132,774 used machines on RESALE, but how to find them? Machine Search
roll diameter: 560 mm roll length: 1500 mm rolls drilled: Peripher Nip adjustment: hyraulisch 0 total power requirement: 150 kW Condition: used, completely overhauled, with warranty Specification: rolling mill 560 x 1500 mm - used model external gearbox - motor sideways placed at the machine - roll diameter: 560 mm - roll length: 1500 mm - model: Duplocom / pluridrive - Peripherally drilled rollers for water cooling - Cardan joints between gearbox and rollers - Individual drive for the rollers, for variable friction - hydr. gap adjustment - Hydraulic unit - Tilting steel guide plates - rollers mounted on roller bearings with appropriate lubrication - rollers with new ball bearing slewing rings, make Maier, for the connection to the water circuit - One gearbox - two individual drives, each with: 2x 75 kW - 400 V - 50 Hz - two new frequency conv ...
Soehnle Professional 2790 Weighing Terminal Floor Scale 9013 The SOEHNLE 2790 display unit is very handy and also protected according to protection class IP65, which means that it can also be used in wet areas without any problems With only five buttons, the SOEHNLE 2790 digital display device is particularly easy to operate. The built-in functions are on/off, tare, clear tare, zero and print. In addition, the 2790 indicator also has a piece counting function. The SOEHNLE 2790 display unit can be operated not only with the 230 V power supply included in the scope of delivery, but also with batteries for up to 100 hours independently of the mains. The 20 mm high digital display is backlit when plugged in and is therefore particularly easy to read. In battery or battery operation, an automatic switch-off can also be set to protect the batteries and batteries. Soehnle ...
Key data: 800 mm
Under-table cross-cut saw / optimization cross-cut saw Paul Type 20 E / NC Control Maxi 0.3 Machine No. 9159582 Year of construction 10.7.92 NC control Maxi 0.3/X.3 for length and quantity input, Cutting width max. approx. 700 mm Cutting height max. approx. 150 mm Saw blade diameter 800 mm Saw motor 7.5 kW Feed motor 4 kW Hydraulic pump motor 2.2 kW Speed of the saw blade 1450 rpm. Infinitely adjustable feed of the saw blade up to 0.2 m/sec. Cutting time depending on cross-section (adjustable) 0.5 – 3 sec. Driven rollers 2 at the top and 2 at the bottom Roller diameter 106.1 mm top and bottom Adjustable roller pressure Transport speed infinitely variable from 0 – 2.3 m/sec. Shortest input length with manual feeding approx. 500 mm Shortest input length with automatic feeding approx. 1500 mm Length accuracy +- 2 mm Measurement via measuring roller in the table P ...
Air compressor Planet Air L 550 with dryer KT 700; good condition; 550L/min.; 10 bar; incl. air dryer KT 700. Compressor Plant AIr AL 550; good condition; volume 550L/min.; 10 bar; with air dryer.
; Gross weight [kg]: 1825; Engine: Perkins 1106A-70TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185
PalletFeed is a standardized solution for the fully automatic removal of components directly from full or half-full pallets. The system is adapted to customer requirements with our standard modules. It processes pallet spacing and performs pallet measurement for new pallets. The robot is guided visually, using either 2D or 3D systems to enable pure BIN picking. Finished components are inspected according to the specified program or data. The system is extremely compact and requires little space on the floor. Since it is delivered as a tested module, the installation at your site is quick and smooth. Once commissioned, the system requires minimal maintenance. The system can be combined with a variety of options, such as conveyor belts, measuring boxes, washing systems, handling stations, marking/marking systems, etc. At a glance: - Small series - Medium series - Component we ...
Combination laser punching FINN POWER LB6 Year 2003 3000x1500
machine measurements: 850 x 1.800 x 1.450 mm machine weight: 360 kg power capacity: 0,7 kW Condition: new Specification: Powder coating machine, type: EPC-30/2E The machine is designed for the powder coating of cables, hoses and profiles. - Product diameter max.: 30 mm - Product speed max.: 1,500 m/min - Powder throughput min.: 30 g/min with fine dosage - Powder throughput max.: 400 g/min per powder injector - Electrostatic: available as option - Connected load: 0.7 kW - Dimensions LxHxW: 850 x 1,800 x 1,450 mm - Weight approx.: 360 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2-dispensing edges labeler type Pagomat 6/2 L-100 Non-Stop with Videojet. label width: 100mm.
The Lutetia Type 1 sous vide churn is aimed at food professionals who require high marinade quality and production performance. Indeed, this model can process up to 400 kg of meat and brine per cycle, making it a perfect solution for medium-sized workshops. In addition, the 950 liter tank volume ensures a comfortable margin for vacuum marinating operations, while ensuring repeatability of results and consistency of processing. Thanks to its compact design (2150 × 1230 × 1730 mm) and a weight of approx. 800 kg, this churn easily fits into an existing production line. In addition, vacuum technology improves brine absorption, enhancing the texture, taste and added value of the finished product. For example, the internal components and robust workmanship ensure a longer service life, while the quick integration and simplified maintenance reduce production downtime. In addition, the L ...
Description: Type : ÖLtransformator Version : Hermetic Make : CG POWER SYSTEMS Belgium NV Year of construction : 2012 Condition : New Rated power : 3500 KVA Medium voltage : 33 KV +- 2 x 5% Low voltage : 400 V Switching group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Total weight : 7750 Kg Cqs9sygju Oil weight : 1720 kg Synth. ESTER Length : 2400 mm Width : 900 mm Height : 2250 mm + 160mm cable flag Other sizes and voltages also available from 100 KVA to 3500 kva . All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery . For further questions available Mon to Sat. 8 a.m. to 10 p.m.
The Lutetia T2 churn is a benchmark machine in the field of vacuum mixing. Designed to meet the needs of meat and food processing plants, it offers a capacity perfectly suited to medium-sized productions. This ensures an ideal balance between performance and space. Thanks to its homogeneous mixing system, the T2 Churn optimizes marination and improves the texture of the products. This is because the vacuum process promotes uniform brine penetration and reduces yield losses. In addition, it preserves the quality of the meat by limiting oxidation and improving preservation. This efficiency makes it an essential tool for manufacturers wishing to produce with regularity and consistency. In addition, its robustness and stainless steel design ensure optimal durability. Food contact surfaces meet the highest hygiene standards, simplifying cleaning and maintenance. In addition, its footpri ...
Dimensions (L/W/H): 1500x1295x1300 mm Weight: 1500 kg Total power requirement: 16,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 300 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 290 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1500x1295x1300 mm Weight: 1150 kg Total power requirement: 16,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
I sell a bus machine Prochera DSB. Year of construction 2005. 2-sided spindle fi.30 x max. 220mm. Main motor 1.1 kW. Buerste included. Weight 90 kg. Available the same.
Dimensions (L/W/H): 1350x1180x1350 mm Weight: 1200 kg Total power requirement: 12 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3450x1550x2950 mm Weight: 4500 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3000x3000x1800 mm Weight: 1000 kg Total power requirement: 10 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 4450x1550x2950 mm Weight: 4800 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 840x540x1980 mm Weight: 158 kg Total power requirement: 2,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1500x1220x1300 mm Weight: 1050 kg Total power requirement: 16,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2200x2000x1950 mm Weight: 700 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 8 kg Total power requirement: 0,9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2950x1550x2950 mm Weight: 4000 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Muller Martini Presto – Saddle Stitcher SN: 91.06986 – 400 V The Muller Martini Presto is a highly reliable and efficient saddle-stitching system designed for medium-to-high-volume production. Renowned for precision, flexibility, and user-friendly operation, it is ideal for producing magazines, catalogs, brochures, and a wide variety of stitched print products. This complete production line includes stitching, gathering, cover feeding, trimming, and product transport—perfect for high-quality book and booklet finishing. System Configuration Stitching Machine – Type 1550 A robust stitching unit engineered for consistent and accurate wire stitching performance. 4 Double Stations – Type 1551 Which make 8 Stations Four dual feeding/processing stations that ensure continuous, efficient workflow and increased production capacity. Cover Feeder – Type 1528.0417 Automated cov ...
Refurbished blower Werner & Pfleiderer RC 2 4260 RB Power 37 kw, 50 m³/min, 1270 mm water column Air intake 160 mm ø, GL 180° 115 mm ø blow-out, New bearings, V-belt new, With basic frame and vibration damper New engine installed (Solan )
PINETTE PEI Vertical compression press 1500T SMC, closing force 1500T
A used bread slicer Treif Pegasus 2602 from 1997 is currently for sale and immediately available in our warehouse in Bielefeld. Bread slicer Treif Pegasus 2602 - Bread slicer without oiling - for long loaves of bread - completely in stainless steel - with cress knife - can be driven on castors - Year of construction 1997
refined air table, autom. Flap on both sides, format 720 x 870 mm ,
Hosokawa Powderplex Sifier Mill APP 400 Crushing and sighting Drive power 37 kW Engine speed 3000 1/min Pressure shock resistant up to 10 bar-Ü additional view terrad Very good ready-to-use condition, directly from production!
The Lutetia T4 vacuum churn is an essential tool for meat processing companies looking to optimize the quality and efficiency of their processes. Thanks to its high-performance vacuum system, this churn ensures homogeneous absorption of liquids, which improves the texture and flavor of the finished products. In fact, it allows you to marinate large quantities of meat efficiently, guaranteeing consistent and high-quality results. In addition, the Lutetia Type 4 Churn stands out for its robustness and ability to meet the demands of intensive production environments. With a high mixing capacity, it is perfectly suited for large productions, while ensuring a smooth and fast work process. In addition, it can be easily integrated into different production lines, offering great flexibility in terms of managing the volumes and types of meat processed. In short, the Lutetia Type 4 Churn is ...
The Lutetia Type 5 vacuum churn is a must-have tool for food industry professionals looking to improve the quality and efficiency of their processing processes. Designed for processing large quantities of meat, this churn optimizes marinating and seasoning with its vacuum operation, ensuring even absorption of liquids and spices. This machine is equipped with a timer with variable speed drive, which allows each cycle to be customized according to specific production needs. As a result, it delivers consistent results while optimizing processing time. Thanks to its large capacity of 3800 to 4000 kg of meat and brine, the Lutetia T5 is particularly suitable for intensive production environments. Its robust, stainless steel design ensures exceptional durability and maximum hygiene, essential in food processing processes. In addition, its variable speed control allows precise control of th ...
Technical data: Number of printing units: 8 Maximum printing width: 1270 mm Maximum web width: 1320 mm Minimum web width: 300–570 mm (depending on unwind/rewind specification) Minimum repeat length: 360 mm (ARUN system: from 380 mm) Maximum repeat length: 800 mm Repeat length adjustment: steps of 0.1 mm; correction ±2% Anilox roller internal diameter: 136,989 mm Anilox roller circumference: 500 mm Sleeve length: 1350 mm Maximum mechanical speed: 500 m/min (or 400 m/min for basic unwind/rewind) Operating printing speed depends on substrate, inks, transfer, plate type, image, screen ruling, anilox volume, etc. Corona treatment unit (Ahlbrandt) Drying Gas Non-stop shafted unwind 1000 mm Non-stop shafted rewind 1000 mm Automatic viscosity control (INKSPEC) Additional drying enhancements (ECLIPSE gas burners) Infeed/outfeed extensions Automatic sleeve change systems ...
Number of printing decks 8 Max. print width 820 mm Max. material width 850 mm Min. material width 300 mm Min. print length 260 mm Air core diameter 76,510 mm Repeat steel lock 310 mm Max. print length 600 mm Printing length setting In steps of 0.1 mm; set print length max. correction +/- 2 % Anilox cylinder Inner diameter 105,158 mm Perimeter 400 mm Sleeve length 900 mm Max. mechanical speed of the machine 300 m/min Operational printing speed of the machine It depends on the type and quality of the printed material, printing inks, ink transfer, printing length, printing plates, type of the printed motive: cross lines - picture screen density, capacity of anilox cylinders, reprint of inks, varnish, etc., environment temperature and doctor blade type. OPERATION EFFICIENCY Max. mechanic speed 300 m/min FALCON - automatic setting of print registers and impressions Soph ...
The Pannkoke 7011 CeDe is a vacuum lifting system for glass and similar materials. It is designed for the safe and flexible internal transport of heavy sheets. Below you will find the key specifications. ⚙️Main technical data Type: Vacuum lifter Year of construction : 2001 Serial number : 2001/ 2184 01 Vacuum circuit: o 1-circuit system with vacuum tank, check valve, vacuum switch and vacuum gauge o Closed circuit prevents vacuum loss in the event of a power failure o Acoustic signal when there is insufficient vacuum o Vacuum generation: o Built-in low-maintenance vacuum pump (dry running) Battery-powered, with quick-change system (battery change < 1 minute) o Charger for second battery (110–230 V, 50/60 Hz, 1 phase) o Operation: o On/off directly on the device o Suction/release via remote control o Suspension: 2-fold crane suspension, rotatab ...
The scope of delivery includes: 01x Workbench,used System substructure dimensions: approx. 1,340 x 700 mm Height of top edge worktop: approx. 938 mm Worktop dimensions: approx. 1,400 x 1,000 mm Material thickness: approx. 38 mm consisting of EACH: 02 x Workbench stand, used Manufacturer: Dexion Type: P 90 Material colour: sendz. galvanized Profile dimensions: 100 mm incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 900 mm high 700 mm deep 04 x Workbench trusses, used Shelving system: Dexion Type Speedlock P90 Material colour: sendz. galvanized Box profile: 89 x 50 mm Truss Type: SLO089|2 Clear width: 1,140 mm 08 x Dexion safety pin, used Type: Speedlock P90 Material colour: sendz. galvanized Ø Head: 13.58 mm Ø pin: 5.92 mm Weight / piece: 0,018 kg Particleboard, second choice, used Thickness: 38 mm Di ...
Professional strapping machine with internal frame dimensions of approx. width 1050 x height 800 mm from a renowned manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and uncomplicated bobbin changing and threading system. -Belt width from 8 to 19 mm possible according to manufacturer specifications, 12 mm tape roller mounted. -Up to 24 strapping per minute possible. -Strap tension adjustable from 50 to 1200 N. -Manual start via hand button or stable foot switch / Alternatively automatic operation selectable (sensor in the table top). -Equipped with ergonomic casters on the table surface. -Closure type: Welding in the heating wedge method. -Automatic tape threading. machine can be moved via castors. -230 V / 50 Hz. -Documentation consisting of operating instructions, spare parts lists and circuit diagrams. The machine can be demons ...
; Gross weight [kg]: 2580; Engine: Perkins 1206-E70TTAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger, Including: sockets 63A - 32A - 16A 5P - 16A; Water Tank Volume [l]: 380
1250 MT Presezzi Brass Rod Oil Hydraulic Extrusion Press Line w/ OCN Handling System (New 2009) MANUFACTURER – PRESEZZI YEAR – 2009 SERIAL NUMBER – 2671-2009 PRESS TONNAGE – 1250 MT WORKING PRESSURE – 260 BAR BILLET DIAMETER – 145MM BILLET LENGTH MAX – 650MM MAIN CYLINDER (SINGLE ACTING) WORKING PRESSURE – 260 BAR RAM DIAMETER – 760MM POWER – 1149 MT SIDE CYLINDERS (DOUBLE ACTING) OPERATING PRESSURE – 260 BAR BORE – 160MM ROD DIAMETER – 100MM THRUST FORCE DURING EXTRUSION – 107 TON THRUST FORCE DURING RETURN – 65 TON TOTAL MAIN CYLINDER AND SIDE CYLINDER TRUST FORCE – 1256 TON CONTAINER MOVEMENT (DOUBLE ACTING) OPERATING PRESSURE – 260 BAR BORE – 160MM ROD DIAMETER – 100MM SEALING FORCE AT 300 BAR – 107 TON OPENING FORCE AT 280 BAR – 65 TON SHEAR CYLINDER (DOUBLE ACTING) OPERATING PRESSURE – 26 ...
Type: W/ARW 2200/12 Flying Splice Comm. 2011-001.1 Working width: 2200 mm Finished roll weight max. 2000 kg Finished roll diameter max. 2x 1200 mm Finished roll width min. 800 mm; max. 2200 mm Material Paper/ Foils 75 μm – 1000 μm Machine speed max. 1500 m/min Depending on the type of material and material thickness achievable Web tension: max. 1000 N Finished roll sleeves: inside 152.4 mm outside 162.4 mm - Type of cardboard sleeve, plastic - Sleeve tolerance according to DIN 6748 or 55470 Unwinding: Type ARW 2200/12 Unwinding: axisless 2 x 1200 mm; sleeve holder 6" L.W. (other dimensions with additional accessories possible) Sleeve holder: 6" L.W. (other dimensions with additional accessories possible) Pulleys: DM approx. 150 mm Brake: Generator brake with energy recirculation, control via ultrasonic sensor Path control: Edge control E&L with ultrasonic sens ...
liquid conveyors lubrication unit for 5 Tetra Pak lines, excellent condition
PROFROID QC MT 100 PK Brand:PROFROID Type:QC MT 100 PK Stock number:M21-1293 Cooling capacity:6.82 kW Application:Cooling Number of fans:2 Refrigerant:R744 (CO2) Voltage:400 Volts Motor power:2x 0,25 kW Dimensions:1200 x 390 x 1430 mm Weight:185 kg Year:2018 New/unused Number in stock:1 piece(s) Price: Quotation request Description: New unused Profroid condensing unit with 1 scroll compressor. Mentioned capacity at an evaporating temperature of -8°C and an ambient temperature of +32°C. Please visit also our website: used-refrigeration
PROFROID QC MT 30 PK Brand:PROFROID Type:QC MT 30 PK Stock number:M21-1292 Cooling capacity:2.25 kW Application:Cooling Number of fans:1 Refrigerant:R744 (CO2) Voltage:230 Volts Motor power:0,25 kW Dimensions:1200 x 360 x 1028 mm Weight:125 kg Year:2019 New/unused Number in stock:1 piece(s) Price:Quotation request Description: New unused Profroid condensing unit with 1 scroll compressor. Mentioned capacity at an evaporating temperature of -8°C and an ambient temperature of +32°C. Please also visit our website: used-refrigeration
Engine Brand: PERKINS, Condition: USED, Working Hours: 7700 Hour(s), Engine Condition: Used , Starter Voltage: 12 Volt , , https://www.hamofa.com/stock/compressors/ingersoll-rand-p70wn-compress or-7-bar-used/42278, , = More information =, , Type number: P70WN COMPRESSOR 7 BAR
PROFROID QC LT 75 PK Brand:PROFROID Type:QC LT 75 PK Stock number:M21-1291 Cooling capacity:2.04 kW Application:Freezing Number of fans:1 Refrigerant:R744 (CO2) Voltage:230 Volts Motor power:0,25 kW Dimensions:1200 x 690 x 1028 mm Weight:185 kg Year:2018 New/unused Number in stock:1 piece(s) Price: Quotation request Description: New unused Profroid condensing unit with 2 scroll compressors. Mentioned capacity at an evaporating temperature of -32°C and an ambient temperature of +32°C. Visit also our website: used-refrigeration
maximum number of results exceeded
please refine your search
