demag p used for sale

MANUFACTURER: Trepko TYPE: XPG 40 MOULDS: 200- 250 Gr Bricks CAPACITY: 80 pcs per minute DESCRIPTION: Trepko XPG 40 Butter forming and wrapping machine 250 gram butter bricks with capacity 4800 pcs per hour. APPLICATION: Butter, Margarine and similar high viscousity products. PRICE: Please contact Used butter machines for sale, used butter packing machines, used butter wrapping machine for sale, used butter form fill seal machine, trepko butter machine, benhil butte packing machine, margarine packing machine, butter foil wrapping machine, margarine foil wrapping machine, used dairy machinery for sale, used dairy equipment for sale, used dairy machines for sale,

General SKU223N082 MakeEWAC B.V. Broek op Langedijk No.26455-040 Year of construction1996 Mounted on legscheck Pressure Working pressure3 Bar Working pressure jacket3 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1000 Ltr. Pressure3 Bar Specified Features - Pressure vessel Capacity1000 ltr Vessel sizesdia. 750x2210mm Dished topcheck Dished bottomcheck Top connectionsdia. 300mm + dia 100mm + dia. 32mm Outletdia. 100 mm With jacketcheck Max. temperature145 degr. C MaterialStainless steel 1.4401 (316) Information LocationBarneveld Floorspace1,0x1,0 m Total height2,8 m Weight620 kgPressure vesselsEwacTanks > Pressure vesselsBrand > Ewac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the mac ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

General SKU376X1178 LocationBarneveld MakeDriam Main Features MaterialStainless steel Motor1.5 KW Inlet diameter700 mm Specified Features - Coating pan MaterialStainless steel 1.4306 (304L) Coating pancheck Pan diameter1300 mm Pan depth800 mm In-/OutletDia. 700 mm Pan can be tiltedcheck Without motor1,5kW, 230/400V, 1395 rpm. Pan speed17 rpm. With fancheck Information Typedriapan Year of constructionunknown Floorspace1,3x1,8 m Total height1,9 m Weight620 kgCoating pansDriamCoating pans > Coating pansBrand > Driam What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Size: 380 mm Equipments: cold glue, Exhaust, Paper mill max.lenght 380mm; max.thikness 40mm; max.hight 350mm; with mill and vacuum device

Neerwaartse persbeweging met zijdelingse belasting - maximale openingsafstand: 400 mm - slag: 400 mm - Tafelafmetingen: 3500 x 3000 mm - De bovenste tafel kan verwarmd worden - De onderste tafel is niet verwarmd - 12 zuigers (diameter 90 mm)

PAPER CARTON SORTER good condition Available now! cheap to give away

4 controlled axes for profile processing X-axis travel: 7,200 mm A-axis rotation: 0°-180° Speed range: 0-18,000 rpm Tool changer with 8 places on the machine plus additional tool changer in bed Automatic tensioner shift Profile machining Generation X, with Schüco CAM software and controllable About SchüCal+ - Calculation Program Operating hours: Machine in: 15605 hrs / NC in: 3691 hrs Accessories / Equipment: Standard Tool Set (Used) 5.5 KW Spindle (New spindle frequency converter) (New PC / Controller) The machine is overhauled, dimensioned and available for immediate delivery. Weight: approx. 5,000 kg

Manufacturer: Italpresse Model: PRE46 - 3 14-6X180 Year of Manufacture: 2007 Voltage: 400V Frequency: 50 Hz Hydraulic Oil: AGIP OSO 46 Heating System Oil: AGIP ALARIA 3 Certification: CE Find more here - / Contact us at -

1 piece EISELE PSU 450 H metal circular saw Technical data: Saw motor ‐ variable speed by pole switch Gearbox Max. saw blade diameter Ø 450/40 mm, thickness 4 mm (HSS) Clamping cylinder ‐ vertical Long stroke ‐ horizontal Clamping pressure adjustable Operating pressure Mitre cuts Machines ‐ Dimensions W/H/D D=100 x 160 mm D=50 x 8 mm 30 bar. 50 bar. 30°/45°/90°/45°/30° 1000/1860/1330 mm

Generators with diesel engine Engine Type: Perkins 4006-23TAG3A Power: 900 kVA Year: 2014 Hours: 1176 Cooling: Water with front-mounted radiator Speed: 1500 1/min Generator: Stamford HCI 634G1 Voltage: 400/231 V, 50 Hz Subject to prior sale - errors possible! Internal Reference Boom: E-1004-113

CNC Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of Make: 2016 CNC control Working area: 1,500 x 3,000 mm 1 x Plasma with power source Kjellberg HiFocus 161i Preparation for retrofitting oxy-fuel burners Kemper System 8000 filter system with pre-separator Asper Basic nesting software on the CNC control

Four-Way Planer Little Type Powermat 500 Technical data: - Planing width (mm): 230 - Planing height (mm): 140 - Waves: 6 1st Shaft: Down 2nd wave: right 3rd wave: left 4. Shaft: top 5. Shaft: top 6. Shaft: down - Spindle speed (rpm): 8000 - Total connected load (kW): 65 - Rated current (A): 142 - With planer heads Powerlock System - Program memory  - Soundproofing hood  - CE compliant 

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve, pressure reducing valve -Manufacturer: Parker, pressure reducing valve -Type: PRDM2BB16SVG15 -Pmax: 350 bar -Number: 5x valve available -Price: per piece -Dimensions: 185/40/H50 mm -Weight: 1.5 kg

An industrial multi-bath continuous spray cleaning system Pero for components is available. Belt width: 500mm, clearance height: 300mm, max. belt load: 40kg/m, loading height: 900mm, belt speed: 2.8m/min, cleaning volume flow: 320l/min, cleaning pressure: 2bar, machine dimensions X/Y/Z: approx. 5100mm/2100mm/2300mm. Documentation available. An on-site inspection is possible.

Planetary mixer Tonelli PDC 120 Universal 2000 Year of Make: 1989 Condition: functional Siemens control system Boiler capacity: 120 litres Incl. 2 tank cars Incl. 2 tools Accessories of choice and availability

Stamping capacity 550 kN and 280 kN Projection 130 mm or 250 mm

Available from 15.05.2026 Baler Paal Konti 325 G, built in 2013 Technical data: Manufacturer: Paal Type Konti 325 G Year of construction 2013 Operating hours 11,723 (as of 10.02.26) Press force 100 t Drive power 2 x 55 kW Filling opening 1020 x 1750 mm Bale dimensions 750 x 1100 mm, length variable Setting 5-fold automatic Throughput at 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12216 x 2530 x 2800 mm (LxWxH) Machine weight approx. 28,000 kg Materials: paper, cardboard, light waste, plastic waste Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sal ...

Big Bag, 1-place holding structure, complete with supporting hooks, Constructed in solid, painted carbon steel, single place, Machine reconditioned

Polar 58 EM, Year 1994 Program Safety Beams Table Table left Table right Etc. Available: at short term

Polar 78 XT year 2006 with jogger Knorr

Polar 92 ED year 1997 in very good condition Colour monitor light barrier side tables air table

BALLER PAAL KONTI 425 C Technical specifications: Manufacturer: Paal Type: Konti 425C Year of manufacture: 1995 Klsdm Ajx Dk Ttsty Atel Feed opening: 102 x 175 cm Drive power: 170 kW Caedm Atyexx Su Uo Atsa Compression force: 85 t Settings: Horizontal, fully automatic Roll weight: 500-650 kg Press weight: 25 t PRICE ON REQUEST! ----- BALLER PAAL KONTI 425 C Technische Daten: Hersteller: Paal Typ: Konti 425C Herstellungsjahr: 1995 Bwsbjycfuqsmcbw Nveh Einfüllöffnung: 102 x 175 cm Antriebsleistung: 170 kW Kompressionskraft: 85 t Einstellungen: Horizontal, Vollautomatisch Rollengewicht: 500-650 kg Pressgewicht: 25 t PREIS BEI ANFRAGE!

For sale: Paal Konti 425 D horizontal baler Technical specifications: Manufacturer: Paal Type: Konti 425D Year of manufacture: 2002 Feed opening: 102 x 200 cm Drive power: 2 x 45, 2 x 75 kW Kledex Dlanem Aty Atsl Pressing force: 115 t Settings: Horizontal, fully automatic Roll weight: 550-850 kg Pressing weight: 36 t PRICE ON REQUEST! ----- Verkaufen horizontal Baller Paal Konti 425 D Technische Daten: Hersteller: Paal Typ: Konti 425D Baujahr: 2002 Einfüllöffnung: 102 x 200 cm Antriebsleistung: 2 x 45, 2 x 75 kW Druckkraft: 115 t Einstellungen: Horizontal, Vollautomatisch Rollengewicht: 550-850 kg Pressgewicht: 36 t PREIS BEI ANFRAGE!

Technical data: Manufacturer: UNI CARRIERS Type: PS125TV269 Year of Make: 2013 Battery Min. battery weight: 140 kg Max. battery weight: 215 kg Battery voltage: 24 V Dimensions and weight Weight without battery: 600 kg Condition Condition: Used Functional: Tested and fully functional

Heidolph Pumpdrive PD 5206 Peristaltic Pump 1 Channel Motor speed: 24 to 600 rpm Flow rate: 1.3 to 3.9 mL/min Weight 7.7 kg With HEIDOLPH SP QUICK single-channel pumphead In excellent condition Year of Manufacture: 2006

Polar 92 E Year of Make: 1996 E version, color monitor, Air table, 2x side tables, Spare blade Very good condition!

Cole-Parmer Masterflex I/P 77410-05 BDC drive standard peristaltic pump, 77600-62 head Pump rotation speed: 65 to 650 RPM With 77600-62 high-performance pumphead with thermoset polyester housing, stainless steel Flow rate: 0.01 to 19 l/min. Tubing Type: I/P 70, I/P 88, I/P 89 Equipment tested

Millipore Milliflex PLUS MXP PUMP 03 Model: MXP PLUS 03 With 3 microwire adapters 3 Filtration Pumps (Milliflex Plus) 3 x 24 W

Thermalcycler PTC-200 DNA Engine block 96 well Pcr BIO-RAD Temperature range: approx. -5°C to 105°C Heating/cooling speed: up to 3 °C/s Temperature accuracy: 0.3°C to 90°C Capacity: 96 wells (double block) Dimensions (W x D x H): approx. 30 x 35 x 30 cm Weight: approx. 12 kg Power supply: 100-240 V, 50/60 Hz With Alpha BioRad PTC DNA Engine Systems Thermal Cycler PCR Lab Unit Block (Serial No.: AL057123)

General SKU268N283 MakeWilhelm Schmidt TypeGEV 1000 No.94.0119 Year of construction2006 LocationBarneveld Pressure Working pressure1 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1120 Ltr. Pressure1 Bar Specified Features - Pressure vessel MaterialStainless steel Capacity1120 Ltr Vessel sizesdia. 1200mm x1300 mm Dished topcheck Dished bottomcheck Max. temperature-60/50 degr.C. Information Floorspace2,6 x 1,4 M Total height1,8 M Weight400 KG Extra Specificationswith collectbinPressure vesselsWilhelm SchmidtTanks > Pressure vesselsBrand > Wilhelm Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machin ...

Turntable diameter: 1500mm, max. load capacity: 1500kg, max. pallet dimensions X/Y: 1200mm/1000mm, max. pallet height: 2100mm, speed: 12rpm, max. film roll width: 500mm. An on site inspection is possible.

Okta 6000 - New und with Motor Okta 1000 - neu without Motor 1. Pfeiffer Vacuum Okta 6000The Pfeiffer Vacuum Okta 6000 is a Roots vacuum pump (also known as a Roots blower or vacuum booster). It is designed for industrial applications that require high pumping speeds in low and medium vacuum ranges.Primary Function: It acts as a "booster" to increase the pumping speed of a vacuum system, usually paired with a backing pump (like a rotary vane or screw pump).Performance: It has a nominal pumping speed of approximately 6,000 to 7,300 m³/h. Find more here - / Contact us at -

Tube film width: 60-215mm, film thickness: 0.06-0.12mm, max. tube film roll diameter: 300mm, film core diameter: 76mm, bag length: 60-600mm, output at bag length 100mm and film thickness 0.06mm: 15 pcs/min, print image dimensions: 300x213mm, print length: max. 300mm, optional print length: up to 600mm, table dimensions: 880x460/600mm, table height: 850mm, connected load: 2.3kW, fuse protection: 10A, supply pressure: 6bar, rel. humidity: 25%-85%, noise emission: 75dB(A), length: 1200mm, width: 1200mm, height: 1550mm, weight: 250kg, with documentation. An on-site inspection is possible.

Color: Black Original packaging Minimum order quantity 5 pieces Price per unit €3.43 + VAT Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Black Original packaging Minimum order quantity = 5 pieces Price per unit = 6.00 € + VAT Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Polar 78 XS, Year 2011 Display Program Airtable Table left Table right Etc. Available: at short term

Spark Plug Set (4 pieces) P3V5i series 2.3 | Jenbacher original 21103762 ex 462203 ex 639754

Excellent condition - Fully operational - Loading / Transport possible! Working width approx. 500 mm, motor 4 kW, planing table length 1620 mm, total table length 2850 mm, angle fence swivelling, with narrow dividing rail, SUVAMATIC finger guard, planing shaft with 4 Tersa knives, planing table with slotted table lips.

INSACCHETTATRICE PER SACCHETTI DA 25 KG

Linea di produzione pasta fresca ripiena Pama Roma. Anno di produzione 2018 Composta da: Pressa impastatrice automatica mod. P/120 Per linee di produzione di pasta corta e pasta lunga, impasta e produce sfoglia dfino a 40 cm di larghezza. Rovesciamento vasca automatico, variazione velocità della coclea, asciugatoio, alberi d’impasto estraibili, vasche con bordi arrotondati. Completa di bobinatore sfoglia e refrigeratore. Produzione oraria: 120 kg/h Diametro trafila 159 mm Capacità vasca 40 kg (semola e liquidi) Raviolatrice automatica Brevettata” doppia sfoglia con prodotto staccato, mod. RN/170-SC Completa di uno stampo. La macchina è equipaggiata con alimentatore continuo di ripieno AL/RN Vibrovaglio Mod. VG/R 280 Pastorizzatore a Gas per pasta fresca lunga, corta, ripiena mod. PS/400-G completamente in ACCIAIO INOX copertura della zona di pastorizzazione facilmente asportabile  ...

Pressa a compressione DUROMEL PCVM 300T-EC Tonnellaggio: 300 Anno: 2000 Dimensioni piani riscaldati: 700 x 500 mm Apertura max stampi: 620 mm Corsa max. piano mobile: 500 mm Forza chiusura stampo (regolabile): 300 - 3000 kN Pressione d'esercizio: 235 bar Velocità compressione alla max. forza (regolabile): 0 - 3,2 mm/s Potenza piano caldo superiore: 6 kW Potenza piano caldo inferiore: 6 kW Temperatura piani caldi: 50 - 250°C Altezza piano di lavoro: 1530 mm dal pavimento (si consiglia una pedana di 400 mm con ripari) Piani di riscaldo con stampi per piatti pappa bimbo in melanina. Stampaggio a compressione di elastomeri e termoindurenti. Dotato di dichiarazione CE di conformità.

Capacity: 260 x 130 mm. Spindles: 5 Shaft diameter 40 mm Bottom 4 kW, right/left 7,5 kW, top 5,5 kW, bottom 4 kW Cardan shaft drive Pneumatic pressures Feed speed variable, motor 3 kW Motorised height adjustment of top presssure beam Infeed table 2200 mm length tools not included

Belt width: 260 mm, Description: Including add-on tenderiser of 104 knives, Needles: 21 pcs. of 4 mm, Product height: max 210 mm, Speed: 72 RPM, Power: 3 x 400V, 50Hz, 2.3kW, Dimensions: 1500 x 700 x 1800 mm, Weight: 210 kg

General SKU424X1320 MakeDriam LocationBarneveld TypeDriacoater DRC 1200 Main Features MaterialStainless steel Specified Features - Coating pan Coating pancheck Coating installationcheck Capacity158 l. Batch sizemax. 120 kg Pan diameter1200 mm Pan depth800 mm Motor4 kW, 400 V With frequency controllercheck Pan speed1,5—22 rpm With fancheck With spraying armcheck (99—592 ml/min) With dosing pumpcheck Motor0,37 kW, 400 volt MaterialStainless steel 1.4301 (304) Information No.KD89670 Year of construction2003 With switchgearcheck (as is) Floorspace1,60 x 1,80 m Total height1,90 m Weight2150 kg Extra Specificationswith 2x HERMANN WALDNER tanks: 130 l.: pressure: -1/0,5 bar, temp.: 0 / 100 °C Coating pansDriamCoating pans > Coating pansBrand > Driam What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Read ...