demag p 625 used for sale

Pallet carousel system for filigree ceilings, Fabr. EBAWE = consisting of: - 52 pallets; L= 12.50, W.= 2.50 m - Longitudinal and longitudinal transport equipment - Stacker crane - Curing chamber - Stacking places - Exit car - Cleaning stations - Autom. Concrete spreader - Plotter - Steel processing

Stock# U2473-3 Used bi-wing /lobe pump by Pomac (NL) model PLP 3-3. Contact parts designed in stainless steel (316L). Pump has horizontal location of inlet and outlet, each with diameter 76 mm / 3". Output up to 1 l per rotation of rotors. Maximal output up to 45 m3/h, with maximal rotation of lobes up to 750 rpm. Working pressure up to 15 bar. Currently pump is equipped with Lenze GST06-2M-VBR-100C32 drive, with el motor 3 kW, 230-400 V, 50 Hz. Working rotation of lobes up to 145 rpm, working pressure up to 6 bar. On current drive pump can reach output up to 7 m3/h. Pump is mounted on stainless steel plate.

- 2 x charging batteries with charger - 1 X electr. Closing - Welding Machine - Operating instructions - Normal traces of use - works without problems - Mobile, flexible, easy to pallet - No bending, back-friendly

Optima/alpha pack complete production and packaging line for ELISA test kits, comprising Optima ImmuCoat coating system for the manufacture of 96-well microtitre plates for ELISA tests, B&R machine control with touchscreen control panel. Operation and process steps: 1. Feeding and preparation: Microtiter plates are automatically removed from destackers and transferred to the transport system. 2. Deionisation: To eliminate static charges, the plates are deionised, which is crucial for uniform coating. 3. Coding: Each plate is assigned a unique serial number, which is recorded in the system control for quality control purposes. Keyence printer. 4. Coating: The system precisely dispenses the biological components (such as antibodies or proteins) into the wells of the 96-well plate. The system can coat up to 1.200 plates per hour. 5. Product selection: The system allows the use of up to 12 b ...

Disposable PET filling line consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in a 4x5 arrangement) for 0.5-litre bottles - Crate ejector for 1.0-litre bottles (Gera, 2003) - Case washer with cleaning nozzles - Stretch blow moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Air conveyor for PET bottles (Convair, 2001) - Suction system (2003) - Air transport (KHS Innoline, 2003) - Premix system (Procomac Starmix CM, built in 2001, 250 hl/h) consisting of water degassing, mixer and carbonation with a total of 4 containers - Velcorindo dosing (dmt, Burdomat II G) - Cap feeding and cap conveyor system (Procomac, 2005) - PET bottle rinser, filler and capper (Procomac, 2001) - Labelling machine (P.E. Futura, 2001) for hot glue labelling of wrap-around labels, in block with laser dating (Videojet, 2017, with suction) and label  ...

Additional title: with carbonization, Vessel volume: 500 l, Vessel operating pressure: 1 to -0,15 bar, Vessel operating temperature: 130 °C, Features: flow meter (E+H), blending vessel with stirring unit (5 hl), control panel with push-buttons, carbonization with subsequent calming section, no pressure tanks, no panel

Prominent water treatment plant, consisting of: 1. Softening: The raw water is fed into the double softener. Only one bottle is ever in operation and the other is in regeneration or stand-by. In the softener, calcium and magnesium are replaced by sodium. The system has a volume counter that switches to the other bottle when the preset quantity is reached. Regeneration takes place with saline solution from the brine tank. The value at the outlet is 0°dH. 2. reverse osmosis: Reverse osmosis fills the permeate tank with demineralised water, so-called permeate. Depending on the raw water quality, water temperature, condition of the membrane and correct setting, different conductance values and operating pressures result. The following flow rates are set during commissioning: Permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. permeate tank and ozonisation: The unpress ...

Manufacturer: Oerlikon Model: Plasmatome 20 HPC ( without cutting table ) Year of Manufacture: 2012 Cutting Range: 2,000 mm x 6,000 mm (2 x 6 meters) Material Thickness Capacity: Up to 35 mm Cutting Method: Plasma Cutting Find more here - / Contact us at -

Sizing saw Brand Panhans Type: 680 / 200 New machine Basic construction - Solid German machine construction - approx. 1150 kg - Machine body manufactured as a stable welded frame construction from strong-walled steel profiles. - The torsion-resistant and finely planed cast iron table top is mounted on the machine body. - The robust and powerful sawing unit built into the machine body is the guarantor for precise saw cuts. - The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guide for height adjustment as well as the circular saw shaft with 2 ball bearings ensure absolutely smooth running. Supports and stops - The ball bearing-mounted double roller carriage is smooth-running and maintenance-free. Precise and clearance-free running over the full length, guided with hardened and ground prismatic guides ...

Sliding table saw Brand: Panhans Type: 680 100 New machine Technical data: Trolley length 3200 mm Cutting length 3400 mm Cutting height max. 155 mm at 90 ° 105 mm at 46 ° Cut width Width stop 1030 mm Saw blade max. Ø 450 mm Saw blade under table retractable Ø 400 mm Table size cast table top 1200 x 655 mm Table extension plus. 750 x 655 mm Table extension 1200 x 655 mm Table height +/- 20 mm 900 mm Main saw blade speed 3000/4000/5000/6000 rpm Net weight approx. 1051 kg Technical description: Solid German mechanical engineering For trimming, cutting to length, formatting, miter cutting, etc. Dimensionally stable and self-supporting machine body manufactured as a stable frame welded construction from thick-walled steel profiles, laser-processed sheet steel parts and mechanically processed The torsion-resistant and finely planed cast table top is built on the  ...

Vertical panel-sizing saw Brand: Putsch Type: SVP 145 M New machine Description: The SVP 145 M is a vertical panel saw for cutting panels in vertical and horizontal direction. The frame of the saw is completely welded and has a support grid for the workpieces to be processed, consisting of aluminium strips and plastic inserts. The automatic grid displacement ensures that the saw blade does not hit the support bars during horizontal cuts. The lower workpiece supports consist of aluminium soles and plastic inserts. For the easy movement of the workpieces, the machine is equipped with retractable transport rollers. The saw beam and the saw carriage can be moved and adjusted by hand, the saw beam can be fixed in 5 vertical sawing positions for this purpose. The comfortable insertion and removal of the saw head is ensured by an ergonomically shaped handle. Standard equipment: - El ...

Panel sizing saw, vertical Brand: Putsch Type: SVP 420 M New machine Description: The SVP 420 M is a vertical panel saw practical for cutting panels vertically and horizontally. The saw frame is completely welded and has an attachment grate for the workpieces, consisting of aluminum strips and plastic inserts. The automatic grate movement ensures that the saw blade does not hit the contact strips in the case of horizontal cuts. The lower workpiece supports consist of aluminum soles and plastic supports. For simple movement of the workpieces, the machine is equipped with retractable transport rollers. The saw beam and saw carriage can be moved and adjusted by hand, the saw beam can be fixed at 5 vertical sawing positions. The comfortable entry and exit of the saw head is ensured by an ergonomically shaped handle. Standard features: - electrically driven, automatic shift gate ...

Vertical panel saw Brand: Putsch Type: SVP 950 M New machine Description: The SVP 950 M is a vertical saw for cutting panels in vertical and horizontal direction. The frame of the saw is completely welded and it has a working table for the workpieces which consists of aluminium fences with plastic inserts. To prevent a contact with the saw blade while doing horizontal cuts, the frame is equipped with an automatic moving support. The lower workpiece supports consist of aluminium and have lowerable transport rolls. The saw beam and the saw unit can be adjusted and moved manually. Therefore the saw beam can be fixed at 6 vertical sawing positions. The simple shift of the saw head is possible because of an ergocnomical formed handle. Standard equipment: - Electric driven, automatic moving support - Swivable central support for small workpieces (length approx. 4680 mm) - 4 gr ...

Profile grinding machine Brand Ecoline Type: Profilsand 6 New machine The customized solution for sanding individual parts such as for window profiles or moldings. Flexibility also in the choice of material and surface to be sanded: The Profilsand 6 can process different surfaces (impregnated, primed...) and types of wood (solid wood, veneered parts, MDF, etc.). The machine is equipped according to your specifications. Basic machine - Machine bed made of steel frame to ensure high stability. - Ground and therefore absolutely flat surface of the machine bed. - All movements of the aggregates are carried out on linear guides with recirculating ball bearings to ensure durability, precision and strength. - Feed via a driven conveyor belt. - Adjustable support rollers for supporting the parts between the lower units - Pressure rollers are positioned at the top alo ...

PUR gluing Brand: GP Service Type: EASY PUR general description - PUR adhesive unit with integrated pre-melt container for a permanent zero joint - greatly reduced maintenance and cleaning costs due to PTFE coating of all assemblies (except glue roller) - suitable for flexible production capacities - order in synchronism adaptable to all common machine manufacturers: - Can be mounted directly on HOMAG machines - also in alternation with original glueing unit! - Stefani with adapter - Biesse with tag - others on request Application height 60 mm, higher on request Feed up to 30 m / min, higher on request low order quantities (

Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

- pile lift - max capacity: 1000 kg - Format Platform 80 x 120 cm

- pile lift - max capacity: 1000 kg - Format Platform 80 x 120 cm

Steam Boiler Plant 120 MW / 30 bar Saturated Steam This steam boiler plant is in good condition and designed to produce 54 kg/sec of saturated steam at 30 bar for industrial processes. The boiler features a membrane wall construction and is supported from the bottom. It is equipped with four burners located at the top of the boiler: two fired by natural gas and two by light fuel oil, each with a capacity of 30 MW. The firebox base and lower manifold are protected by refractory tiles. The flue gas side of the boiler operates under positive pressure. The plant includes two 100% capacity combustion air fans; there is no exhaust gas fan. The equipment has been meticulously maintained and upgraded throughout its operational life, meeting the most stringent modern quality standards. The steam boiler operates on natural water circulation, with heating surfaces arranged across two draughts ...

PIAB Vacuum Conveyor C3304-600 – Stainless Steel Sell PIAB vacuum conveyor type C3304-600, ideal for powders and bulk materials (food, pharmaceutical, chemical). Stainless steel AISI 316L Conveying capacity up to approx. 10–15 t/h Pneumatic operation Filter system up to 0.3 μm Quiet & low-maintenance Used, good condition. Viewing possible by arrangement.

PAPER CUTTER POLAR 137 E -Year 1998, Only one owner -Cutting width max. 1370 mm -Feed depth max. 1370 mm -Clamp opening max. 165 mm -Front table length 730 mm -Complete programmation - Display -Photocells -Air chromed bed – oversize lateral air tables -Power supply 3 phase, 380V – 11 Amp -Two spare knives, knife change tools, manuals and all accessories -In very good conditions, totally checked and cleaned -Any test is possible, available immediately in our warehouse

General SKU249Y416 LocationBarneveld CEcheck Pressure Working pressure7 Bar Main Features MaterialPolypropylene Specified Features - Dosing pump MaterialPolypropylene Dosing pumps Pumpcheck Number of pumps:4 With frequency invertercheck Pneumatic drivecheck Information MakeEcolab Year of construction2003 Mounted on framecheck With switchgearcheck Floorspace1,20x1,00 m Total height1,43 m Extra SpecificationsWith 2x2 membrane pumps, Crane Process Flow Technologies, type DL15-PM-TTT, : Distribution systems for CIP systems Dosing pumpsEcolabPumps > Dosing pumpsBrand > Ecolab What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Manufacturer: Presona Model: LP50EH2ECC Year of Manufacture: 2021 Type of Machine : Baler Year of commissioning: 2022 Pressing force: 500 kN Pressure: 25 MPa Certification: CE marked Control System - PREMI 50 The machine is equipped with a PREMI 50 PLC control unit featuring a 7 inch colour touchscreen. It allows full parameter settings for the press and displays production data for up to 15 press programs. The PREMI 50 includes an internet interface for remote monitoring,diagnostics, and production data access via a secure internet connection from any computer. Find more here - / Contact us at -

Large amount of APV Polimers plastic crates, dimensions each crate: 600 mm x 400 mm x 150 mm.

Steritech continuous pasteurizer with cooling tower consisting of: - Steritech pasteurizing and cooling tower used for 360 gram cups, serial number: CV.17.0620, year of construction: 2017, consisting of 1 tower for pasteurizing and 3 towers for cooling, product: 360 gram, maximum product height: 130 mm, pasteurizing tower, 13 trays, process time: 20 minutes, full steam: ca 37 kWh, cooling towers, 26 x 3 trays = 78 pieces, process time: 121 minutes, glycol water -5°C, ca. 250 kWh, power: ca 25 kWh, water: 4 x ca. 900 liter, total cycle time: 141 minutes, capacity: 2000 kg per hour, pasteurizing tower with Tranter International AB heat exchanger, type: GCP-026PR, serial number: 246486-1, year of construction: 2017, volume: 7 & 8 liter, Wilo pump, type: BL50/140-7.5/2, cooling towers with Tranter International AB heat exchanger, type: GXD-042NR, serial number: 246486-2, year of construct ...

Pile lifter Polar LW 1200-4; cleaned and tested; Tray size 840x1270mm; Load capacity 1200kg; Stacking device; Photo sensor; Stroke 850mm. Pile lift Polar LW 1200-4; cleaned and checked; size 840x1270mm; lifting capacity 1200kg; angular boards; Photo Sensor; throw 850mm.

Pump Manufacturer: Dynamic Pumps Pump Type: FTB 200-150-315 Engine manufacturer: KSB Motor power: 30 kW Speed: approx. 1470 rpm at 50 Hz Flow rate: approx. 300 m³/h Lifting height: approx. 21 m Voltage: 400 V Triangle / 690 V Star at 50 Hz Degree of protection: IP55 200 mm suction connection 150 mm pressure port 315 mm impeller diameter Single Stage Centrifugal Pump axial entry (front) radial exit (top)

Offer 26088 Technical data: - Flat steel shears - Flat steel - 400 x 16 mm - or: 300 x 18 mm - Profile steel shears - L- and T-irons at 90° 130 x 12 mm - Square steel / round steel 40 / 40 mm - Notches - With square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 60 t - Projection 400 mm - Stroke approx. 10 to 50 mm - Perforates in steel up to Ø 31 in 15 mm - E. Contact stop - various punches + dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

- Touch Screen Monitor - Autotrim - Air table - Side air tables, left / right - Air corners - Lift LW 1000-4, 2000 - Jogger RA-4, 2006 mit Waage - Transomat TR130EL-4, 2008 - Spare knife

General SKU035F151 MakeKoruma Maschinenbau KG Neuenburg TypeDisho V.100/45 Pharma No.2996 Year of construction1982 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume45 Ltr. Motor6 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity45 Ltr. Vessel sizesø 420 x 400 mm Conical bottomcheck With covercheck Top connectionscheck With jacketcheck With gate type stirrercheck Motor0,26 kW, 400 V Speed mixing shaft28 rpm With homogeniserø 100mm Motorhomogeniser ± 4,9/6,0 kW MaterialStainless steel 1.4571 (316Ti) Information LocationBarneveld With switchcheck Floorspace1,5x0,7 m Total height1,7 m Weight300 kg Extra SpecificationsMixing, dispersing and homogenising unit, ø 100 mm: with vacuum pump, 0.75 kWProcessing vesselsFryma KorumaProcessing vessels > Processing vess ...

Pisto CP3 almond roaster / nut caramelizer, incl. cooler, built in 2025, for batch production and coating of roasted almonds, caramelized nuts, and similar confectionery products., The system consists of three rotating copper kettles, each heated by a gas burner. The integrated stirring blades ensure nuts, sugar, caramel, sesame or other ingredients are evenly mixed and processed. The copper kettles are tiltable, allowing the finished product to be discharged easily and in a product-friendly manner., The machine is built in a stable stainless steel construction and has been retrofitted with wheels. It is prepared for operation with mobile gas cylinders and is thus particularly suitable for flexible production areas, manufacturers, confectionery producers, nut processors, event/entertainment companies, or test and small-batch production., Additionally belongs a Cooler type CB10 with 10 pl ...

The NeoDen ND1 is a high-precision automatic SMT screen printer designed for professional PCB solder paste printing. With a repeat accuracy of +/- 12.5 micron at 6 sigma and Cp of 2.0 or greater, it delivers the precision and reliability demanded by high-quality electronics manufacturing. Manufacturer: NeoDen Model: ND1 Fully Automatic Vision Printing Machine Year of Manufacture: 2026 Type of Machine : Stencil Printer Technical Specifications - Maximum PCB size: 450x350 mm - Minimum PCB size: 50x50 mm - PCB thickness: 0.6 mm to 14 mm - Maximum PCB weight: 10 kg - Transmission speed: 1500 mm/second maximum - Template frame size: 370x470 mm to 737x737 mm - Maximum print area: 450x350 mm - Print head: closed-loop print head with straight line motor - Scraper type: steel or rubber scraper, angles 45 / 55 / 60 degrees - Scraper length: 220 mm to 500 mm - Scraper blade thicknes ...

The NeoDen ND2 is an advanced SMT automatic screen printer designed for easy operation, high precision, and high stability PCB solder paste printing.With a repeat position accuracy of +/- 10.0 micron at 6 sigma and Cpk of 2.0 or greater, the ND2 delivers superior precision over its predecessor the ND1. Manufacturer: NeoDen Model: ND2 Fully Automatic Visual Printer Year of Manufacture: 2026 Type of Machine : Stencil Printer Technical Specifications - Maximum PCB size: 450x350 mm - Minimum PCB size: 50x50 mm - PCB thickness: 0.4 mm to 6 mm - Maximum PCB weight: 3 kg - Transmission speed: 1500 mm/s maximum - Transfer height from ground: 900 +/- 40 mm - Transfer direction: left-right, right-left, left-left, right-right - Template frame size: 470x370 mm to 737x737 mm - Maximum print area: 450x350 mm - Print head: floating intelligent printing head with two independent direct co ...

A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible.

General SKU273K305 MakeHaagen & Rinau Mischtechnik Bremen TypeSRC-200 No.8233751 Year of construction1987 LocationBarneveld Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume345 Ltr. Motor6 KW Specified Features - Processing vessel Closed stirring vesselVacuum processing vessel (1x) Capacity345 Ltr (useful capacity 50-200 Ltr) Vessel sizesdia. 740x550mm Dished bottomcheck Dished top sidecheck With covercheck With jacket(32,5 Ltr) Max. temperature143/151 Degr. C. (vessel/jacket) With anchor stirrerscraper stirrer (Teflon scrapers missing) Motor5,5 KW, 220/380 Volt Speed mixing shaftvariable With homogenisercheck Motor1,5/6,0 KW, 380 Volt MaterialStainless steel 1.4301 (304) Information Floorspace2,2 x 1,2 M Total height2,9 M Weight1800 KG Extra Specifications- With vacuum pump mak ...

General SKU040Z162 MakeBrogli AG Allschwill TypeMH-2000 No.2931 Year of construction1989 LocationBarneveld Pressure Working pressure0.5 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume2000 Ltr. Motor21 KW Specified Features - Processing vessel MaterialStainless steel 1.4301 (304) Open stirring vesselVacuum processing vessel (1x) Capacity2000 Ltr Vessel sizesdia. 1530x1100mm, Vessel WITHOUT jacket Dished bottomcheck Flat top sidewith mechanic lifting (2,2 LW, 380 Volt) With covercheck Outletdia. 90mm With anchor stirrerscraper stirrer Motor8,5/12,0 KW, 380 Volt With homogeniser(± 750/1500 Rpm) Motor18,0/21,0 KW Information With switchgearcheck Floorspace3,8x2,0 M Total height2,9 M Weight7000 KG Extra Specifications- Equipped with 2 spiral stirrers (Helix) -- RECONDITIONED -- Technical specs Extra informationVessel without jacket Pro ...

General SKU300U900 MakeDott. Bonapace LocationBarneveld CEcheck TypeMC-50 Main Features MaterialStainless steel Specified Features - Powder filler MaterialStainless steel 1.4401 (316) Powder fillercheck Information No.01/04 Year of construction2004 With switchcheck Floorspace0,65x0,33 m Total height0,39 m Weight70 kg Extra Specifications50 cycles, Multigel vibrator unit, type MC100, 230 volt comes with :various plates. Powder fillersGeneric medicinesDott. BonapacePackaging machines > Powder fillersIndustries > Pharmaceutical > Generic medicinesBrand > Dott. Bonapace What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

UNOX CHEFTOP MIND.Maps PLUS COMBI OVENS GN 2/1 – Model XEVL-2021-YPRS with 3 rack trolleys and underframes, Used professional combi steamer from UNOX in large BIG-size version for GN 2/1 trays. The unit is ideally suited for large kitchens, catering, cook-and-chill applications, community catering, production kitchens, bakeries as well as convenience and food production., The machine has a capacity of 20 × GN 2/1 and enables baking, cooking, steaming, regenerating, low-temperature cooking, as well as combi-steaming in a single system. Through the MIND.Maps PLUS control, cooking processes can be programmed and saved individually., Included in the scope of delivery:, - UNOX CHEFTOP MIND.Maps PLUS BIG combi-steamer, - 3 x suitable trolleys 20/1 GN, - 3 x mobile stainless steel low frame / slide-in racks, - 60 sheets for the tote carts, The plant/system was, according to the documents, wi ...

An old, however overall only 12 months operated, Friedrich Petig row punching line for copper busbar production (punching) is available. Product: copper bars/busbars/busbars/Cu-bars, control system: Siemens. Documentation available. An on-site inspection is possible.

General SKU418U1312 MakeGlatt LocationBarneveld CEcheck TypeLab-coater GC-300 Main Features MaterialStainless steel Motor4 KW Inlet diameter200 mm Specified Features - Coating pan Coating installationcheck Capacity2,5 Ltr . Batch size0,5-2 kg Pan diameter300 mm Pan depth300 mm Cylindrical width210 mm Conical width90 mm In-/OutletDia. 200 mm Motor0,10 kW, 200 Volt, 3000 rpm With frequency controllercheck Pan speed10-30 rpm With electric heatingcheck (capacity: 5 kW, max. temp.: 70°C) With fancheck (2x blowers) Capacity10-250 m³/h Motor0,36 kW 400 Volt, 2800 rpm & 4,0 kW, 400 Volt, 4670 rpm With air filtercheck With spraying armcheck MaterialStainless steel 1.4301 (304) Information No.100703 Year of construction2002 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1,2x1,0 m Total height1.5 m Weight420 kgCoating pansOther ph ...

This is a stainless steel construction compact pita line by SalTek Bakery Equipment. It makes the thin Lebanese pita bread and the slightly thicker Egyptian pita bread. It comes with its stainless steel hood with make-up air unit. Line includes dough divider, 1st proofer, sheeter, 2nd proofer, oven, hood, make-ap air unit, cooling conveyor. Can provide help with start up of the line.

Hobart H-600-T 60 Qt Bakery Pizza Dough Mixer With Bowl 1 Attachment Model:H-600-T Serial Number:11-422-867

Model: HL662. This machine is a top tier mixer in working condition. Comes with stainless steel bowl, and hook. It can be used as a single phase or 3 phase Any questions feel free to ask

Polar 66NET year: 2012 cutting width: 66 cm Large Color Display 18.5" / 47 cm light screen protection Stainless steel table 1998 programs

Box Width:750 Box Height:1000 dimensions of the machine ca.:1200 m2 Powder Coating Line EISEMANN very less used and in very good condition. New Price of the plant 2.600.000,- EURO Power & Free conveyor system with 250 car trains, 5-Zone Spray Pre-Treatment System, stainless steel - water drying cooling zones. 2 nos.of WAGNER stainless steel powder cabins each with ABB robots & double-automatic powder guns, as well aseach cabin is equipped with a hand-powder device. Powder Curing Oven, direct gas heated three-zone Spray cleaning equipment, Stainless Steel - Sewage Treatment Plant, Evaporator with Reverse Osmosis System & Fresh-Air Device. Opening Cross Section Areal: Width 750 mm, Height 1000 mm Technical Details: Pretreatment conveying speed 2.3 m / min. Pretreatment surface area approx. 200 m2 / h. Painting Surface approx. 120 m2 / h. Throughput of workpieces approx. 4,000 k This Powede ...

pressure:40 t throat:220 mm stroke:8 / 88 mm table pass:ø- abgesetzt 225/200 mm ram head dimension:400 x 250 mm distance table/ram:228 mm stroke adjustable from - to:30 - 140 mm ram adjustment:63 mm thickness of bolster:80 mm no. of strokes:70 Hub/min total power requirement:5,5 kW weight of the machine ca.:2600 kg dimensions of the machine ca.:1100 x 1300 x 2300 mm Documents:vorhanden

pressure:250 t passage width:1280 mm stroke:bis 500 mm total power requirement:47 kW weight of the machine ca.:23 t dimensions of the machine ca.:2200 x 1850 x 4600 mm table surface area:1250 x 1000 mm dayligth:800 mm daylight between the side columns:520 x 750 mm table height above floor:1000 mm Documents: vorhanden

pressure:400 t distance between columns:1250 mm stroke:250 fix mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:825 mm table surface area:1000 x 900 mm column travel -side:400 x 700 mm ram surface:1000 x 900 mm ram adjustment:100 mm capacity of ejector in table:40 t ejector stroke:160 mm power capacity:270,0 kW weight:44,0 t Dimensions (WxDxH):2,4 x 3,6 x 7,2 m height over floor:6,4 m

pressure:250 t throat:450 mm stroke:36 - 126 mm no. of strokes:40 /min distance table/ram, max. stroke up, adjustment up:525 mm table surface area:1000 x 750 mm hole in the table:400 x 360 mm table height over floor:1000 mm ram surface:600 x 500 mm ram adjustment:111 mm power requirement:19,0 kW weight:13,5 t Dimensions (WxDxH):1,3 x 3,2 x 3,35 m clutch:pneumatic overload protection in ram:mechanical ram adjustment:motoric

pressure:2000 t distance between columns:975 mm stroke:400 mm distance table/ram, max. stroke up, adjustment up:1000 mm table surface area:1015 x 1050 mm table height over floor:800 mm capacity of ejector in table:6,3 t ejector stroke in table:100 mm capacity of ejector in ram:65 t ejector stroke in ram:100 mm ram surface:975 x 1050 mm return capacity:150 t speed down:235 mm/s speed up:250 mm/s working speed:5 - 20 mm/s oil volume:4000 l height over floor:3,65 m height beneath floor:3,75 m power requirement:194,0 kW weight:105,0 t dimensions (WxDxH):5,0 x 6,5 x 7,4 m