132,788 used machines on RESALE, but how to find them? Machine Search
pressure: 17,0 kN stroke: 40 mm throat: 110 mm Working height from to: 70 - 220 mm table surface area: 190 x 140 mm spindle diameter: 30 mm weight of the machine ca.: 60 Kg dimensions: 310 x 190 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 130 mm : 130 x 125 dimensions of saw-band: 1440 x 13 x 0,65 mm dimensions: 350 x 690 x 520 m band speed: 30 - 80 m/min total power requirement: 1,2 kW weight of the machine ca.: 19 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 630 mm turning length: 2000 mm control: Zyklen gesteuert steady: 2 Stk. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
chamber volume: 80 liter useable volume: -- liter friction: -- motor drive power: 390 kW Condition: used - overhauled - with warranty Specification: Internal mixer used - Capacity: about 80 lts - Rotors model: tangential type with 3 wings - Command gearbox: semi-unidrive type - Max speed rotors: about 60 rpm - Closing system: drop-door type - Hydraulic unit for drop-door system - Pneumatic hopper for loading material - DC engine: 390 kW - 1500 rpm - 440 V - New electric cabinet with driving system for variable speed of rotors - N.1 new electric panel - New on board electric system on the machine - Safety devices in according to standard rules - Manual of use and maintenance in English language and CE marking - Reconditioned and guaranteed machine in according to standard rules - Warranty: 1 year The data for this ad was created with ModulMWS - the software solution ...
centre distance: 8500 mm turning diameter over bed: 1070 mm turning diameter over slide rest: 800 mm spindle bore: 128 mm turning speeds: 1,12 - 1120 U/min Control: Alan Bradley 9-series total power requirement: 62 kW weight of the machine ca.: t dimensions of the machine ca.: m 3 Shear Bed, Carriage can bypass Steady Rest and Tailstock 6-position Sauter Turret 360 mm Capacity Self Centering Hydraulic Steady Rest 385 mm Capacity Rotaring Work Support (Used for Gun Barrels) 800 mm 4-Jaw Chuck Tailstock Quill diameter Ø 200 mm Tailstock Taper M.T. 6 Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
; Power [PS]: 2039; Gross weight [kg]: 20560; Engine: Perkins 4012-46TAG3A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000
turning diameter over bed: 800 mm turning diameter over slide rest: 530 mm turning length: 8000 mm turning dia. in gap: 1080 mm spindle diameter: 95 mm speed: 8-800 (21x) U/min total power requirement: 15/22 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-Jaw chuck 3-Jaw chuck 2x Steady Rest 4-Way toolpost The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
EU STAGE 5 Compliant, 50/60 Hz switchable frequency via terminal link, 550 kVA Prime power, Spark arresting silencer; Gross weight [kg]: 6740; Engine: Perkins 2806J-E18TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets CEE-Form:, 2x 16A (1ph+N+E), 2x 32A (3ph+N+E), 1x 63A (3ph+N+E), 1x 125A (3ph+N+E); Water Tank Volume [l]: 1125
; Gross weight [kg]: 3651; Engine: Perkins 1206J-E70TTAG; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets: 125A, 63A, 32A (2x), 16A (2x single phase), Including: Coolant heater and battery charger; Water Tank Volume [l]: 822
; Gross weight [kg]: 735; Engine: Perkins 404J-22G; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 56
angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 15 kW weight of the machine ca.: 4,6 t dimensions of the machine ca.: 1850 x 1550 x 1685mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1160 x 1000 x 1175mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: unbkt. mm table load: unbkt. t table height: unbtk. mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
; Gross weight [kg]: 4103; Engine: Perkins 1706J-E93TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets: 125A, 63A, 32A (2x), 16A (2x single phase), Including: Coolant heater and battery charger; Water Tank Volume [l]: 667
; Gross weight [kg]: 2527; Engine: Perkins 1204J-E44TTAG2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 518
angle steel/side length: unbkt. mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 55+15 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 3850x3050x82800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 7,5 kW weight of the machine ca.: 2,35 t dimensions of the machine ca.: 1580 x 1200 x 1410 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 120 kW weight of the machine ca.: 78 t dimensions of the machine ca.: 6100 x 5150 x 4300mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: 0 kW tool adaptor: 0 total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over slide rest: 940 mm turning length: 10000 mm turning diameter: 1250 mm spindle diameter: 105 mm speed: 1,6 - 315 (x24) m/min voltage: 380 V total power requirement: 75 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-jaw faceplate Power compound The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used Sabroe PAC 202 LM-A water cooled chiller on R717 (Ammonia). Complete with 1 Sabroe SAB 202 LM screw compressor, Schorch KN7315L-AX01B-Z electric motor - 50/60 Hz - 315/360 kW - 2965/3565 RPM, Sabroe OHU 4131 oil separator with a volume of 610 liter, Sabroe GHEA 083002-C separator with a volume of 1650 liter, Alfa Laval MK15-BWFGR plate heat exchanger, Alfa Laval MK15-BWFDR plate heat exchanger and a control cabinet with a Siemens TP700 Comfort controller. The chiller has a capacity of 1668 kW at a water inlet of 12°C and outlet 6°C. Specifications: Brand: Sabroe Type: PAC 202 LM-A Product type: Water cooled chiller Capacity kW: 1668,0 Capacity tons: 474,3 Refrigerant: R717 Weight: 10,700 kg Sizes: 5700x2330x3100 mm (LxWxH) Compressors: Sabroe SAB 202 LM Display: Siemens TP700 Comfort
; Gross weight [kg]: 746; Engine: Perkins 403D-15; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
; Gross weight [kg]: 22100; Engine: Perkins 4016-TAG2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000
; Gross weight [kg]: 7970; Engine: Perkins 4008TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1450
; Gross weight [kg]: 16780; Engine: Perkins 4012-46TAG2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000
; Gross weight [kg]: 9780; Engine: Perkins 4012-46TAG2A; Accessories: Tanker, Control Panel; Water Tank Volume [l]: 2000
; Gross weight [kg]: 10500; Engine: 4012-46TAG3A; Accessories: Tanker, Control Panel; Water Tank Volume [l]: 2000
For sale: Vega radar sensor PS61. XXBAEHKMXX Order number: 2653.3 For more information, please call or send an email. Phone: 06-20758459 E-mail: wh.derikx@gmail.com The price is exclusive of 21% VAT.
; Gross weight [kg]: 12270; Engine: Perkins 4008TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1450
; Gross weight [kg]: 8950; Engine: Perkins 4006-23TAG3A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1360
Automatic Transfer Switch - ATS Panel - ATI Panel, 1.600 Ampere - Applicable for generators up to 1.100kVA; Gross weight [kg]: 215
1 of used motion controller, make Mayr / Pilz, type Primo Compact P21.004.0, part number 0802930, version: 1.7.3.1 (592). Came from operational ZVT packaging machine.
Automatic Transfer Switch - ATS Panel - ATI Panel, 2.000 Ampere - Applicable for generators up to 1.380 kVA; Gross weight [kg]: 330
Automatic Transfer Switch - ATS Panel - ATI Panel, 2.500 Ampere - Applicable for generators up to 1.730 kVA; Gross weight [kg]: 311
used
Fanuc Fanuc Pulse generator A860-0201-T001
Polimero A4 imager washer-dryer; good condition; cleaned and tested; Format 320x220mm; washout with magnetic plate; exposers; Dryer with 2 pull-outs. Exposure-washout-dryer unit Polimero A4; good condition; cleaned and checked; size 320x220mm; washing unit with magnet plate; exposure unit; dryer with two move outs.
spindle diameter: 110 mm x-travel: 4000 mm y-travel: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1210014 Type of machine Floortype Boring Machine Make PEGARD Type AF11 Type of control Conventional Spindle diameter 110 mm X-stroke (mm) 4000 Y-stroke (mm) 2000 Z-stroke (mm) 300/750 Table dimensions (mm) 1200 x 1600 mm Table rotation (degrees) 360 Tool Taper Iso 50 Speeds (Rpm) 4 - 1000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 of used feeder system with vertical delivery, make Pfankuch, type ASB-175 KR (control unit right), with VS 2000 controller, new 1999, product width min/max 47/105 mm, product height min/max 55/300 mm, speed max. 115 m/min (depending on product). Mulitvoltage 90-240V, 50-60Hz, 0.4 KW. Servo driven. Last used to feed coupons 95 x 74 mm at a speed of 120 coupons/minute.
faceplate diameter: 1000 mm swing diameter: 1400 mm turning height: 1400 mm control: SIEMENS 850M total power requirement: 125 kW weight of the machine ca.: 38 t dimensions of the machine ca.: m Stocknumber 1020042 Type of machine CNC VTL Make PIETRO CARNAGHI Type AC 10 CNC Build in 1987 Type of control Siemens 850 M/E Faceplate diameter 1000 mm Max. Swing diameter 1400 mm Turning height max. 1400 mm Total Power (KW) totaal 125 Lenght (mm) 11000 Width (mm) 8000 Height (mm) 6000 Weight 38000 kg Additional information with driven tools with pallet changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 of used feeder system with vertical delivery, make Pfankuch, type ASB-175 KL (control unit left), with VS 2000 controller, new 1999, product width min/max 47/105 mm, product height min/max 55/300 mm, speed max. 115 m/min (depending on product). Mulitvoltage 90-240V, 50-60Hz, 0.4 KW. Servo driven. Last used to feed coupons 95 x 74 mm at a speed of 120 coupons/minute.
pressure: 320 t chamfer lenght: 4000 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 25 t dimensions of the machine ca.: m Brand: LVD Type: PPEB 320/40 CNC brand: Morris CNC model: Solutions ESA 630 Year of make: 1990 Hydraulic Capacity: 320 T Bend length: 4.000 mm Multi V + J-knive Steered backstop X+R Incl. 1 Set of tools Machine weight: 25.000 kg Machine is flat on the ground The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Flame Perkin Elmer mod. AAnalyst 200 Including: Air-Acetylene burner Controlled with LCD touchscreen Refurbished
Lifter Papa Withforce WE 3616 Lifting height 2500 mm Load capacity 1600 kg Load center 800 mm with charger Battery needs to be replaced L x W x H: 2.0 x 1.5 x 2.5 m Year of construction 1992 Weight approx. 1000 kg The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Extraction system for wall mounting Manufacturer Plymoth Special electrostatic precipitator system without paper filter! Type EFO5000 Electrostatic precipitator, function via electrical charging of dust particles. Used to extract oil mist. Details according to photos. Special price
maximum number of results exceeded
please refine your search
