demag stahl used for sale

Key data: 600 kN, 94 g/PS, 30 mm

Clamping force: 60t Year of Make: 2001 Injection weight in hp: 94g Injection Unit .../200 Screw diameter 30 mm Spec. Spray pressure 1995 bar Injection volume 106 cc Injection weight in hp 94 g L/D Screw Ratio 20 Clamping unit 600/... Clamping force 60 t Size of the clamping plates 600 x 600 mm Lights spar spacing 420 x 420 mm Tool installation height 200 mm Opening way 550 mm Max. panel spacing 750 mm Weight 3950 kg Dimensions(m) LxWxH 4.2 x 1.4 x 2.0 m Year of construction 2001 Control type NC4

Overhead crane, crane, trolley, crane running gear, crane trolley, girder trolley, head girder for bridge cranes, ceiling crane head girder, head girder single girder bridge crane -Manufacturer: Demag, 1 set of end girders for single girder bridge crane -Type: ELV -Load capacity: kg -Carrying rollers: Ø 160 mm -Hole spacing: 290 mm Ø 20 mm / Dimensions see photos -Transport dimensions: 2355/365/H245 mm -Weight: 302 kg

Additional title: Slewing crane, Maximum load: 2000 kg, Reach: 4 m , Lifting height: 3 m, Length: 4,00 m, Height: 4,61 m

B&A REF:  9314 TON: 420 SCREW DIAMETER:  70MM SHOT WEIGHT:  1090 STROKE VOLUME:  1212CM3 INJECTION PRESSURE:  1877AR PLATEN SIZES:  1200 X 1100MM DBTB: 810 X 710MM MIN MOULD HEIGHT:  380MM MAX MOULD HEIGHT: 820MM MOULD OPENING STROKE:  710MM MAX DAYLIGHT:  1530MM EJECTOR STROKE:  230MM CONTROLS:  NC4 CORE PULLING: 2 AIR VALVES: 3 MOTOR: 45 HEATING CAPACITY: 27KW ROBOT INTERFACE: EUROMAP SCREW DRIVE:   HYDRAULIC

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Volume flow rate: 7.3 m³/min -Engine power: 45 kW -Max. pressure: 10 bar -Mileage: 65,305 h -Weight: 1200 kg

screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:100 kN

Bridge crane for Ausseneinsatz Fabrikat steel - built 2007 Traglast 60 t - 16 m track width - height 8 m with enhances crane runway - completely screwed approx. 66 m long

Falzmaschine - Folding Machine Stahl T 36/6-6-KB Baujahr / Year 1997 Flachstapelanleger / Flat Pile Feeder Falztyp: 6 Taschen - 6 Taschen - Schwert Folding Type: 6 buckles - 6 buckles - 1 knife Format / Size: min. 80 x 100mm - max. 360 x 650mm Papiergrammatur / Paper weight: 40 – 250g/m² Stapelhöhe / Pile height max. 580mm Geschwindigkeit / Speed min. 10 m/min. - max. 160m/min. Durchmesser Falzwalzen / Diameter of folding rollers 32mm Auslage Schuppenauslage / Delivery Stream Delivery Kompressor / Compressor include - Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Heidelberg Stahlfolder TD-94, Round Pile Feeder RD-94, Folding unit TD-94, 6 Buckles manually adjustable, Delivery SB-86 MP.D;, Year of manufacture: 2005 Condition: Used, Construction year: 2005, State: Second hand

Drying plant aluminum for corn and grain, Direct air heater 1200 KW, Weishaupt burner L5, 1 fans 30 KW, wet elevator galvanized, control cabinet. Mob. + 491715213204

Crane hook Capacity: 0,7 tons Crane hook is fully functional, but not suitable for our requirements.

; operational

feeder: • pallet feeder • machine number (feeder) 34103/88 • counter EVZ 30 1st folding unit: • pre-slitter shafts • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • working width max. 94cm • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit • working width max. 66cm • 2 buckle plates • rear-mounted slitter shafts • noise prevention Still in operation: No Available: sofort

Size max 320 x 250 mm min 160 x 120 mm Pile height 50 mm Infeed height max 850 mm min 350 mm Speed max 50-100 m/min ; working condition

1 factory-tested, very well-preserved single-girder crane with angle trolley load approx. 4,000 kg Load trolley CA 5,000 kg Wingspan approx. 7.100 mm Make steel Year of production / workshop testing 1986/2016 Crane radio control equipped with angle trolley for a perfect hook road, Working speeds: Hoist 0.5/3.25 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

1 factory-tested single girder overhead travelling crane lifting capacity 5000 kg Span around 10,000 mm Hook way max. 5.000 mm Make steel Year of production/workshop test 1983/2016 Crane equipped with steel monorail trolley, freely movable floor control Working speeds: Hoist 0.5/3.4 m / min Trolley gear 16.0 m / min Crane chassis 4.0/16.0 m / min

1 factory-tested, very well preserved single girder crane angle load approx. 5,000 kg Wingspan approx. 10,000 mm Hook path about 7,500 mm Make steel Workshop examination 2016 Floor control equipped with angle trolley for optimal hook path, freely movable working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 4.0/16.0 m / min

1 factory-tested single angle crane in design with laterally movable carrier trolley Load approx. 5,000 kg Span approximately 33,000 mm Hook way max. 9000 mm Make AUMUND/steel Year of production/workshop test 1981/2016 with steel angle trolley for maximum hook path, DEMAG Kranfahran- drove, corridor control freely movable Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear 10.0/40.0 m / min Crane chassis up to 60.0 m / min

1 factory-tested double girder overhead travelling crane Load approx. 6,300 kg Wingspan approx. 14,000 mm Hook path Max 10.000 mm Make steel Workshop examination 2016 Crane equipped with steel double girder trolley, corridor control working speeds: Hoist approx. 0.8/10.0 m / min Trolley gear approx. 14.0 m / min Crane chassis 10.0/40.0 m / min