demag stahl used for sale

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: 6x Option key, 2-stage -Connector: 16-pin -Transport dimensions: 630/370/H140 mm -Weight: 5 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control unit control head -Type: DSM5 CSA Type 4 -Connector: Cable see photos -Transport dimensions: 390/200/H210 mm -Weight: 2.5 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter flow rate: 6 l/min -Hydraulic tank -Hydraulic valve -Weight: 110 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control -Type: DST7SP222 BE -Identification number: 874 558 44 -Buttons: 1x emergency stop, 6 buttons 2-stage -Transport dimensions: 590/94/H90 mm -Weight: 2.4 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Handover: in its current condition as seen, see photos -Condition: the switching elements are missing -Manufacturer: Demag, control switch for crane remote control with cable -Type: DSE -Connector: 16-pin -Transport dimensions: 600/330/H140 mm -Weight: 3.5 kg

Demag 1000kg 13/3PF4, Electr. Trolley + C Rail Cable Cable Trolley Chain Hoist Total weight approx. 80 to 120 kg. Good used condition, full function. The cover caps on the hand control unit are missing. Ride back and forth at one speed each. Lifting and lowering at two speeds each. There are 3 C rails with associated connectors. Total length approx. 14m. Including flat cables and sufficient cable trolleys that run in the C rails. Except for the H-beam, the system is then complete.

Key data: 600 kN, 94 g/PS, 30 mm

Clamping force: 60t Year of Make: 2001 Injection weight in hp: 94g Injection Unit .../200 Screw diameter 30 mm Spec. Spray pressure 1995 bar Injection volume 106 cc Injection weight in hp 94 g L/D Screw Ratio 20 Clamping unit 600/... Clamping force 60 t Size of the clamping plates 600 x 600 mm Lights spar spacing 420 x 420 mm Tool installation height 200 mm Opening way 550 mm Max. panel spacing 750 mm Weight 3950 kg Dimensions(m) LxWxH 4.2 x 1.4 x 2.0 m Year of construction 2001 Control type NC4

Overhead crane, crane, trolley, crane running gear, crane trolley, girder trolley, head girder for bridge cranes, ceiling crane head girder, head girder single girder bridge crane -Manufacturer: Demag, 1 set of end girders for single girder bridge crane -Type: ELV -Load capacity: kg -Carrying rollers: Ø 160 mm -Hole spacing: 290 mm Ø 20 mm / Dimensions see photos -Transport dimensions: 2355/365/H245 mm -Weight: 302 kg

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Volume flow rate: 7.3 m³/min -Engine power: 45 kW -Max. pressure: 10 bar -Mileage: 65,305 h -Weight: 1200 kg

Crane bottle, crane hook, load hook, single hook -Manufacturer: Demag, crane hook, load hook, load capacity kg -Type: PS P/A 5 -Hook opening: 50 mm -Dimensions: see photos -Dimensions: 400/220/130 mm -Weight: 15.5 kg

Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, Rope roller cover set -Lid: Dimensions see photos -Bore: Ø 55 mm -Quantity: 1 set available -Transport dimensions: 350/345/H70 mm -Weight: 5.6 kg

Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, Rope roller cover set -Lid: Dimensions see photos -Bore: Ø 55 mm -Quantity: 1 set available -Transport dimensions: 350/345/H70 mm -Weight: 5.6 kg

Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, Rope roller cover -Lid: 345 x 340 mm / Dimensions see photos -Bore: Ø 55 mm -Quantity: 1 piece available -Transport dimensions: 345/340/H60 mm -Weight: 2.8 kg

Bridge crane, overhead crane, bearing housing, trunnion, bearing block, swivel mounting, bearing housing for crane hooks, crane hook bearing -Manufacturer: Demag, bearing housing crane hook bearing -Type: P5013 STB No. 6 -Bore: Ø51 mm -Dimensions: see photos -Dimensions: 180/130/55 mm -Weight: 6.0 kg

Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details.

Gearboxes, spur gears, bevel gears, worm gears, crane gearboxes -Manufacturer: Demag, Gearbox type 52 DF -Translation: i = 10.7 -Shaft: Ø 25 x 60 mm -Dimensions: 230/252/H252 mm -Weight: 17.2 kg

Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 260 mm, unused -Groove width: 24 mm -Hole: Ø 50 x 45 mm -Number: 2x pulley available -Price: per piece -Dimensions: Ø 260 x 45 mm -Weight: 6.6 kg/pc.

Demag hoist 10 ton Kind of: hoist Capacity: 10 ton Drop: 6,5 meter Tackle speed: 0,6 & 6 m/min

Two DEMAG MC 85 mobile cranes are available, with a displacement of 5,652 cm³ and a weight of 20 tons, complete with documentation. On-site inspection is possible.

Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 420 mm -Item No.: 829676.44-01 -Groove width: 37 mm -Hole: Ø 70 x 55 mm -Quantity: 1x pulley available -Dimensions: Ø 420 x 50 mm -Weight: 20.1 kg

Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 330 mm -Groove width: 32 mm -Hole: Ø 110 x 45 mm -Quantity: 1x pulley available -Dimensions: Ø 330 x 45 mm -Weight: 18.2 kg/pc.

Bridge crane, overhead crane, disc brake, crane brake, disc, drum and storm brakes, traveling crane brake, brake ring, conical brake disc -Manufacturer: Demag, brake ring for conical brake disc, unused -Type: 089 746 84 KB 160 RIW -Dimensions: see photos -Dimensions: Ø 278 x 35 mm -Weight: 1.0 kg

Key data: 10000 kN, 110 mm

DEMAG Ergotech 1000/1400-8000 -1000T Year : 2001 Screw diameter : 110mm Plasticizing capacity (g/s): 130 Injection capacity (cm³/s): 780 Injection pressure (bar): 1815 bar Injection volume (cm³): 4370 cm³ Mold thickness (min/max): 500 x 1200mm Distance between tiebars : 1400 x 1120mm Platen dimensions (h x w): 1950 x 1670mm Closing stroke: 1250mm Centering ring diameter: 250mm Ejection passage diameter: 160mm Ejection stroke: 350mm Optional: Sequential injection, 6 hydraulic cores, 2 pneumatic cores, ejection plate, and bimetallic sleeve screw. + Robot Star ref TX 1800 EMI

Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley, running trolley, trolley, monorail trolley -Manufacturer: Demag, Running gear, Chassis type RU 3 DK -Load capacity: 300 kg -Dimensions: see photos -Quantity: 1x chassis available -Dimensions: 170/148/H135 mm -Weight: 2.1 kg

Bridge crane, overhead crane, disc brake, crane brake, disc, drum and storm brakes, traveling crane brake, brake ring, conical brake disc -Manufacturer: Demag, brake ring for conical brake disc, unused -Type: 628 626 44 RIW -Dimensions: see photos -Dimensions: Ø 310 x 37 mm -Weight: 1.0 kg

Crane control system, controller, counter -Manufacturer: DEMAG, Crane control controller -Type: PRVZ2-A00 -Item No.: 52501784 -Voltage: 220 V -Dimensions: 110/60/H75 mm -Weight: 0.3 kg

Clamping force: 3000kN, locking force: 3300kN, max. opening stroke: 670mm, min. mould installation height: 330mm, max. mould installation height: 710mm, max. distance between mould platens: 1380mm, mould platen dimensions: 1040x950mm, distance between tie bars: 720x650mm, max. mould weight: 4.7t, max. weight on moving mould platen: 2.4t, max. weight on fixed mould platen: 3.6t, ejector stroke: 200mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 50mm, L/D ratio: 20, injection pressure at 400°C: 2426bar, shot volume: 530cm³, shot weight (PS): 480g, max. metering stroke: 270mm, max. nozzle stroke: 470mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 110kN, installed barrel heating capacity: 14.8kW, material hopper capacity: 110l, oil tank capacity: 700l, electric screw drive: 38kW, electric clamping unit drive: 37kW, pump unit power: 22kW, total installed p ...

Clamping force: 2000kN, locking force: 2200kN, max. opening stroke: 570mm, min. mould installation height: 310mm, max. mould installation height: 660mm, max. distance between mould platens: 1230mm, mould platen dimensions: 830x830mm, distance between tie bars: 560x560mm, max. mould weight: 3.3t, max. weight on moving mould platen: 1.7t, max. weight on fixed mould platen: 2.5t, ejector stroke: 180mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 45mm, L/D ratio: 20, injection pressure at 400°C: 2402bar, shot volume: 358cm³, shot weight (PS): 330g, max. metering stroke: 225mm, max. nozzle stroke: 400mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 80kN, installed barrel heating capacity: 13kW, material hopper capacity: 70l, oil tank capacity: 500l, screw drive: 32kW, clamping unit drive: 32kW, pump unit power: 15kW, total installed power: 92kW, continuous  ...

Crane control system, controller, safety control system, safety switch, safety sensor, overload release power sensor, gear limit switch -Manufacturer: DEMAG, Crane control gearbox limit switch set, original packaging -Type: DGS 3 -142 -Item No.: 875 200 44 -Cardboard dimensions: 250/120/H115 mm -Weight: 1.0 kg

Crane bottle, crane hook, load hook, single hook, lower bottle, lifting bottle -Manufacturer: Demag, crane hook lower block -Load capacity: 500 kg -Hook opening: 32 mm -Dimensions: see photos -Dimensions: 240/90/60 mm -Weight: 1.7 kg

Load measuring device, overload protection -Manufacturer: Demag, Load measuring device, overload protection, original packaging -Type: MGS 1.25/2.75 -Item No.: 49189444 -Individual components: see photos -Cardboard dimensions: 290/220/60 mm -Weight: 1.1 kg

Key data: 2500 kN

Demag Ergotech Compact 250-80 Year of Make: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g Spray pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: Clamping force: 25 t Tiebar spacing: 280x280 mm Size of the clamping plates: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. ...

Load measuring device, overload protection -Manufacturer: Demag, Load measuring device, overload protection, original packaging -Type: MGS 0.63/2.20 -Item No.: 49169244 -Individual components: see photos -Cardboard dimensions: 285/220/60 mm -Weight: 1.1 kg

Key data: 500 kN

Sumitomo Demag IntElekt 50/370-200 / Electric Machine Year of Make: 2009 Injection unit: Screw diameter: 25 mm Injection weight: 39 g Spray pressure: 1580 bar Dosing volume: 44 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 370x370 mm Size of the clamping plates: 520x570 mm Ejector: electric Clamping unit: toggle lever Control: NC5 - Touch Screen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Control with hot runners Hardened injection unit - Bimetal Central lubrication It is possible to change the screw diameter Dimensions: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected m ...

Key data: 800 kN

Demag Ergotech System 80/420-430 Year of Make: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Spray pressure: 2020 bar Dosing volume: 231 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/Width/Height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 1000 kN

Sumitomo Demag Systec 100/420-310 with the Sepro SR SDR11 S3 TRANS robot / hybrid machine Year of Make: 2013 Injection unit: Screw diameter: 35 mm Injection weight: 149 g Spray pressure: 2024 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 100 t Spar spacing: 420x420 mm Size of the clamping plates: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Sepro SR SDR11 S3 TRANS Year of Make: 2013 5-axis robot: 3 axes are driven by servo motors (el ...

Electric motor, three-phase motor for geared motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: Demag, crane motor brake motor type KBV 71 A 2 -Power: 0.2 kW -Speed: 2550 rpm -Shaft: Ø 14 x 25 mm -Design: B14 -Dimensions: 275/138/H210 mm -Weight 10.2 kg

Key data: 3500 kN

Sumitomo Demag Systec 350/720-2300 / Production line with the Wittmann-Demag DR853 robot Year of Make: 2015 Injection unit: Screw diameter: 70 mm Injection weight: 1103 g Spray pressure: 1877 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 350 t Tiebar spacing: 720x720 mm Size of the clamping plates: 1040x1060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Control with air valve Control with hot runners x 5 Hardened injection unit - Bimetal Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable power Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Wittmann-Demag DR853 Year of Make: 2016 6-axis robot: 5 axes are driven by servo motors (electric) ...

Key data: 3500 kN

Sumitomo Demag Systec 350/720-2300 / Production line with the Wittmann-Demag DR833 robot Year of Make: 2012 Injection unit: Screw diameter: 70 mm Injection weight: 1103 g Spray pressure: 1877 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 350 t Tiebar spacing: 720x720 mm Size of the clamping plates: 1040x1060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull controlled with proportional valve x 1 Control with hot runners x 5 Hardened injection unit - Bimetal Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable power Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Wittmann-Demag DR833 Year of Make: 2011 4-axis  ...

Hydraulic injection moulding machine manufactured in 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 features a clamping force of 1600 kN and a tie bar distance of 520 mm. The machine includes an injection unit with a screw diameter of 40 mm, 45 mm, and 50 mm, and a maximum shot weight of 313 g. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 160/520-600 machine we have for sale. Contact us for further details.

Crane remote control, crane control, crane control, pendant control, control switch, control bottle, command switch -Manufacturer: Demag, Demag Manulift control switch with crane hook -Control switch: Type DSM4 -Crane hook: Load capacity 250 kg -Transport dimensions: 360/170/H200 mm -Weight: 3.3 kg

Key data: 6500 , 95

Demag 650 T type Ergotech 650-520 Année : 1997 Commande : NC4 Force de fermeture: 650 T Diamètre vis : 95 mm Volume injectable : 2835 cm3 Poids de l’injection en PS : 2550 gr Pression d’ injection : 1832 bars Course d’ouverture : 930 mm Distance entre colonnes : 1000 x 900 mm Dimensions des plateaux. : 1450 x 1350 mm Epaisseur min max moule. : 450 - 950 mm   Dimensions presse : 5,50 x 2,40 x 2,20 m Poids machine. : 35 500 kg ( 23500 kg + 12000 kg )

This DEMAG Ergotech Compact 125-440 hydraulic injection moulding machine was manufactured in 1998. Contact us for more information.

B&A REF: 9291 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 402 STROKE VOLUME: 442CM3 INJECTION PRESSURE: 1946AR PLATEN SIZES: 770 X770MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 275MM MAX MOULD HEIGHT: 585MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 1085MM EJECTOR STROKE: 160MM CONTROLS: NC5 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 22 SERVO DRIVE HEATING CAPACITY: 14.8KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC

Overhead crane construction / rails / double T beam HEB - IPE Construction for bolting together from supports and crane runway rails Supports : 10 x HEB 160 at a height of 3.86 m 4 x IPE 300 at a height of 3.86 m AND Crane runway rails (welded on it with square solid material 30 x 40 mm) for screwing to the supports : 2 x IPE 300 in 13 m length 1 x IPE 300 in 11 m length 1 x IPE 300 in 7 m length For Sale Complete, total weight is about 5 tons. Price 6000 Euro net + 1140 Euro ( 19 % VAT) = 7.140,00 Euro gross VAT can be declared Price includes loaded onto truck. Viewing by appointment Shipping available for an extra charge

Demag Jib crane 125 kg Kind of: jib crane Capacity: 125 kg Span: 4000 mm Drop: 2000 mm

Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, rope roller cover set, unused, original packaging -Type:280 2/1 -Item No.: 47926133 -Lid: Ø 350 mm -Quantity: 1 set available -Transport dimensions: 460/460/H120 mm -Weight: 5.8 kg

Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, rope roller cover set, unused, original packaging -Type: 2/1 2m -Item No.: 82930533 -Lid: Dimensions 450 x 450 mm -Quantity: 2 sets available -Price: per set -Transport dimensions: 460/460/H120 mm -Weight: 11.5 kg/set

Friction wheel, running wheel, bridge crane, overhead crane, assembly crane, workstation crane, crane wheel, flanged wheel -Crane wheel: Flanged wheel, heavy-duty flanged wheel -Type designation: DG 009 232 0613/BM 59834544 -Impeller diameter: 225 mm -Track width: up to 55 mm -Hole: Ø 60 x 55 mm -Quantity: 1 piece available -Dimensions: Ø 255 x 85 mm -Weight: 8.5 kg

Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley, running trolley, trolley, monorail trolley -Manufacturer: Demag, Running gear, Chassis type EU/RU 11 DK Ovp -Item No.: 84010344 -Load capacity: 1350 kg -Dimensions: see photos -Quantity: 1x chassis available -Cardboard dimensions: 280/220/H130 mm -Weight: 12 kg