129,231 used machines on RESALE, but how to find them? Machine Search
Demag 1000kg 13/3PF4, Electr. Trolley + C Rail Cable Cable Trolley Chain Hoist Total weight approx. 80 to 120 kg. Good used condition, full function. The cover caps on the hand control unit are missing. Ride back and forth at one speed each. Lifting and lowering at two speeds each. There are 3 C rails with associated connectors. Total length approx. 14m. Including flat cables and sufficient cable trolleys that run in the C rails. Except for the H-beam, the system is then complete.
Key data: 600 kN, 94 g/PS, 30 mm
Clamping force: 60t Year of Make: 2001 Injection weight in hp: 94g Injection Unit .../200 Screw diameter 30 mm Spec. Spray pressure 1995 bar Injection volume 106 cc Injection weight in hp 94 g L/D Screw Ratio 20 Clamping unit 600/... Clamping force 60 t Size of the clamping plates 600 x 600 mm Lights spar spacing 420 x 420 mm Tool installation height 200 mm Opening way 550 mm Max. panel spacing 750 mm Weight 3950 kg Dimensions(m) LxWxH 4.2 x 1.4 x 2.0 m Year of construction 2001 Control type NC4
Key data: 600 kN, 94 g/PS, 30 mm
Clamping force: 60t Year of Make: 2001 Injection weight in hp: 94g Injection Unit .../200 Screw diameter 30 mm Spec. Spray pressure 1995 bar Injection volume 106 cc Injection weight in hp 94 g L/D Screw Ratio 20 Clamping unit 600/... Clamping force 60 t Size of the clamping plates 600 x 600 mm Lights spar spacing 420 x 420 mm Tool installation height 200 mm Opening way 550 mm Max. panel spacing 750 mm Weight 3950 kg Dimensions(m) LxWxH 4.2 x 1.4 x 2.0 m Year of construction 2001 Control type NC4
Overhead crane, crane, trolley, crane running gear, crane trolley, girder trolley, head girder for bridge cranes, ceiling crane head girder, head girder single girder bridge crane -Manufacturer: Demag, 1 set of end girders for single girder bridge crane -Type: ELV -Load capacity: kg -Carrying rollers: Ø 160 mm -Hole spacing: 290 mm Ø 20 mm / Dimensions see photos -Transport dimensions: 2355/365/H245 mm -Weight: 302 kg
Additional title: Slewing crane, Maximum load: 2000 kg, Reach: 4 m , Lifting height: 3 m, Length: 4,00 m, Height: 4,61 m
B&A REF: 9314 TON: 420 SCREW DIAMETER: 70MM SHOT WEIGHT: 1090 STROKE VOLUME: 1212CM3 INJECTION PRESSURE: 1877AR PLATEN SIZES: 1200 X 1100MM DBTB: 810 X 710MM MIN MOULD HEIGHT: 380MM MAX MOULD HEIGHT: 820MM MOULD OPENING STROKE: 710MM MAX DAYLIGHT: 1530MM EJECTOR STROKE: 230MM CONTROLS: NC4 CORE PULLING: 2 AIR VALVES: 3 MOTOR: 45 HEATING CAPACITY: 27KW ROBOT INTERFACE: EUROMAP SCREW DRIVE: HYDRAULIC
Dominioni Punto & Pasta Pasta extruder machine Stainless 8Kg hopper with agitator and stainless screw, variable speed, variety of extrusion plates for different style pastas, mobile
The electricity and gas-powered plant enables surface treatment of plastic films by flames. Field of application: Z.B. reverse films in the solar industry COMPONENTS • PSA Reversible Unwinding and Reversible Winder 2200/12 PSA W/ARW 2200/12 – Fyling Splice • Hill/ Jungwirth burner unit for gas/air mixture • Suction • Erhardt+ Leimer web edge control • OCS camera system for error detection • Semket labelling system for marking defects • GWK temperature control units for roller cooling SKL SP HC300 330KW
General SKU345S761 LocationBarneveld MakeUnex Heatexchanger GmbH (DE) TypeHybrid No.HB 25228400028 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Number of stages:1 Heating surface5,7 m2 Capacity42 Ltr ConnectionsDN80(2x), DN 50(2x) Max. temperature-30/200°C. Information Floorspace1,0x0,7 M Total height1,0 M Weight260 KG Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barne ...
General SKU345S754 LocationBarneveld MakeUnex Heatexchanger GmbH TypeHybrid No.HB 25228400034 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangersHybrid Number of stages:1 Heating surface5.7 Capacity42 Ltr ConnectionsDN50(2x), DN100, DN40, DN80(2x) Max. temperature-30/200°C. Information Floorspace0,9x Total height1,0 M Weight260 KG Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barne ...
General SKU345S1121 LocationBarneveld MakeUnex TypeKondensator No.HB25228400032 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Heating surface5.7 m2 Capacity42 Ltr. ConnectionsDN80 (2x), DN50 (2x) Max. temperature-30/200 °C Information Total height0,7 m Weight260 Kg Floorspace0,9x1 m Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU345S814 LocationBarneveld MakeUnex Heatexchanger GmbH TypeHybrid No.HB 25228400033 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Number of stages:1 Heating surface5,7m2 Capacity42 Ltr ConnectionsDN100, dn80(2X), DN50, DN40 Max. temperature-30/200°C. Information Floorspace0,9 x 0,7 M Total height1,0 M Weight260 KG Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in B ...
General SKU345S784 LocationBarneveld MakeUnex Heatexchanger GmbH TypeHybrid No.HB 25228400035 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface12 m2 Size length1200 mm Sizes width1100 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangersfully welden plate heat exchanger Heating surface12 m² Capacity111 Ltr., 57 Ltr. (shell) ConnectionsProduct: (2x)DN80, DN40: Plates: DN150, DN80 Max. temperature-30/200 °C Information Floorspace1,2 x 1,1 m Total height0,8 m Weight490 kg Extra Specificationssuitable for use as a condenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinati ...
General SKU345S770 LocationBarneveld MakeUnex Heatexchanger GmbH TypeHybrid No.HB 25228400030 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Number of stages:1 Heating surface5,7 M2 Capacity42 Ltr Connections(2x) DN50,(2x) DN80 Max. temperature-30/200°C. Information Floorspace0,9x0,7 M Total height1,0 M Weight260 KG Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld ...
General SKU329T1340 LocationBarneveld MakeDec TypeDrum sealing cover No.DSC-130 Year of construction2016 Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler MaterialGlass, Stainless steel 1.4435 (316L) Information Mounted in framecheck Total height2,9 m Weight400 kg CEcheck Floorspace0,79x1,32 m ATEX compatiblecheck Extra SpecificationsWith powderbox, Dia:500x200mm lifting column stroke 320mm balancer cap. 7,5-11,5 kg suction lance DN40 triclamp x approx 1500mm cip connection Stäubli R 1/4” hub 2000mm, Magnehelic box Bizerba weighing scale, type ST-D-Z2, (Ex) Dec powder transfer system, type PTS 80-N cap. 500l/h temp range max 100°C pressure -50/+50 PED class Gas 2/ Art. 3.3, consumption 5 Nm3/h (stickstoff) at 3 bar, product input DN 32 Triclamp, product output DN80 PN10, pneumatic control, dim. 600x380x210 mm, roll conveyor, ...
General SKU330W1522 LocationBarneveld MakeAro Type650-607 Mach.No.90’ 1747 Pressure Working pressure10 Bar Main Features MaterialStainless steel Specified Features - Centrifugal Pump MaterialStainless steel Centrifugal Pumps Pumpcheck Number of pumps:1 Pneumatic drivecheck Outletdia. 25 mm Information Year of construction1990 Mounted on wheelscheck With switchcheck Floorspace1,30x0,63 m Total height1,80 m Weight300 kg Extra SpecificationsDrum air pressure pump, Festo pressure cabinetCentrifugal PumpsAroPumps > Centrifugal PumpsBrand > Aro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU330W1524 LocationBarneveld MakeAro Type650-607 Mach.No.15’1064 Pressure Working pressure10 Bar Main Features MaterialStainless steel Specified Features - Centrifugal Pump MaterialStainless steel Centrifugal Pumps Pumpcheck Number of pumps:1 Pneumatic drivecheck OutletDia. 25 mm Information Year of construction2015 Mounted on wheelscheck With switchcheck Floorspace1,30x0,63 m Total height1,80 m Weight300 kg Extra SpecificationsDrum air pressure pump, Festo pressure cabinetCentrifugal PumpsAroPumps > Centrifugal PumpsBrand > Aro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU345S769 MakeUnex Heatechager GmbH TypeHybrid No.HB 25228400038 Year of construction2001 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface22 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Number of stages:1 Heating surface22m2 Capacity166 Ltr ConnectionsDN150. DN80(4X) Max. temperature-30/200 degr.C. Information Floorspace1,5x0,8 M Total height1,2 M Weight560 KGPlate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU345S756 MakeUnex Heatexchanger GmbH TypeHybrid No.HB 25228400036 Year of construction2000 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface12 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Number of stages:1 Heating surface12m² Capacity111 Ltr. ConnectionsDN100, DN80(2x), DN40,DN150, DN80 Max. temperature-30/200°C. Information Floorspace1,2x0,8 M Total height1,1 M Weight490 KG Extra SpecificationsCondenserPlate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us ...
General SKU345S757 MakeUnex Heatexchanger GmbH TypeHybrid No.HB 25228400027 Year of construction2000 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Number of stages:1 Heating surface5,7m2 Capacity42 Ltr ConnectionsDN100, DN50(2x), DN40, DN80(2x) Max. temperature-30/200°C. Information Floorspace0,9x0,7M Total height0,7 M Weight260 KG Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in ...
General SKU331N554 LocationBarneveld CEcheck MakeCERTUSS Dampfautomaten GMBH (DE) Pressure Working pressure0.8 Bar Main Features MaterialStainless steel Volume100 Ltr. Motor0.37 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity2 m3/h With motor0,37 kW (400V) MakeSpeck Inlet29 mm Outlet25 mm Centrifugal Pumps MaterialStainless steel Information TypeJunior 600 Kondensathebeanlage Mach.No.9252/va172828 Year of constructionunkown Mounted on framecheck With switchcheck Floorspace1,3 x 0,9 m Total height1,2m Weight150 kgCentrifugal PumpsCertussPumps > Centrifugal PumpsBrand > Certuss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld ...
General SKU305U634 MakeHaver & Boecker LocationBarneveld CEcheck Type1 WXEH- (U) Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler MaterialStainless steel 1.4301 (304) Powder fillercheck Bag fillercheck Pneumatic fillingcheck Number of dosing heads:1 Dosing15 and 20 kg (max. 50 kg) Capacity30-100 bags/hour a 15 and 20 kg With motor 7,5 kW, 400 volt, 1500 rpm (EX) With hoppercheck Hopper sizesDia. 400x640 mm With mixer in hoppercheck Information No.51/246325/01 Year of construction2005 Mounted in framecheck With switchgearcheck Floorspace1,4 x 1,8 m Total height2,1 m Weight800 kg ATEX compatiblecheckPowder fillersPowdered foodsHaver & BoeckerPackaging machines > Powder fillersIndustries > Food & Feed > Powdered foodsBrand > Haver & Boecker What you can expect from Foeth: -- Machine is in working condition -- At a reduce ...
turning diameter: 330 mm turning length: 510 mm control: FANUC 18i - T turning diameter over bed: 600 mm turning diameter over slide: 550 mm x-travel: 250 mm z - travel: 580 mm y-travel: 100 (±50) mm b-axis: 0.001 mm rapid travel x/y/z: 20/7,5/24/ m/min rapid taverse: B- Achse 20 m/min c-axis: 4.500/ 6.000 ° spindle passage: 76/ 45 mm spindle nose: A2#6 spindle turning speed range: 4.500/ 6.00 U/min spindle drive: 15/ 7,5 kW Turret: 12- fach Stationen Chip coveyor: Inkl. chuck: Hauptspindel 210 mm chuck: Subspindel 160 mm total power requirement: 50,7 kVA weight of the machine ca.: 4,9 t dimensions of the machine ca.: 3.118 x 1.705 x 2.076 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CDM PREALPINA REGRANULATING LINE 130 mm 2xdegassing, for PE PP PS PP PC ABS (it has been working with clean scraps only), extruder with 130 mm. screw Ø 40L/D, including buffer silo with agitators, horizontal extraction screw, crammed feeding unit synchronized to extruder screw, a.c. 283 kw drive, n.2 degassing pumps, semi-automatic screen changer 230 mm diam.screens , water ring pelletizing unit, stainless steel drying centrifuge, vibrating screen, electric cabinet, blower + pipings, vertical mixer, machine reconditioned, can be fitted with a [FIMIC RAS](.germanplast/listings/5241333-refurbished-fimic-ras-400-automatic -screenchager-reconditioned) fully automatic screenchanger, installed power - used power in work: about 60-65% : 435, capacity: 500-600 kg/h, availability: 5 weeks time, options available: fully automatic screenchanger, conditions: refurbished, type: double degassing for ...
Glaze line, Type Jelly Power Pack JLC, Fabr. Boyens,
Plasma Cutting Machine, Plasma Cutting Machine MESSER GRIESSHEIM Type Plasmastar HA 95Fabr. No. 4040 Year of construction 1990Power 95 Amp. - 60% ED 45 Amp. - 70 % EDEsetting range 2 stepsCutting capacity 25 mm (clean cut)Separating cut max. 45 mmHand torch PHC 95/140Power connection 380 volts, 50 Hz, 32 Amp. Plug- Water-cooled- 8 meters hose package length- Operating instructionsSpace required L x W x H 900 x 480 x 850 mmWeight 160 kgvery good condition; used
Hilger & Kern P80 Pump Basic version P80 Barrel size 80l Gear ratio (drive) 56:1 Flow rate (with 20 double lifts) l/min 0.61 Material Viscosity (ball valve pump/scoop piston pump) 2.5 million Working pressure (max.) bar 20-250 (315) Air consumption at 20 double strokes l/min 220 Dimensions base plate (A x W) mm 610 x 500 Height retracted mm 1400 Height extended mm 2200 Weight without container kg 65 / 72 Maximum container height mm 750 Maximum container size 80 Maximum container Ø outside mm 440 A single pump is included Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!
used chamber filter press / filter press Passavant A 1500 record size: 1500 x 1,500 mms benefit length: 10,510 mms chamber number: 160 pieces cake thickness: 30 mms cake contents: 8.4 m3 filter pressure: 16 cash Schliessdruck: 380 volts expiry: unanimously whole filter surface: 614.5 m² engine tension: 380 volts / 50 hertz
Used Membrane Filter Press, Chamber Filter Press for sludge dewatering Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix-Paket) Plate size: 1000x1000mm Cake thickness: 40 mm length: 5500 mm Number of Plates: 60 filter pressure: 8 Bar Membrane pressure: 15 Bar Plate transport: manuell filterclothes: optional Membranmix-Paket The machine is in a goog condition and 15 machines like this availabe.
Status: New Manufacturer: Pfeiffer Type: TMH 064 Mod.-Nr.: PM P02 366 Remark To operateonly with appropriate pre pump and control. delivery time: on request; ready for use
Waelz piston pump booster Manufacturer: Busch Type: Panda WV 0500 C/B and Panda WV 1000 C/B available suction swells: 500 - 1000 m3/h Performance: 12 months Status: Generalueberholt Delivery time: by arrangement; ready for use
Waelz Piston Pump Booster Vacuum Pump Manufacturer: Busch Typ: Puma WP 1000 D2 Status: used, tested A complete recovery can be offered as an alternative. Then with 12 months of service to the geraet.; ready for use
l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw
Status: As good as new Manufacturer: Pfeiffer Type: TMH 064 Model No.: PM P02 366 Comment To operate only with appropriate backing pump and control. Shipping time: On request; ready for operation
The BTS drum press PLC auto is ideal for compressing 30 to 220 litre steel drums, but it can also be used to compress plastic and cardboard drums very easily. In many cases this compressed recyclable material can then even be remarketed. The barrel press is particularly characterized by its reliable and easy operation. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, save significantly on your disposal costs and properly return the material to the recyclable material cycle. Pressing force: 24 tons Machine dimensions: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compression: 8:1 Pressing time: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phases) Noise: 68 dB PLC control with automatic pressing cycle 30 litre drip pan with drain tap Pressing punch with mandrels for pi ...
50 m Push Lok plug-in hose, 19 mm, 3/4", 2.1 MPa, 801Plus-12 WP, Parker, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new in original packaging! The hose was purchased from a company's spare parts warehouse, where it was stored for repair purposes. The hose has never been used and is in mint condition. 50 m Parker Push Lok Steckschlauch, 801Plus-12 WP, 19 mm, 3/4", 2,1 MPa, ölverbessert 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian l ...
Hand pitter for plums and plums, with right- and left-handed handle
power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current supply -Manufacturer: Feas, DC Power Supply -Type: PSL C242 -Power: 38 VA -Dimensions: 80/55/H110 mm -Weight: 0.8 kg
power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current supply -Manufacturer: Feas, power supply DC Power Supply -Type: PS3U75024 -Power: 750 VA -Dimensions: 225/175/H215 mm -Weight: 17.3 kg
power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current supply -Manufacturer: Feas, power supply DC Power Supply -Type: PS3U1K224 -Power: 1200 VA -Dimensions: 250/175/H215 mm -Weight: 19,2 kg
Power supply unit, DIN rail power supply unit, switching power supply unit -Manufacturer: Block, DIN rail power supply -Type: PVSB 400/24-40 -Input: 400-500 VAC/50-60 Hz/2.2-1.8 A -Output: 24 V 40 A -Dimensions: 205/130/H130 mm -Weight: 3.1 kg
Measuring head (CMM) rigid probe RENISHAW type PH5 + TP20 + PEL1-50Probe for measuring machineSerial: 77501 - Push button holder probe body TP20 for interchangeable modules (probe modules)Extension - type PEL 1, length 50 mmProbe attachment M8 threadHead mounting with MV shank 9.5 mm- Status indicator with 2 LEDs- Cable connection via 5-pin DIN 180 socket- 5 threaded connections M8 for touch probes (4 pieces blind plug)Total weight 280gused in good condition; used
maximum number of results exceeded
please refine your search
