demag p 625 used for sale

In very good production ready condition: Cyklop M-PAC3, with all serial equipment and PVC plastic roll for banding.

Injector PSM 24 Dorit Number of needles: 24 Number of needle heads: 1 Needle diameter: 4mm Strokes per minute: 48 Max product height: 200mm Max capacity per hour: 800-1200kg Voltage: 400V / 50H Dimensions - packed: 130 x 85 x 210cm

Manufacturer: PFM Type: Zenith Inox Year: 2002 Capacity: ~50 pcs/min Electrical power: 4.5 kW Weight: 680 kg Optional: Piston filler with heated tank for processed cheese Condition: good, fully functional

Koppens 900mm Preduster 900mm belt width With blower Stainless steel, on wheels

Koppens Breading Machine Model: PR600C 600mm belt width very good condition

Pneumatic laboratory heating press REITZ PHP3 – used demonstration machine Pressed press 3 KN (0.3 tons) With heating device up to 250 °C and temperature control - Press force 3 KN (0.3 to) - Pneumatic cylinder make Festo - Pneumatic two-hand control - Press plate guided in 4 guide columns - Working surface between guide columns 200 220 mm - Heating and insulating plate 150 x 250 mm -Temperature - Machine table made of aluminum profiles and PA plate 60060060mm - Total weight approx. 100 kg - Mobile with 4 swivel castors, 2 of which with brakes . Suitable for foil pressing and embossing under heat.

technical details:: new parts special accessories: original parts machine: Ryobi mm Big stock of new and original Ryobi parts for all offset presses Just asking for with spare parts number and model of the machine Big Discount possible! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Kennametal Diameter: 500 mm Number of teeth: 62 Available quantity: 2 pcs.

Machine to combine book blocks with book covers Equipped with Metris MT P120vB Book height : Standard 80 - 340 mm (XL 80 - 450 mm) Book thickness : 110 - 450 mm Block thickness : 2 - 80 mm Output : 200 - 300 books/hour

System designation D8-IPS700 Configuration in-line 6 Crankshaft power, kW (hp) 405 (550) 2900 rpm Propshaft power, kW (hp) 384 (523) 2900 rpm Aspiration Twin entry turbo and compressor

System designation D8-IPS800 Configuration in-line 6 Crankshaft power, kW (hp) 441 (600) 3000 rpm Propshaft power, kW (hp) 419 (570) 3000 rpm

Product designation D6-IPS650 Crankshaft power Kw/Hp 353 /480 Propshaft power, kW /Hp 339 /461 Engine speed, rpm 3700

Saw blade diameter: 275mm, cutting range round (90°): 100mm, cutting range flat (90°): 160mm/80mm, speed: 40rpm - 80rpm. On-site inspection is possible.

Vertical Grinding Machine, Surface Grinding Machine DORMAC / DORIA Type PerseoCup Grinding MachineFabr. No. 786 Year of construction 1987Grinding area 500 x 250 mmMagnet 400 x 150 mmGrinding height Grinding wheel - magnet approx. 190 mmGrinding height Grinding wheel - clamping surface Table approx. 235 mmGrinding wheel diameter 175 mmTable longitudinal movement approx. 600 mmGrinding wheel speed approx. 2800 rpm. Motor power approx. 2.2 kWNerg connection 380 volts, 50 Hz manual depth delivery via handwheel, travel per

Drilling capacity (steel): 100mm, max. pitch circle diameter: 7000mm, spindles: 2, spindle speed: 3000rpm, spindle mount: ISO 50, drill carriage stroke: 900mm, feed: 6m/min, power: 125kW. Machine dimensions X/Y/Z: approx. 13000mm/11000mm/5100mm, weight: approx. 18000kg. On-site inspection is possible.

Turning diameter over bed/cross slide: 530mm/280mm, center height: 264mm, center width: 2000mm, bed width: 370mm, speed: 2000rpm, spindle bore: 80mm, tool shank dimensions X/Y: 25mm/25mm, cross slide travel: 300mm, quill diameter: 65mm, quill stroke: 180mm, repeat accuracy: +/-0.008mm. The machine has an electrical problem on the tool head. Documentation available. On-site inspection is possible.

A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible

X-travel: 600mm, y-travel: 500mm, z-travel: 540mm, max. distance-table: 690mm, feed: 40m/min, table dimensions: 700x500mm, max. workpiece weight: 800kg, controls: Heidenhain TNC 620, connected load: 18kVA, length: 2240mm, width: 3338mm, height: 2803mm, weight: 5.6t, with documentation, has not run much.

Sanding length: 700mm, sanding width: 330mm, max. workpiece height: 450mm, table dimensions X/Y: 280mm/600mm, table speed: 25m/min, sanding wheel dimensions: 305mm/25mm/76.2mm, spindle power: 3PS, machine dimensions X/Y/Z: approx. 2100mm/1600mm/2000mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Grid plate X/Y: 342mm/424mm, viewing window X/Y: 280mm/200mm, max. component dimensions X/Y/Z: 342mm/424mm/275mm, Z-axis: 235mm, machine dimensions X/Y/Z: approx. 600mm/550mm/810mm, weight: approx. 90kg. Controller & marking head: LP-RV200P, laser type: FAYb, laser class: 4, wavelength: 1.06µm, average output power: 20W, marking dimensions X/Y: 90mm/90mm, working distance: 190mm, writing speed: 12m/s, conveyor belt speed: 240m/min. Integrated pilot laser included. Documentation available. On-site inspection is possible. The system is dismantled and packed ready for delivery.

A PlymoVent welding fume extraction system is available. Compressed air tank volume: 11l, compressed air quality: class 6, operating pressure: 4bar-5bar, compressed air consumption per pulse: 40nl-50nl. Documentation available. On-site inspection is possible.

Suitable for edge preparation of all types of cutting tools with the corresponding holders and turning devices, e.g. roll cutters turning devices, e.g. cylindrical milling cutters, saw blades up to 380mm diameter, shank tools, indexable inserts and saw band coils up to 750mm diameter. Number of units: 1, table pitch circle: 600mm, table outer diameter: 800mm, machining width/height: 180/ 250mm, feed rate: 0.5-6m/min, flakkotier power: 4kW, connected load: 6.4kW, length: 2500mm, width: 1950mm, height: 2500mm, weight: 3t, operational hours counter: approx. 100h. Including documentation, without accessories or spare parts. On-site inspection is possible.

A Peddinghaus cutting and notching system for mitre cutting and weld bevel preparation is available. The main component of the system is the CNC 5-axis notching machine Peddinghaus SACM-1250/A, year of manufacture: 2019. The system is suitable for small to medium-sized steel construction. Intended use: Standard notching, flange thinning, web openings and other common notching shapes. Documentation available. On-site inspection is possible.

Stations: 6, power: 40kW, control: Siemens. Including upstream Fischer separating head, Festo feeder, material discharge conveyor, Knoll 450K-1 chip conveyor, year of manufacture: 2004, chip preparation with ejector and hydraulic unit. Documentation available. On-site inspection is possible.

An old extruder with L. Pfeiffer motor is available. Motor power: 9kW, motor speed: 1485rpm, rated current: 15.1A. On-site inspection is possible.

A rotary transfer machine for the production of spherical ladles is available. Machining stations: 13, bar loader: 0433, bar loader length: 3000mm, machine power: 40kW, control: Hydromat. Including Bosch hydraulic unit, Knoll 450K-1 chip conveyor, Müller CL206-B lubricant preparation system and separate Knoll chip disposal system. The machine was extended to SW milling in 2015. Documentation available. On-site inspection is possible.

A Panasonic laser marking machine (laser marking station) with a defective laser head is available. Travel X/Y/Z: 500mm/430mm/350mm, marking range X/Y/Z: 720mm/430mm/350mm, machine dimensions X/Y: approx. 800mm/1900mm. Documentation available. On-site inspection is possible.

Proseal PR30, Very simple compact traysealer with a high output with its rotating table system., Have a look at the video for an impression.

A Maka CNC 4-axis milling and drilling machine for plastic, wood and aluminum is available. Travel X/Y/Z: 2000mm/6000mm/250mm, C-axis: 360°, rapid traverse X/Y/Z: 45m/min/45m/min/24m/min, spindle mount: HSK63, spindle power: 12kW, spindle speed: 24000rpm. Tool places: 12, angle head places: 3, machine dimensions X/Y/Z: 12000mm/5700mm/3200mm, control: BWO 920, documentation available. On-site inspection is possible.

Niro-tech RX-150 single shaft paddle mixer, This RX-150 is made of stainless steel. The machine allows mixing in both directions. It is equipped with a single mixing shaft and moisture proof button control panel. Motor power 1.5 kW provides 5-48 rot. /min. The tank capacity is 150 liters, which allows filling it with 110 kg of meat. Unloading provided by tilting the drum to about 96 degrees. The mixer adapted to unloading directly to the standard buggies of 200 liters capacity., The dimensions of the machine: 1300 x 700 x 1600 (all in mm)

POLYTYPE BDM 482/ 920 upto 8-Colors, only 6-Color-Heads mounted, Cup Printing Line, age 2014 Consisting of:-, Inclined Conveyor Feeder (acts also as an Accumulator), Servo Motor Universal screw Denester, ARCOTEC CG30-2 Corona Pretreatment System with Leak Tester, 8-mandrel Indexing Turret, with Mandrel Holders for Cups, UV-Top (Leutkirch, Germany) VARIUS Powerjet BIF 1/ 815, 8 kW, UV Curing-On-Mandrel, 6 x individually hinged dry-offset Print Heads. (2 Extra Print Heads can be retrofitted), Each Print Head consisting of Print cylinder, radial and axial Print adjustment with micro-register during operation of the Printer, 2 x Form Rubber Rollers dia. 71 and 100 mm, 2 x Oscillating rollers, 2 x Idler Rollers, 1 x Ink Transfer roller (Ductor Roller), 1 x Ink Fountain with Ink Stirer., Ink Washing System on Print Heads, Positive Blow-off, final dual Timing Belt take-off Conveyor to counter S ...

PRIMULTINI hydraulic log carriage, type CFE, Consisting off:, PRIMULTINI hydraulic log carriage, type CFE, - 5 pc. hydraulic headridges, - Distance between headridges 1300 – 2250 – 2250 – 2250 mm, - Opening headridges horizontal 1000 mm, - Opening vertical of clamps 900 mm, - Each headridge with double hydraulic centering pad, - 4 pc. integrated hydraulic log turners, - Total length carriage ca. 8500 mm, - For log length 10 meter, - With rails, length 25.5 meter, PRIMULTINI hydraulic driven rope feeding, type IFB, PRIMULTINI control unit with Mudata controller and electric cabinets

table load: max. 40 t t with manual operation panel: ja weight of the machine ca.: 22 t : 1918 Year: ca. 1990 Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2009 current intensivity: 300 A wire dia.: 1 mm : sofort einsatzbereit : 239836 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Pfauter vertical CNC gear hobbing machine is available. Modules min./max.: 1/3, max. workpiece diameter: 150mm, max. tooth width: 150mm, milling head tilt: +/-45°, milling cutter axis-table axis distance: 10mm-160mm, table diameter: 160mm, table bore: 63mm. Tool holder: SK40, max. cutter diameter: 130mm, max. cutter length: 220mm, speed: 600rpm, feed: 1500mm/min, tangential path: 170mm, rapid traverse: 3m/min. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/2500mm, weight: approx. 6500kg. On-site inspection is possible.

turning diameter: 10/300 mm turning length: 1500mm +/-0.1mm mm control: serial number: 53364 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: . mm plate thickness: . mm serial number: 20719 total power requirement: . kW weight of the machine ca.: 1,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

volt: 380 V weight: 1,4 t : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: PELI 1400 : ja : ja : : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: 5 t condition: gut amount: 2 auf Lager Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6 Meter weight of the machine ca.: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 5 weight: 5 t : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 170 mm plate thickness: 0 mm number of rolls: 0 weight of the machine ca.: 0,1 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: mm grinding length: mm centre height: mm oil mist extraction: ja serial number: 2342-11 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 63 mm square edge steel: 55 mm flat steel: 100 x 25 mm : engine: 380 V, 6,3 kW weight: ca. 2.450 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pulling force - max.: 0 t dayligth: 0 mm wire dia.: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Compression & tension spring tester 5 kN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 160 - 1.600 mm gear width: 250 mm max. module: 20 min. module: 1,5 total power requirement: 1 kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mm saw band length: 4670 mm cutting width: 580 mm total power requirement: 7,4 kW weight of the machine ca.: 3 t Sawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mm Length of cut, min./max. 0 - 580 mm Distance from column to saw band, max. 690 mm Cutting speed, infinitely variable 16 - 160 m/min Dimensions of saw band, length x Ø approx. 4,670 x 38 mm Length of remaining pieces, automatic/single cut 100/10 mm Saw blade drive, approx. 4.4 kW Total electrical load, approx. 7.4 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features: Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. Infinitely variable settings of sawing feed with display of the current cutting speed. Workpiece counter: Number of workpieces can be preset. Selection swi ...