demag p used for sale

- Baking Plate Amount: 73 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: approx. 4,000 pieces / Hour - Cone Size: max. 230 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Transport Unit with Wafer Turner - incl. Cooling Tower - incl. Packing Conveyor approx. available in July 2025

Packaging machine Minipack Torre Praktika 56 MPE; good condition; Format 600x400mm; Max. Product height 240mm; Program memory; Foil needle rollers; meter reading only 58,000; New belts for the infeed and outfeed conveyors are included; Roller run-out. Packing machine Minipack Torre Praktika 56 MPE; good condition; size 600x400mm; max.package hight 240mm; program memory; foil perforating unit; counter only 58,000; new belts for infeed and outfeed; Outfeed Roller Band.

This material filler is equipped with a 1 kW electric motor. It can suck 2 kinds of materials into its large tank. The mounted controller can also regulate the ratio of materials. There are several of them. Other fillers, dyes and other machines are also for sale. Please see my other ads.

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1500 Year of Make: 2009 specifications: Conveying width: approx. 1,500 mm Center distance: approx. 9,625 mm Belt course: approx. 3,000 mm horizontally running underfloor, then rising below 30° over a length of approx. 5,875 mm, sloping below 20° on the remaining length and conveying into the press Conveyor belt drive power: 3.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 777 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE pre-assembled as far as possible, consisting of: - Strip frame in solidly welded profile steel and sheet steel edge construction, - Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads, - Conveyor belt with 20 mm high T-studs on the sides to seal the belt stringers,  ...

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1750 Year of Make: 2004 specifications: Conveying width: approx. 1,500 mm Belt run: approx. 4,300 mm horizontally underfloor, then increasing over a length of approx. 6,300 mm, Conveyor belt drive power: 4.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 1,027 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE pre-assembled as far as possible, consisting of: - Strip frame in solidly welded profile steel and sheet steel edge construction, - Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads, - Conveyor belt with 20 mm high T-studs on the sides to seal the belt stringers, - Belt routing in a neutral zone to avoid stretching tensions, - Chain type M-80 with case-hardened bushings, bolts and roller ...

Used Chain Conveyor Belt Manufacturer: PAAL Type: KEM 1500 Year of Make: 2005 specifications: Conveying width: approx. 1,500 mm Belt run: approx. 3,100 mm horizontally underfloor, then rising below 28° over a length of approx. 6,000 mm, Descending below 10° on the remaining length and conveying into the press Conveyor belt speed: 0.27 m/sec. Conveyor belt drive power: 4.0 kW Sidewall heights - in the horizontal part: 527 mm - in the climbing section: 777 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE pre-assembled as far as possible, consisting of: - Strip frame in solidly welded profile steel and sheet steel edge construction, - Additional sliding guides below the belt support profiles in the horizontal and riser sections to absorb heavy loads, - Conveyor belt (quality: EP 200/2 2:1) with lateral 20 mm high T-studs for sealing the be ...

Key data: 1059 KW, 1500 1/min

Mitsubishi S16N - PTA Diesel Generator 1059 kW, low running hours Mitsubishi S16N - PTA Diesel Generator Description: The Mitsubishi S16N - PTA is a 1059 kW diesel generator designed for industrial use. It provides reliable power for large applications, powered by a Mitsubishi S16N engine. This model is built for durability and efficiency, offering long-term performance with minimal maintenance. Technical Specifications: Model: S16N - PTA Year: 1989 Power Output: 1059 kW / 1320 kVA Engine Type: Mitsubishi S16N (16-cylinder, naturally aspirated) Fuel Type: Diesel Speed: 1500 RPM Voltage: 400/230 V Frequency: 50 Hz Cooling System: Water-cooled Alternator: Synchronous, brushless Fuel Consumption: 210-220 g/kWh (approx.) Starting System: 24V electric start Feel free to contact if you require any further information, contact us at: Info@ukpowergeneratorsl ...

line for croisants

Platen press / Diecutter - clamp shell die cutter Make SR-Pack Model ML1500 Year 2003 Size 1000 x 1500 mm Details 2 chases, timer dwelling operated, pneumatic clutch, central lubrication Available Direct

Bottle washing machine Pac CB 12-0.5-V-7 L II Year of Build 1997 6,000 Fl7H

Jogger Make Polar Model R-2 Year 1999 Max size 72 x 87 cm Details automatic jogger regulated vibration regulated jogging angle stainless steel Airbed Requirers compressed air for the side tables to open/close Available Direct

Aircooled chiller/Heat pump EMICON PAE 361 KA 22 kW/25 kW Cooling capacity: 22 kW / 6.26 tons (12/7 — 35°C) Heating capacity: 25 kW / 7.11 tons (40/45 —7°C) Year of manufacture: 2018 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Copeland ZH92K4E-TWD-524 (scroll) Type of refrigerant: R134A Number of fans: 2 pcs. EBMPAPST A6E630-AN01-01 Dimensions: 2.05x0.86x1.66 m. Weight: 433 kg. Condition: Outlet (Transportation damage present)

SPECIFICATIONS: Length of pre-planer machine inlet: 2200 mm Machinable width: 230 mm Machinable height: 120 mm Spindle: Ø 40 mm Number of Spindles: 5 Cardan shaft drive Speed: 8000 rpm Voltage: 380 V Spindle configuration: 1: Bottom (5.5 kW) 2: Right (5.5 kW) equipped with PowerLock HSK 3: Left (5.5 kW) equipped with PowerLock HSK and electronic control 4: Top (5.5 kW) with PowerLock HSK and electronic control 5: Bottom (5.5 kW) equipped with PowerLock HSK EQUIPMENT: Complete with milling

Swivel spindle milling machine Brand: Panhans type 245 10 New machine Technical data: Engine power: 5.5 kW / 7.5 hp table size: 1100 x 760 mm table height: 870 mm clamping height: 140 mm height adjustment: 140 mm speed: 3000 / 4500 / 6000 / 9000 rpm space requirement: 1145 x 1180 mm Net weight: approx. 800 Table milling machine with double-sided swiveling fixed milling spindle for the swiveling range from -5° to +45,5°. handwheel adjustment with analog dial gauges Belt quick tensioning device Electr. speed indicator Left and right rotation cutter quick clamping device fine planed cast iron table with rigid frame support Milling stop 215 total adjustment via handwheel incl. multiplex stop plates mechanical motor brake milling protection and pressure device GAMMA V 1629 curved milling fence 1639 Tapoa

CNC drilling line Brand: Alberti Type: Syncro-Plus New machine Line with 5 controlled axes for vertical drilling from below. Options also allow grooving, milling and insertion of fittings. This Syncro line can be very well combined with the BMF series of Alberti. Autom. or manual loading with longitudinal workpiece transport Monolithic frame in welded strong steel Independent control of all axes with drilling cycle optimization 5 independet asex X1 Feed rate belt conveyor, 100 m/min X2 Control of reference stops, 55 m/min. X3 Workpiece transport control in relation to the workpiece width, 15 m/min. Y Drill head control, 45 m/min Z Machining depth control, 10 m/min Remark: Max. Workpiece dimensions: 3000x900x30mm Min. workpiece dimensions: 300x130x12mm Geometry of workpieces: Length > Width / Length = Width / Length < 20% Width. Machining head: 1 vertical  ...

New longitudinal veneer splicer Brand: CASATI Type: LINEA 1250 Technical details: Arm length 1.250 mm Veneer thickness 0,4 - 4 mm Min. veneer length 350 mm Min. veneer width 45 mm Glue for pre-gluing: Urea and PVA Glue for integrated gluing: Urea Feed speed 10 - 40 m/min. Heating area length 1.250 mm Total connected load 7,4 kW Power consumtion approx. 6 kw Compressed air consumption 5 Nl/min Compressed air pressure 6 - 8 bar This machine permits the longitudinal splicing of veneer sheets by applying glue on their edge. Immediately afterwards the veneer will be passing through a heated zone in order to activate the glue reaction: the glue will be hardening thus bonding the veneer sheets. The integrated glueing device allows the joining by one only process. Its also possible to bond pre-glued veneer sheets Option for an extra charge: Cooling device for the glue po ...

Several milling motors Make: Perske - in different versions available from stock (0,2 till 8 kW) Price on request (depending on version) Please let us know which specification you are looking for: - power - shaft-type - torque - type - voltage

Sanding unit Make: HOMAG Type: PS10

Oscillating buffing unit HOMAG

description: 180 ° curve conveyor suitable for different tray formats. Belt width 800 mm Radius 1800 mm New-quality motor can be offered with the desired requirements width: 4450 mm length: 2500 mm serial number: 642-92-900 S176 Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK techni ...

Key data: 6200 mm, 1 mm

Motor scissors, 5 stop fingers, laser protection, with back gauge, Projection: 1000 mm, Colour: blue, Total power requirement: 3 kW, Insertion depth: 1000 mm, with roller shears, number of stands: 5 pieces, opening width: 200 mm, Bending angle: 145 degrees Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Machine Number: 8432

Serialization line for printing folding boxes of medicines Find more here - / Contact us at -

current capacity: 112 + Nebenleitung 63 kVA throat: . mm contact pressure capacity: . kp total power requirement: . kW weight of the machine ca.: 0,475 t dimensions of the machine ca.: . m The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Model: Quail mini Piccolo 3 Electric deck furnace with steam for 3 trays 600x400mm Stove dimensions 600x400mm / 1 x 210, 2 x 135 mm high DMS 3 control with night start Extractor hood with fan Clipboard for 3 trays 600x400 Bottom shelf for 6 trays 600x400 Connection 400V, 18.6 kW, 3 x 16A-CEE plug Dimensions: 970 x 950 x x 2130 mm, WxDxH 3/4 inch water connection Oven mobile with fixed wheels Used furnace cleaned and tested 6 months warranty + spare parts service Option: Water Reducer Maintenance contract Instruction & Commissioning We have many more ovens in stock!

ID3517 Liebherr PR731 C-L year/Year of construction 1990 15.8 t Bulldozer with blade and rear ripper, undercarriage good Bulldozer with blade and rear ripper, drive good

Repacking station for big bags or open bags. Including feed hopper with vibrating function, folding box and screw conveyor Availability: immediately Condition: in working order, well-maintained

Profilcut Tool Set Leitz Front Door as good as new Item No.: SE 220 1 50 4800-10600 Y30 ET 952141/711001 MAN

Second hand crushing mill. Hopper dimensions: - Length 1410 mm - Width 1650 mm - Height 2600 mm Technical features Model PC66120 Machine motor 90 kW (120 cv) - 1480 rpm Equipment configuration Electrical panels Hydraulic power pack Transport information Length 2700 mm Width 2600 mm Height 1800 mm Documentation Maintenance Manual Operation Manual Drawings Electrical Diagrams Condition As is Made by Tallants Navarro

tube diameter: 1/4 max. 2 Zoll wall strength: max. 3,0 mm engine: 400Volt / 1,5KW weight: 90 kg dimensions: 07 x 0,4 x 0,3 m Pipe notcher Maximum wall thickness 3.0 mm Suitable for the following pipes: 1/4, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

B&C bagging machine from 2011 in excellent working order. Machine capable of bagging; soil / fertilizer / mulch / pellets / powders / wood chips / granules / fertilizer / salt. Possibility of making bags from 5L to 80L. Maximum bagging capacity of 12 bags / minute in 40L. Bag transport conveyors provided + bag flattener. Video in operation can be send

Manufacturer: Homag KF/FL/KL 20, Type: Pneumatische Mittenunterstüzung, Year: 1996, FREITEXT1: Länge ca.16000 , FREITEXT2: Gerät kann gekürtzt werden, FREITEXT3: Pneutisch Hochklappbar, Year :1996

Manufacturer: Perske Umformer, Type: 30 DW 14/2, Hz 1: 50, Hz 2: 100, KVA: 30,

Manufacturer: Perske Umformer, Type: DA 12-2, Amper 1: 43, Hz 1: 50, Hz 2: 100,

Manufacturer: Pinomatic, Type: Pinomatic U, Year: 2000, Angular transfer: yes, Work piece width min-max mm: 1300, Roller width in mm: 1300, Dimensions L x W x H mm: 3500x5500, Year :2000

Manufacturer: Paul, Type: Sägewelle K 1500, Diameter saw spindle mm: 100, Cutting width max mm: 1500,

Manufacturer: Palettenregal, Pallet high-bay store: yes, 1stupright frame pieces Qty.: 11, 1stheight mm depth mm: 3500, 1.Transverse beam Qty.: 19, 1.Transverse beam length mm: 2500, 2.Transverse beam Qty.: 4, 2.Transverse beam length mm: 2370,

Manufacturer: Purete, Type: Transportband, Year: 2017, Control: Ja, Working length mm: 1980, Working widht mm: 1300, Total hight mm: 890, Belt width: 1300, Own controller: yes, Total hight mm: 890, Engine power kW: 0,5, Feeding speed min-max m/min: 5-20, Feeding speed continous adjustable: yes, Year :2017

Manufacturer: Perske Fräsmotor Hydrospindel, Type: Fräsmotor, Maschinennummer: KCS 72.24-2 D, aus Maschine: Homag, Amper 1: 22,5/13/20, Hz 1: 50/100/120, Power kW: 7/11, Speed rpm: 2870/5880,

Manufacturer: Purete , Type: Einzellackwalze, Year: 2017, Control: Shllin, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-80, Operating side: rechts, Working height: 890, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 5-20, kW - Leistung Transport: 0,5, Shore: ca.40, Durchmesser Auftragswalze mm: ca.240, Dosierwalze verchromt: yes, Pump system: Membrane, Carriage: yes, Electronic control board: yes, Strassenbetrieb: yes, Carriage: yes, Year :2017

Manufacturer: Purete, Type: PRT-R2113AM Doppellackwalze, Year: 2017, Control: Shillin, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 6-80, Durchlassbreite min-max mm: 1300, Operating side: rechts, Lackauftragseinheiten: 2, Vorschub Transport m/min min - max: 5-20, kW - Leistung Transport: 0,5, Conveyor: Band, Einbaulänge UV mm: 2000, Compressed air bar: 6, Year :2017

Manufacturer: Indramat Permanent Magnetmotor , Type: MAC093C-0-FS-4HC/110-A-0/WI634LX, FREETEXT1: Atlanta Getriebe, FREETEXT2: Atlanta 5844097, FREETEXT3: P 4,25, FREETEXT4: 2,9 kg, FREETEXT5: N1 1500 U/min,

Manufacturer: Purete, Type: PRT-U1113X, Year: 2019, Work piece width min-max mm: 1320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Number of lamps: 1, kW power 1 lamp: 3,78, Lampen gerade eingebaut: yes, Lampen von unten: no, od distance mm: 38,7, Conveyor lenght mm: 1.200, Drive power kW: 1,2, Rod transportation: yes, Electrical power consumption kW: 5, Required space L x W x H mm: 1.200x1.850x1.750, Year :2019

Manufacturer: Pankoke und Kochsiek, Type: BFA 03, Year: 1988, Drilling supprt from bottom: 3, Groove saw: 1x Horizontal<CRLF>1x Vertikal, Year :1988

Manufacturer: Quickwood , Type: Pro 1400 Elite, Year: 2008, Control: Pogramm , Number of units: 8, Working widht mm: 1400, Through running hight max mm: 100, Diameter of brushes: max. 350, Through running hight max mm: 100, kW output motor: 4x1,84, Feeding speed continous adjustable: yes, Weight approx. kg: 2100, Work piece width min-max mm: 1400, Min.-max. workpiece height in mm: 100, Year :2008

Manufacturer: Purete, Type: PRT-C1113, Year: Neumaschine, Control: yes, Working length mm: 5000, Working widht mm: 1300, Frequency converter: yes, Own controller: yes, Engine power kW: 0,7, Feeding speed min-max m/min: 5-25, elektronisch regelbar: yes, Feeding speed continous adjustable: yes, Working hight adjustable mm: 900 +-50, Year :Neumaschine

Manufacturer: PRT-C1113 Purete Transportband Länge 4000-1300 mm, Type: PRT-C1113 , Year: NEUMASCHINE, Working length mm: 4000, Working widht mm: 1300, Total hight mm: 900, Belt width: 1320, Frequency converter: yes, Engine power kW: 0,4, Feeding speed min-max m/min: 5-25, elektronisch regelbar: yes, Working hight adjustable mm: yes, Year :NEUMASCHINE

Manufacturer: Eckverbinder Presse pneumatisch,

Manufacturer: Homag, Type: Power FL 14/10/12/CF, Year: 2004, Control: yes, Number of milling spindles: 4, Required space L x W x H mm: 8400x4750, Year :2004

Manufacturer: Pilz Netzteil C-P8-NT- Netzteil 110/220 Volt, Type: 50-60 Hz, Model: 110 -220 Volt,