demag p used for sale

Control type: NC 4 Number of hours: 38,000 hours Closing force: 420 T Opening stroke: 710 mm Between columns: 800 x 710 mm Tray dimensions: 1200 x 1100 mm Mini/maxi mold: 380/820 mm Max distance between trays: 1530 mm Injection: Screw diameter: 60 mm Screw length: 20D cm3: 763 Bars: 1905 General: Motor power: 45 kW Heating power: 23.1 kW Closing weight: 18t Injection weight: Length dimensions: 8 m Width dimensions: 2.20m Height dimensions: 2.50 m Options: Cores: 2 Robot interface: YES Bi metal: YES

Type of control: NC4 Closing force: 50 T Opening stroke: 260 mm Between columns: 330 x 330 mm Tray dimensions: 490 x 500 mm Mini/maxi mould: 150/350 mm Max gap between trays: 610 mm Injection: Screw diameter: 30 mm Screw length: 20D cm3: 74 Bars: 1400 General: Motor power: 20 kW Heating power: 5 kw Closing weight: Injection weight: 3.3 tons Dimensions length: 4.00 m Dimensions width: 1.20 m Dimensions height: 1.80 m Options: Cores: NO Bi metal: YES

Closing force: 420 T Opening stroke: 770 mm Between columns: 820 x 820 mm Tray dimensions: 1200 x 1200 mm Mini/maxi mould: 380/825 mm Max gap between trays: 1595 mm Screw diameter: 60 mm Screw length: 25D Injection volume: 763 cm3 Injection pressure: 2106 bar Motor power: 135 kW Heating power: 27.9 kw Injection weight: 24 tons Dimensions length: 8m Dimensions width: 2.2 m Dimensions height: 2.70 m robot interface Bi-metal 2 blowguns, 3 batteries on injection, 16 hot channels

Closing force: 420 T Opening stroke: 770 mm Between columns: 820 x 820 mm Tray dimensions: 1200 x 1200 mm Mini/maxi mould: 380/825 mm Max gap between trays: 1595 mm Injection: Screw diameter: 60 mm Screw length: 25D cm3: 763 Bars: 2106 General: Motor power: 135 kW Heating power: 27.9 kw Options: Cores: Robot interface: YES Bi metal: YES Others: 2 BLOW GUNS, 3 injection batteries, 16 hot runners

Year 2013 Type of control: NC5 Number of hours: 47,812 Storage location: MECA PLASTIC Deadline: AVAILABLE Closing Closing force: 420 T Opening stroke: 770 mm Between columns: 820 x 820 mm Tray dimensions: 1200 x 1200 mm Mini/maxi mould: 380/825 mm Max gap between trays: 1595 mm Injection: Screw diameter: 60 mm Screw length: 25D cm3: 763 Bars: 2106 General: Motor power: 135 kW Heating power: 27.9 kw Closing weight: Injection weight: 24 tons Dimensions length: 8m Dimensions width: 2.2 m Dimensions height: 2.70 m Options: Cores: Robot interface: YES Bi metal: YES Others: 2 BLOW GUNS, 3 injection batteries, 16 hot runners

Control type: NC4 Closing force: 50 T Between columns: 330 x 330 mm Tray dimensions: 490 x 500 mm Mini / maxi mold: 150/350 mm Max distance between plates: 410 mm Screw diameter: 30 mm cm3: 74 Bars: 1400 Motor power: 20 kw Heating power: 5 kw Cores: NO Bi metal

INJECTION UNIT Screw diameter: 60 mm Calculated injection volume: 763 cm³ Length / diameter ratio: L / D Pressure on the material: 1905 bars CLOSING UNIT Closing force: 2500 kN Mold thickness Mini / Max: 370-710 mm Passage between columns: 630 x 630 mm EQUIPMENT 4 Cores EUROMAP robot socket

INJECTION UNIT Screw diameter: 45mm Calculated injection volume: 323 cm³ Length / diameter ratio: 20 L / D Material pressure: 1973 bar CLOSING UNIT Closing force: 1500 kN Mini / Max mold thickness: 250/560 mm Maximum distance between trays: 1060 mm Passage between columns: 500 x 500 mm Tray size: 790 x 790 mm GENERAL Oil quantity: 500 l. Dimension: (WxHxD) 5.2 x 2.1 x 1.5m. Weight: Kg 6700 EQUIPMENT CL4 command 1 core 1 blow gun

Control type: NC4 Closing force: 300 T Opening stroke: 670 mm Between columns: 710 x 830 mm Mini / maxi mold: 330mm Max distance between plates: 1380/1500 mm Screw diameter: 60 mm cm3: 763 Bars: 1970 Others: 2 BLOWERS, 2 batteries on the injection

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 168 cm³ Length / diameter ratio: 20 L / D Pressure on the material: 2020 bars CLOSING UNIT Closing force: 800 kN Opening stroke: 450 mm Mold thickness Mini / Max: 250 mm Max distance between tray: 700 mm Passage between columns: 400 x 400 mm Tray size: 580 x 590 mm GENERAL Heat output: 22 kW Total installed power: 30 kW Quantity of oil: 250 l. NC4 control Machine used exclusively in a clean room

Year of manufacture: 2004 Type of control: NC4 Number of hours: 27,000 H Closing force: 200T Opening stroke: 575 mm Distance between columns: 560 x 560 mm Tray dimensions: 830 X 830 mm Mini/maxi mould: 310/660 mm Max gap between trays: 1235 mm Screw diameter: 50/25 mm Screw length: 20 D Injection volume: 442/61 cm3 Injection pressure: 1946/1940 bar Motor power: 30KW Heating power: 14.8 KW Closing weight: 10T Dimensions length: 5.70 m Dimensions width: 1.70 m Dimensions height: 2.10 m 1 hydraulic core robot interface Bi-metal Turntable

INJECTION UNIT Screw diameter: 60 mm Calculated injection volume: 763 cm³ Length / diameter ratio: 20 L / D Pressure on the material: 1905 bars PS plasticization capacity: 690 Kg / h CLOSING UNIT Closing force: 3300 kN Mold thickness Mini / Max: 330/710 mm Max distance between tray: 1385 mm Passage between columns: 710 x 630 mm Tray size: 1040 x 950 mm GENERAL Heat output: 55 kW Total installed power: 78 kW Quantity of oil: 700 l. EQUIPMENT - NC4 control - Electric motor on metering - Integrated hot ducts - EUROMAP - 3 Hydraulic cores - 3 Sequential cores - 1 Air core

Type of control: NC 4 Number of hours: 34,000 H Closing force: 80 T Opening stroke: 450 mm Between columns: 420 x 420 mm Tray dimensions: 600 X 600 mm Mini/maxi mould: 250/mm Max gap between trays: 700 mm Injection: Screw diameter: 35mm Screw length: 20 D cm3: 168 Bars: 2020 General: Motor power: 15 kW Heating power: 9 kw Cores: 1 Robot interface: yes Bi metal: yes

Control type: NC 5 Number of hours: 27,000 hours Closing Closing force: 350 T Opening stroke: 700 mm Between columns: 760 x 710 mm Tray dimensions: 1070 X 1015 mm Mini/maxi mold: 400/670mm Max distance between trays: 1370 mm Injection: Screw diameter: 60 mm Screw length: 20 D cm3: 2366 Bars: 890 General: Motor power: 55 kW Heating power: 23.1 kW Closing weight: 18 T Injection weight: Dimensions length: 6.5 m Width dimensions: 1.8 m Dimensions height: 2.3m Options: Cores: hydraulic predisposition 2 cores Robot interface: E67 Bi metal: YES Others: 4 blow guns, 2 Kisler mold pressure ports, laminar flow, 8 hot runners

Control type: NC 4 Number of hours: 32,500 hours Closing force: 80 T Opening stroke: 450 mm Between columns: 420 x 420 mm Tray dimensions: 600 X 600 mm Mini/maxi mold: 250/mm Max distance between trays: 700 mm Injection: Screw diameter: 35mm Screw length: 20 D cm3: 168 Bars: 2020 General: Motor power: 15 kW Heating power: 9 kW Closing weight: 4 T Injection weight: Dimensions length: 4.2 m Width dimensions: 1.4m Height dimensions: 4.8 m Options: Cores: 1 Robot interface: yes Bi metal: yes

All movements are fully frequency controlled with lifting magnet of 16 ton capacity with digital scales Kind of: overhead travelling crane Capacity: 20 ton Span: 18 800 mm Tackle speed: 0 > 8 m/min Rotationspeed: 0 > 60 m/min Displacementspeed: 0 > 40 m/min Weight: 24 ton Numbre of riggers : double rigger

Closing unit Clamping force [kN] 3300 Dimensions of mounting plates (hxv) [mm] 1040 x 950 Clearance between columns (hxv) [mm] 710 x 630 Min./max. mold height [mm] 330/710 Maximum opening width [mm] 1385 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 1039 Injection weight [g] 940 Injection pressure [bar] 1400 Electrical and hydraulic equipment Rated power of the pump motor [kW] 63.3 Heater power [kW] 27 Dimensions and weight Net weight with control cabinet [t] 15.5 Dimensions (length x width x height) [m] 6.5 x 3.8 x 2.3 Side unit: screw diameter 35mm injection weight approximately 150g

Injection weight: 150 g Closing force of 1000 kN Screw diameter: 35 mm Injection pressure: 1865 bar Column spacing: 420 x 420 mm Plate size: 600 x 600 mm Min. mold height: 200 mm Control type: ERGOcontrol Language German Installed power: 46.7 kw Operating hours: 67455 h Weight: 6500 kg Dimensions: 4.6 x 1.5 m Core pull Yes Robot socket Yes Air valve Yes Heating control for molds Yes Elbow closing unit Yes

Screw diameter [mm] 22 Injection volume [cm3] 22.8 Injection weight [g] 20 Injection pressure [bar] 2400 Electric-hydraulic equipment Nominal power of the pump motor [kW] 7.5 Heater power [kW] 3.7 Dimensions and weight Net weight with control cabinet [t] 2.6 Dimensions (L x W x H) [m] 3.20x1.30x1.80 m

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 830 x 830 Clearance between columns (hxv) [mm] 560 x 560 Min./max. mold height [mm] min 310 Maximum opening width [mm] 1335 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 451 Injection weight [g] 410 Injection pressure [bar] 1946 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 15 Dimensions and weight Net weight with control cabinet [t] 9 Dimensions (length x width x height) [m] 5.7 x 1.7 x 2.1

Clamping force [kN] 1600 Dimensions of mounting plates (hxv) [mm] 770 x 770 Clearance between columns (hxv) [mm] 520 x 520 min./ max. mold height [mm] min275 max 685 Maximum opening width [mm] 500 injection unit Screw diameter [mm] 40 Injection weight [g] 260 Injection pressure [bar] 1600 Electric-hydraulic equipment Nominal power of the pump motor [kW] 22 Heater power [kW] 11.3 Dimensions and weight Net weight with control cabinet [t] 6.5 Dimensions (L x W x H) [m] 5.3 m x 1.5 m x 2 m

Clamping force [kN] 350 Dimensions of mounting plates (hxv) [mm] 410 X 410 Clearance between columns (hxv) [mm] 280 x 280 injection unit Screw diameter [mm] 25 Injection volume [cm3] 48 Injection weight [g] 43 Injection pressure [bar] 2441 Electric-hydraulic equipment Nominal power of the pump motor [kW] 11 Heater power [kW] 5 Dimensions and weight Net weight with control cabinet [t] 1.8 Dimensions (L x W x H) [m] 3.20x1.30x1.80 m

Closing unit Clamping force [kN] 4200 Dimensions of mounting plates (hxv) [mm] 1200 x 1100 Clearance between columns (hxv) [mm] 870 x 710 Min./max. mold height [mm] 380/820 Maximum opening width [mm] 1530 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 763 Injection weight [g] 690 Injection pressure [bar] 1905 Electrical and hydraulic equipment Rated power of the pump motor [kW] 45 Heater power [kW] 23 Dimensions and weight Net weight with control cabinet [t] 20 Dimensions (length x width x height) [m] 7.9 x 2.2 x 2.5

All movements are fully frequency controlled with lifting magnet of 16 ton capacity with digital scales Type: ZZKE Group FEM 4M Hoist DH 2050 H27 ZV3 4/1 Kind of: overhead travelling crane Capacity: 20 ton Span: 18 800 mm Tackle speed: 0 > 8 m/min Rotationspeed: 0 > 60 m/min Displacementspeed: 0 > 40 m/min Weight: 24 ton Numbre of riggers : double rigger

Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column

Screw diameter; 95 mm Injectable volume: 3360cm3 Injection pressure: 1895 bar Column width: 1000 x 900 mm Minimum mould thickness: 40 mm max: 950 mm Aperture stroke: 930 mm Cores: 4 Robot Interface: Yes Options: Retractable Column - Electric Dosing Motor 24 Zones Mold Heater Magnetic trays 8-point sequential injection Blow guns: 2 3-axis robot

with remote control with digital scales Kind of: overhead travelling crane Capacity: 2,5 ton + 2,5 ton Span: 18 520 mm

Key data: 100000 kN, 149 g/PS, 35 mm

Clamping force: 100 t Year of construction: 2001 Injection weight in PS: 149 g Control Type: NC4 Injection unit: .../310 Screw diameter: 35 mm Spec. Injection pressure: 2020 bar Spray volume: 168.3 cc Injection weight in PS: 149 g Hydr. Drive power: 18.5 kW Cylinder heating capacity: 9.4 kW L/D screw ratio: 20 Clamping unit: 100/... Clamping force:: 100 t Size of clamping plates: 600 x 600 mm Lights spar spacing: 420 x 420 mm Ejector force: 41.2 kN Tool installation height: 250 mm Aperture travel: 500 mm Max. plate spacing: 750 mm Ejector travel: 150 mm General information: Fuel tank capacity OIL: 220 l Weight: 4800 kg Dimensions(m) LxWxH: 4.3 x 1.4 x 2.0 m Equipment: 1 x Hydraulic Core 1 x Pneumatic Valve

Clamping force: 35 t Year of construction: 2006 Injection weight in PS: 30 g Control Type: NC4 Injection unit: .../80 Screw diameter: 22 mm Spec. Injection pressure: 2061 bar Spray volume: 34.2 cc Injection weight in PS: 30 g Hydr. Drive power: 7.5 kW Cylinder heating capacity: 5.1 kW Clamping unit: 350/... Clamping force:: 35 t Size of clamping plates: 460 x 450 mm Lights spar spacing: 280 x 280 mm Aperture travel: 350 mm Max. plate spacing: 530 mm Ejector travel: 100 mm General information: Delivery Time: Natychmiast Weight: 2750 kg Dimensions(m) LxWxH: 3.2 x 1.2 x 2.0 m Equipment Filling funnel Sorting flap bimetallic plasticizing structure hydraulic core on movable plate

Key data: 250000 kN, 690 g/PS, 60 mm

Clamping force: 250 t Year of construction: 2008 Injection weight in HP: 690 (hp) g Control Type: NC4 Injection unit: .../1450 Screw diameter: 60 mm Spec. Spray pressure: 1905 bar Spray volume: 763 ccm Injection weight in HP: 690 (hp) g Clamping unit: 250/... Clamping force:: 250 t Size of clamping plates: 950 x 950 mm Lights spar spacing: 630 x 630 mm Tool installation height: 330...710 mm Aperture travel: 450 mm Max. plate spacing: 1160 mm General information: Delivery Time: Dostępna Fuel tank capacity OIL: 700 l

clamping width: 5000 mm lifting capacity: 5 t weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping width: 22000 mm lifting capacity: 10 t weight of the machine ca.: 17 t only for export: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: With ABUS electric chain hoist, maximum load 250 kg maximum capacity: 125 kg, throat: 5,000 mm, Approx. Onsite Dimension. (l x w x h): 5,700 x 700 x 3,600 mm, weight approx.: 500 kg

Injection unit Screw diameter: 35 mm Calculated injection volume: 154 cm3 Length/diameter ratio: 20 L/D Max. injection rate: cm3/s Material pressure: 2790 bar Closing unit Closing force : 1300 kN Distance between tie-bars: 520 x 520 mm Platen dimensions: 725 x 725 mm General Total installed power: 9.4 kW Other Equipment : Process INTELECT 2 FULL ELECTRIC 2 Hydraulic cores 1 AIR core EUROMAP 67 Commissioning: 2019 Hours: 3300 h Tonnage: 130

Hoist: DH 312 H12 Equipped with vaccuum pump + tank Kind of: overhead travelling crane Capacity: 5 ton Span: 16 350 mm Tackle speed: 1,3 & 8 m/min Numbre of riggers : single rigger

pillar-mounted slewing crane:: mobil arm length: ca. 2500 mm weight of the machine ca.: 4 t weight max. in kg: 125 kg bucket net weight: 430 kg bucket filling weight: mindestens 416 kg bucket - total weight: mindestens 846 kg max. wheel load: 391 kg max. support load: 544 kg : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suspension crane: 2 Stück: : 1. Kran : dimensions: 2500 x 3800 mm : 125 kg : 2. Kran: dimensions: 2500 x 4800 mm : 125 kg for expample for assembly work: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: 1992 Operating hours: 1240 (as of 18.04.24) Ab. Total weight: 2000 kg

Clamping force: 50 t Tool height: 210 mm Opening distance: 400 mm Platten dimensions: 520 x 520 mm Clearance between tie bars: 355 x 355 mm Screw diameter: 30 mm Specific injection pressure: 1990 bar Injection volume: 106 cm3 Shot weight: 94 g Dimensions(m) LxWxH: 3.7m x 1.4m x 1.8m Weight: 2900 kg Condition: working

volume capacity: 5,63 m³/min suction: 1 bar pressure: 8 bar turning speeds: 3000 U/min engine output: 37 kW dimensions of machine L x W x H: 1,35 x 1,05 x 1,43 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

crane remote control, radio receiver, receiver, crane radio remote control, radio control system, crane control, radio remote control, radio remote control -Manufacturer: NBB, radio remote control with charger -Type: SL 48-2/MOV HF:SM 430 -Charger: LAD 0470 -Total dimensions: 230/210/H170 mm -Weight: 3.2 kg

Sell a used demagnetization device Dimensions 22506001280mm with conveyor belt. Bandwidth 300mm Passage 400mm diameter, height conveyor belt top edge / height passage 280mm Tiede type ET400 8Kw 16A / 400V connection

Glaze line, Type Jelly Power Pack JLC, Fabr. Boyens,

Downpour record Grey iron GGG50 1500 x 1500 chamber filter records Downpour records for chamber filter pressing 1500x1500 we can offer to you for almost all arrangements chamber filter records also in PP, filter cloths and spare parts almost all manufacturer.

Drum pump, hygienic ExzenterschneckenpumpeVon of the company GrünpumpenTechnische DatenTyp ds.: LDS 80.1Ser. No.: 0259 Qm³ / h 2,40N1 / min: möglichVerpackung 6,75ZahlungsmodalitätenBarzahlung pick up and transfer in advance and shipping pick up, shipping via forwarding and abroad by prior arrangement all data were listed to the best of our knowledge and belief.Errors are reserved. This auction is aimed only at professionals, dealers, and other legal persons.

; ready for operation

Flygt pumps model 3085 Top quality! Steel case, stainless steel shaft 2 kW 1395U RPM Flow rate corresponds to ca 30 l / s 1800 l / min Total length ca. 80 cm, 60 kg Very good condition! â?¬499 This is not a DIY part, these pumps are offered usually for twice. Preferred site 76829 Landau, pick up, delivery possible

Offer via gebr. Pipe separation and chamfering machine Fabr. GF Type AVM RA6 Technical data: Outer pipe diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed Speed levels electronically 1 - 6 Power 1600W used, in good condition.