demag stahl used for sale

Backhoe bucket, excavator bucket, demolition bucket, trench bucket, excavator bucket -Execution: stable -Width: 485 mm -Height: 450 mm -Depth: 620 mm -Admission intermediate dimension: 141 mm -Bore mounting: Ø 40 mm -The mounting on the spoon can be changed by us at an additional cost -Own weight: 90 kg

Width 56 cm Built in 1993 Round stack feeder Counting device PCS 100 1st station: 4 fold pockets 56 cm Downstream knife shaft 2nd station: 4 fold pockets 56 cm Downstream knife shaft Noise Insulation Hoods Shed Display SAK 56 without compressors / air supply Delivery date: immediately from stock Price on request. We supply and install worldwide.

Chuck flange, flange mount, lathe chuck flange, drive flange -Feed flange for: drive heart, three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 185 mm -Short cones: 6 -Quantity: 1x disc available -Weight: 4 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 705 mm -Thickness: 25mm -Recess: 270 mm -Short cone diameter: 192/217 mm -Hole circle: Ø mm -Weight: 71 kg

Size: 520 mm Equipments: 4 buckle plates 1 Knife Flat pile feeder

Round stack feeder 4 pockets 2xSword 1xSide pocket Press delivery

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 748 mm -Rezess: 350 mm -Hole circle: Ø 600 mm -Weight: 100 kg

Machine vise, sturdy vise, drill vise -Vise: rotatable -Jaw width: 160 x 45 mm -Clamping depth: max. 250 mm -Dimensions: 470/290/H160 mm -Weight: 40 kg

Punch holder, die holder, punching tool, punch, punching die, punching punch -Matrix size: 13.7 mm -Matrix holder: for punching in the legs -Dimensions: 200/120/H90 mm -Weight: 8.7 kg

A used folding machine Steel KD 66 4 KTL Round stack feeder 4 bag 2xsword 1xSide pocket Press delivery

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -only one tool available (counter tool missing) -Shearing tool for channel steel: 30 mm, 60 mm -Type: 441216084902 -1x dimensions: 210/220/H30 mm -Weight: 9.9 kg

Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punch punch -Shearing tool for T-steel: 120 x 70 mm -Square: 25 mm -Round: 27mm -Type: 50305 -Dimension respectively: 175/140/15 mm -Weight: 5kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for U-steel: 80 mm -Type: 441215124701 -Type: 441215124702 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg

Impressions=0 m, Condition= Very Good , Availability= 2025-11-03, Flat Pile feeder 4 buckles 1 knife delivery

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 120 mm -Type: 441215124901 -Type: 441215124902 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 50 mm -1x dimensions: 140/140/H30 mm -1x dimensions: 135/135/H30 mm -Weight: 8 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 50 mm -Type: 440065124502 -Type: 440065124501 -1x dimensions: 136/130/H25 mm -1x dimensions: 128/132/H25 mm -Weight: 6 kg

Punch holder, die holder, punching tool, punch, punching die, punching punch -Die cut size: 9 x 25 mm -Groove between punch and scraper: 5 mm -Dimensions: 200/140/H170 mm -Weight: 12 kg

Clamping angle for workpiece clamping, measuring device -Dimensions: 400/350/H230 mm -Thickness: 35 mm -Groove: 15 mm -Surface: milled -Weight: 48 kg

Folding Machine Steel T 36 Year of manufacture: 1985 Flat Pile Feeder Folding Type: 4 buckles - 4 buckles Size: min. 80 x 100 mm - max. 360 x 650 mm Paper weight: 40 - 250 g/m² Pile height: max. 580 mm Speed: min. 10 m/min. - max. 160 m/min. Diameter of folding rollers: 32 mm Delivery: Stream delivery Compressor included immediately available from our warehouse in Germany

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Take shaft: SK60 -2x sleeve: MK1 -2x sleeve: MK2 -2x sleeve: MK3 -2x sleeve: MK4 -2x sleeve: MK5 -Weight: 48 kg

Bending tool, die, upper knife, upper tool, upper beam -Tool: for folding machine -Dimensions: 60 x 15 mm -Length: 1020 mm -Weight: 6 kg

Bending tool, die, lower knife, lower tool, lower jaw -Tool: for swivel bending machine -Widthen: for lower cheek -Dimensions: 59 x 19 mm -Length: 1452 mm -Weight: 10 kg

Bending tool, die, upper knife, upper tool, deer foot tool -Tool: for press brake -Tool radius: mm -Dimensions: 30 x 169 mm -Length: 2500 mm -Weight: 89 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake -Tool radius: mm -Dimensions: 14 x 94 mm -Length: 2500 mm -Weight: 20 kg

Bending tool, die, upper knife, upper tool, straight tool -Handover in the current condition as seen -partially damaged -Tool: for press brake -Dimensions: 35 x 154 mm -Length: 2653mm -Weight: 79.5kg

Bending tool, die, bottom knife, bottom tool, prism tool, beading tool -Tool: for press brake -Prism width: 16 mm -Tool: shared -Tool: is guided -Tool intermediate dimensions: 1430 mm -Transport dimensions: 1550/200/H235 mm -Weight: 250kg

Cleaning container, safety container, cleaning container -Material: sheet steel -Container: Ø 295 x 235 mm -Strainer basket: Ø 265 x 100 mm -Number: 3x devices available -Price: per piece -Dimensions: 310/370/H740 mm -Weight: 8 kg

Clamping plate, welding table, welding table, straightening plate -Width: 1000 mm -Length: 1295 mm -Height: 910 mm -Plate thickness: 28 mm -Wall thickness underframe: 5 mm -Transport dimensions: 1450/1000/H1100 mm -Weight: 570 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for drive heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 305 mm -Short taper: 8 -Number: 1x discs available -Price: per piece -Weight: 15.3 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for drive heart, three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 230 mm -Short taper: 102 mm -Number: 3x discs available -Price: per piece -Weight: 9.7 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for drive heart, three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 207 mm -Short taper: 6 -Number: 1x discs available -Price: per piece -Weight: 6.8 kg

Chuck flange, flange mount, lathe chuck flange, drive flange -Feed flange: for drive heart, three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 218 mm -Short cones: 6 -Bolt circle: Ø 155 mm -Bolt spacing: 110 mm -Quantity: 1x disc available -Weight: 9.2 kg

Clamping plate, welding table, welding table, straightening plate, workbench, work table -Diameter: 700 mm -Height: 810 mm adjustable -Sheet thickness: 19 mm -Number: 1 table available -Price: per piece -Weight: 88 kg/piece

Threaded rod, threaded bolt, threaded rods according to DIN 975 -Diameter: M24 -Threaded rod: galvanized -Quality: 4.8 -185 pieces, length: 2000 mm, price per piece: 15 EUR net -19 pieces, length: 3000 mm, price per piece: 20 EUR net

Torque wrench, torque tool -Recording: 1/2 inch -Torque: 4-13 mkp -Dimensions: 630/110/H40 mm -Weight: 1.2 kg

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 565 x 310 mm -Connection: Ø 500 mm -Material: sheet steel -Dimensions: 870/650/H650 mm -Weight: 38 kg

Manufacturer: Épgép STAHL Wingspan: 16.3 m Lifting height: 10 m Lifting capacity: 12.5 t Overall length: 16,300 mm Modernized, wired remote control, new 12.5 t carriage

plate width: 1500 mm plate depth: 4200 mm plate height: 350 mm total power requirement: kW weight of the machine ca.: 5 t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Flatpile With Tremathead, 1st Station: 4 Pockets, 2nd Station: 4 Pockets, 3rd Stations: 2 Pockets, Delivery

Pallet Feeder with Tremat Head, 1st Sation: 4 Pockets, 2nd Station: 4 Pockets, Mobile Knife, Delivery

Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Connection: 550 x 450 mm -Connection: Ø 515 mm -Material: Steel sheet -Number: 2x angles available -Price: per piece -Dimensions: 900/600/H610 mm -Weight: 22 kg

Serial No. FH. FANB-000076, Flatpile Feeder With Tremathead And DCT Control, 4 Pockets, Delivery, Equipped With Heidelberg Gluing Unit, Format: Max. 40x84cm, Min. 10x15cm

Serial No. FH. FAPF-001439, Flatpile Feeder, 4 Pockets, Delivery

Flatpile Feeder with Tremat Head, 4 Pockets, SAK 56 S2 Delivery

Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Connection: 550 x 450 mm -Connection: Ø 560 mm -Material: Steel sheet -Dimensions: 1600/660/H800 mm -Weight: 38 kg

Clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Material: Steel -Dimensions: 245/202/H130 mm -Wall thickness: mm -Weight: 28 kg

Height indicator, parallel indicator -Max. Working height: 300 mm -Hard metal needle -Dimensions: 175/60/H385 mm -Weight: 1.7 kg

Width 52 cm Built in 1990 Flat pile feeder TREMAT 1st station: 4 fold pockets 52 cm Gluing device HHS for cold glue Downstream knife shaft 2nd station: 4 fold pockets 52 cm Downstream knife shaft flexible sword folding unit EF 43 Shed display SAK Delivery date: immediately Price on request. Worldwide delivery & installation.

T-slot plate, clamping plate with T-slots, plate field, welding table, welding table, intermediate plate for hydraulic press, eccentric press, milling machine -Dimensions: 930/700/H90 mm -Plate: massive -Bore in the middle: Ø 100 mm -Weight: 450 kg