demag p used for sale

Demag hose pouring machine type: Ergotech 500-200 systems control: NC 4 construction year: In 1999 Schliesseinheit Schliesskraft t: 50 opening ways mm: 400 cross-beam measure mm: 355 installation heights min / max. mm: 210 record size: 520 x 520 hose unity snail diameter mm: 30 hose weights gr: 94 hose volumes cm?: 106 hose pressure cash: In 1995 mass and weights dimensions LxBxH m: 3.6 x 1.4 x 1.8 machine weight kg: 2900 other 1 x nuclear trains

Demag hose pouring machine type: Ergotech 330-840 systems control: NC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 330 cross-beam measures mm: 815 x 735 installation height min / max. mm: 330830 record sizes: 1040 x 950 hose unity snail diameter mm: 60 hose weights gr: 560 hose volumes cm?: 636 hose pressure cash: 1351 mass and weights dimensions LxBxH m: 6.5 x 1.9 x 2.2 machine weights kg: 14500

Flat gear brake motor Gear motor Manufacturer: DEMAG Type: KBA112 B12/4 / KBA112B12 / 4 Detailed information on the manufacturers page, see pictures. Condition: New, can have traces of camp, comes from stock. Scope of delivery: see the pictures.

Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.

1 factory-tested, absolutely like new single angle crane Payload 10.000 kg Wingspan approx. 26.610 mm Hook path about 10,000 mm Make DEMAG Year of production/workshop test 2001/2016 Crane equipped with electric wire rope hoist moving on the side of the vehicle, cross and long travel frequency controlled remote control, Working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear (FU) approx. 0-30,0 m / min Crane chassis (FU) approx. 0-40.0 m / min

Mannesmann Demag compressor General repair 2004 Flow rate: 39.5 M ³/min, 2150 m ³/h Suction pressure: 1 bar Max pressure: 10 bar Speed: 1500 rpm Engine power: 250kW Pressure: 8.5 bar

Column-Mounted Crane DEMAG Capacity 500 kg Arm travel 3400 mm Manual arm rotation Column height 3000 mm Column base diameter 700 mm - with base discs (see photo) Electric hoist I beam dimensions: 220 x 100 mm (see photo) Total weight approx 2 T MACHINE IN OUR STOCK IN FRANCE.

E. - Chain hoist / hoist Offer number: 20056 Make: DEMAG Type: PK 1 N-F Machine number: 2388876 Built: 1978 Technical data: - Load capacity 250 kg - Lifting height - chain path approx. 2 m - 2 lifting speeds 1 + 4 m/min - top-sided hanging hoe - Operation of the chain hoist via hand remote scanner - Cable length hand remote scanner approx. 1.5 m - Drive 400 V - Weight approx. 20 kg

Qty. 1 Second-hand strip casting production line Mfc.: EMA-Indutec, Marx, Air Blue, Güntner, Demag, G. Buchholz Built: 1992, 1995, 1997, 1999, 2000 Income material: Scrap Strip width: 300 mm Thickness: 10 – 20 mm – can be reduced! Plate length: 16 m can be extended! Coil weight: 1.5 T (steel) Scope of supply: Induction crucible furnace 20 kV Transfomer Cooling unit Casting machine Duo Mill Stand Coiler Run-out table Quenching Compressor

Qty. 1 Second-hand spinner block Mfc.: Mannesmann Demag Built: 1981 Modernised: 1991-1995 Basket dia.: 1524 mm – 60 Pulling speed: max. 1000 m/min. Pulling force: 6.5 T at 250 m/min. Capacity: 6800 t/annum Entry tube dia.: up to 42 mm Wall thickness: up to 2.0 mm Exit tube dia.: 5 – 39 mm Wall thickness: min. 0.3 mm

Key data: 350 , 41 , 22

Manufacturer: Demag Type: Ergotech 35-115 viva Built: 2000 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm x 410 mm Tool installation height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 22 mm Lifting volume: 47.5 cc / 41 gram ps Spray pressure: 2440 bar General Engine: 7.5 kW Heating: 6.3 kW Dimensions: 3.1 m x 1.1 m x 1.6 m Weight: 1800 kg Screen text: German Additional equipment Picker Air valve: x1

DEMAG ERGOTECH- EL-EXIS E 1000/420-310 (130) Built: 2003 specifications Screw diameter [mm]: 35 Spray weight [g]: 150 Spray pressure [bar]: 1865 Closing force [kN]: 1000 Tie bar distance [mm]: 420x420 Clamping plate size [mm]: 600x600 Tool installation height min. [mm]: 200 control Control: ERGOcontrol Monitor: Yes Control cabinet: Yes Language: Yes other Power [kW]: 46.7 Engine hours [h]: 67455 Dimensions [m]: 4.6x1.5x2.1 Weight [kg]: 6500 - KNIESCHLIESSEINHEIT - CORE TRAIN - EUROMAP - AIR VALVE

Demag 250 kg crane system Payload: 250 kg Control GSA Type 4 Drive: Side: 3m Forward 2m Crane system has already been dismantled. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Demag 20 ton + 3,2 ton x 17 855 mm Kind of: overhead travelling crane Capacity: 20 ton + 3,2 ton Span: 17 855 mm Drop: 9000 mm Weight: 15 ton Numbre of riggers : double rigger

Screw compressor make MANNESMANN-DEMAG type RA-110Fabr. -No: 349008/272 built in 1996Technical specifications:Output: 11.3 m³ / min.Speed: 3000 rpm.Installed engine power: 75 kWWeight approx: 1280 kgWith- CE markused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 5 N-FMasch. -No: 4122555 with fine strokeCapacity 1str.: 1000 kgCapacity 2str.: 2000 kgLifting height: 3 mSpeed 1str.: 8/2 m / mmSpeed 2str.: 4/1 m / mmWith- in 1str. execution- Chain basket:used, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 5 NMachine -No: 730966, built in 1970Capacity: 500 kgLifting height: 3 mSpeed: 10 m / min.With- 1-levelused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 1 NFFabr. -No: 1471196 built in 1970Capacity: 250 kgLifting height: 3.0 mLifting speed: 8.0 / 4.0 m / min.Fine lifting speed: 2.0 / 1.0 m / min.Motor power: 0.2 / 0.05 kWWith- fine lift- 2-strandedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 5 NFabr. -No: 1730966 built in 1970Technical specifications:Load capacity: 500 kgLifting height: 3000 mmMain lifting speed: 10 m / min.With- chain case- single fall 500 kg- control cables- Manual landing gearused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make DEMAG type PK 1 NFManufacture -No: 5550183Technical specifications:Load capacity: 125 kgChain Length: 3.0mLifting speed: 8.0 m/min.Fine lifting speed: 2.0 m/min.With- Chain hoist manually 1-strand- control cableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sumitomo Demag injection molding machine Systec multi 210/580-430h/200r 2021 Wittmann Robot W822 Z:2500/Y:1400/X:550 2021

: DEMAG : . : 20 Euro . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BEING NEGOTIATED Sumitomo Demag 280 ton Systec SP 280/630-840 year of manufacture 2014 280 Ton Clamp 2800kn Tie Bar Dist 630 Injection unit 840 Made in Schwaig, Germany 400v 50hz Exworks South America

Ref. no.: 17518 Producer: DEMAG Year of construction: 1998 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Distance between tie bars: 320 x 320 mm Mould height min.: 210 mm Mould height max.: 610 mm Platen size (h x v): 540 x 530 mm Injection unit Screw diameter: 22 mm Injection volume: 42 cm³ Shot weight: 37 g Injection pressure: 2591 bar Measurements and weight Dimensions: 3,6 x 1,5 x 1,8 m Machine weight: 3100 kg

Key data: 18 , 8 , 3

Screw compressor Mannesmann DEMAG SE 30 S 3 m³/min, 8 bar, 18.5 kW Good condition Test run carried out Ready for action

Key data: 3500 , 60

warehouse no.: 503071 manufacturer: DEMAG type: Concept 350-710-1450 controller: NC4 year of construction: 2003 operation hours: 62370 h clamping force: 3500 kN distance between tie-bars h x v: 710 x 630 mm size of mould plates h x v: 1040 x 950 mm min. mould height: 330 mm max. mould height: 830 mm max. open daylight: 1385 mm opening stroke: 675 mm screw diameter: 60 mm swept volume: 763 ccm injection pressure: 1905 bar equipment included: 16x control for hotrunner screen text german CEE-socket 16A core pulling hydraulically 1x air valve moveable WAP machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 interface EUROMAP 63 Schuko-socket 10A measures of machine l x w x h: 6.5m x 2m x 2.3m total weight: 15300KG

warehouse no.: 503174 manufacturer: DEMAG type: ERGOtech 1000-420-310 controller: NC 4 year of construction: 2002 clamping force: 1000 kN distance between tie-bars h x v: 420 x 420 mm size of mould plates h x v: 600 x 600 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 35 mm swept volume: 168 ccm injection pressure: 2020 bar equipment included screen text german CEE-socket 16A complact flash drive core pulling hydraulically 1x air valve 1x machine incl. Handling machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A Schuko-socket 10A measures of machine l x w x h: 4.2m x 1.4m x 1.8m total weight: 3700KG technical data robot-system handling type: Linear manufacture: Wittmann controller: W7 ...

E-chain hoist, electric hoist, crane DEMAG type DKES 2-200 K V2 DI with Dematik BUS control via crane system control Fabr. No.61456646 Year of construction 2003 Payload: 200 kg Hook travel: 4.0 meters Main lifting speed: 14.0 / 19.2 m/min. Fine lifting speed: 0.20 m/min. Chain size 4.2 x 12.2 mm 1 load line = 200 kg - with control logic DKES2/5 500V - without crane operation - Dematik BUS control via crane system control - without roller chassis Mains connection: 400 volts, 50 Hz Rated power: 750 W Rated current: 2.4 A good condition; used

Suspended crane runway crane system DEMAG type KBK 1 Year of construction approx. 2000 Monorail overhead conveyor with monorail Crane bridge Light crane system made of KBK modular system profiles Load capacity: 125 kg Span: 5 meters Distance longitudinal rails: 4.1 meters Longitudinal member length complete: 12 meters Girder profile cross beam = KBK1 Carrier profile longitudinal track = KBK1 Consisting of: 29 meters system profile KBK-1 (4x 6000 mm + 1x 5000 mm) 1 piece carriage for the Crane suspension 2 pieces Double carriage for the longitudinal rails 10 pieces screw claws for crane suspension or ceiling mounting (without carrier clamps) 6 pieces End cover suitable for the track KBK1; used

E-chain hoist, electric hoist, crane DEMAG type DKUN 1-100 K V1 F4 Fabr. Ref.61801899 Year of construction 1997 Payload 100kg Hook travel 3 meters Main lifting speed 8 m/min. Fine lifting speed 2 m/min. Chain size 3.6 x 10.6 mm cable length control bottle approx. 1.7 meters Mains connection: 400 volts, 50 Hz 1 load line = 100 kg net weight 16.5 kg good condition; used

E-chain hoist crane DEMAG type PM 12LF Manulift Fabr. No. 5877813 Year of construction 1990 Payload 125 kg Hook travel 3.5 meters Lifting speed 12 m/min. Fine lifting speed 2 m/min. Motor power 0,32 / 0,05 kW Mains connection 400 Volt, 50 Hz 1 load line = 125 kg Manulift hand control directly on the crane hook Good condition; used

Ref. no.: 18138 Producer: DEMAG Year of construction: 2006 Clamping unit Clamping force: 80 ton Opening stroke: 850 mm Distance between tie bars: 370 X 3370 mm Mould height min.: 200 mm Mould height max.: 510 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 22 mm Injection volume: 37 cm³ Shot weight: 32 g Injection pressure: 2580 bar Measurements and weight Dimensions: 4,50 X 1,28 X 1,95 m Machine weight: 4750 kg

Demag 5 ton x 17 000 mm Kind of: overhead travelling crane Capacity: 5 ton Span: 17 000 mm Numbre of riggers : double girder

Demag Traverse Total length: 5.5 meters Gauge: 5.0 Meter Stroke: 250 KG

Injection moulding machine Demag Ergotech 5000-5200 Parameters: Production year: 2001 Control: NC10 Injection unit: .../5200 Screw diameter: 95 mm Specific injection pressure: 1550 bar Injection volume: 2835 ccm Injection weight: 2550 g Tool closure system: 5000/... Clamping force: 500 t Tool plate dimensions: 1300 x 1200 mm Distance between columns: 900 x 800 mm Tool height: 400...880 mm Opening distance: 810 mm Maximum plate distance: 1690 mm Ejector stroke: 230 mm General data: Dimensions (m) LxWxH: 9,40 x 2,30 x 2,50 m Instrumentation: 6 x pneumatic cascade 2 x Hydraulic Core

We are a company dealing with international trade in used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Injection moulding machine Demag Ergotech 25/280-35 Parameters: Production year: 2006 Injection unit: .../35 Screw diameter: 18 mm Specific injection pressure: 2099 bar Injection weight: 20 g Pump motor power: 7.5 kW Cylinder heating band power: 5 kW Tool closure system: 250/... Clamping force: 25 t Tool plate dimensions: 460 x 450 mm Distance between columns: 280 x 280 mm Ejector stroke: 100 mm General data: Weight: 2520 kg Dimensions (m) LxWxH: 3,3 x 1,2 x 2,0 m Net price given. We invite you to our other auctions where you will find other peripherals and injection machines. europnet.eu

DEMAG ET 650/5200 - non-functional broken column Robot - broken year of manufacture: 1997 v. no. 8631032 auger: 95 mm weight: 2835 cm3 closing force: 650 t clamping plates: 1450/1350 between columns: 1000/900

Demag Ergotech 110/470-430 machine The machine, connected, is working. In good condition Year of production: 1999 For sale immediately. Possibility to view and start the machine. Last machine inspection: 09/2022

Demag Extra 1500-600 injection molding machine Clamping force 150 tons Machine in very good condition.

Manufacturer Demag Model D 1375/8000 Year 1996 capacity 1375 Ton Machine is in good condition

Demag Extra 200-840 Injection moulding machine The Machine is in perfect condition

Demag P-hoist width: 4808 mm height of main beam: 950 mm height of hoist on top of beam: 1010 mm Kind of: overhead travelling crane Capacity: 7,5 ton Span: 24 meter Drop: 11 meter Tackle speed: 1,5 / 15 m/min Rotationspeed: 6,3 / 25 m/min Displacementspeed: 10 / 40 m/min Weight: 11 ton Numbre of riggers : double girder

Demag DH-hoist with digital scales width: 6008 mm height of main beam: 1500 mm height of hoist on top of beam: 1210 mm Kind of: overhead travelling crane Capacity: 32 ton Span: 25 meter Drop: 8,5 meter Tackle speed: 6,3 / 12,6 m/min Rotationspeed: 10 / 34 m/min Displacementspeed: 10 / 100 m/min Numbre of riggers : double girder

Demag DH-hoist width: 4846 mm height of main beam: 1200 mm height of hoist on top of beam: 1010 mm Kind of: overhead travelling crane Capacity: 15 ton Span: 25 900 mm Drop: 14,5 meter Tackle speed: 0,75 / 7,5 m/min Rotationspeed: 6,3 / 25 m/min Displacementspeed: 10 / 40 m/min Weight: 15,4 ton Numbre of riggers : double girder

Demag DH-hoist width: 3792 mm height of hoist op top of beam: 1550 mm Kind of: overhead travelling crane Capacity: 16 ton Span: 24 meter Drop: 12 meter Tackle speed: 1 / 10 m/min Rotationspeed: 6,3 / 25 m/min Displacementspeed: 10 / 40 m/min Weight: 17,5 ton Numbre of riggers : double girder

Demag P-hoist width: 4566 mm height of main beam: 875 mm Kind of: overhead travelling crane Capacity: 3,2 ton Span: 24 meter Drop: 11 meter Tackle speed: 1,2 / 12 m/min Rotationspeed: 5 / 20 m/min Displacementspeed: 10 / 40 m/min Weight: 6,5 ton Numbre of riggers : single rigger

Demag 5 ton x 16 900 mm Kind of: overhead travelling crane Capacity: 5 ton Span: 16 900 mm Numbre of riggers : double girder

Electric chain hoist, electric hoist, crane DEMAG type DKUN 2-250 K V1 F4 Factory No. 61113041 Year of construction 2000 Load capacity 250 kg Hook travel 3.3 meters Main lifting speed 8 m/min. Fine lifting speed 2 m/min. Chain size 4.2 x 12.2 mm Cable length Control bottle approx. 1.7 meters Mains connection 400 volts, 50 Hz 1 load string = 250 kg - emergency stop Weight 31 kg good condition; used

E-chain hoist, electric hoist, crane DEMAG type PK 2N Factory no. Year of construction 1982 Load capacity: 500 kg Hook travel 2.2 meters Lifting speed 5 m/min. Cable length control bottle approx. 3.5 meters Mains connection 400 volts, 50 Hz. - 2 load trains = 500 kg Weight: 32 kg good condition; used

clamping force: 800 kN injection volume: 106 / 42 cm³ screw diameter: 30 / 22 mm platen size: 600 x 600 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 30 mm - injection volume: 106 cm³ - weight: 94 g injection unit 2: - Screw diameter: 22 mm - injection volume: 42 cm³ - weight: 37 g Clamping unit: - Clamping force: 800 kN - Centring: 125 mm - Platen size: 600 x 600 mm - Mould size: 420 x 420 mm - Mould thickness min.: 250 mm - Mould thickness max.: 590 mm - Voltage: 3x 400V, 50Hz, N, PE - Total power: 42 kW - Dimensions L/W/H: approx. 4,300 x 1,400 x 3,600 mm - Weight approx.: 5,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage. The data for th ...