127,441 used machines on RESALE, but how to find them? Machine Search
Sheet Metal Curve Cutting Machine 400 V Dimensions: 140 x 40 x 100 cm
for sale MACC Metal Circular Saw NEW 300 E HSS Circular Saw Blade 300 mm Schnittkep. up to 100 mm round Coolant pump Attack Speeds 40/80 rpm Motor 2-stage 400 V Weight approx. 150 kg Machine base can also be purchased. Further models and inquiries to FSA Maschinen AG
MACC Metal Band Saw Special 411 CSO Aut. Lowering Section cap. round up to 300 mm 2 speeds 38 + 77 m/min. Motor 1.6 kW, 400 V incl. machine base Weight approx. 530 kg
MACC Metal Circular Saw K 225 Cutting capacity round up to 65 mm Saw blade 225 mm Vise opening 75 mm Speed 52 rpm Motor 0.75 kW, 230 V Weight approx. 32 kg
MACC Metal Circular Saw NEW 315 E HSS Circular Saw Blade 315 mm Section cap. up to 100 mm round Coolant pump Attack Speeds 40/80 rpm Motor 2-stage 400 V Weight approx. 170 kg Machine base can be purchased
MACC Metal Circular Saw TRS 315 HSS Circular Saw Blade Diameter 315 mm Double vise, Opening up to 120 mm, Quick release defective mitre cuts left/right up to 45° 2 speeds
MACC Metal Band Saw TRS 275 Saw blade Ø 275 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, but can be purchased separately.
MACC Metal Circular Saw NEW 250 Saw blade Ø 250 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, can be purchased separately.
ALDURO Metal Band Saw MBS-181 Lowering of the saw arm selectable hydraulic or manual Section cap. round up to 180 mm Motor power 2 kW, 400 V Swivel saw arm 60° L / 45° R Vise opening up to 230 mm incl. coolant device and machine base Weight approx. 195 kg This saw is also optionally available with a 230 V motor
In various shapes and sizes in position. Auction-ID: A1-45979-83
Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T
incl. compressed air tank Auction-ID: A7-46287-165
Circular Metal Saw manufactured in 2005. This Elumatec AKS 134 features a saw blade diameter of 550 mm vertically and 500 mm horizontally, with a maximum profile height of 250 mm and a maximum feed of 830 mm. If you are looking to get high-quality cutting capabilities, consider the Elumatec AKS 134 machine we have for sale. Contact us for further details.
This 5-axis MSC Chemnitz BFT90/5 MSC boring machine was manufactured in 2009. It features a substantial table size of 1000 x 1120 mm with a maximum table load of 2.5 t. The machine offers impressive feed rates of 4000 mm/min and a spindle speed range of 4 â 1600 rpm. If you are looking to get high-quality boring capabilities, consider the MSC Chemnitz BFT90/5 MSC machine we have for sale. Contact us for further details.
1. Qty. 1 Second-hand slitting line Mfc.: DANIELI WEAN UNITED, LOOPCO, Built: 1994 Relocated: 2021 Raw Material CR, GI, COLOR COATING COIL Strip Width: 400 - 1,210 mm Thickness: 0.5 - 1.8 mm Slitter Stand (OD420 x ID255 10/15T=Each 30EA) Scope of supply: Uncoiler Coil Car with Coil Skid Uncoiler with Snubber Roll Coil Opener & No. 1 Pinch Roll Crop Shear Threading Table No. 2 Pinch Roll & Side Guide Slitter Stand Scrap Winder Loop Table Tension Pad with Separator Bridle Roll with Guide Table Recoiler with Separator Recoiler Coil Car with Coil Skid Hydraulic Equipment Electric Equipment 2. Qty. 1 Second-hand cut-to-length line Mfc.: DONGBU ENG Built: 1997 Relocated: 2021 Raw Material CR, GI, COLOR COATING COILS Strip width: 600 – 1540 mm Thickness: 0.5 - 2.0 mm Coil Weight Max. 15,000 Kg Sheet Length: 500 - 2,800 mm Scope of supply: Coil Car Unco ...
Metal powder alloy CASTOLIN ROTOTEC LUBROTEC 19985 medium-hard, easily machinable metal powder alloy Quantity: 1.2 kg Dimensions: 90 x 90 x 130 mm
Sheet metal centering pull-down unit GENUSTECH PM4I2V395MEMB50C-287 flange diameter: Ø 56 / 72 mm Sensor unit: SENSTRONIC A1202R6K700111 10 - 55 V DC approx. 0.2 m Connection cable New ! Dimensions: 210 x 80 x 90 mm
Metal bellows coupling ALMA ATMK 60-603036-25-30 shaft diameter: Ø 25 / 30 mm New ! Dimensions: Ø 70 x 80 mm
Metal bellows coupling R+W BKC/150/24PFN/40/XX shaft diameter: Ø 24 / 40 mm New ! Dimensions: 82 x 82 x 80 mm
Sheet metal gripper, sheet metal clamp TAKRAF K4MP 4000 kg Gripping range: 0 - 32 mm used, tested ! Dimensions: 460 x 200 x 90 mm Weight: 14.5 kg
500m^2 , thickness of 0.75 Batch that is part of a combination of batches
" Lot of casting ladles / metal ladles – approx. 500 kg – 4 pieces of batch consisting of 4 casting ladles for molten metals in different designs. Suitable for aluminum, bronze or non-ferrous metal foundries. Equipment • Crane eyes / carrying brackets • Some with inner struts • One pan with lid Condition From stock of a foundry. Sale as shown. Capacity: up to approx. 500 kg Number of pieces: 4 pieces "
Sheet metal clamp, sheet gripper TAKRAF KBH 3 ( KBH3 ) 3200 kg Gripping width: 12 / 70 mm used, tested ! Dimensions: 470 x 230 x 100 mm
Sheet metal gripper, sheet metal clamp PAGUS 2000 kg gripping range: 0 - 32 mm used, tested ! Dimensions: 330 x 190 x 100 mm Weight: 10 kg
Round materials: approx. 260–320 mm; square material: approx. 250–300 mm; infinitely adjustable cutting speed; Hydraulic lowering control
Sheet metal gripper, sheet metal clamp PAGUS 3000 kg gripping range: 0 - 32 mm used, tested ! Dimensions: 400 x 190 x 120 mm weight: 14 kg
Sheet metal clamp, sheet gripper PAGUS KBH 1 ( KBH1 ) 1000 kg Gripping width: 10 / 25 mm used, tested ! Dimensions: 300 x 220 x 130 mm Weight: 5 kg
A.B. GOTENEDS MEK. VERS manual sheet metal shear ; executed with stop; Capacity: 1.5 mm x 700 mm steel ; Stop: 340 mm
Sheet metal gripper, sheet clamp TAKRAF MLK 4000 kg Gripping range: 25 - 51 mm used, tested ! Dimensions: 560 x 200 x 110 mm Weight: 18 kg
Sheet metal clamp, sheet metal gripper TAKRAF 1600 kg Gripping range: 0 - 30 mm used, tested ! Dimensions: 330 x 300 x 75 mm Weight: 13 kg
Batch of industrial electronic units / racks (4 pieces, metal housing)
maximum number of results exceeded
please refine your search
750 € 
