demag p used for sale

Includes (1) DEMAG TC 140 crane, year of manufacture: 1972, load capacity: 50t at 3m radius, slewing angle: 360°, outreach: 5500mm, drive: pneumatic, hydraulic, electric, operating hours: 7153h. (2) Faun LK 910/483-V vehicle, operating hours: 1214h. On-site inspection is possible.

DEMAG ERGOTECH EXTRA 80-430 injection moulding machine was built in 2003 in Germany by Demag Ergotech Wiehe GmbH (now Sumitomo (SHI) Demag Plastics Machinery GmbH). The machine is designed for the economic production of plastic parts of different colours, shapes and sizes, using the injection moulding method. This method involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, guarantee high repeatability of the manufactured parts. The DEMAG ERGOTECH 80-430 EXTRA injection moulding machine weighs 3600 kg. Technical specifications of the DEMAG ERGOTECH EXTRA 80-430 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 40 mm - screw length/diameter ratio: 20 L/D - maximum injectio ...

Presse à injecter DEMAG ERGOTECH 330 T en bon état? Référence : Ergotech E330-1450-NC4S? Année: 1998? 65 000 heures de fonctionnement ? Diamètre vis : 70 mm? Rapport L/D : 20? Volume injectable : 1039 cm3? Poids injectable en PS : 940 gr? Pression d'injection : 1400 bars? Course de dosage maxi : 270 mm?P uissance de chauffe : 27 KW? Dimensions des plateaux : 1040 x 950 mm? Distance entre colonnes : 710 x 630 mm? Epaisseur moule : 330 - 710 mm? Course d'ouverture maxi : 675 mm + Robot SEPRO type 3031 YN MPA II? axe X : 2500 mm? axe Y : 800 mm? axe Z : 1400 mm Dimensions de la machine : 6,50 x 2,00 x 2,30 m? Poids de la machine : 14 300 kg

Column-Mounted Crane DEMAG Capacity: 125 kg Arm travel: 3500 mm Height under hook: 2200 mm Total column height: 3150 mm Height under arm: 2700 mm With electric hoist In good condition Voltage: 380 V Weight: approx 250 kg

B&A REF: 9164 TON: 80 SCREW DIAMETER: 40MM SHOT WEIGHT: 208 STROKE VOLUME: 231CM3 INJECTION PRESSURE: 2025AR PLATEN SIZES: 590 X 580MM DBTB: 400 X 400MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 250MM EJECTOR STROKE: 150MM CONTROLS: NC4 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 11KW SCREW DRIVE: HYDRAULIC

Demag 3,2 ton x 20 meter

Robot - Wittmann-Demag DR853 / High-speed robot Year of Make: 2016 Location: Lodz, Poland Description: 6-axis robot: 5 axes are driven by servo motors (electric): X, Y-telescopic, Z, B, C Traversing in axes: X-1200, Y-2400, Z-4000 Touch control panel The safety package for robots Robot with adapter, protective housing All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

2 x Injection moulding machines Demag 1000 420 310 El Exis S Bj 2003

Demag Ergotech EXTRA 50-200 BJ2005 for sale/scrapping, but the control is already missing here.Enclosed you will find the photos and technical data of the machine for sale with BJ 2005. The machine currently has a plasticizing unit with 25mm screw (BJ 2014) installed, we sell the original plasticizing unit with 30mm screw that is still working for the machine. The machine worked until it was taken out of service, we installed the control system on another machine.

E-chain hoist, electric hoist, crane DEMAG type DKES 2-200 K V2 DIwith Dematik BUS control via crane system controlFabr. No.61456646 Year of construction 2003Lifting capacity: 200 kgHook travel: 4.0 metersMain lifting speed: 14.0 / 19.2 m/min. Fine lifting speed: 0.20 m/min. Chain size 4.2 x 12.2 mm1 Load train = 200 kg- with control logic DKES2/5 500V- without crane operation- Dematik BUS control via crane system control- without roller chassisMains connection: 400 Volt, 50 HzNominal power: 750 WNenncurrent: 2.4

Suspension crane runway Crane system DEMAG type KBK 1Year of construction approx. 2000Monorail overhead track with monorail crane bridgeLight crane system system made of KBK modular system profilesLifting capacity: 125 kgSpan: 5 metresDistance longitudinal rails: 4.1 metresLongitudinal beam length complete: 12 metresGirder profile cross beam = KBK1Girder profile longitudinal rails = KBK1Consisting of:29 metres System profile KBK-1 (4x 6000 mm + 1x 5000 mm)1 piece carriage for the crane suspension2 pieces Double carriage for the longitudinal rails10 pieces Screw claws for the

E-chain hoist, electric hoist, crane DEMAG type DKUN 1-100 K V1 F4Fabr. No.61801899 Year of construction 1997Load capacity 100 kgHook travel 3 metersMain lifting speed 8 m/min. Fine lifting speed 2 m/min. Chain size 3.6 x 10.6 mmCable length Operating bottle approx. 1.7 metersPower supply: 400 volts, 50 Hz1 load train = 100 kgWeight 16.5 kgGood condition; used

E-chain hoist, electric hoist, crane DEMAG type DKUN 1-100 K V1 F4Fabr. No.61801900 Year of construction 1997Load capacity 100 kgHook travel 3 metersMain lifting speed 8 m/min. Fine lifting speed 2 m/min. Chain size 3.6 x 10.6 mmCable length Operating bottle approx. 1.8 metersMains connection 400 volts, 50 Hz1 load string = 100 kgWeight 16.5 kgGood condition; used

Electric chain hoist crane DEMAG type PM 12LF ManuliftElectric crane with one-handed operationFabr. No. 5877813 year of construction 1990Load capacity 125 kgHook travel 3.5 metersLifting speed 12 m/min. Fine lifting speed 2 m/min. Motor power 0.32 / 0.05 kWNeching connection 400 Volts, 50 Hz1 Load train = 125 kgManulift Hand control directly on the crane hookGood condition; used

E-chain hoist, electric hoist, crane DEMAG type DKUN 10-500-K-V3 F6Fabr. No.: 61077868 Year of construction: 1999Load capacity 1000 kgHook travel 6.5 metersMain lifting speed 10 m/min. Fine lifting speed 1.6 m/min.2 load trains = 1000 kgPower supply 400 volts, 50 Hz.- Electric chassis DEMAG, type EU/RU 22 DK, 13/6 PF 12/4- Chassis for double T-beams, beam width 120 to 280 mm- 2 travel speeds 4.6 m/min and 14 m/min- Cable length of the control bottle 4.5 metersWeight 130 kggood condition; used

Column-mounted slewing crane DEMAG type KBK 100Year of construction approx. 2008Lifting capacity 80 kgSwivel range 270 Radius 2500 mmOverall height 1980 mmHeight to lower edge boom 1580 mm- Crane column KBK 100- Boom profile DEMAG C-profile cutter KBK 1- Base plate L x W x H = 260 x 260 x 25 mm (4 holes 18 mm)- painted yellow- Info about the short column, this slewing crane was mounted on a machine stand. The last picture shows a slewing crane mounted hangingdead weight approx. 100 kggood condition; used

Wall slewing crane DEMAG type KBK 2Demag No. boom: KBK- 982 040 44Demag No. wall bracket : 85104044Year of construction 2000Lifting capacity: 500 kgRadius: 4000 mmSwivel range 270Wall mounting plate: 1170 x 440 mmHeight UK- Boom to OK- Wall bracket: 1000 mmFlange plate Wall bracket to middle Bolt: 270 mmTotal length Flange plate Wall bracket to boom tip: 4330 mm: - Boom profile C-profile rail DEMAG KBK 2- Carriage for C-profile rail DEMAG KBK 2- Original paint yellowWeight 170 kgVery good conditionPrice without

E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4Fabr. No.: 63207040 Year of construction: 1993Load capacity 1000 kgHook travel 2.6 metersDistance suspension to load hook 450 mmHood lifting speed 4 m/min. Fine stroke speed 1 m/min. Cable length operating bottle approx. 1.7 metersMains connection 400 volts, 50 Hz.2 load lines = 1000 kg- emergency stopWeight 46 kggood condition; used

Injection moulding machine Sumitomo Demag IntElect 150/520-610, built in 2007 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 150/520-610 Operating hours: 29,125 26,530 Cycle counter 3,562,329

Injection moulding machine Sumitomo Demag IntElect 210/580-1000, built in 2009 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 210/580-1000 Operating hours: 27,297 25,717 Cycle counter 3,450,308

Dryer ComAir DEMAG CAD 430 W/292 W Properties: Total height 1900 mm Length 1200 mm Width 1400 mm Type CAD 430 W/292 W Machines Serial No. 00/4/14381/01 Engine power 4.7 kW Permissible pressure/max. pressure refrigerant side 16/20 bar Permissible pressure/max. pressure compressed air side 16 bar Ab. Ambient temperature min./ max. +2/ +50 °C Operating voltage 400 V Phase 3 Ph Frequency 50 Hz Nominal consumption 4,700 kW Protection class IP 54 Refrigerant R 134a Description: Largest refrigerant machine charge weight 7,500 kg Fuse/Fuse max. 20A Test Group (DruckbehV) I

Group: 2M Kind of: hoist Capacity: 16 ton Drop: 8 meter

4 x Demag injection moulding machines Demag 80 to BJ 2005 Demag 420 to BJ 2003 Demag 420 to BJ 2005 Demag 420 to BJ 2008

Ref. no.: 18565 Hersteller: DEMAG Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005

Demag Jib crane 3 meter / 250 kg

Demag Jib crane 2 meter / 250 kg

Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) En ...

Compressor system / compressed air system composed of: Compressor Type STA-010 Maximum pressure 10 bar Output 0.9m³ per min incl. pressure tank 350l (14BAR) with filter

Clamping Force: 200 ton

Demag 60 ton x 24 100 mm Kind of: overhead travelling crane Capacity: 60 ton Span: 24 100 mm Drop: 23 meter Tackle speed: 1 & 4 m/min Rotationspeed: 12,8 & 50 m/min Displacementspeed: 8 & 92 m/min Numbre of riggers : double rigger

Ref. no.: 17507 Hersteller: DEMAG Year of construction: 1998 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg

Plastic injection molding machine SUMITOMO DEMAG C75 – Year 2008 Sumitomo Demag C75 model, year 2008.

Key data: 3500 kN, 70 mm

DEMAG Ergotech 350/710-2300 Concept • Clamping Force: ~3,500 kN (≈350 ton) • Injection Unit: • Screw Diameter: typically 70 mm • Injection Volume: ~1,212 cm³ • Injection Pressure: up to ~1,877 bar • Tie Bar Spacing: ~710 × 630 mm • Plate Dimensions: ~710 mm plate width • Opening Stroke: ~675 mm

Some older plastic injection molding machines from Arburg, Demag and Stübbe are available. 1) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000kN, shot weight: 140g, mold installation height min./max.: 180mm/480mm, opening stroke: 320mm, tie bar spacing: 360mm/355mm, screw diameter: 40mm, core pulls: 1. 2) Demag D 150-452 NC III, year of manufacture: 1990, clamping force: 1500kN, shot weight: 207g, mold installation height min./max.: 320mm/550mm, opening stroke: 430mm, tie bar spacing: 460mm/460mm, screw diameter: 45mm, core pulls: 1. 3) Demag D 100-275 NC II P, year of manufacture: 1989, clamping force: 1000kN, shot weight: 130g, mold installation height min./max.: 200mm/400mm, opening stroke: 350mm, tie bar spacing: 400mm/400mm, screw diameter: 38mm, core pulls: 1. 4) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250kN, shot weight: 25g, mol ...

Screw diameter: 70 mm Injectable volume Shot volume: 5598 cm3 Injection pressure : 1137 bar Column pass-through: 1060 x 1060 mm Moulded thickness / Mold tickness mini -max: 350 - 1100 mm Opening stroke: 1150 mm Euromap 12 4 hydraulic cores - 4 cOREPULLING

Screw diameter: 45 mm Injectable volume / Shot volume: 358 cm3 Injection Pressure: 2426 bar Column passage / Bettween tie bar: 720 x 720 mm Thickness of the mould mini /Mold tickness -max: 320 - 725 mm Opening stroke: 730 mm Euromap 12 4 hydraulic cores - 4 corepulling

This DEMAG Ergotech System 200-610 hydraulic injection moulding machine was manufactured in 1997. Its a robust option for efficient plastic processing tasks. Contact us for more information.

This DEMAG Ergotech Compact 125-440 hydraulic injection moulding machine was manufactured in 1998. Contact us for more information.

This DEMAG Ergotech System 420-1450 was manufactured in 2004. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this DEMAG Ergotech System 420-1450 hydraulic injection moulding machine. Contact us for more information.

This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information.

This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information.

This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information.

This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke volume of 891 cm³, a injection pressure of 2420 bar, a shot weight of 800 g/PS and clamping force of 4200 kN. The distance between bars are 800x710 mm and the size of mould platens 1200x1100 mm.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information.

This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. Its an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information.

This DEMAG Systec 210/580-840 was manufactured in 2019. Its a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information.

Demag 3,2 ton x 17 500 mm Kind of: overhead travelling crane Capacity: 3,2 ton Span: 17 500 mm

Key data: 1000 , 3420 , 110

DEMAG SUMITOMO ERGOTECH 1000 T Injection Molding Machine - Year 2001 Machine with very low working hours Type: 1000-8000 NC4 Clamping Force: 1000 T / 10 000 KN Screw Diameter: 110 mm Theoretical Injection Volume: 3801 cm³ Injection weight. : 3420 gr Opening Stroke: 1250 mm Daylight : 2450 mm Distance Between Tie bar : 1400 x 1120 mm Platen Dimensions: 1950 x 1670 mm Mold tickness min/max : 500 /1200 mm Total Installed Power: 110 kW Oil Capacity: 2000 L Dimensions: 13.2 m x 3,20 m x 2,90 m Weight: 63 tons Machine sold with a STAR robot