127,294 used machines on RESALE, but how to find them? Machine Search
2x Muller Martini Progress cross perforation cylinders: 1. One has gear 72 pitc 1/3” 2. One has gear 96 Pitc 1/4” Good condition, no damages. Available immediately.
Inv. Num. : 8766 Type: SPITFIRE 1500 Producer: Pierce Created: 2012 Parameters: Software: Lantek Expert Duct Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 15 mm Plasma Source: HYPERTHERM 85A Machine height: 1400 mm Machine length: 3650 mm Machine width: 2520 mm Equipment: Exhaust fan
Pallet fork 2 t with Bobcat 90 cm holder, FEM2, tine carrier 102 cm
2.0 t capacity, 80x40x1200 mm tines, with Bobcat T30.60 & T35.105 telescopic handler mount
Hammer pile driver suitable for HM500 with 120 mm inner diameter, photos are only an example !
100 mm diameter pile driver suitable for Hammer HM100
NEW, FEM3A, 4.5 t load capacity, with 120 cm long tines, with Manitou attachment, 246 kg dead weight
NEW, - CROCODILE SHOVEL with 2 rear hyd. cylinders, - strong double stiffened hold-down, - 220 cm width, - 0.77 m³ capacity, - 410 kg dead weight, - with Euro mount, photos are only an example!
NEW Pallet fork 1200 x 120 x 50 mm FEM 2A 2.5 t load capacity Carrier width 1.20 m with Liebherr 506 attachment
BIG pallet fork with Bobcat 114cm attachment, NEW, - Pallet fork 1200x80x40 mm, - FEM 2A, - Capacity: 2000 kg, - Carrier width: 1.20 m, - mass: 159 kg, with Bobcat 114cm attachment
BIG pallet fork with Bobcat 114cm attachment, NEW, - Pallet fork 1200x80x40 mm, - FEM 2A, - Capacity: 2000 kg, - Carrier width: 1.20 m, - mass: 159 kg, with Bobcat 114cm attachment
NEW, pallet fork 200 cm wide, 4.5 t tines, 120 cm long tines, with Volvo BM mount
NEW: FEM3 holder, 3.5t pallet tines, beam width 120cm
180cm extension length, Suitable for tines up to max 130x50mm, ⬠230,- excl. VAT (per pair)
180cm extension length, Suitable for tines up to max 130x50mm, ⬠230,- excl. VAT (per pair)
180cm extension length, Suitable for tines up to max 130x50mm, ⬠230,- excl. VAT (per pair)
Pallet fork extension, 180cm extension length, Suitable for tines up to max 130x50mm, Price per pair excl. VAT.
Pallet fork 120cm, - with Manitou pick-up, - 3.5 tons
Key data: 130 mm
Installed capacity 498 kW, single degassing with vacuum pump, screw Optimized for film processing used for PE/PP. DC Drive Throughput with PE approx. 500-700 kg at approx. 150 kw. Throughput for PP approx. 450-550 kg at approx. 160 kw. Composed of: Foil silo with agitator and discharge screw approx. 5 m³ Regrind/granules, dosing screw, masterbatch, dosing screw, tamping unit. Extruder 130L/D 35 Hot Knock Off Granulator (Water Ring Granulator) Centrifuge Classifying sieve Removal with pressure blower Screw and barrel were renewed in 10/2020, (repair costs 45.000EUR) Groove bushing at the inlet renewed in 2015 is currently still at 60%. A new groove bushing is included as a spare part and is included in the retail price. (NP.ca. €5,000) The number of hours spent on the extruder from repair to dismantling of the system is 851 hours. Cooling system Industri ...
Mepac heavy duty vertical bagging machine for bulk productions.
Manufacturer: Tox Pressotechnik Model: MAG 075.222.A.001 Year of Manufacture: 2008 Condition : Excellent Min./Max. Air Pressure: 0.3 / 0.5 MPa ; 3 / 5 bar Max. Press Force at Max. Air Pressure: 680 kN Total Stroke: 100 mm Power Stroke: 11 mm Machine Weight (without tool): 3420 kg Find more here - / Contact us at -
Offer 25374 Specifications: - Max. pressing force 100 t - Max. ram stroke approx. 500 mm - Lifting speed 25 mm/sec. - Return 125 mm/min - Installation height approx. 1000 mm - Projection to the middle of the ram 380 mm - Pusher clamping surface 530 x 400 mm - Plunger clamping pin 40 mm - Table size 750 x 560 mm - Table hole / through hole in the table 200 mm - Table height above floor 720 mm - Oil filling quantity approx. 200 ltr - Drive 400 V / 11 kW - Space requirement approx. W 1150 x H 3250 x D 1850 mm - Weight approx. 4600 kg
Height=1.6 m, Overall length= 1.6 m, Overall width= 1 m, Suitable for soft dough. Working, good conditions.
Height=1.6 m, Overall length= 1.6 m, Overall width= 1 m, Producer: Eberhardt condition: refurbished In stock Made in Germany Description In excellent working condition fully refurbished bun rounder Eberhardt Piccolo 4 can divide and process even the most sticky soft dough – Easy to clean removable top cover – Rust-resistant light metal cutting head – Dimensions 6359134 cm – Power 0,55 kW – Voltage 400 V amperage 1,7A – 30 divisions processing 40-135 g dough pieces – 3 moulding plates included
Pallet labeling system Type: Pallet labeling system with Zebra Xi4 / RXi4 printing and application unit The pallet labeling system is used for variable marking of pallets with labels at different heights and up to two sides of the pallet (front and side surface). The integrated ZEBRA Xi4 / RXi4 industrial printer prints production-relevant labels (e.g. with barcode, batch or article number) and automatically applies them to the pallet. This ensures clear product and shipping labeling. The system can reliably label both loaded pallets and other containers and can be flexibly integrated into existing conveyor and packaging lines. Features: Variable labeling height (automatic height adjustment) Labeling on 1 or 2 pallet sides Industrial-grade Zebra Xi4 / RXi4 thermal transfer printer Automatic application via swivel arm Integration into existing conveyor lines possible ...
Max. punching force: 100 kN Max. stroke: approx. 50 mm (adjustable via clamping lever) Stroke actuation via footswitch Weight: approx. 600 kg
Injection moulding machine for PET preforms
Injection moulding machine for PET preforms
Injection moulding machine for PET preforms
Maximum Diameter: 110 mm // Minimum Diameter: 32 mm
Output (Packs Per M?Inute): 45 U/min // Type : Barrel
PRESS DESIGN drive system: eccentric / crank PRESS FORCES total force (nominal): 45 to PRESS TABLE table surface (left-right): 700 mm table surface (front-back): 440 mm opening in bed (diameter): 40 mm SLIDE table surface (left-right): 410 mm table surface (front-back): 280 mm stroke rate (max.): 110 /min SLIDE (MECHAN. PRESS) slide adjustment: 65 mm stroke min.: 0 mm stroke max.: 90 mm main drive power: 5.5 kW TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 380 mm distance between columns (H-frame): 360 mm ATTACHMENTS (PRESSES) 2-hand engagement: yes foot engagement: yes European CE standards: yes
APV PASTEURIZATION SYSTEM FOR FISH BROTH 1,000 LITRES/HOUR Automatic system designed for the pasteurization of 1,000 litres/hour of strained fish broth for subsequent packaging. Manufacturer: APV Year: 2002 OPERATION DESCRIPTION: - Inlet temperature: 20 °C - Process temperature: 105 °C - Outlet temperature for packaging: 35 °C The whole process consists of different stages that can be programmed using the control panel: 1. Sterilization: carried out by the circulation of hot water at a temperature of 115-120 °C for 30 minutes. 2. Production with water: cooling water flows inside the circuit until the process temperature that will be applied to the product is reached. 3. Production: the unprocessed product is fed into the regulation tank and then the production phase takes place in the circuit. 4. Cleaning-in-place: the installation is cleaned in place by ...
Used PET bottle filling line. The line includes the following machines: 1. WeightPack Filler: WHT 12/36/28/8-141 NHESL, year 2009 This machine is designed for filling milk into PET bottles. The inlet system includes: - a feeding system with a screw, - a bottle disinfection system with peroxide (H2O2), - a bottle rinsing system with water, - a filling section with scales, - a cap application section with prior disinfection. Technical data: Nominal speed: 167 bottles/min. Machine weight: 9200 kg Electrical cabinet weight: 400 kg Operating temperature: 0 – 40 degrees C Relative humidity: 80% Ambient lighting: 200-250 lux Power supply voltage: 400 V Frequency: 50 Hz Power: 20 kW Nominal current: 62 A Compressed air pressure: 7 bar Air consumption: 1200 nl/min Maximum product pressure: 1 bar Maximum product feed rate: 200 l/min 2. Labeling machine – Sacmi: ...
Brand: SICA Type of Machine: Planetary saw Model: TRC/S/SY/U 63-400 Year of manufacturing: 2000
BIG pallet fork Volvo BM mount 2000 mm, - FEM 3, - Load capacity up to 4 t, - 2000 wide
- Display - Program - Air table - Side tables - Jogger - Spare knife
Pero Washing Machine Technical data see in the VBilder
Turntable diameter: 1640mm, max. pallet height: 2000mm, max. film width: 500mm, max. film roll diameter: 300mm, max. film core diameter: 76mm, film thickness range: 17µm-35µm, max. roll weight: 20kg. Machine dimensions X/Y/Z: 2800mm/1650mm/2800mm, weight: approx. 450kg. An on-site inspection is possible.
Tube Packing Machine Manufacturer: TRANSNOVA-RUF / ABB Type Robot Packer Hours 3630 Very good condition Current setting 100 tubes /min Documentation available
Plant: Integrated raw material preparation for paper production Capacity (design): up to 1,550 t/day Lines: L1 280 t/day (HD pulper 26 m³), L2 550/700 t/day (LC pulper 70 m³), L3 160 t/day (mechanical), L4 160 t/day (broke), L5 160 t/day (chemical), FFD/UBC line 250 t/day UBC or 450 t/day mixed waste Brands & Core Units: VOITH: HD pulper 26 m³, VarioSplit, wire thickener, hot disperser, Integra screening (IntegraScreen/IntegraGuard) KADANT: Coarse screens (OS4/OS2, 1.8 mm), fine screens (0.15–0.25 mm), fractionation Cleaning/fractionation: Twister LC-Cleaner, OF8 (short fiber, 0.15 mm), MSS 10/10 & TL 100 (long fiber), Hidrodisk, EFK 1340, JYC 01/03 refiner Peripherals: WEIMA Shredder, PRESONA Baler Separation finenesses: coarse 1.8 mm / fine 0.15–0.25 mm Strengths: Multi-line layout, integrated reject/UBC processing, high flexibility for chemical, mec ...
Planetary Gearbox PCEF53.5-X1 New suitable for Doppstadt DW 2560 B, DW 3060 Standard, mobile & stationary not suitable for Biopower models (42 teeth on the roller!) Fully assembled with output flange and driver Warranty: The seller assumes a guarantee of freedom from defects for a period of 12 months from the date of delivery. The prerequisite for liability for defects is the professional installation of the gearbox by an authorised workshop.
A boiler system with underfeed firing is available. Heating capacity: approx. 2300kW. An on-site inspection is possible.
A boiler plant is available. Thermal output: 2000kW, water content: 5820l, heating surface: 250m², max. operating overpressure: 4bar, water quality: TRD 612, max. permissible flow temperature: 110°C. An on-site inspection is possible.
General SKU209W100 LocationBarneveld MakeDiessel No.95 18 2134 Year of construction1995 Specified Features - Pressure vessel Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume250 Ltr. Pressure3 Bar Vacuumcheck Pressure vessels MaterialStainless steel 1.4435 (316L) Capacity343 Ltr. (netto 250 Ltr.) Vessel sizesDia. 742x800 mm Dished topcheck Dished bottomcheck With covercheck Top connectionscheck Outletcheck25 mm Max. temperature150°C Information Mounted on legscheck wheels Floorspace1,0x0,85 m Total height1,75 m Weight180 kgPressure vesselsDiesselTanks > Pressure vesselsBrand > Diessel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ...
General SKU212T480 LocationBarneveld MakeOchsner TypeCNY 100-340 Main Features MaterialStainless steel Volume32000 Ltr. Motor11 KW Specified Features - Centrifugal Pump MaterialStainless steel Centrifugal Pumps PumpOchsner Number of pumps:1 Capacity32 m³/h With motor11 kW, 380-420/ 440-480 Volt, 1455 rpm MakeABB motors TypeMBT 160 M InletDN 100 Outlet70 mm Information Mach.No.49061 Mounted on framecheck Floorspace1,65x0,65 m Total height0,62 m Weight400 kgCentrifugal Pumps-Pumps > Centrifugal PumpsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
maximum number of results exceeded
please refine your search
