87379 results demag p

Category: 212 peripheral equipment (e.g. heating, conveying, drying)
Latest update: 23.12.2025
approved
dealer
item-No.: 25605708
New in: 2004

used

Location: Land-de
Price: VB 1.690 €

Bagging filter PAFO 3/3-20/1518 with vibratory motor with Duct bend Channel Non-return valve Duct fitting without fan Year of manufacture 2004 L x W x H: 200 x 70 x 300 cm Weight 350 kg The bagging filter is in good condition, ready to use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 1002 plants for production and converting of building materials
Latest update: 29.12.2025
item-No.: 152556536
New in: 2025

new

Location: Land-rs

This machine can be considered as an ultimate solution for the production of concrete elements providing the one to choose numerous options as an additional upgrade to the machine that can make production even more efficient: Filling box on servo drives Filling boxes both from the coarse mix and face mix powered with 2 servo motors create fast movement back and forth contributing reliable filling of the mould. As for the coarse mix device filling box it is additionally equipped with an agitator (driven by the hydraulic cylinder) for equal and fast filling. Servo vibration Hi-dynamic Servo vibration system transmits power for the high compaction with the just right consumption of electrical power to vibration table consisted of impact and ledge bars and thus providing top-quality paving stones, blocks, curbstones as well as any other products which modern demanding market requires ...

Category: 1200 machines and plants for process engineering / Mixers
Latest update: 02.10.2025
approved
dealer
item-No.: 26324285

new

Location: Land-de

Capacity: 8,000 litres water filling Volume: approx. 7,000 litres Bulk density: max. 0, 6 kg / litre Maximum filling: 4200 kg •Bowl, cover, swivel arm, mixing screw, spout housing made of V2A Traverse from mild steel, is covered but to the tank interior with a V2A plate. -All lubricants are H1 & halal approved and certified ATEX Zone 21 Consideration and introduction of the ATEX zoning 21 within the mixer. -Infrarot sensor Temperature monitoring tips storage with PT 100 Dampers manhole Explosion protection document Monitoring unit with temperature display

Category: 701 basic foodstuffs and animal feeds machines
Latest update: 02.10.2025
approved
dealer
item-No.: 26350713

new

Location: Land-de

New machine Capacity: 8,000 litres water filling Volume: approx. 7,000 litres Bulk density: max. 0, 6 kg / litre Maximum filling: 4200 kg •Bowl, cover, swivel arm, mixing screw, spout housing made of V2A Traverse from mild steel, is covered but to the tank interior with a V2A plate. -All lubricants are H1 & halal approved and certified ATEX Zone 21 Consideration and introduction of the ATEX zoning 21 within the mixer. -Infrarot sensor Temperature monitoring tips storage with PT 100 Dampers manhole Explosion protection document Monitoring unit with temperature display

Category: 832 post press: folders
Latest update: 03.05.2021
approved
dealer
item-No.: 152677199
New in: 2005

used

Location: Land-de

Category: 835 post press: stitchers
Latest update: 03.05.2021
approved
dealer
item-No.: 152677249
New in: 1979

used

Location: Land-de

Category: 834 post press: perfect binders / Adhesive binders
Latest update: 03.05.2021
approved
dealer
item-No.: 152677250

used

Location: Land-de

Category: 1108 spare parts
Latest update: 04.05.2026
approved
dealer
item-No.: 26350743

used

Location: Land-de
Price: VB 22.500 €

RECON Part number: 303120B ---------------------------------------------------------------------- ---------- Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us

Category: 706 beverage machines
Latest update: 26.03.2026
item-No.: 27865015
New in: 2007

used

Location: Land-pl
Price: 35.000 €

TETRA PAK WRAP AROUND CARD BOARD PACKER, MODEL TCBP 70, MANUF. IN 2007, EXCELLENT CONDITION, VERSION 110, Z-FORM. 15000 RUNNING HOURS

Category: 821 pre press: imagesetter and CTP / CTP Systems
Latest update: 03.05.2021
approved
dealer
item-No.: 152677300
New in: 2004

used

Location: Land-de

Category: 822 pre press: scanners
Latest update: 03.05.2021
approved
dealer
item-No.: 152677303
New in: 1998

used

Location: Land-de

Category: 822 pre press: scanners
Latest update: 03.05.2021
approved
dealer
item-No.: 152677309
New in: 1999

used

Location: Land-de

Category: 824 pre press: software
Latest update: 03.05.2021
approved
dealer
item-No.: 152677321
New in: 2006

used

Location: Land-de

Category: 819 presses: accessories and spare parts
Latest update: 03.05.2021
approved
dealer
item-No.: 152677335
New in: 2003

used

Location: Land-de

Category: 836 post press: other
Latest update: 03.05.2021
approved
dealer
item-No.: 152677359

used

Location: Land-de

Category: 836 post press: other
Latest update: 03.05.2021
approved
dealer
item-No.: 152677364
New in: 2014

used

Location: Land-de

Category: 834 post press: perfect binders
Latest update: 03.05.2021
approved
dealer
item-No.: 152677383
New in: 2007

used

Location: Land-de

Category: 834 post press: perfect binders
Latest update: 03.05.2021
approved
dealer
item-No.: 152677410
New in: 2002

used

Location: Land-de

Category: 819 presses: accessories and spare parts
Latest update: 03.05.2021
approved
dealer
item-No.: 152677414
New in: 2013

used

Location: Land-de

Category: 834 post press: perfect binders / Strapping machines
Latest update: 03.05.2021
approved
dealer
item-No.: 152677415
New in: 1999

used

Location: Land-de

Category: 831 post press: cutters and guillotines
Latest update: 03.05.2021
approved
dealer
item-No.: 152677421
New in: 2011

used

Location: Land-de

Category: 836 post press: other
Latest update: 03.05.2021
approved
dealer
item-No.: 152677429
New in: 2010

used

Location: Land-de

Category: 834 post press: perfect binders
Latest update: 03.05.2021
approved
dealer
item-No.: 152677517
New in: 2011

used

Location: Land-de

Category: 406 shrinking machines
Latest update: 24.11.2025
approved
dealer
item-No.: 27420787

used

Location: Land-de
VS

Pester Straff-banding machine type Pewo mat 450SN Bundle Packers pester PEWO-Pack 450 SN Stretchwrapper -Modified in 2016. -Memorized (max. mm): - Insert length 300, - rack width 540, - rack 250, - seal width 450, - power: 24 cycles/min. -With shrink tunnel PEWO-therm II, passage height 130 mm, machine is with new hardware and software Mitsubishi operation via touch panel and new paint in silver offers. Infeed conveyor with Stacker in the direction of the production flow with 90 ° high thrust

Category: 836 post press: other
Latest update: 03.05.2021
approved
dealer
item-No.: 152677540
New in: 2000

used

Location: Land-de

Category: 832 post press: folders
Latest update: 03.05.2021
approved
dealer
item-No.: 152677548
New in: 2002

used

Location: Land-de

Category: 1200 machines and plants for process engineering
Latest update: 11.12.2025
approved
dealer
item-No.: 27923326
New in: 2008

used

Location: Land-pl
VS

Used laboratory vacuum homogenizer made by PT-MASZ (Poland), model HP-5. New 2008. Working capacity Vr = 5 L. Main motor power of 2.2 kW. Specifications HP-5: - Performance: by. needs laboratory - The capacity of the main tank: V = 5 L - Vacuum: ~ 0.05 MPa - Power supply: 3x400 V, 50 Hz Dimensions: - Length: 750 [mm] - Width: 650 [mm] - Height: 1200 [mm]

Category: 819 presses: accessories and spare parts
Latest update: 03.05.2021
approved
dealer
item-No.: 152677578
New in: 1999

used

Location: Land-de

Category: 801 presses: sheetfed 1-color
Latest update: 03.05.2021
approved
dealer
item-No.: 152677600
New in: 1990

used

Location: Land-de

Category: 824 pre press: software
Latest update: 03.05.2021
approved
dealer
item-No.: 152677627
New in: 2005

used

Location: Land-de

Category: 824 pre press: software
Latest update: 03.05.2021
approved
dealer
item-No.: 152677628

used

Location: Land-de

Category: 824 pre press: software
Latest update: 03.05.2021
approved
dealer
item-No.: 152677629
New in: 2008

used

Location: Land-de

Category: 824 pre press: software
Latest update: 03.05.2021
approved
dealer
item-No.: 152677630
New in: 2002

used

Location: Land-de

Category: 824 pre press: software
Latest update: 03.05.2021
approved
dealer
item-No.: 152677631
New in: 2017

used

Location: Land-de

Category: 824 pre press: software
Latest update: 03.05.2021
approved
dealer
item-No.: 152677632
New in: 2010

used

Location: Land-de

Category: 835 post press: stitchers
Latest update: 03.05.2021
approved
dealer
item-No.: 152677640

used

Location: Land-de

Category: 821 pre press: imagesetter and CTP / CTP Systems
Latest update: 03.05.2021
approved
dealer
item-No.: 152677714
New in: 2001

used

Location: Land-de

Category: 831 post press: cutters and guillotines
Latest update: 03.05.2021
approved
dealer
item-No.: 152677786
New in: 2006

used

Location: Land-de

Category: 824 pre press: software
Latest update: 03.05.2021
approved
dealer
item-No.: 152677855
New in: 2007

used

Location: Land-de

Category: 824 pre press: software
Latest update: 03.05.2021
approved
dealer
item-No.: 152677860

used

Location: Land-de

Category: 824 pre press: software
Latest update: 03.05.2021
approved
dealer
item-No.: 152677869
New in: 2006

used

Location: Land-de

Category: 824 pre press: software
Latest update: 03.05.2021
approved
dealer
item-No.: 152677870
New in: 2007

used

Location: Land-de

Category: 824 pre press: software
Latest update: 03.05.2021
approved
dealer
item-No.: 152677871
New in: 2012

used

Location: Land-de

Category: 824 pre press: software
Latest update: 03.05.2021
approved
dealer
item-No.: 152677875
New in: 2008

used

Location: Land-de

Category: 831 post press: cutters and guillotines
Latest update: 03.05.2021
approved
dealer
item-No.: 152677898
New in: 1993

used

Location: Land-de

Category: 821 pre press: imagesetter and CTP / CTP Systems
Latest update: 03.05.2021
approved
dealer
item-No.: 152677930
New in: 2009

used

Location: Land-de

Category: 834 post press: perfect binders
Latest update: 03.05.2021
approved
dealer
item-No.: 152677941
New in: 2001

used

Location: Land-de

Category: 832 post press: folders
Latest update: 03.05.2021
approved
dealer
item-No.: 152677995
New in: 2011

used

Location: Land-de

Category: 835 post press: stitchers / Cross layers
Latest update: 03.05.2021
approved
dealer
item-No.: 152678013
New in: 1997

used

Location: Land-de

Category: 835 post press: stitchers / Cross layers
Latest update: 03.05.2021
approved
dealer
item-No.: 152678015

used

Location: Land-de

maximum number of results exceeded
please refine your search

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information