129,086 used machines on RESALE, but how to find them? Machine Search
Boom suitable for Volvo ECR 88 (year of construction 2005, s/n: 10296)
Extension arm suitable for 6-10t mini excavator / extension arm to fit 6-10t excavator, length 2 m, weight 230 kg, rear mount 2x fixed bolted, front mount with various quick couplers possible (on request)
NEW - year of construction 2020, PTO-drive, 2/4 fold splitting wedge, 4 m conveyor belt, with log lifter, 10 t splitting force, max. cutting diameter 36 cm, adjustable cutting length 20 - 55 cm, 2 splitting speeds, own weight 675 kg, Hp / kw: 18 hp / 14 kW, Year of construction: 2020
Handle suitable for Volvo ECR 88, part number: , suitable for s/n: 10001 - 10617
Year of manufacture 2009, 138 HP Deutz engine, 4.1 t load capacity, with additional hydraulics, hydraulic quick coupler, all-wheel steering/dog trailer, compressed air brake system, height-adjustable trailer coupling, tipping hydraulics, Austrian registration
Poclain travel motor, number: 05816293, code B2433OU, suitable for Bomag rollers
NEW, 300 cm working width, approx. 2.20 m³ capacity, 800 kg weight, with JCB Q fit attachment
NEW, Genie / Terex adapter with Euro mount, 140 kg dead weight
Spoon set suitable for Lehnhoff SW01/MS01 with Symlock holder, - 100cm sloping bucket/swivel bucket - 74l volume - 90kg, - 40cm backhoe bucket with 3 teeth (removable) - 46l volume - 38kg, - 20cm backhoe bucket with 2 teeth (removable) - 20l volume - 28kg, Suitable for 1.5-2.5t excavators
Spoon set suitable for Lehnhoff SW01/MS01 with Symlock holder, - 100cm slope bucket/swivel bucket -74l volume -90kg, - 30cm backhoe bucket with 3 teeth (removable) - 33l volume -32kg, - 50cm backhoe bucket with 2 teeth (removable) - 59l volume - 42kg, Suitable for 1.5-2.5t excavators
BIG suitable for Volvo BM / Liebherr 514, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ã 61.5 mm, Bottom bolt: Ã 51 mm, Bolt center-to-center distance: 617 mm, Further recordings also available!
BIG suitable for Volvo BM / Liebherr 514, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ã 61.5 mm, Bottom bolt: Ã 51 mm, Bolt center-to-center distance: 617 mm, Further recordings also available!
BIG suitable for Merlo ZM2 and Heavy Duty attachment, - Year of construction: 2025, - made of S355 steel, - HD version, Dimensions:, Top bolt: Ã 50 mm
BIG adapter JCB Q-Fit suitable for Euro mount, NEW, - Year of construction: 2025, - Own weight: 160 kg
Earth drill suitable for 8 - 22 t excavators
Volvo 4in1 folding shovel, suitable for Volvo L25, 180cm working width
NEW, 2,40 m working width, 2.0 m³ capacity, 658 kg weight, suitable for Bobcat telescopic handler attachment
NEW, 300 cm working width, approx. 2.20 m³ capacity, 800 kg weight, with JCB Q fit attachment
285 cm working width, suitable for Doosan, Daewoo wheel loaders
NEW, width 200 cm, 396 kg net weight, 0.98 m³ capacity, with Komatsu mount
Gasket set suitable for Hammer HM 200-250, also other gasket sets such as for HM300 / HM 1300 / HM 150 / HM250 available!
NEW, suitable for telescopic loader & Unimog wheel loader, 1 piece à ⬠400,-
NEW, Weidemann adapter suitable for Euro mounting, 150 kg net weight
NEW, Year of manufacture 2024, Suitable for 7-14t excavators
Pewag Uninet snow chains, like new!, Ideal for agricultural and construction machinery, the optimal self-cleaning effect ensures smooth running and a comfortable ride!, 8.2mm link thickness, suitable for, 405/70R18, 360/70R20 Continental/Mitas AC70T, 360/70R20 Pirelli/Trelleborg TM700, 375/70R20
New slewing ring suitable for Volvo ECR88 mini excavator
ORT RP30 MS 2-roll 30 tons, thread rolling, knurling, small gears, 2009 = YOM, Electronic overhaul and electronic retrofit with Siemens PLC (2025) The machine is visible working in our warehouse in Gussago BS. Possibility of proof M i m u Machine Tools, Power (Ton): 30, Number of rollers: 2, PLC: Yes
CHURCHILL PH3615 gear hobbing machine Max workpiece diameter 914 mm Max diametral/ pitch- 8 Module, 3 D.P. Horizontal centre distance:-63,5- 559 mm Max horizontal travel 469 mm Height hob centre to worktable: 127- 508 mm Max travel of vertical feed 381 mm Max height worktable to tailstock centre768 mm Table diameter 762 mm Table hole (diameter x depth) 89 x 381 mm Hob dia x length 178 x 203 mm Max travel of hob slide 127 mm Diameter of hob arbor 32 mm Hob spindle speeds, infinitely variable 50 – 200 rpm Vertical feeds 0.38 – 5 mm Main drive motor 10 HP Floor area 3960 x 2130 x 2300 mm Weight 11,500 kg Extended set of change gears Complete documentation Operational variable speed drives for main motor and feed drives
Type: Pressant Uni 1N Year of Make: 2009 Capacity: max. 25,000 W/H Hours: >8500 Scope of delivery: Pallet transport at the infeed Collection table at the outlet Intermediate layer lifter Intermediate Layer Magazine Pallet magazine Control Siemens S7 Protective cladding Switchboard
Pressta Eisele Panto 300 copy milling machine - Very good condition - With frequency converter and HF motors - With stop system
Key data: 3500 mm, 20
HÖFLER Porta 3500 CNC Gear Grinder – As Is” with Limited Use We are offering a unique opportunity to acquire a HÖFLER Porta 3500 CNC Spur/Helical, Internal/External Gear Grinding Machine – a rare and powerful machine with low hours, available in As Is” condition at a negotiable price. Machine Overview: • Make/Model: HÖFLER Porta 3500 CNC • Year New: 2007 • Installed: 2010 • Total Hours: Only 6,800 since installation • Design: Later-generation traveling gantry • Condition: Structurally and mechanically sound, but currently not operational due to uninstalled hydraulic drive motor (refurbished and included). • A full assembly report detailing remaining work can be provided upon request. Key Specs: • Max external grinding diameter: 137.8” (3500mm) • Max internal grinding diameter: 31.5” (800.1mm) • Max tooth profile height: 3.15 ...
Rötchenanlage: Kövy KM-S Year of Make: 2012 Head Machine Fortuna: Primus Pro V11.0 Year of Make: 2021 Kövy Dimensions: approx. 4900 × 1080 × 2530 mm Capacity: approx. 5,280 dough pieces /h Proofer capacity: 860 dough pieces Fortuna Hourly output: max.ca. 5,000 dough pieces /h Weight range: 40 -100 gr. Weight: approx. 1,100 kg Length of band top: 1,200 mm Length with strap: 1,705 mm Width: 1,000 mm Height: 1,520 mm Year of construction Fortuna: 2021 Year of construction Kövy: 2012
Locking block for die casting machine GDK2500 by Frech, PADS1117.400, Parker, overhauled-as good as new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Refurbished! The locking block was overhauled by Parker, is in the original packaging and is in an immediately usable, top condition. The locking block can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Locking block, Parker, PADS1117.400, Suitable for the GDK 2500 machines from Frech/Müller Weingarten The block was still delivered to machines from Müller Weingarten and has SAE connections. Art. 937009 Weight 650kg Attention: We offer various columns, adjustment nuts, tie bar expansion nuts and 2 piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D ...
max. wheel diameter: 600 mm gear width: 500 mm max. module: 15 min. module: 1 total power requirement: 2 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2x1,5x2 m The rounding of the teeth is obtained by coordinating alternative movement of the cutter and rotary movement of the piece. The alternative movement of the cutter is obtained by rotating a cam, shaped in order to obtain radius or cusp rounding. A series of 4 cams allows to work modululus from 1 and 16 included. An regulation device allows change the modulus between the minimum and maximum value of every cam. The rotation of the piece is controlled by a three-stage gear wheel which forms the dividing system. The piece lock and the movement of the rapid entry of the cutter to the piece is controlled by pneumatic servo devices. The practicality and rapidity of the equipment, as well as the wide range of profiles av ...
Manufacturer: SCHMID Model: PremiumLine Year of Manufacture: 2010 Power Requirements : 380 V 93.0 A 50 Hz 3 Phase Exterior Dimensions : - Width 11,500.000 in (29,210.0 cm) - Depth 184.000 in (467.4 cm) - Height 151.000 in (383.5 cm) Accessories: Various spare parts: pumps, brackets, angle pieces for piping, pipes, screws, washers, sensory Complete SCHMID DES-PremiumLine etching system, available from inlet to outlet. The system consists of 14 individual modules, including piping, wastewater buffer tanks, pumps, valves, sensors, control cabinet, PC, and spare parts. The configuration includes two wastewater buffers, one dedicated to the development and stripping modules, and another for the etching modules. Fully equipped and designed for high-precision PCB or semiconductor processing applications. Find more here - / Contact us at -
x-axis: 4000 mm y-axis: 3200 mm z-axis: 1200 mm distance between columns: 2700 mm spindle motor: 50 / 65 kW spindle turning speed range: 15000 U/min distance spindle nose and table: 200 - 1400 mm rapid traverse: m/min table-size: 4020 x 2400 mm workpiece weight: 15 t Control: Heidenhain TNC 640 total power requirement: - kW weight of the machine ca.: 44 t dimensions of the machine ca.: - m Machine equipped with: X, Y, Z, B, C five axes simultaneous movement control - CNC control Heidenhain TNC 640 - 40-position tool changer (HSK-A100) - 2-axis milling head TCH-19F -- B- & C-Axis - X,Y,Z-axis linear scales - IKZ 20bar - Tool off-set - Oil skimmer - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
S. No.: G366J310535 Counter: Color Total 2’878’974 / B & W Total: 2’961’001 Format/Sizes: Maximum size: 330 x 660 mm Maximum standard sheet: 330 x 488 mm Minimum size: 98 x 146 mm Equipment / Additional information: With Fiery PRODUCTIVITY/PRINT SPEED • Average Monthly Print Volume: Up to 80,000 • Duty Cycle: 750,000 • 80 ppm (8.5 x 11"/A4), 52–350 gsm with Performance Package • 80 ppm (8.5 x 11"/A4), 52–220 gsm • 60 ppm (8.5 x 11"/A4), 221–350 gsm • 44 ppm (11 x 17"/A3), 52–350 gsm with Performance Package • 44 ppm (11 x 17"/A3), 52–220 gsm • 32 ppm (11 x 17"/A3), 221–350 gsm IMAGE QUALITY • 2400 x 2400 dpi VCSEL ROS for sharpness, detailed shadows and bright highlights • 1200 x 1200 x 10 RIP rendering without down sampling for Ultra HD performance
Used Arol M-KAMMA PKV automatic capping machine for overcap caps (caps for pressure caps on bottles with 1881 thread). YEAR OF MANUFACTURE: 2013 NUMBER OF CAPPING HEADS: 24 DIVISION WHEEL DIAMETER: 720 mm CAPACITY: 45,000/h The set includes: octabin tipper, pneumatic transport and capping machine. Documentation in Polish and English.
Height=6 m, Overall length= 21 m, Overall width= 3 m, Producer: Fritsch Condition: RENOVATED Made in Germany Description: This Fritsch Line includes: Fritsch calibrator type KK 88-700-L Fritsch infeed belt with flour duster Fritsch CTR cutting and turning unit type CTR-700-30-L Fritsch unfilled coiler type CRH-120-400-L 2000 year
Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Net weight= 820 kg, Producer: Werner & Pfleiderer condition: Refurbished Made in Germany Description Dough divider Parta U2 is designed for processing wheat flour and kneading up to 50% of the mass of rye flour method of careful processing of the dough two dividing chamber low oil consumption weight range 150-900 g or 80-750 g hopper volume 120 l dimensions with hopper 1127x750x1612 mm power 1.1 kW renovated
Height=0.82 m, Overall length= 1.01 m, Overall width= 1.12 m, dosing volume: 30-300 ml In store Made in Italy Description The pneumatic dispenser is designed for dispensing liquid dough and creams in confectionery bunker – approx. 30 l dosing nozzle – Ø 22 mm the machine is completely made of stainless steel renovated
Swing diameter over bed/cross slide: 700mm/430mm, turning length: 4000mm, spindle bore: 80mm, speed: 1500rpm, bed width: approx. 550mm. Machine dimensions X/Y/Z: approx. 6300mm/1350mm/2000mm, weight: approx. 5700kg. An on-site inspection is possible.
Continuously motion folding box cartoner with automatic blister infeed. Mechanical output up to max. 300 cycles/min. TThe unit is fitted with: blister infeed, GUK Leaflet folder, coding device, Reject station, vacuum pump. PLC: SIEMENS Type: Simatic S7-300
Clamping Force: 350 ton // Shot Weight (Max): 694 g
maximum number of results exceeded
please refine your search
