We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,455 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
clamping width: 22000 mm lifting capacity: 10 t weight of the machine ca.: 17 t only for export: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: With ABUS electric chain hoist, maximum load 250 kg maximum capacity: 125 kg, throat: 5,000 mm, Approx. Onsite Dimension. (l x w x h): 5,700 x 700 x 3,600 mm, weight approx.: 500 kg
used
Ref. no.: 17507 Hersteller: DEMAG Year of construction: 1998 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg
used
This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke volume of 891 cm³, a injection pressure of 2420 bar, a shot weight of 800 g/PS and clamping force of 4200 kN. The distance between bars are 800x710 mm and the size of mould platens 1200x1100 mm.
used
This DEMAG ERGOTECH 4200-2300 Injection Moulding Machine was built in the year 1995 and has 25000 production hours. It is equipped with a Wittmann handling. The machine has a clamping force of 4200 kN and a screw diameter of 70 mm. It comes with 2 core pullers.
used
Electric hoist, crane, electric wire rope hoist, cable winch DEMAG type P 10 Fabr. No. 941 477 Year of manufacture 1962 Load capacity 2000 kg with 4 strings Lifting height 5 meters Hoisting speed 6 m/min. Fine lifting speed 1.3 m/min. Reeving 4/1 Motor power 0.6 / 2.6 kW Mains connection 380 volts, 50 Hz - Hoist DEMAG, type 19/11 K28P - Electric chassis DEMAG, type 13 / 6 K8 - 1 travel speed approx. 19 m/min - Chassis for double T-beams, beam width 120 to 180 mm - Load hook for 4 load trains - Control bottle for the hoist with approx. 2.5 meters cable length Space requirement L x W x H 1400 x 900 x 500 mm Weight 350 kg good condition; used
used
Key data: 800 kN, 149 g/PS, 35 mm
Year of construction: 1997 Clamping unit - Clamping force: 800 kN - Handle width: 400 x 400 mm - Tool installation height 250/ 700 Injection unit - Shot weight (PS): 149 g - Screw diameter: 35 mm Remark: - Dispensing without sprue picker and external Peripherals - Displacement measuring system for Screw movement changed - Hydraulic motor for worm drive Switched in 2019 - 02/2022 Hydraulic hoses changed - Cavitation in pump - Plasticizing unit is needed as a replacement for other machines and is not included! General - 2 core pulls -Machine is still in operation Pump running time - approx. 114,000h Other: -Submission expected June/ July 2024 -for the production of spare parts
used
This used DEMAG Ergotech System 1500-440/120 injection moulding machine was manufactured in 1999, equipped with handling features for enhanced productivity and ease of use. As an injection moulding machine, it offers reliable performance and precision in moulding operations, making it a valuable asset for production lines requiring high-quality plastic components. The opportunity to buy this DEMAG Ergotech System 1500-440/120 injection moulding machine represents a strategic investment for businesses looking to upgrade or expand their manufacturing capabilities. For more details, please contact us.
used
This used injection moulding machine manufactured in 2001 by DEMAG, model D125-320h/120v, comes with handling features, designed to optimize production efficiency and reliability. A robust example of engineering excellence, this machine stands out for its precise performance and durability. The technical specifications highlight its adaptability to various production requirements, making the DEMAG D125-320h/120v machine we have for sale a valuable asset for any production line seeking quality and consistency. For further details, please contact us.
used
Injection unit Screw diameter: 35 mm Calculated injection volume: 154 cm3 Length/diameter ratio: 20 L/D Max. injection rate: cm3/s Material pressure: 2790 bar Closing unit Closing force : 1300 kN Distance between tie-bars: 520 x 520 mm Platen dimensions: 725 x 725 mm General Total installed power: 9.4 kW Other Equipment : Process INTELECT 2 FULL ELECTRIC 2 Hydraulic cores 1 AIR core EUROMAP 67 Commissioning: 2019 Hours: 3300 h Tonnage: 130
used
This injection moulding machine was manufactured in 1999. The DEMAG D110-310H/120V stands out for its robust design and reliable performance over the years. Known for its efficiency in production environments, this model has been a staple for businesses seeking to enhance their manufacturing capabilities. This DEMAG machine we have for sale represents an opportunity to acquire proven machinery with a track record of success. For further details, please contact us to discuss how this machine can meet your needs.
used
This injection moulding machine, manufactured in 2000 by DEMAG, model Ergo-Tech 350 Concept, comes with handling technical specifications, making it a prime choice for efficient and reliable production. Its design emphasizes durability and ease of use, suitable for a wide range of injection moulding applications. The DEMAG Ergo-Tech 350 Concept machine we have for sale represents an opportunity to enhance your manufacturing capabilities with a proven, quality piece of equipment. For further information, please contact us.
used
This DEMAG Ergo-Tech 110-310H-120V injection moulding machine was manufactured in 2002, offering precision and reliability for various production needs. Its notable for its efficiency and ease of use, designed to streamline manufacturing processes. This DEMAG machine we have for sale represents a solid addition to any production line, enhancing output with its proven performance. Contact us for further details.
used
Hoist: DH 312 H12 Equipped with vaccuum pump + tank Kind of: overhead travelling crane Capacity: 5 ton Span: 16 350 mm Tackle speed: 1,3 & 8 m/min Numbre of riggers : single rigger
used
pillar-mounted slewing crane:: mobil arm length: ca. 2500 mm weight of the machine ca.: 4 t weight max. in kg: 125 kg bucket net weight: 430 kg bucket filling weight: mindestens 416 kg bucket - total weight: mindestens 846 kg max. wheel load: 391 kg max. support load: 544 kg : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Suspension crane: 2 Stück: : 1. Kran : dimensions: 2500 x 3800 mm : 125 kg : 2. Kran: dimensions: 2500 x 4800 mm : 125 kg for expample for assembly work: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 4200 kN
Demag Ergotech Concept 420/810-2300 with the Sepro Success 33 robot Year of construction: 2006 Injection unit: Screw diameter: 60 mm Spray weight: 800 g Injection pressure: 2420 bar Dosing volume: 891 ccm Clamping unit: Clamping force: 420 t Tie bar spacing: 800x710 mm Size of clamping plates: 1200x1100 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC 4 Additional equipment: Machine in very good technical condition Euromap 67 Robot Interface Air Valve x 4 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the movable plate x 2 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the fixed plate x 2 Hot runner control x 18 Injection unit hardened - Bimetal Central lubrication Parallel Movements Built-in print quality control system from Sensor Kistler - tool pressure measurement ...
used
Key data: 1100 kN
Demag Ergotech Multi 1100-310H/80V / Production line with the Wittmann-Demag W721 robot / Very good technical condition Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 195 g Spray pressure: 1550 bar Dosing volume: 219.8 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Size of clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Production line with turntable, Wittmann-Demag W721 robot, conveyor belt and protective housing 2K Machine Air Valve x 4 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 22 mm Parallel Movements Original turntable Robot Wittmann-Demag W721 Year of construction: 2007 4-axis robots: 4 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1 ...
used
Key data: 800 kN
Demag Ergotech Compact 800/420-200 Year of construction: 2000 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 400x400 mm Size of clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Machine was not in use in an ongoing production. This was only used to test the tools It is possible to change the screw diameter Metrics: Weight: 4000 kg Length/Width/Height: 3.90x1.40x1.90 m Drive: Pumps/motor: 18.5 kW Heating capacity: 7.5 kW Total power: 26 kW All offered machines are started by our service technicians before they are sold. It is possible to ...
used
Key data: 800 kN
Demag Ergotech System 80/420-430 Year of construction: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Dosing volume: 231 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Size of clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Euromap 67 Robot Interface Air valve x 2 Hydraulic Core Pull x 3 Control with hot runners Injection unit hardened - Bimetal Built-in printer It is possible to change the screw diameter Metrics: Weight: 4100 kg Length/Width/Height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
used
Key data: 500 kN
Demag Ergotech Compact 500-200 / Machine in very good technical condition Year of construction: 1997 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 355x355 mm Size of clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Hydraulic core pull x 1 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 7.5 kW Total power: 22.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical te ...
used
Key data: 500 kN
Sumitomo Demag IntElekt 50/370-80 / Electric Machine Year of construction: 2009 Injection unit: Screw diameter: 25 mm Injection weight: 39 g Spray pressure: 1580 bar Dosing volume: 44 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 370x370 mm Size of clamping plates: 520x570 mm Ejector: electric Clamping unit: toggle lever Control: NC5 - Touchscreen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot Interface Air Valve x 4 Control with hot runners Injection unit hardened - Bimetal Central lubrication It is possible to change the screw diameter Metrics: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected m ...
used
Key data: 500 kN
Demag Ergotech Compact 500-120 / machine in very good technical condition Year of construction: 1993 Injection unit: Screw diameter: 25 mm Spray weight: 54 g Spray pressure: 2000 bar Dosing volume: 61.3 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 355x355 mm Size of clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 1 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 5.1 kW Total power: 20.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live ...
used
Key data: 250 kN
Demag Ergotech Compact 250-80 Year of construction: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g Injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: Clamping force: 25 t Tie bar spacing: 280x280 mm Size of clamping plates: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 2600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in ...
used
Pillar jib crane, hall crane, workstation crane -Manufacturer: ABUS, column jib crane type VS load capacity 1000 kg year of manufacture 1985 -Documents: crane inspection book, operating instructions, -Base plate: Ø 685 mm -Projection: 4,390 mm -Total height: 4,350 mm -Hook height: 3,140 mm -Chain hoist: DEMAG type PK5N with main stroke 5 m/min, built in 1973 -Chain length: 3300 mm -Transport dimensions: 950/4630/H1890 mm -Own weight: 1160 kg
used
maximum capacity: 250 kg, throat: 4,000 mm, Approx. Onsite Dimension. (l x w x h): 4,000 x 600 x 3,400 mm, weight approx.: 1,000 kg
used
Description: including Demag electric chain hoist, maximum load capacity 500 kg maximum capacity: 500 kg, throat: 4,000 mm, Approx. Onsite Dimension. (l x w x h): 4,600 x 600 x 4,750 mm, weight approx.: 1,000 kg
used
used
This DEMAG Ergo-Tech 250-1450 injection moulding machine was manufactured in 1995. It comes equipped with handling capabilities, tailored for intricate and precise manufacturing processes. This machine represents a blend of durability and efficiency, making it a solid addition to any production line looking for versatile moulding solutions. The DEMAG Ergo-Tech 250-1450 we have for sale offers reliability and a robust build, ensuring longevity and consistent performance in demanding environments. For further details on this machine, please contact us.
used
Pillar jib crane, hall crane, workstation crane -Manufacturer: ABUS, column jib crane type VS load capacity 500 kg -Documents: crane inspection book, operating instructions, -Base plate: Ø 710 mm -Projection: 3045 mm -Total height: 4,075 mm -Hook height: 3,305 mm -Chain hoist: DEMAG type DKUN5-500KV1F4 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Chain length: 3300 mm -Transport dimensions: 3850/810/H1110 mm -Own weight: 720 kg
used
Clamping unit Clamping force350 ton Opening stroke675 mm Distance between tie bars630 x 630 mm Mould height min.330 mm Mould height max.710 mm Platen size (h x v)950 x950 mm Injection unit Screw diameter70 mm Injection volume1212 cm³ Shot weight1090 g Injection pressure1877 bar Measurements and weight Dimensions6,5 x 1,9 x 2,2 m Machine weight 16000 kg this extra information is standard for this model. Please always double-check the details during a visit The DEMAG Ergotech System 3500-2300 NC4 Injection Molding Machine, introduced in 2002, exemplifies precision and efficiency in plastic molding technology. Renowned for its advanced features and superior performance, this model has become a cornerstone in the injection molding industry. At its core, the Ergotech System 3500-2300 NC4 excels in injection molding operations with unparalleled accuracy and speed. ...
used
Screw diameter: 40 mm Calculated injection volume: 231 cm3 Length/diameter ratio: 20 L/D Pressure on the material: 2020 bars Closing unit Minimum mold thickness: 800 mm Max distance between trays: 650 mm Passage between columns: 420 x 420 mm Dimensions of trays: 590 x 600 mm General Heating power: 22 kW Total installed power: 33 kW Oil quantity: 180 L Dimensions: 4.2 x 2 x 1.4 m Weight: 4000 Kg Other Commissioned: 2007 Tonnage: 80
used
This DEMAG Ergotech 150-610 Compact Injection Moulding Machine was built in the year 1998 and has 13860 pump hours. It is equipped with a Demag NC IV control unit. The machine has a clamping force of 1650 kN and a screw diameter of 40 mm.
used
Clamping force: 50 t Tool height: 210 mm Opening distance: 400 mm Platten dimensions: 520 x 520 mm Clearance between tie bars: 355 x 355 mm Screw diameter: 30 mm Specific injection pressure: 1990 bar Injection volume: 106 cm3 Shot weight: 94 g Dimensions(m) LxWxH: 3.7m x 1.4m x 1.8m Weight: 2900 kg Condition: working
used
volume capacity: 5,63 m³/min suction: 1 bar pressure: 8 bar turning speeds: 3000 U/min engine output: 37 kW dimensions of machine L x W x H: 1,35 x 1,05 x 1,43 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
E-chain hoist, electric hoist, crane DEMAG type PK 5N-F Fabr. No: 1742591 Year of construction 1971 Load capacity 1000 kg Hook travel 3 meters Distance suspension to load hook 600 mm Main lifting speed 10 m/min. Fine lifting speed 2.5 m/min. Cable length service bottle approx. 1.8 meters Mains connection 380 volts, 50 Hz - 2 load strings = 1000 kg Own weight 55 kg good condition; used
used
Were parting with our 2 injection molding machines following a reorganization of our workshop. The 1st press were selling is an Engel 200/50 HL-ST (photos in attachment), which works well but has a few jerks during the injection phase, but is functional. The 2nd press is a Demag Ergotech 150-600 (photos in PJ), which works but has a few problems, and can no longer be considered a 150T but rather a 90T (pump wear).
used
crane remote control, radio receiver, receiver, crane radio remote control, radio control system, crane control, radio remote control, radio remote control -Manufacturer: NBB, radio remote control with charger -Type: SL 48-2/MOV HF:SM 430 -Charger: LAD 0470 -Total dimensions: 230/210/H170 mm -Weight: 3.2 kg
used
load 1.000 - 2.000,-kg. More then 300 machines new and second hand on our seema .de
used
Closing unit Clamping force [kN] 5000 Dimensions of mounting plates (hxv) [mm] 1300 x 1200 Clearance between columns (hxv) [mm] 900x800 Min./max. mold height [mm] 400-880 Maximum opening width [mm] 1690 Injection unit Screw diameter [mm] 80 Injection volume [cm3] 1779 Injection weight [g] 1619 Injection pressure [bar] 1855 Electrical and hydraulic equipment Rated power of the pump motor [kW] 86 Heater power [kW] 30.6 Dimensions and weight Net weight with control cabinet [t] 23.34 Dimensions (length x width x height) [m] 8.7 x 2.4 x 2.5
used
Other Info: 32000 Overhead travelling craneDEMAG - Double Gider Crane MACH-ID 8715 Make: DEMAG Type: Double Gider Crane Year: 1995 Span: 17.090mm Lift height: 7000mm Capacity Kg: 32000 Lifting speed:5 and 20 M/Min Remote control:Yes Length: 19000mm Width: 3900mm Height: 1900mm Weight: 15300kg
used
CONTROLS PLC SIEMENS FEEDSTOCK STEEL STRIP sheet width max.: 450 mm sheet width min.: 90 mm sheet thickness max.: 13 mm sheet thickness min.: 2 mm exterior coil diameter max.: 1900 mm exterior coil diameter min.: 1100 mm internal coil diameter max.: 760 mm internal coil diameter min.: 610 mm PRODUCT (PROFILE, TUBE) external diameter min.: 30 mm external diameter max.: 140 mm wall thickness min.: 2 mm wall thickness max.: 12 mm length min.: 4000 mm lenght max.: 10000 mm LINE CHARACTERISTICS Forming Process: rollforming welding process: HF inductive sawing process: travelling speed max.: 65 m/min feedstock transport direction: left to right Line consis ...
used
Stahl Folding Machine Dimensions 70x100 Model Year: 1987 4 Bags 4 Axes 3 of the axes are in working condition 1 of them requires maintenance
used
Engine power 4.0 (5.2) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 875 mm width 735 mm Height 1410 mm Weight 55 kg material Steel painted Hoehe ejection in 450 mm ; New machine - best condition
used
Bridge crane for Ausseneinsatz Fabrikat steel - built 2007 Traglast 60 t - 16 m track width - height 8 m with enhances crane runway - completely screwed approx. 66 m long
used
Falzmaschine - Folding Machine Stahl T 36/6-6-KB Baujahr / Year 1997 Flachstapelanleger / Flat Pile Feeder Falztyp: 6 Taschen - 6 Taschen - Schwert Folding Type: 6 buckles - 6 buckles - 1 knife Format / Size: min. 80 x 100mm - max. 360 x 650mm Papiergrammatur / Paper weight: 40 – 250g/m² Stapelhoehe / Pile height max. 580mm Geschwindigkeit / Speed min. 10 m/min. - max. 160m/min. Durchmesser Falzwalzen / Diameter of folding rollers 32mm Auslage Schuppenauslage / Delivery Stream Delivery Kompressor / Compressor include - Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect
used
Sell a used demagnetization device Dimensions 22506001280mm with conveyor belt. Bandwidth 300mm Passage 400mm diameter, height conveyor belt top edge / height passage 280mm Tiede type ET400 8Kw 16A / 400V connection
used
used
used