130,794 used machines on RESALE, but how to find them? Machine Search
Mobile labeling machine for round bottles. Machine incl.: hot stamp system , 3-roller system. PLC: SIEMENS Simatic S7-300 Label dispenser type Pagomat 15/120E.
Used Shrink Tunnel ULMA, Type: HRX-400 - With output tape - The speed adjustment knob is missing - The temperature control indicator/switch has been replaced. Programming still has to be done, because error is displayed - The heating elements work well and reach the target temperature -El. Connection: 380 V, 50 Hz, 16 kW, 28 A Visits and test runs are possible by arrangement.
CONTROLS CNC controls HEIDENHAIN TNC 426 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 610 mm TABLE table surface (left-right): 920 mm table surface (front-back): 380 mm SPINDLE / HEAD spindle revolutions (min): 50 /min spindle revolutions (max): 18000 /min tool fixture: ISO SK 30 TOOL MAGAZINE number of positions: 24 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 2000 mm space requirements -front/back-: 1700 mm total height: 3000 mm total weight approx.: 3200 kg ATTACHMENTS chip conveyor: no coolant unit: yes through spindle coolant attachment: no closed cabin: yes European CE standards: yes Machine in TOP condition - Power ON : ...
Drilling capacity: 35mm, drill spindle taper: MT4, quill stroke: 285mm, reach: 300mm-1000mm, speed: 2500rpm, arm length: 500mm, spindle-to-base plate distance: 1000mm, base plate dimensions X/Y: 1150mm/780mm. An on-site inspection is possible.
A treatment chair Ritter for a dental facility is available. Components: patient chair, dentist’s unit, assistant’s unit, operating lamp, spittoon, and ultrasonic scaler. The electronics have a problem. An on-site inspection is possible.
Good shaped and well maintained 360MW gas fired GE PG9271E CCGT for sales. Year of built 2005, commissioned in 2006, and converted from HFO fuel in the beginning to gas fuel in 2014-15. Shutdown in 2020. Power plant was under power until 2024. Runnong hour : 32000 hrs
CONTROLS CNC Teach In Controls SIEMENS BASIC FUNCTIONS design principle: flatbed number of spindles: 1 WORKING RANGE TURNING swing diameter (max): 720 mm turning diameter (max): 380 mm bar diameter (max): 108 mm worpiece length max.: 1500 mm MAIN SPINDLE spindle revolutions (min): 0 /min spindle revolutions (max): 1200 /min number of gears: 3 spindle bore diameter: 108 mm X/Z SLIDE traverse velocity Z (max): 5000 mm/min traverse velocity X (max): 5000 mm/min rapid traverse Z: 5000 mm/min rapid traverse X: 5000 mm/min tool fixture: Steel Holder TAILSTOCK distance betw. centers (max): 1500 mm sleeve stroke: 200 mm sleeve diameter: 120 mm taper: MK 6 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 4050 mm space requi ...
CONTROLS CNC controls SIEMENS 840 C WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter: 457 mm grinding width max. - throughfeed grinding: 80 mm material thickness max. - throughfeed grindin: 20 mm grinding width max. - plunge cut grinding: 205 mm material thickness - plunge cut grinding: 80 mm GRINDING SPINDLE 1 drive power: 23 kW GRINDING SPINDLE 2 drive power: 23 kW COMPONENT-FEEDER Feeder Design: rotary Feeder feeder velocity max.: 240 mm/min feeder velocity min.: 20 mm/min Scope of delivery: - Machine - emulsion tank new in 2012 Measuring control IONIC 17A
quantity: 1 Koffer : . The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items Accessories for your workshop If you want to sell machines, production lines, or your business, then talk to us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Two identical timelapse cameras Enlaps, one of them including an annual license, are available. Years of manufacture: 2023/2024, image sensors: 2, camera resolution: 12MP, single image resolution: 2x4608/3456 pixels, panorama resolution: 6K, combined field of view: 220°, min. capture interval: 30s, device dimensions X/Y/Z: approx. 210mm/180mm/70mm, weight: approx. 20kg. Both devices are equipped with reinforcement plates and mounting arms. The device manufactured in 2024 additionally includes a myTikee PRO Storytelling license. Documentation available. An on-site inspection is possible.
x-travel: 2500 mm y-travel: 2500 mm z-travel: 1700 mm control: Siemens Sinumerik 840 D max. workpiece weight: 6000 kg spindle diameter: 130 mm quill stroke: 700 mm tool taper: ISO 50 DIN 69871 - AD max. torque at the spindle: 1847 Nm total power requirement: 65 kW weight of the machine ca.: 45 t dimensions of the machine ca.: 10,9 x 9,3 x 5,7 m Work table -Clamping surface 2500 x 2000 mm -Table height above floor 800 mm Feed speed -x-axis 0.5 to 10000 mm/min -y-axis 0.5 to 10000 mm/min -Z-axis 0.5 to 10,000 mm/min -Rapid traverse (x/y/z) 25 / 25 / 25 m/min -Max. feed force (x/y/z) 28,000 / 27,000 / 28,000 N Spindle speeds in rpm -Gear stage 1: 6 to 1004 rpm -Gear stage 2: 950 to 4000 rpm Equipment/accessories: -Approx. 30 SK 50 tool holders -1 measuring probe -Coolant system/paper belt filter & chip conveyor -Cooler -Oil mist extraction -Fixators -Technic ...
We currently offer: New Perkins 4 Cylinder Engines Type: 404A-22G1 2.2 liters RPM 1500 Power: 20.3 KVA You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
Key data: 648 KW, 810 kVA
We currently offer: Perkins generator set Type: 3012-TAG2A Generator Stamford Type: HC. I634G1 Power: 810 KVA / 648 KW RPM 1500 Hz 50 IP 22 AVR Control MX321 Year of construction 2002 Operating hours 74 Control cabinet not included You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
We currently offer: Perkins generator set Type: 4408/1500 Generator LeRoy Somer Power: 150 KVA Year of construction 2022 IP 23 Hz 50 RPM 1500 AVR control R150 Operating hours: only ran 1h for testing Metrics: L: 3.30m H: 2.10m B: 1.20m Weight: 2 tones You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim
x-travel: 900 mm y-travel: 300 mm z-travel: 1000 mm control: Siemens Sinumerik 840D max. workpiece diameter: 1600 mm max. module: 20 mm tip circle diameter: 350 mm Milling arbour diameter: 375 mm Total closing value: 80 kVa weight of the machine ca.: 33,5 t dimensions of the machine ca.: 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Welding dimensions: 1170x900mm, max. product height: 200mm, film: PO, PE and PVC, half-tube film, max. film roll dimensions: 1050x250mm, connected load: 23KW, length: 2640mm, width: 2850mm, height: 1220mm, weight: 600kg. Comes with documentation, shrink tunnel, two conveyor belts and film. The machine has been used very little, only ran for a few hours. An on-site inspection is possible, the machine is immediately available.
Cito Pac suppository filling line Filling, cooling, and sealing machine for suppositories in preformed plastic packages. Revision made in 2023 • two filling points • filling machine SFD10CP • dosage per filling point: from 0.5 to 3.5ml • cooling tunnel: KTE-10 CP • cooling path: 25 m (approx) • sealing machine: BST-10 CP • production capacity: up to 10,500 suppositories/hour (approx)
The machine is in good technical condition, after prior agreement it is possible to test it. Control system: Fanuc Max. turning diameter: ø65mm Max. workpiece length: 300mm Turret head: 2x12 driven positions Bar feeder: IEMCA master 880 MP Cooling + chip conveyor
weight of the machine ca.: 3,9 t : 50 control: Fanuc changer: 6 fach centre distance: 1500 mm spindle bore: 80 mm available since 22th of september: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 800 mm table width: 800 mm table load: t weight of the machine ca.: t dimensions of the machine ca.: m Used pallets for a MAZAK FH 8800 machining center. 10 pallets are available. Price is for one pallet. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Philips Diagnost TH/FS/VE with the following system components: - Generator Optimus 50 - Tube SRO 0951 0.3/1.0_Bj. 2014 - Tube tripod Diagnost FS - Vertical tripod Diagnost VE/VT Can also be used as a pure lung X-ray workstation. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. It is packed on pallets, professionally lashed and wrapped in stretch film and can be picked up immediately • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a sp ...
Polar 92X High speed cutter Year 2004 Program Large side tables Spare knife Photocells
Laboratory screening machine Pfeuffer Sortimat K3, Screen stack with 3 sieves Slot perforations 1.1 mm, 1.8 mm (rye) and 3.5 mm Interchangeable screen with frame 2.0mm (wheat) 230V, with power cord. cleaned and test run carried out Very good condition
height of profile: 60 mm : 60 weight of the machine ca.: 188 kg dimensions of the machine ca.: 0,85 x 0,45 x 1,25 m foot switch: - Fabr.-No.: 292539 - pneumatic clamping head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working range: 1.050 x 650 x 250 mm max. workpiece weight: 400 (800) kg control: Agievision AGIE max. conicity: 30° / 100mm travel -x axis: 500 mm travel -y axis: 350 mm travel -z axis: 426 mm travel U x V-axis: +/-70 / +/-70 mm rapid traverse X-axis: 3 m/min rapid traverse Y-axis: 3 m/min rapid traverse U-axis: 0,6 m/min rapid traverse V-axis: 0,6 m/min rapid traverse Z-axis: 0,6 m/min wire dia.: 0,2...0,33 mm total power requirement: 12,1 kVA weight of the machine ca.: 3,9 t dimensions of the machine ca.: 2,8 x 2,4 x 2,3 m Documents: Wire Eroding Machine AGIE - Agiecut Progress 3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
stroke: 600 mm hydraulic: ja : keins dabei weight: 3,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 3500 KG, 30900 mm, 4900 mm
SSI Schaefer PR600 – 30.90 m | Height 4.90 m | Floor + 2 levels | Shelf load up to 3500 kg | Used Pallet rack for sale Used pallet racks from SSI Schaefer are among the most popular solutions for efficient and safe warehousing. This heavy-duty racking system is ideal for warehouses, industrial and logistics companies that need stable and durable racks for the storage of Euro pallets. The proven PR600 design offers high payload, maximum flexibility and is a perfect fit for storing heavy goods. Buying used here means: tested brand quality at a particularly attractive price – immediately available for new construction, conversion or expansion of your existing shelving system. Individually adaptable: The shelf frames (type P120) can be converted to your desired height – precisely and professionally in our workshop. We supply tailor-made shelving solutions for every storage req ...
Width 66 cm Year of manufacture 2004 Pallet feeder PFH 66 Tremat Sheet Separation System Double Suction Wheel 4 fold pockets in the parallel fold section Automation Kit II Automatic folding pocket adjustment Automatic folding roller adjustment Downstream knife shaft 2 folding swords in the crossfold section 1 more fold pocket after the 1st cross break Shed display SAK without compressor New folding rollers and bearings in parallel fold Machine condition: cleaned and checked Price on request. We supply and install worldwide.
This 2015 TOMSA DESTIL Alcohol Dehydration Plant is designed for the large-scale production of high-purity ethanol. It processes distilled alcohol (95.5% v/v) into dehydrated alcohol with up to 99.8% v/v concentration, suitable for beverages, industrial applications, or biofuel. The plant has a nominal capacity of 90,000 liters per day and operates with advanced molecular sieve technology using pressure swing adsorption (PSA), ensuring high efficiency, low energy consumption, and fully automated operation. Condition & Usage The plant was barely used and only produced 2,000 m³ of dehydrated alcohol during its operation, leaving the equipment in excellent condition. Key Features - Capacity: 90,000 L/day dehydrated alcohol (99.8% v/v). - Feedstock: Distilled alcohol at 95.5% v/v. - Technology: Molecular sieve dehydration with PSA system. - Fully automated and continuous operation. Fi ...
Key data: 500 mm, 45 °
The machine is fully functional, pictures are attached. On request, we will also be happy to send you an up-to-date video showing the machine in operation. Aluminum Double Miter Saw Make: Pressta-Eisele Type: LMS D 450/500 Classic Single II TU/6 Year of Make: 1995 Saw blade size: 450 or 500 mm min./max. cutting length: 240 / 6000 mm Cutting speed: 2820 rpm. Air pressure: 6-8 bar Drive power: 2 x 2.2 kW Weight: 1450 kg External dimensions: approx. 7500 x 1490 x 1790 mm Cuts: 45°-90° (adjustable both blades) Nozzle for suction approx. 70 mm with -Single II control can be positioned electronically -pneum. Clamping devices -pneum. Mist spraying device Good condition, fully functional, ready to plug in for subsequent and immediate use. If you are interested in purchasing the machine, please make us an offer that is subject to change.
Reference ID PP-50993 Category 4-Colors Manufacturer Adast Model Polly Prestige 474 Year Built 2004 Color 4 Impression 117 Working Hours - Speed-- Max. size 52x74 cm Min. Size - Condition Good Location Europe Availability Immediately Machine Description 4 colors Alcolor dampening CIP4 IR dryer semi automatic plate change straight machine Roller and Blanket wash Impressions: 117 million
Key data: 100 t, 215 mm, 3100 mm
Ref.Nr. 00882 Name of the system: Used press brake Manufacturer: Beyeler Model PR4 1000 KN x 3100mm Year of construction 2000 Machine hours Not visible Power 100 tons Working range 3100mm DNC 80 control system Mains voltage 400V Connected load 5.5kW Machine weight 7000 kg Mains Frequency/Frequez 3~50Hz Max Pre-Fuse 20 AT Max Compressed Air 8Bar Max closing speed mm/s 200mm/s Pressing speed 1-10 Max stroke 215mm Max stop time 110mS Min safety distance 350mm Technical condition Fully functional
Weibert BS 750E profi Log band saw The log band saw is designed exclusively for sawing soft, hard, dry, wet and frozen materials, tree trunks or prismatic workpieces. Their length depends on the design of the machine. The material is placed on the supports of the rail track and fastened. The sawing unit is fed manually. Max. trunk diameter 750 mm Max. width of the boards 730 mm Max. cutting length 3,700 mm (3.7 meters), expandable! Min. cutting length 900 mm (0.9 meters) Saw blade stroke min./max. = 20/540 mm Max. cutting depth 220 mm Wheel diameter/width = 400/25 mm Motor power 7.5 kW (5.5 kW S1/100%) Motor power height adjustment 0.12 kW Saw blade length 3,600 mm Saw blade speed 15 m/s Total length of the basic version 4,600 mm (4.6 metres) Weight approx. 450 kg Optional for an extra charge: Extension section 2.3m Aspirator Lathe rod
Height=2.17 m, Overall length= 0.62 m, Overall width= 1.6 m, Net weight= 265 kg,
Height=1.95 m, Overall length= 0.85 m, Overall width= 1.3 m, Net weight= 110 kg,
Height=1.16 m, Overall length= 0.55 m, Overall width= 0.68 m, Net weight= 138 kg,
Height=1.39 m, Overall length= 2.27 m, Overall width= 0.99 m, Net weight= 66 kg,
Height=1.1 m, Overall length= 1.2 m, Overall width= 1.5 m, Net weight= 515 kg,
Height=1.1 m, Overall length= 0.5 m, Overall width= 0.42 m, Net weight= 110 kg,
Height=2.05 m, Overall length= 1.44 m, Overall width= 1.58 m, Net weight= 595 kg,
Vertical Wood Band Saw PROMAC SW-430 Throat depth: 400 mm Table size: Depth 600 mm x Width 430 mm Tilting table from 0 to 40° Blades dimensions: Length 3330 x 15 mm x thickness 0,6 mm Maxi cutting height: 200 mm Steering wheels diameter: Ø 430 mm Voltage: 380 V Motor: 1,5 kW Width: 800 mm Depth: 900 mm Height: 1900 mm Weight: approx 150 KG Year of construction: 2011 (machine in very good condition) Supplied with 2 spare blades
Height=1.22 m, Overall length= 0.56 m, Overall width= 0.57 m, Net weight= 545 kg,
Height=0.55 m, Overall length= 0.3 m, Overall width= 0.58 m, Net weight= 39 kg,
Height=0.5 m, Overall length= 0.3 m, Overall width= 0.55 m, Net weight= 38 kg,
Polar Tumbling drum 2017, Stainless, flavouring drum, overall length 2000mm, drum diameter 1000mm, 3Ph
Cato PA160 Meat grinder Serial: 327 Stainless, 300L hopper capacity, 160mm diameter throat, 15Kw, comes with various size mincing plates and brand new knives and drive belts, 3Ph
Manufacturer: Petratto Model: SC 10 Year of Manufacture: 2006 Type of Machine : Folder Gluer Find more here - / Contact us at -
Seho 8040 PCS with laminar and turbulent wave, preheating with heating plates and IR radiator, minimum quantity flux system, component cooler at the outlet, wave width: 400mm, max. usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, solder nozzle: Delta B, max. wave height: 8mm, solder volume: 400kg, heating capacity solder pot: 9kW, heating-up time 20-250°C: approx. 150min, heating-up time 190-250°C: approx. 60min, preheating zone length: 700mm, three heating zones: 3x 3kW, max. preheating capacity: 9kW, transport angle: manually adjustable, 6-8°, transport speed: 0.5-2m/min, running direction: from left to right, with loading aid/slide conveyor (1000mm), unloading aid (500mm) and entry stopper for solder frame separation, exhaust connection diameter: 2x 150mm, extraction capacity per connection: 500m³/h, supply voltage (50Hz): 230/400V, rated power: 3 ...
maximum number of results exceeded
please refine your search
