec.

Includes Stonex and Unistrong accessories Auction-ID: A1-47168-205

Fuji GOS Flat Panel WLAN Detector FDR ES G35 Size: 35x43cm Model: DR-ID 1270 Year of Make: 2020 Technology: Gadolinium Oxysulfide (GOS) Flat Panel - good image quality at moderate doses Accessories: Charging station with 2 batteries, workstation, documents and software Typical applications: Thoracic images, abdominal overviews, skeletal images (extremities, spine, pelvis), overview diagnostics in the emergency room Condition: used, in good technical and optical condition Areas of application: replaces classic imaging plates (CR) and delivers instant digital images, can be used between different workstations without changing cables, fits into almost all standard bucky systems • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. • You buy the system in "IS ...

Loma Systems metal detector, model: IQ3+E ST, serial number: QEU35-15-38270D, year of construction: 25-05-2017, 85-265 V, 50-60 Hz, 0.5-1.0 A, plastic belt, belt width: 285 mm, clearance: 350 mm x 120 mm, total dimensions: 800 mm x 800 mm x 1250 mm.

450 x 160mm aperture. 300mm conveyor width. 1800mm machine length. 870mm line height. Left to right production.

350 x 115mm aperture. 300mm conveyor width. 1.3m machine length. Air reject system. 1.3m machine length. Adjustable line height with wheels.

370 x 160mm. 310mm width conveyor. 760mm line height with adjustable legs. 1200mm long. Left to right production. Ferrous in foil.

350x100mm aperture. 280mm conveyor width. 900mm line height, adjustable legs. Left to right production. Air or push reject system. 2300mm total machine length.

370 x 100mm aperture. 300mm conveyor width. Right to left production. Reject system. M&S Spec. 2100mm long 840mm line height with adjustable feet.

300x160mm aperture. 250mm conveyor width. Left to right production. Supermarket spec. 900mm line height with adjustable feet. 2600mm machine length. Full electrical rebuild completed.

350 x 130mm aperture. 870mm line height. 1600mm machine length. Supermarket spec. New belt and reject system. Left to right production.

Usable aperture – 355mm x 160mm. Conveyor width – 300mm. 1.5m long. 90cm high. Left to right production.

1 x Brand new CEIA THS21 Metal detector head.

Usable aperture size 360mm (wide) x 110mm (high). 300mm wide conveyor belt. Full length 2,500mm. Line height 900mm. Stop on detection. Left to right production direction.

Usable aperture size 350mm (wide) x 135mm (high) 230mm wide conveyor belt Full length 2500mm Line height 850mm Auto push reject on both machines. Left to right production direction

350 X 110mm usable aperture. 260mm conveyor width. 920mm line height. Twin head metal detector with reject. M&S Spec. Right to left production line.

Usable aperture size 550mm (wide) x 200mm (high) 450mm wide conveyor belt Full length 2000mm Line height 860mm Right to left production direction

450 x 130mm aperture size. 320mm wide conveyor belt. Checkweigher table width 390mm. Air blast reject system. 2200mm machine length. 900mm line height.

250 X 155mm aperture. 190mm conveyor width. Air reject system. 1030mm Line height. Left to right production direction. M & S Spec.

450 x 155mm aperture 400mm conveyor width. 920mm line height with adjustable feet. 1800mm machine length. Right to left production. Drop reject system.

355 x 200mm aperture. Usable aperture of 155mm. Conveyor width of 300mm. 850mm line height with adjustable feet. 475mm weigh pad length. Right to left production. M&S spec machine.

450mm W x 200mm H Right to Left Conveyor Width 400mm Conveyor Height 840mm Stop on detect Overall length - 1950mm

Metal detector Safeline V4-wheel Mettler Toledo - Model: V4-RAD - Metal detection - Voltage voltage: 100.240 Vac - Frequency: 50 /60 Hz - Power: 340 W (Max.)

Agilent 5973 MSD Detector,Network/LAN Connector, Diffusion pump, completely overhauled

Agilent 5973 N MSD Detector with Edwards turbomolecular pump or diffusion pump, used and refurbished on request also complete as measuring station with Agilent 6890GC Please inquire about the price per piece

Agilent G 1362 A RID Detector Refractive Index Range 1.00-1.75 RIU Measurement Range +/- 600x 10-6 RIU Sample Cell 8 ul Analog Output/Recorder/Integrator 100mV or 1 V Communications: CAN, GP-IB, RS 232; LAN

Agilent G 1321A Fluorescence Detector Ex Monochromator range 200 – 700 nm Em Monochromator range 280-900 nm Wavelength characteric Repeatability +/- 0.2 nm Accurcacy +/- 3 nm Flow cell 8μl Analog Output/Recorder/Integrator 100mV or 1 V Communications: CAN, GP-IB, RS 232; LAN Remote: ready, start, stop and shut down signals

Inv. Num. : 7717 Type:- Producer: Mettler Toledo Created: 2016 Parameters: The machine is in good condition.

Sparc Cerberus Combination unit Fortress Metal detector head Usable aperture - 350mm x 120mm Conveyor - 300mm Weigh Table length - 520mm Right to left direction Ply belt 16amp single phase plug machine is fully tested and working with new belts, bins supplied and all fail safes working Lockable bin, bin full etc Supermarket Spec

Loma IQ Twin head metal detector Stainless metal detector, twin head, ferrous in foil, belt dimensions 2000mm x 280mm, aperture 340mm x 120mm, push arm reject, 3Ph

Boekels EMD7025 Metal detector Serial: BA7964 Stainless metal detector, stop and start with alarm reject, aperture 700mm W x 220mm H, overall length 2200mm, mobile, 3Ph

Sensitivity: ferrous metals: 2mm, non-ferrous metals: 3mm, non-magnetic stainless steel: 3.5mm. min. product dimensions X/Y/Z: 170mm/110mm/20mm, max. product dimensions X/Y/Z: 270mm/260mm/150mm, product weight min./max.: 100g/3000g, product distance: 300mm, speed: 20m/min, throughput: approx. 50 pieces/min. Machine dimensions X/Y/Z: approx. 1700mm/1500mm/1000mm, weight: approx. 100kg. Including discharge by air. On-site inspection is possible.

Stock number: D689, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Metal detector, Dimensions Aperture: B 200 x H 150 mm, Conveyor: Lamella conveyor with push-off arm, Dimensions Conveyor: L 2500 x W 200 mm, Product size: Max height 110 mm

Merck Hitachi Ri Differential Ri Detector Merck RI 71, Ri Detector Analytical flow cell Occasion

Merck Hitachi Ri Differential Ri Detector Merck RI 71, Ri Detector Analytical flow cell Occasion

Height=1.39 m, Overall length= 2.27 m, Overall width= 0.99 m, Net weight= 66 kg,

Height=1.4 m, Overall length= 0.95 m, Overall width= 1.5 m, Net weight= 160 kg,

Height=1.32 m, Overall length= 0.75 m, Overall width= 1.7 m, Net weight= 155 kg,

Height=1.1 m, Overall length= 0.9 m, Overall width= 1.2 m, Net weight= 134 kg,

Height=1.21 m, Overall length= 0.78 m, Overall width= 1 m, Net weight= 150 kg,

1 LOCK INSPECTION SYSTEMS tunnel metal detector type Garmentcheck MET 30+, year 2000

Producent: LOMA Type: IQ 3 Metal detector LOMA type IQ 3 with Intralox conveyor belt Multi-Frequency Metal Detector with Conveyor Belt With TOUCH screen operator terminal Product Feedthrough: 550 x 150 (100) mm (W/H) Fully automatic metal detection system with evaluation electronics Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

Loma IQ3+ Metal detector Stainless, belt dimensions 1100mm x 300mm, aperture 500mm x 90mm,

This is a LOMA Systems IQ-series industrial metal detector, commonly used in food and dairy processing lines. Here’s a clear, practical breakdown of what it is and what it does., Its job is foreign body detection — specifically metal contamination — to protect:, - Product safety, - Equipment (pumps, fillers, valves), - Brand and compliance (HACCP, BRC, IFS, etc.), You’ll typically find these on:, - Dairy products (cheese, butter, powders), - Ready meals, - Meat & poultry, - Bakery, - Packaged foods on conveyors, What metals it detects, The IQ range detects all three common metal types:, - Ferrous (iron, steel), - Non-ferrous (brass, aluminium), - Stainless steel (the hardest to detect in food environments), Sensitivity depends on:, - Aperture size, - Product type (wet/dry, salt content), - Conveyor speed, - Calibration, The LOMA IQ control system, The LOMA IQ® controller you sho ...