134,051 used machines on RESALE, but how to find them? Machine Search
Continuous/normal drilling power (mm) R1 (gemes. Drehmom. Nm) 30/35 (in E3335/ST60) (135) R2 (gemes. Drehmom. Nm) 27/32 (in E335/ST60) (90) Thread cutting performance max. (slope-dependent) R1 M30x3.5 R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Extension (mm) 300 Column diameter (mm) 140 Usable table area (W x D) (mm) 590 x 450 Speed display digital Drilling depth display digital Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,200 mm Motor rotary current 400V with frequency inverter (kW) 4.0 Spindle speeds infinitely variable R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Feed by hand Weight (kg) 400 Optional (780 EUR) drilling package 5,beststretched from: Vice [felix] 125 Cone mandrel MK III/B ...
used
Magnetic chip conveyor of a PFAUTER PA320 can be used universally. Length 135cm
used
Bread slicer Wabäma Type Piccolo 380.10 HA MB Cutting width 10mm semi-automatic 230 Volt 0.75 kW
Standard cylinder with locking unit, DNC-125-500-PPV-A-KP, 163494, Festo, used Top Special price For your info - The current new discounted price of a similar product is € 1955 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company's spare parts warehouse, was only used for a very short time and is in very good condition. Standard cylinder with locking unit, DNC-125-500-PPV-A-KP, 163494, Festo, used-Top, consists of: - Standard cylinder DNC-125-PPV-A (current discounted new price € 419 excl. VAT) - Locking unit KPE-32 (current discounted new price € 1536 excl. VAT) - and a longer piston rod Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, wh ...
Linear drive, stroke 420mm, DGPL-80-420-PPV-A-KF-B, 161797, Festo, used tested Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used and tested! The part was purchased from a spare parts warehouse of a company, was tested by us and checked for leaks. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions appl ...
Used quail Piccolo, 5 floors with fermentation chamber. All floors with separate controls. Fermentation cabinet has 4 editions. 5 floors for 60x80 cm sheets all floors with separate controls Stainless steel clad with hood Fermentation chamber 4 editions for 60x80 cm sheets Dimensions: Height: 240 cm Width: 100 cm Depth: 140 cm Technical data: Year. 03/99 400V - 50 Hz AC/3PH/N/PE
Deck Oven Wachtel Piccolo II-3 with Proofer -DMS 3 Master EM - 3 floors - 120cm wide and 80cm deep on each floor - With fixed water connection - each floor is equipped with a separate steam box - Each floor with separate controls - Top and bottom heat can be controlled separately - with proofer - Oven can be moved on castors - Control DMS 3 Master Timer - electr. Connected load 26.9 kW - Each floor with separate 16A CEE plug - 1 floor entrance height is 20cm - 2 floors floor entrance height is 16.5cm - Year of construction 05 / 2013 - External dimensions approx. wide: 156cm Depth: 134cm and 202cm high (height can be adjusted on the roller holder)
Flaschenreinigungsmaschine, Hersteller Swiss PAC, Baujahr: 1992, Leistung 3.500 - 6.000 Flaschen / Stunde. Bottle washer washing machine, Made Swiss PAC, Year: 1992, Capacity 3.500 - 6.000 bph, in stainless steel
Used autoclave PANZER 340 liters with superheated steam -refurbished- - Control, cover seal, safety valve, pressure gauge, etc. all new. - For sterilizing, preserving, pasteurizing, cooking, curing, and aging. - Autoclave compl. made of high-quality stainless steels, lid with quick-release fastener. - The autoclave is equipped with all safety equipment. - The autoclave was manufactured in accordance with the latest requirements of the current pressure vessel regulation. - All safety equipment, such as safety valve, pressure gauge, overheating protection, steam drain valve, safety outlet valve, etc. are of course installed. - The autoclave is subjected to a construction and pressure test by the TÜV. Corresponding certificates are included in the scope of delivery. - Fully automatic control by F-value controller including operating temperature, core temperature, F-value contr ...
1 mixing arm with bottom discharge screw all stainless steel right-left turn 1 speed dimensions (l x w x h) : ± 2.500 x 1.050 x 1.700 mm with new control box + control (Siemens logo) all new cables
1 PIMATEX type MTFC020 high temperature yarn dyeing machine vertical type, capacity 20 Kg, year 2004 carrier with 6 swords and each sword carries 4 cones gauge 6" = 24 cones each batch 1 PIMATEX type MTFC030 high temperature yarn dyeing machine vertical type, capacity 30 Kg, year 2001 carrier with 9 swords and each sword carries 4 cones gauge 6" = 36 cones each batch 1 PIMATEX type MTFC050 high temperature yarn dyeing machine vertical type, capacity 50 Kg, year 2001 carrier with 16 swords and each sword carries 4 cones gauge 6" = 64 cones each batch 1 PIMATEX type MTFC100 high temperature yarn dyeing machine vertical type, capacity 100 Kg, year 2001 carrier with 24 swords and each sword carries 6 cones gauge 6" = 144 cones each batch 1 PIMATEX type MTFC160 high temperature yarn dyeing machine vertical type, capacity 160 Kg, year 2001 carrier with 36 swords and each ...
Sheet filter, Plate Filter Seitz Orion 60 x 60 for Beer, Wine, Juice With 23 stainless steel plates 60 x 60 cm With 56 x PVC filter plates 60 x 60 cm With 4 x Endplates 60 x 60 cm / steel Fittings complete Measurements and Weight: Height: 1680 mm Width: 3500 mm Length: 820 mm Weight: 1350 kg 60 x 60 Per plate = 140 Ltr in the case of sterile filtration – 2940 Ltr =350 Ltr. in the during clarification – 7350 Ltr. 3 Filter layers per m²
SCHENCK hydraulic power unit type PP165 B Used hydraulic power unit Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 165 l/min Fuel tank capacity 0.95 m³ Year of manufacture 1987 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding a ...
Sheet filter, Plate Filter Seitz Orion Type 60A100 for Beer, Wine, Juice Manufacturer: SEITZ Orion Type: 60A100 No.72044 Year of production: 1975 With 98 x PVC filter plates 60 x 60 cm With 4 x Endplates 60 x 60 cm / steel Fittings complete Measurements and Weight: Height: 1690 mm Length: 4200 mm Width: 1300 mm Weight: 1650 kg 60 x 60 Per plate = 140 Ltr in the case of sterile filtration – 2940 Ltr =350 Ltr. in the during clarification – 7350 Ltr. 3 Filter layers per m²
SCHENCK hydraulic power unit type PP165 B Used hydraulic power unit Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 165 l/min Tank capacity 1 m³ Year of manufacture 1991 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding agent, we ...
Sheet filter, Plate Filter Seitz Orion Type 60A150 for Beer, Wine, Juice Manufacturer: SEITZ Orion Type: 60A150 No.72466 Year of production: 1979 With 85 x PVC filter plates 60 x 60 cm With 2 x Endplates 60 x 60 cm / steel Fittings complete Measurements and Weight: Height: 1180 mm Length: 4100 mm Width: 950 mm Weight: 1650 kg 60 x 60 Per plate = 140 Ltr in the case of sterile filtration – 2940 Ltr =350 Ltr. in the during clarification – 7350 Ltr. 3 Filter layers per m²
Capacity: up to 22kg of green coffee per roast (88kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase, 60Hz (other voltages by request) Gas: natural gas/LPG Burner: Probat – direct, modulated Chaff cyclone with a wheeled bin for easy chaff disposal is included with the roaster. A green coffee loader and destoner can also be included. The roaster will undergo a major refurbishing, the process will include: - inspection, sandblasting, cleaning and repairing all of the parts, - installing new insulation, - installing new bearings, - installing a new drum cover, - installing new direct drive motors with speed control on the drum and exhaust fan, - making a new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profiling), - installing new cooling bin sheathing, - rebuilding the burner, - building a new c ...
Sirona Small X-ray / Intraoral Machine Heliodent Plus with Tube D 3507 0.4 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. It is packed on pallets, professionally lashed and wrapped in stretch film and can be picked up immediately • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Philips mobile C-arm BV Endura with Tube F 017 0.6/1.4 Image intensifier 23 cm Monitor trolley with double monitor (flat screen) • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. It is packed on pallets, professionally lashed and wrapped in stretch film and can be picked up immediately • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Key data: 150 mm
Berstorff Strainer Extrusion Line Consisting of: Extruder Supplier Berstorff Type GE 150KSx16D Year of construction 2007 Pins: 12 Pins per level: 8 Condition: good Weight approx. 10000 kg Screen change: hydraulic, bladder accumulator 20lt / 300Bar D = 200mm Gear pump Supplier: Maag Pump Systems Type: extrex® 110-5 RV Volume 716 cm³ / rev Year of construction 2013 Condition: good Heaters Supplier: Regloplas Type P140 Year of construction various Number 5 pcs. Cooling bath Cooling medium Water above, 2 rows below with 4 fans each Year of construction 2006 Condition: good Dimensions 9m Weight approx. 500 kg Especially 8 fans Installation tape Year of construction 2006 Condition: good Weight about 300 kg
High-precision parallel documents, sanded in pairs, dimension + parallelism in height and width +/- 0.005mm. Dirkt from the manufacturer, made in Austria.
Sheet filter, Plate Filter Type FP 430 on rolls for beer, wine, juice etc. Manufacturer: KTM-Troxler Type: FP 430 30 plastic filter plates DN 25 outlet at bottom with butterfly valve Filter plate size: 40 cm x 40 cm – with fittings complete
Busbars for any shipbuilder or re-fit project. Produced following the highest European standards and availability rate FOR QUOTATION: INFO@AMP-POWER.NL Maximum Voltage 300 V AC/ 48V DC Number of terminal studs : 4 / 8 Terminal Type : 16 Stud Terminal stud torque : 15.82 Nm Continuos Rating : 545A AC / 600A DC Base Material: Reinforced Polycarbonate Bus Material : Tin-Plated Copper CDA 11 /UNS11000 Weight : 0.79 kg / 1.25 kg
IMA FILLING AND CLOSING MACHINE, MODEL STERIFILL SMART PWD Year of construction: 2017 IMA SMART PWD is able not only to process difficult powders accurately, but also to simultaneously dose, by vacuum-pressure, two different types of pharmaceutical products inside the same vial, with single 100% check-weighing. Speed: max. 100 pcs/min Available formats: 10R Transport system: Intermittent motion Highlights Possibility of dosing up to 2 different pharmaceutical powders in the same vial Vacuum-pressure powder filling system Advanced 100% IPC with speeds of up to 120 pcs/min Possible integration of a capping station Pick & place stoppering system Fit for isolation technology with possibility of wetting in place cRABS for powder containment Technical characteristics Standard voltage: 400 V, 50 Hz, 3ph + N + G Installed power: 19 kW
Various pressure expansion vessels with solid steel gas filling, built in 2008, unused 2x Pneumatex Statico SU 500.6 Pressure expansion vessels (steel), year of construction: 2008, cylindrical, 500L, 6 bar, diameter: approx. 680 mm, total height with feet: approx. 1588 mm, permissible temperature range: -10°C-120°C 4x Pneumatex Statico SG 1000.6 Pressure expansion vessels (steel), year of construction: 2008, cylindrical, 1000L, 6 bar, diameter: approx. 850 mm, total height with feet: approx. 2189 mm, permissible temperature range: -10°C-120°C (unused) 3x Pneumatex Statico CG 3000.6 E Pressure expansion vessels (steel), year of construction: 2008, cylindrical, 3000L, 6 bar, diameter: 1,300 mm, total height with feet: approx. 2936 mm, permissible temperature range -10°C â 120°C (unused)
1 x 'Forward Machinery Industrial Corp'. (Taiwan) 4 roll inverted L calender line, Year of manufacture: 2007, Roll dimensions: 34in (860mm) dia x 157in (4000mm) wide, Peripherally drilled (oil heating), Roller bearings, Motorised nip gap adjustment, Roll bending rolls 2 and 4, Cross axis roll 3, Independent drive to each roll:- Roll 1: 110kW, Roll 2: 150kW, Roll 3: 150kW, Roll 4: 110kW. Finished product width 3600mm. Pick off rollers, Matt finish embossing station, Edge trimming, 19 x cooling drums 355mm dia x 4000mm wide, Dual station surface winder. The line is already dismantled and ready for immediate shipment. There is also upstream equipment available by separate negotiation (high speed mixers, 2 x 100L Banbury, strainer, two roll mills etc).
ALEXANDERWERK ROLLER COMPACTOR, MODEL BT 120 PHARMA Year of construction: 2016 With a benchtop design providing a throughput of up to 8 kg/h (based on lactose). Specially designed for use in research and development areas. Can be used for granulation of biological compounds and active ingredients. TECHNICAL DATA Roller size Roller diameter: 120 mm Roller width: 25 mm Production details Maximal pressure force: 20 kN/cm Maximal roller gap: 4 mm Maximal roller speed: 15 rpm Throughput, continuous operation: up to 8 kg/h (lactose) Size Dimensions (H x W x D): approx. 621 mm x 897 mm x 977 mm Weight (incl. control system): approx. 425 kg The modular design guarantees fast changing and cleaning of all working tools and meets the requirements for flexible working Due to of its modular design, the process technology of the machine can be completely disa ...
JENBACHER TYPE 4 Heat Exchangers Charge Air Coolers Intercoolers J414 / J416 / J420 PNo:1202340
GUSCOR HGM560 / SFGLD560 Heat Exchangers Charge Air Coolers Intercoolers Part Number 7673532
MWM TCG 2020 V12/V16/V20 Heat Exchangers Charge Air Coolers Intercoolers Part Number 12452511
used
Poly-Clip SCH 6210 Width x Depth x Height: 200 x 360 x 900 mm Weight: 10 kg Suitable clip sizes: SCH 6210: S 625/628/632/638 The SCH 6210 single-clip machine is manually operated. Operation is hassle-free and does not require much effort. A hand lever closes the rake flap and sets the clip. The excess intestinal or bag braid can be removed with the integrated cutting blade. The single-clip machine is ideal for sealing cut goods, for dividing portions and for bag sealing. All plastic, fibre, collagen and natural casings from small calibers up to 120 mm are processed. Advantages: - Manually operated - independent of energy sources - Easy to transport - low weight - Repeatable clip pressure adjustment depending on casing type - Integrated cutting blade - Machine made entirely of stainless material - Easy to clean Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 ...
Machine grinds in linear pass, Extremely robust design. Specifications: Workspace: Largest sanding width 150 mm Highest working height for new grinding tool (workpiece passage) 50 mm Diameter of the grinding wheels 600 mm Speed upper grinding wheel 765 rpm Lower grinding wheel 765 rpm Circumferential speed: upper grinding wheel 24 m/s Lower grinding wheel 24 m/s Dimensions of the abrasive tools: Ø 600 x 75 x Ø 50 mm Workpiece feed speed infinitely adjustable from 35 to 350 mm/s Grinding wheel infeed: Total travel per grinding wheel 150 mm Grinding wheel feed servo motor controlled Dressing Unit: Servo Motor Controlled Grinding motors: 30KW Ges. Power requirement approx. 62KW Dimensions of the machine: Length approx. 2750 mm Width approx. 2050 mm Height: approx. 3000 mm Footprint: Length: approx. 4350 mm Width: approx. 5020 mm Weight: 6500 kg The m ...
Pizza oven with one floor, hood, and fermentation chamber GMG The baking chamber is completely made of refractory stone Temperature range: 50 to 400°C The front side made from stainless steel Digital control Upper and lower heat are separately adjustable Digital monitoring for upper and lower heat settings Digital error code system Heavy-duty temperature-resistant door with tension spring Double-glazing door glass for strengthened insulation and air circulation External dimensions: 149x110x156cm Internal dimensions: 105x70x15cm Electric power: 1 x 8 kW - 3NAC I 400 V Fermentation chamber: 149 x 93 x 90 cm - 3kW and 230 V Weight: 320 kg
JENBACHER TYPE 4 J414 / J416 / J420 PNo: 1202340
GUSCOR HGM560 / SFGLD560 Part Number 7673532
Pizza oven with two floors, hood, and fermentation chamber GMG The baking chamber is completely made of refractory stone Temperature range: 50 to 400°C The front side made from stainless steel Digital control Upper and lower heat are separately adjustable Digital monitoring for upper and lower heat settings Digital error code system Heavy-duty temperature-resistant door with tension spring Double-glazing door glass for strengthened insulation and air circulation External dimensions: 149x110x194cm Internal dimensions: 105x70x15cm Electric power: 2 x 8 kW - 3NAC I 400 V Fermentation chamber: 149 x 93 x 90 cm - 3kW and 230 V Weight: 500 kg
: : : total power requirement: 0.75 kW weight of the machine ca.: 0.22 t required space: 0.6x0.8x1.45 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
PART NUMBER: 7481 Specifications: - Track width 350mm - shaft width 350mm - max blade diameter 400mm - blade bore diameter 80mm - max cutting height 120mm - table top dimensions 2050x1230mm in advance: -Triggers - pulling shaft, toothed -Triggers - shaft with saws - slip shaft, pressure shaft From below: - rollers in front of the tabletop, 2 pcs -Guide -Triggers -caterpillar - central lubrication of the track -laser - electric shaft lifting with saws - Electric body lifting - Infinitely variable feed speed - extraction spigot diameter 140mm - main motor 45kW - total dimensions length/width/height 2600x2350x1850mm - weight about 4000kg Advantages: – Czech production - with laser – used multi-rip saw – very good condition Net price: 36900 PLN Net price: 8386 EUR depending on the price of 4.40 EUR (Prices may change with higher flu ...
PART NUMBER: 7480 Specifications: - Track width 360mm - shaft width 350mm - max disc diameter 350mm - blade bore diameter 80mm - max cutting height 120mm - table top dimensions 2040x1220mm in advance: -Triggers - pulling shaft, toothed -Triggers - shaft with saws - slip shaft, pressure shaft From below: - rollers in front of the tabletop, 2 pcs -Guide -Triggers -caterpillar - central lubrication of the track - electric shaft lifting with saws - Electric body lifting - Infinitely variable feed speed - extraction spigot diameter 140mm, 160mm - main motor 30kW - total dimensions length/width/height 2600x2300x1850mm - weight about 4000kg ADVANTAGES – Czech production – used multi-rip saw – very good condition Net price: 37900 PLN Net price: 8614 EUR depending on the price of 4.40 EUR (Prices may change with higher fluctuations)
Hump Shredder PHSS 40/110 Specifications: Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Year of Make: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: fast-running shredder shaft with counter comb Remark: The machine is in working condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or YouTube channel. Viewings are possible at any time by arrangement. We are also happy to carry out tests with your material on request for an expense allowance. We will also be happy to answer any questions you may have about the machine by phone from Monday to Thursday from 08.00 to 14.00 h. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The ...
No.: 56218 Power: 4 kW with hose pump and control cabinet highly specified, as good as new
Bosch 0811402001, Bosch 0811403001, Bosch 0811402073, Bosch 0811402105, Bosch 0811404042, Bosch 0811404090, Bosch 0811404750, Bosch 1037001150, Bosch 1817414296, MOOG D651-129B , and more...
Used injection molding tools for the manufacture of plastic slippers. Offer total 43 pcs. refers to two cavities tooling and accessories. From small children (23) to men (45) in size, it is suitable for the manufacture of slippers of various types and colors. For sale total 12,900 Euro
3x Bradley & Turton 50ton Upstroking Presses 380mm x 380mm (15”) sq platens Electrically heated platens 540mm (22”) daylight Fully guarded With individual temperature controls
Raimann ProfiRip KR 310 M My. 2004 Multi-blade rip saw with 2 adjustable saw blades Track width 340 mm Total - passage width max 950 instead of 800 mm Cutting height with / without pressure board 115/130 mm Workpiece length 450 mm min Saw blade max. diameter 380 mm Saw blade min. diameter 250 mm Saw blade bore 80 mm Saw spindle diameter 65 mm Saw spindle speed 3900 rev / min Engine 30 kW Laser - directional lights 3 pc. Operating push 6 bar Infinitely variable feed - speed 8-48 m / min. 1.5 kW Weight 3400 kgs Voltage 400V/50Hz
maximum number of results exceeded
please refine your search
