detector de metal used for sale

The new cold-regenerating adsorption dryer from Parker Zander combines proven and reliable elements of adsorption technology and impresses with a clear concept. Distinctive features of the K-MT adsorption dryer series such as • Adsorber profiles made of one piece • Separately controlled main and blow-out valves in leak-free design • Compact check valve combination, guarantee continuous operational reliability with high availability at the same time All adsorption dryers of the K-MT series have • Self-cleaning sieve trays on the wet side • High-quality desiccants In adsorption, desiccant stores the moisture contained in the compressed air. Parker Zander uses only high-capacity, high-capacity high-capacity molecular sieve type desiccant. This desiccant guarantees a long service life at high inlet temperatures or low pressure dew points. Regeneration takes place  ...

Vertical condensate accumulator tank made of stainless steel with a capacity of 100 liters. Top klopper bottom with flange type connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters total Background type Klopper Envelope 4 legs Outer diameter body 450 mm Body height 570 mm

Roller conveyor / pulley conveyor curve 90 degrees Manufacturer: Costo Year of Make: 2009 Condition: Used Model: 90 Degree Curve Total width outside: approx. 2250 mm Total width inside: approx. 1140 mm Total width: approx. 800 mm Conveyor width: approx. 740 mm Total height including side guide: approx. 220 mm Material: Steel Frame height: approx. 120 mm Stock: 2 pieces Price per piece Condition: fully functional, with signs of wear Feet to be ordered separately Material: Steel Ideal for fast material transport Expertly dismantled and packed Internal Article Number: 2026031202 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, ...

DEHUMIDIFIER MUNTERS ML 180 Desiccant dehumidifier with air-cooled condenser. Designed to efficiently dehumidify unheated enclosed spaces, with operating hours counter. Stainless steel sheet exterior, one-piece, fully corrosion-resistant plastic, with interchangeable front and rear panels for easier installation. Built in 2009. FEATURES - operating temperature: +0 / +25 °C - dehumidifies up to -20 °C - dehumidifies up to low dew point - IEC Protective class (unit): IP33 - IEC Protective class (electrical panel): IP54 - Sound power level to room Lw(A) dB (all inlets and outlets ducted): 75 dB(A) - Filter class: G3 Process Air - Rated airflow: 180 m3/h - Available static pressure: 200 Pa Reactivation Air - Rated airflow: 67 m3/h Condenser - Sensible heat: 1.4 kW - Fan power: 0.3 kW - Rated airflow: 650 m3/h - Available static pressure: 200 Pa  ...

Vertical condensate accumulator tank made of stainless steel with a capacity of 100 liters. Top klopper bottom with flange type connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters total Background type Klopper Envelope 4 legs Outer diameter body 450 mm Body height 570 mm

Calderin tank with a capacity of 500 liters manufactured by IBAIONDO. General characteristics: Maker IBAIONDO Year of manufacture 2014 Design and working conditions: Air or water Volume: 500 liters Temperatures: -10/+100 ºC Maximum pressure: 10 bar Test pressure: 15 bar

Vertical tank made of stainless steel with a total volume of 100 liters (80 useful liters) Top bottom klopper screwed to the body with peephole, 3 male thread connections and one female thread connection. Bottom klopper with discharge from the bottom On structure with wheels and rails for hitch with bull or pallet truck. General characteristics: Guy Vertical tank Material Stainless steel Specifications: Volume 100 liters total (80 useful liters) Background type Klopper Envelope Structure with wheels Upper bottom tubulatures x4 Lower bottom tubulatures x1 Peepholes x1 Outer diameter body 400 mm Body height 700 mm Body height + backgrounds TOTAL: 1600 MM

Vertical tank made of stainless steel with an approximate capacity of 100 liters. Removable klopper type top bottom. With handles for extraction, with pressure gauge. In the body there are 2 electric resistors to heat the product, and 3 threaded connections (male) Conical bottom with discharge from the bottom. The discharge is blind to be able to empty the tank with the submersible pump that is inside it. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters approx Background type Conical Envelope 4 legs Outer diameter body 500 mm Body height 450 mm Body height + backgrounds (TOTAL: 1100 mm)

Key data: 300 , 1 , 1300

Payload 1000 - 1250 kg Band width 305 and 505 mm Spreading range - 375 -520 mm Coil outer diameter 1300 mm without cabinet and control

Belt curve conveyors, conveyor belt curves, belt curves 60 degrees with drive Manufacturer: Transnorm Year of Make: 2020 Condition: used Model/Type: TS 1600-090/60Degree Total length outside: approx. 1330 mm Total length inside: approx. 550 mm Dimensions: RN: 600, BN : 600, WN: 60 deg Conveyor width: approx. 600 mm Belt type: Belt with fabric insert Including side guide 200 mm high Includes SEW motor with Moyimpt version 1.1 KW r/min 2900/504 Stock: 3 pieces Price: per piece Internal Article Number: 2026032304 Conveyor technology – reliable and immediately ready for use The conveyor technology offered was in continuous operation until dismantling and is fully functional. Features: • Condition: fully functional, with usual signs of wear • Ideal for efficient and fast material transport • Professionally dismantled and packed safely for transport P ...

BECKER & VAN HÜLLEN deep drawing press was built in Germany by Becker & van Hüllen Niederrheinische Maschinenfabrik GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. In 2022, a major upgrade was carried out, which included replacing the seals, upgrading the control system, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The BECKER & VAN HUELLEN 650T is used in industries specialising in stamping, production of automotive parts, tanks and other parts that require high press force and multi-stage forming. Its main purpose is deep drawing. The machining process is performed with a high press force of up to 650 tonnes. The two-stage design allows successive forming stages to be carried out in a single work cycle, thus enabling the manufacture of parts with even the most complex shapes. The m ...

Suction conveyors with 3 kW side channel compressor various capacities available

Height pliers, parallel pliers, height transfer gauge, height transfer measuring device -Manufacturer: Hommel Werke, height transfer theory -Type: 4626 DBP -Dimensions: 165/140/H430 mm -Weight: 7.6 kg

Suction conveyors with side channel compressor and time control various capacities available

Specifications: - Total payload driven + running unit 40000 kg - Payload per container device 20000 kg - Workpiece diameter approx. 500 - 3500 mm - Center distance of the support rollers adjustable via trapezoidal thread spindle - Roll diameter 500 mm - Roll width 150 mm - driven single-sided drive - infinitely adjustable rotation speed - Handheld remote control for re- and li.-run - Drive 400 V - Both units are built on rail chassis - Space requirements Unit approx. W 3800 x H 1150 x D 1350 mm - Platzb. with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight applied. Unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Measurement data acquisition device, test device, telemetry system, Can-Bus monitoring -Gemac: CANobserver -Art.Nr.: 22550-00 -Number: 1 pieces -Dimensions: 115/50/H125 mm -Weight: 0.5 kg

Side channel pump, delivery pump -self-priming pump -Coupling Order No.: 32175/90

DC brake, braking device, electric motor brake -Manufacturer: AER, Statomat braking device type B 122420 / V16 -Current: 50 A -Operating voltage: 380 V -Control voltage: 220V -Dimensions: 160/140 / H135 mm -Weight: 1.6 kg

BUHLER impacts dehulling machines suitable for oats, sunflower, spelt, soya and some others.. Almost not used since it was in a store Very nice conception , 18 cm impact ring hence hight output till 3 tonnes per hour according to Handbook manufacturer with an integrated diaphram to set the material flow input With an integrated device to set the speed by hand ... but also be set with speed electronical variator Many other Buhler machines available for dehulling lines : scourer MHXF, paddy table enquiries welcome Shipping to any destination possible

Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, load jack thread -Load lifter: 4 pieces, holder Ø 80 mm -Shackle: M24 2 pieces per part -Price: complete -Dimensions: 250/155 / H250 mm -Weight: 36 kg / pc.

with compressed air with lift to the top Stainless steel version medium sized funnels Manufacturer: Unknown

used lift-tilt device Manufacturer: L&M Type: HKV Year of construction: 2016 Net weight: 800 kg Total weight: 1,600 kg with transport castors

used lift-tilt device Manufacturer: WAGNER UMWELTTECHNIK Type: W HKV Year of construction: 2008 Load capacity:500 kg Drive power: ___ kW

Quick-release clamping device, quick-release clamp, drilling device, drill bushings -Drilling jig: as a quick-clamping device for flat material -Transport box: incl. -Drill sleeves: Ø 12 mm, spacing 100 mm -Dimensions: 1900/150/H60 mm -Transport box: 2040/225/H280 mm -Weight: 70 kg

Quick clamping device, hydraulic clamping device, electro-hydraulic clamping device, -Manufacturer: WMW HECKERT, clamping device from milling machine FSS 315-V -Type: FHKN 3311 -Motor: VEM 0.12 kW -Dimensions: 440/150 / H220 mm -Weight: 24 kg

Construction 1976 Capacity 150 l , all Complete , ready for immediate use

Axial deep groove ball bearings, axial deep groove ball bearings, thrust ball bearings, thrust bearings -Manufacturer: FAG, axial deep groove ball bearing 51164PM, OVP -Outer diameter: 400 mm -Dimension: Ø 400 x 65 mm -Weight: 18.4 kg

Table shear cutting knife, replacement knife for table shears, replacement cutting, cutting knife, scissor knife, tape cutting device -Manufacturer: Schleicher, cutting device from conveyor system WV-SYS 160-1050 -Cutting width: max. 900 mm -Dimensions: 1400/165 / H785 mm -Total weight: 300 kg

M. No: 32781 Size: 300 x 560 mm Speed: 44.000 c/h

Measuring device for speed or frequency, tachometer, cutting speed measuring device, hand tachometer, revolution measuring device -Manufacturer: Jaquets Indicator 100REVs 10 m -Accessories: see photo -Case: original case -Dimension box: 120/85/H30 mm -Weight: 0.3 kg

Giana lathe mod. GFP14 - 710x 5300 - year 2007, control FAGOR GFP14

CONVEYOR STATION LORANDI / OLI / SIPA 30/15

Deburring pipes, rods, profiles and sheets after separation is a must. But only the right system enables cost-effective, safe and flawless deburring – namely the optimal adaptation of the machine concept and the high-performance brush to the workpiece properties and material quality.

Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, steady rest -Roller diameter: Ø 80 mm -Roller spacing: 90 mm -Dimensions: 300/100/H118 mm -Weight: 7.7 kg

Machine table for laser marking, stable design, aluminium electric height adjustment 36 cm by Rose+Krieger Additional mechanically adjustable height adjustment 4 frame feet - all adjustable Frame dimensions without table: H 121cm, W 88 cm, D 117 cm Table surface: W 80 cm x D 48 cm

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Roll diameter: 248 mm -Transport roller width: 610 mm -Hole: Ø 30 x 60 mm, Ø 25 x 75 mm -Dimensions: Ø 248 x 840 mm -Weight: 27 kg

Machine table for laser marking, lightweight design, aluminium electric height adjustment 36 cm by Rose+Krieger Additional mechanically adjustable height adjustment 4 frame feet - all adjustable Frame dimensions without table: H 121cm, W 88 cm, D 117 cm Table surface: W 80 cm x D 48 cm

High-frequency ignition device, heating, gas and oil burners -Type: E4718/54 -Dimensions: 85/70/H40 mm -Price: per piece -Number: 12x available -Weight: 0.3 kg/piece

Quick release device, quick release, quick release vice, drilling device, machine vise, drill vise, clamping sleeve, collet, clamping device -Manufacturer: VEB, clamping device type TGL30-10206 -Size: 100 x 60 mm -Clamping height: max. 70 mm -Dimensions: 180/160 / H135 mm -Weight: 7.2 kg

Cylindrical roller bearings, spherical roller bearings, deep groove ball bearings -FAG: 6218MA.C3 -Outer diameter: 160 mm -Inside diameter: 90 mm -Width: 30 mm -Price: per piece -Number: 2 pieces -Weight: 2.7 kg

Kramatorsk Model KJ1910 serial number 1913 Swing Over Bed: 1600mm Maximum Workpiece Length: 6300mm Maximum Drilling Diameter: 991mm Spindle power: 125.00kW Spindle Speed: 1 - 320 RPM Infinitely Variable power Existing Additional Chuck workholding range: 200 - 1250mm diameter, workpiece weight capacity using two open roll supports: 60,000kg, size range in closed backrest: 200 - 800mm, size range in open backrest: 630 - 1380mm, pressure head speed range: .125 - 500 infinitely variable, pressure head spindle bore diameter: 182 mm, pressure head motor power: 75kW DC, headstock speed ranges: 3, pressure head speed ranges: 2 Machine Length: 22950mm Machine Width: 4375mm Machine height: 2670mm Weight: 101091kg Condition Good

Leveling device -in: transport case -Dimensions: 240/170/H190 mm -Weight: 3.3 kg

Printing machine, embossing machine, stamping machine -without function, control: defective -pneumatic-hydraulic press - Stroke: 50mm - clearance between columns: 850 mm -Table surface: 400 x 370 mm -Dimensions: 1285/590/H1820 mm -Weight: 416 kg

Tray sealer few operating hours with shell storage shell size: 350 x 350 mm Top foil: Max. 420 mm Power 6 to 15 cycles / minute Delivery time: 2..3 weeks

Decorker, Fabr. Rink, Type: KM 670/2K as box uncorker, 2-head, 2,000 K/h, clock machine Running direction: li->re with decorker plate for 24 module box 0.33 lt, box longitudinal run attached control cabinet in VA with Siemens S7-300 control and operating module OP-Siemens

Coil inner diameter 460 - 560 mm Coil outer diameter. Max. - 1500 mm Bandwidth - 350 mm Payload 2 t without drive, adjustable. Disc brake btto - 640 kg more info on request

Key data: 400 , 1 , 470

YOC 2009 Payload 1500 kg Coil inner diameter from 470 - 630 mm Coil outer diameter. 1600 mm Speed 12 rpm Frequency Dimensions - cca 1.7 x 1.4 x 1.7 m Btto - 850 kg More info on request

Key data: 450 , 1 , 1400

Payload 1200 kg Width 450 mm Coil external diameter - up to 1400 mm Motor 1.5 kW Speed adjustable by frequency conversion Btto 500 kg

Siemens AXIOM Iconos R 200 as spare parts dispenser with the following system components: Generator Polydoros SX 65/80_Model No. 8609364 X2217 m. Bedienpult_Model No. 3157554 X2076 Tube Optitop 150/40/80 HC 0,6/1,0, Tiefenblende_Model No. 10092618_Bj. 01/2017 digital image processing Fluorospot Compact_Model No. 7144434 Gerätesteuerpult_Model No. 7030708 G5478 Image intensifier 40 cm_Model No. 3828832 V5092 Handauslöser_Model No. 9722059 G5455 Monitor Simomed HM 44_Model No. 2323464-2_Bj. 2006 Flat screen monitor Acer_Model No. V193 B_Bj. 2009 • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EX ...