demag p used for sale

Hydraulic Cylinder PARKER CDD-3LRL24MC ND 21333-01 Series 3L Piston diameter: Ø 50,00,000,000,000 8 mm rod diameter: Ø 35 mm stroke: 550 mm pivot: Ø 35 mm New ! Dimensions: 750 x 130 x 76 mm

Hydraulic cylinder PARKER RL34M-M-11-00 NI 41020582/BC-3L p max: 70 bar Piston diameter: Ø 63.5 mm Rod diameter: Ø 35 mm stroke: 230 mm New ! Dimensions: 480 x 85 x 76 mm

Hydraulic Cylinder PARKER C-3LRL14M ND 21333-04 Series 3L Piston diameter: Ø 63.5 mm Rod diameter: Ø 25 mm stroke: 25 mm New ! Dimensions: 200 x 115 x 80 mm

Hydraulic Cylinder PARKER CH-3LRL44MC ND 21333-09 Series 3L Piston diameter: Ø 82.6 mm Rod diameter: Ø 45 mm stroke: 120 mm New ! Dimensions: 360 x 140 x 100 mm

Hydraulic Cylinder PARKER CH-3LRL44MC ND 21333-07 Series 3L Piston diameter: Ø 82.6 mm Rod diameter: Ø 45 mm stroke: 20 mm New ! Dimensions: 240 x 140 x 100 mm

Hydraulic Cylinder PARKER CF-3LRS14MC NV 65225-06 Series 3L Piston diameter: Ø 38.1 mm Rod diameter: Ø 16 mm stroke: 560 mm New ! Dimensions: 725 x 60 x 55 mm

Hydraulic Cylinder PARKER CBC3LR2L24M NJ41058831 piston diameter: Ø 50.8 mm rod diameter: Ø 35 mm stroke: 600 mm max. 70 bar New ! Dimensions: 815 x 65 x 65 mm

Hydraulic Cylinder PARKER CH-3LRL34MC ND 21333-03 Series 3L Piston diameter: Ø 50.8 mm Rod diameter: Ø 25 mm stroke: 700 mm New ! Dimensions: 870 x 105 x 65 mm

Manufacturer: Paul Year of Manufacture: 2012 Type of Machine : Resaw Circular Saw Upgrades and Refurbishment - 2019 -- New drive motor installed: 250 kW - 2019 -- Process flow optimisation carried out Find more here - / Contact us at -

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Throttle valve, hydraulic valve PARKER 9N600S-11EJ 345 bar New ! Dimensions: 65 x 25 x 70 mm

Hydraulic Cylinder PARKER NE 40763-01 ( NE40763-01 ) J-3LRL24MC Piston diameter: Ø 38.1 mm Rod diameter: Ø 25 mm stroke: 200 mm pmax: 100 bar New !br / Dimensions: 375 x 87 x 62 mm

Fitting Set, Straight Fitting, Stainless Steel Pressfittings PARKER 8SC8-316 Pipe Diameter(Outside): 1/2 Fitting set consists of 10 fittings ! stainless steel. New ! Dimensions(single fitting): 52 x 26 x 23 mm Dimensions(packing): 95 x 85 x 55 mm

Fitting Set, Straight Fitting, Stainless Steel Press Fittings PARKER 8SC8-316 Pipe Diameter(Outside): 1/2 Fitting set consists of 3 fittings ! stainless steel. New ! Dimensions(Single Fitting): 52 x 26 x 23 mm Dimensions(Packing): 95 x 85 x 55 mm

Screw Connection Set, Straight Cutting Ring Fitting, Screw Fitting PARKER 4MSC4K-316 Screw-in Thread: 1/4 Pipe Diameter (Outside): Ø 6 mm Fitting set consists of 10 fittings ! stainless steel. New ! Dimensions(Single Fitting): 40 x 16 x 14mm Dimensions(Packing): 100 x 85 x 30mm

Reinforcement Sleeve Set, Reinforcement Sleeve PARKER 8 TIZ.375-SS ( 8TIZ.375-SS ) Tube Diameter(Inner): Ø 10 mm Tube Diameter(Outside): Ø 12 mm Reinforcement Sleeve Set consists of 30 sleeves ! stainless steel. New ! Dimensions(Single Sleeve): 12 x 12 x 16 mm Dimensions: 100 x 80 x 20 mm

Directional Control Valve ORSTA 25-01.1 25-23 .1 25-38.1 TGL 20705 Pn 10 bar Dimensions: 330 x 130 x 150 mm

Directional Control Valve PARKER / SCHRADER BELLOWS 29134MJ pmax: 10bar with solenoid 150 MFT 24 V Dimensions: 190 x 50 x 140 mm

Directional Control Valve ORSTA 16-01.1 16-23 .1 TGL 20705 Pn 10 bar Dimensions: 230 x 80 x 75 mm

Directional Control Valve ORSTA 16-01.1 16-23 .1 16-40.10 TGL 20705 Pn 10 bar with base plate Dimensions: 230 x 110 x 95 mm

Belt cylinder PARKER 703468 EU/3200-032-02200-0000-0010 stroke 2000 mm Dimensions: 2450 x 87 x 52 mm

Directional Control Valve ORSTA 25-01.1 TGL 20705 25-23 .1 25-38.1 ED 100 220 V AC Pn 10 bar New ! Dimensions: 330 x 115 x 150 mm

Directional Control Valve ORSTA 01.1 - TGL 20705 25-23 .1 25-38.1 ED 100 220 V AC Pn 1 MPa Dn 25 New ! Dimensions: 360 x 115 x 150 mm

directional control valve ORSTA 10.10 - TGL 20705 25-23 .1 25-38.1 ED 100 220 V AC Pn 1 MPa Dn 25 New !' Dimensions: 300 x 115 x 150 mm

turning diameter:1390 mm turning length:14000 mm weight of the machine ca.:13 t More information can be found in the Appendix.

TONGS:. - capacity:35000 kg - Gripping range:2000 mm - Tare weight:2665 kg ELECTRICAL SPECIFICATIONS:. - total power consumption:1.1 kW - mains voltage:400 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - space requirements length:2770 mm - space requirements width:1700 mm

ELECTRICAL SPECIFICATIONS:. - mains voltage:400 V - mains frequency:50 Hz

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:90 kg - Reach:2696 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1058 kg

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:90 kg - Reach:2696 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1058 kg

max. wheel diameter:40-200 mm total power requirement:31,3 kW weight of the machine ca.:4 t dimensions of the machine ca.:1,8 x 2,2 x 1,8 m

Directional Control Valve ORSTA 2,2 5 - 16.003/1 TGL 20710 16.003/1 TGL 20710 nominal diameter: 2.5 mm nominal pressure: 1.0 MPa ( 10 bar ) control voltage: 24 V DC rated current: 0.36 A New !' Dimensions ( with plug ): 75 x 42 x 80 mm

bore capacity in steel (diameter):1-13 mm The machine has a 2.2 kW spindle motor with a 2-stage gearbox for drilling and tapping. Table size is 100 x 50 cm Stroke length approx. 200 mm

max. wheel diameter:300 mm gear width:110 mm max. module:6 weight of the machine ca.:10,5 t

Infeed and outfeed chain conveyor, with tool holders, chip conveyor, hydraulic unit and air conditioning.

Indicator set PARKER PXV-F141 80342 max. 8 bar Indicator set consists of 2 indicators ! New ! Dimensions(single indicator): 75 x 35 x 30 mm Dimensions: 150 x 70 x 30 mm

Directional Control Valve ORSTA 01.1 - TGL 20705 25-23 .1 25-38.1 Pn 1 MPa Dn 25 New ! Dimensions: 330 x 105 x 90 mm

max. wheel diameter:180 mm gear width: mm max. module:4 total power requirement:14 kW weight of the machine ca.:8 t slide travel axial ( Z-axis ):300 mm work piece - max.:490-640 mm

max. wheel diameter:275 mm gear width:58 mm max. module:8 min. module:0,5 weight of the machine ca.:10 t max. number of teeth:200 min. number of teeth:5

feed pressure:13 bar total power requirement:3 kW weight of the machine ca.:0,15 t dimensions of the machine ca.:1,0 x 0,8 x 1,2 m High pressure air cooling device

turning diameter over slide rest:280 mm turning length:4000 mm total power requirement:7,8 kW weight of the machine ca.:6 t dimensions of the machine ca.:5,9 x 1,9 x 1,40 m

x-travel:100 mm y-travel:100 mm z-travel:100 mm total power requirement:0,6 kW weight of the machine ca.:130 kg dimensions of the machine ca.:1600 x 1000 x 1300 mm milling depth:0-50 mm

weight of the machine ca.:50 kg dimensions of the machine ca.:660 x 460 x 280 mm no. of flutes:3 groove width:14/24 mm surface area:570 x 460 mm

plate thickness:4 mm blade length:180 mm weight of the machine ca.:21 kg dimensions of the machine ca.:400 x 100 x 1500 mm

weight max.:ca. 30 t gear diameter:320 mm weight of the machine ca.:3 x 950 kg dimensions of the machine ca.:3 x 2020 x 870 x 1100 mm

turning diameter over bed:930 mm turning diameter over slide rest:630 mm turning length:6000 mm turning dia. in gap:1250 mm spindle bore:95 mm turning speed range:8 - 800 U/min total power requirement:25 kW dimensions of the machine ca.:9 x 2 x 1,9 m faceplate 2 steadies coolant attachment taper turning attachment

Article: Rotary transfer machine Manufacturer: Pfiffner Type: Hydromat HB-32/45 Yob: 2002 Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information.

This 4-axis SCHÜCO PBX AL was manufactured in 2008. It features a processing length of 7,200 mm and is designed for the machining of aluminum profiles, including double-bar processing and through-feed capability for longer profiles. The machine includes an automatic tool changer and clamping blocks for enhanced efficiency. If you are looking to get high-quality machining capabilities, consider the SCHÜCO PBX AL universal machining centre we have for sale. Contact us for further details.